I am new to Ubuntu and (v 8.10). Stupidly fiddling around with fstab I changed something and when I rebooted the x server would not start (some internal error)
I believe this is because I changed fstab, and so the drive is read only. I can access the partition from ubuntu installed in windows but cannot change the file. How do I sort out the permissions?
Here is fstab, i assume the bold part is the issue code...
I know, Songbird does not currently support Linux... I got the x64 .deb file off this website (http://skyzim.com/songbird-1-4-3-installer/) and installed it without issue. I got it up and running then screwed something up with the graphics and needed to reinstall. Now when I get the same file off the website, install it, then try to run I get an error "GLib-ERROR **: /build/buildd/glib2.0-2.24.1/glib/gmem.c:157: failed to allocate 14145530384 bytes". I tried doing a sudo apt-get remove libvisual-0.4-plugins as was recommended elsewhere to no avail. Anyone know how to get songbird up and running again? I did a "Removal" through synaptic to uninstall the first time, perhaps that is an issue?
View 1 Replies View RelatedToday I downloaded an update (can't remember which ones they were exactly) and afterwards I was told I needed to restart my computer. But once this happened I couldn't even get to the GRUB menu. before the grub menu was supposed to appear I got this error message
"error: no such device: /ubuntu/disks/root.disk" and
"error: no such device: /ubuntu/install/boot/grub/grub.cfg"
afterwards I get to some command line version of grub where I can type in commands like "reboot" but i don't have my old menu where I just selected the kernel I wanted. I have a dual boot with Wubi if that makes any difference. Does anybody have a way I can recover my copy of Ubuntu, or will I need to reinstall?
I recently installed GTK-Recordmydesktop to record my desktop, and it doesn't play correctly in Totem. So I installed VLC. It won't open at all no matter how many times I click it. I tried in a Terminal, I got this code...
View 1 Replies View RelatedI have following error when trying to lauch Icecast:
Starting icecast2: start-stop-daemon: Unable to set gid to 121 (Operation not permitted)
I have recently added a second screen and uses separate X screens as my x screen settings. No xinerama. After adding the display Vino refuses to start. IIRC using dual X screens with xinerama works as expected.Starting it manually results in code...
View 7 Replies View RelatedUbuntu 10.10 w/ dual NICs
here's my etc/network/interfaces file code...
Here's the problem -- DHCP wont start and throws the error "Can't create PID file /var/run/dhcpd.pid: Permission denied." Somewhere I found a post that indicated that the following corrected the issue (I dont really know why):
ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid
dhcpd3 -cf /etc/dhcp3/dhcpd.conf eth1
When I do the above DHCP will start (in theory, at least no erros are thrown). But if I ask DHCP to restart, it will stop, but not restart. And the error is "No subnet declaration for eth1 (192.168.3.2)"
I'm newbie-ish. Help me Obi-Wan Kenobi.
I have fedora 10 and vista in my system. however,all was working fine ,but suddenly today when i tried to boot into fedora , i found that the avahi demon was not starting , and when the systemn booted , a message was shown that thre wasn't enough memeory space , and a blacjk scereen was shown , then i booted into vista and tried t acess the linux partiotion by Explore 2f software... At first it showed not enough memory space , but on rescanning the partition,it is showing the /boot folder.So how do i delete some data in fedora ?
View 1 Replies View RelatedI just installed F12 on my machine. Installation worked fine, system boots and then the trouble begins. There are many programs that fail to start, all of them have the same error-message when I start them from my terminal code...
Do you have any idea what might be wrong with my system?
All connections on my computer start loading and then hang: it happens when running apt-get update (a few repositories load successfully and then it hangs at a random one) and when loading web pages with the browser (it says "Connecting...", then "Waiting for....", sometimes some part of the page loads, and then it hangs).
This happens both with my wired and my wireless connection. It does not happen on Windows on the same computer.
Any idea on what it might be?
Tftpd doesn't start with xinetd ,unable to catch where the error is ?
View 2 Replies View RelatedUpon running miro (openSUSE 11.3 and arch) I get the following error code...
View 6 Replies View Relatedi want to know what is use or benefit of using s and t permission?i have used them but could not understand its uses.please explain me with suitable example.Also tell me about umask command to flag on s and t.
View 1 Replies View RelatedSince I began using F11, Midnight Commander takes a life to start. Previous versions of Fedora didn't give me any problem. I know many of you don't use it, but for those who needs MC, anyone is having the same trouble? F11 x86_64.
View 1 Replies View RelatedMy Torrents will not start due to a "Permissions denied" error.The folders with the files being download have it set 777, so I'm thinking it's something else.When I look at the auth log, It does appear that it is that folder causing the issue.I can keep guessing the cause of permissions, but I do not know how to trace the problem.
View 1 Replies View RelatedI have installed Opensuse 11.4 and the desktop won't start i get an green striped screen, i have tried to run yast but it seems mine NVIDIA isn't correct installed.
I have an NVidia SE6150 Graphic Card and i have tried to configure the startup parameter vga=0x317, i have changed this to vga=0 to get vesa mode but that doesn't work, i have an wide screen monitor that supports 24 bit and 1360x768.
my ENTIRE hard drive now has user AND group permissions root. I can't start X and are having various permissions issues. although ive been using linux for a long time.
long story long, I did a debian netinst to my netbooks SSD. got everything EXACTLY as I wanted it, was very happy with my first go at debian but of course being a linux dork im always willing to tweak. I installed onto btrfs which I recently learned supports compression which not only saved precious SSD space (only 8GBs) but according to some benchmarks also improved performance. this was a boot option and would only start compressing new files. this, of course, could not be good enough. so I formatted my SD card btrfs, mounted it with compress option + my SSD defaults and copied over all files that weren't a mount (i.e. proc, dev, sys,...) however I forgot to copy permissions. so every file was copied with root:root ownership and I didn't realize this when booting to the SD card to verify things were working as I assumed ( never do this ) that getting to a login terminal was enough. So now I need to fix all permissions and I would really prefer it be without a clean install.
A netinst can take a dec amount of time and I had a lot of tweaking to do since I only used Xorg + i3 tiling wm. there has to be a way to fix this...I started trying to reinstall all the packages but kept running into issued where aptitude wasn't able to reinstall things like bash or perl-base, presumably bc they were in use or had incorrect permissions set
Having to write my user password every time I want to do anything. I DO know I'm doing something risky for the system, that's why I have Linux. Is there a way to avoid to rewrite the password again and again, like start with superuser permissions?
View 2 Replies View RelatedI installed Sun's virtual box 3.1 under Ubuntu 9.04. It worked flawlessly. I upgraded to to 9.10 and know I get a kernel error. rc=-1908 Now I cannot get Windows to load.
View 2 Replies View RelatedOne of our client was complaining that their server was down and mysql and apache services were down. The server is Ubuntu 8.04. When we checked, the permissions of /etc/init.d/mysql and /etc/init.d/apache2 were changed to 644 from 755. How could this be possible?I need your valuable suggestions on how can i monitor whether any malicious intrusions or scripts are running.
View 2 Replies View RelatedI re-installed ubuntu 10.04 for prep I did a backup with Simple Backup Config after reinstalling i restored with Simple Backup restore some installed software software now doesn't start and after troubleshooting i think problem is file permissions but i'm not sure which permissions of which files to change and what they should be changed to. has anyone had experience with this and if so is it because it works or because its the right way to do it and it works funny thing.. i can't find any forum posts with info on Simple Backup!
View 1 Replies View RelatedI've got a new server machine: Fujitsu-Siemens PRIMERGY TX150 S6.
I've tired to install CentOS 4.4 linux from DVD. This DVD is OK, because I installed from it a couple of days ago. Installation process starts but after some steps it gives me something like this code...
I have set up DNS server set up on my RH 5.5 system. It is working perfectly as Caching only Server but but when i tried to make it a primary server for a zone it didn't resolved. I am actually a newbie so please correct me if i am wrong somewhere. Here are my configuration files code...
View 10 Replies View RelatedI am using Postfix on CentOS to send mail through a relayhost. The mail sends fine, but on certain clients such as the mail client on the iPhone or Windows Live Mail, the message is received with '(No Sender)' in the sender field. The Apple Mail client on the iMac works just fine.
Here is the PHP code I am using to send the mail code...
Wondering if there is a configuration setting in /etc/postfix/main.cf I can use to fix this problem. I have scoured the help files but have come up empty.
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
After I finally successfully installed ubuntu, I cannot start Windows from the GRUB start menue.
Since I am an absolute beginner
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?
View 2 Replies View RelatedI have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....