Ubuntu Networking :: All Network Connections Start And Then Hang / Sort It?
Apr 4, 2010
All connections on my computer start loading and then hang: it happens when running apt-get update (a few repositories load successfully and then it hangs at a random one) and when loading web pages with the browser (it says "Connecting...", then "Waiting for....", sometimes some part of the page loads, and then it hangs).
This happens both with my wired and my wireless connection. It does not happen on Windows on the same computer.
Any idea on what it might be?
View 6 Replies
ADVERTISEMENT
May 31, 2010
I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
View 2 Replies
View Related
Jun 10, 2011
I'm still pretty new to the linux scene but kubuntu has been a great alternative to ubuntu (unity, ugh) until now.
It only started happening since i started messing around with play on linux but i dont think their related. I dont think its a driver issue either as ive switched between proprietary and default to no avail.
Basically after i log in, it takes over 3-6 minutes getting slower and slower before finally getting back to regular speed. So after a few occurences i decided that immediately after startup i went to system monitor and sure enough;
There is a process title "akonadi_contact" that is slowly growing in memory. There are also multiple occurences of it (usually between 6 and 9). they keep growing usually to the 500000k mark in memory usage before turning gray (swap storage??) and then eventualy the end.
What is "akonadi_contact"
How do i stop this from happening.
Is this a memory leak?
View 4 Replies
View Related
Aug 7, 2010
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
View 4 Replies
View Related
Aug 23, 2010
Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
View 4 Replies
View Related
May 30, 2011
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies
View Related
Jan 30, 2010
Here is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:
Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00
[code]....
View 2 Replies
View Related
Jul 8, 2011
i've installed ubuntu 11.04 on a friends Asus Eee pc 1005HA netbook. after the installation i tried to connect to the router using wireless, and when i enter the key, it fails to connect, so i tried using an Ethernet cable to connect but that doesn't work either,the network devices on the computer are:
Atheros AR8132 PCI-e fast ethernet controller
Atheros AR 9285 wireless network adapter
It lists the wireless device and the solutions to the problem, however, the solutions seem to be for Ubuntu 10.04 and also 10.10, and im not sure if it will work for 11.04 so far i have been unable to find out anything on the forums about the ethernet
View 9 Replies
View Related
Jun 18, 2009
once I updated , there will be no connections to Internet in GUI , while it's available in TUI . So it's wired , huh ? Before upating, it's available both in TUI and GUI, though all the time the network-manager shows no connection , in fact , there is and both GUI and CUI . Now I updated , and it can't access Internet from GUI.
View 2 Replies
View Related
Mar 17, 2010
Is there a way to log specific type of network connection with timestamp? I mean, if someone sends a mail through mail server, is there a way the server logs that connection with timestamp?
Example:
2010-03-17 14:10:12 <server>:25 <client1>:<port1>
2010-03-17 14:10:26 <server>:25 <client2>:<port2>
2010-03-17 14:13:09 <server>:25 <client3>:<port3>
2010-03-17 14:15:43 <server>:25 <client4>:<port4>
...
...
...
View 1 Replies
View Related
Oct 29, 2010
I'm having trouble running 2 network connections on an Ubuntu 10.10 machine. My wireless connection provides my internet access and is assigned the ip 192.168.1.7 My ethernet connection provides access to a separate network containing a nas box/server. The ip address for this is 192.168.5.100 When I am only connected to the wireless network, the internet works fine. However, once I connect to the ethernet network, I lose internet access via browsers and email client I cannot ping external web servers. It doesn't appear to be an ip address conflict so I'm at a loss as to what is causing my internet connection to drop.
View 8 Replies
View Related
Sep 20, 2010
I am total newby in Ubuntu 10.04. I have just installed it in my office where I have two networks card one connect to a router giving the internet access and the other connected to the windows based work network providing access to the work network sources. In XP everything works fine as I can keep both connections alive and have the results I want.
However although I don't know how to do it in Ubuntu 10.04. Till now I have setup the first connection directly to my router and I have internet access but I cannot set the other one. Another question is how I can force ubuntu to use the router connection as the default one when I log in.
View 5 Replies
View Related
Jan 24, 2011
Since I installed ubuntu 10.04 I dont see my eth0 card in System->Preferences->Network _connections. Everything works fine but it puzzles me. In ifconfig iI just see the eth0, networking seems to be working fine, but it keeps puzzling me. Adding theinterface is no solution: add it and it doesnt show again
View 4 Replies
View Related
Jun 14, 2011
Using xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.
View 3 Replies
View Related
Jul 4, 2011
i'm currently using ubuntu 10.04 and wanted to update to 11.04 and that means backing up all sorts of data and configuration.Regarding the wireless configuration list, i have a few with password and auto connect, i wanted to know if there is a way of saving that listconfiguration other then manually.
View 3 Replies
View Related
Dec 18, 2010
I have just installed Ubuntu 10.10 64bit on my laptop Toshiba Satellite A665-S6065 and I can connect to wired network but I can not connect to wireless network "Network Connections disconnected". Im following this post http://ubuntuforums.org/showthread.php?p=6183681
1. Machine Brand and Model (PC/Laptop): Toshiba Satellite A665-S6065
2. Wireless Brand, Model and Wireless Chipset:
Code:
lspci
Output:
Code:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
[Code]...
View 3 Replies
View Related
Dec 20, 2010
How to check Linux server network connections generally?
View 3 Replies
View Related
Feb 11, 2011
I messed up my Network Connections when I put a different NIC in my computer. Now I just went back to using the old NIC. It shows up in ifconfig, but the GUI Network Connections is blank. When I manually Add the connection back to the GUI Network Connections, the settings are not reflected when doing ifconfig.For example, I change the IP address for eth0 in GUI Network Connections, save the settings,
View 6 Replies
View Related
Feb 25, 2011
I have a bunch of Ubuntu boxes on one subnet, 192.168.1.0. I have a Windows 7 box on another subnet, 192.168.2.0. I am able to ping and SSH to all servers on the .1 subnet except for one server, which I will call PITA. I will attempt to SSH to PITA, and it won't respond, nor does it respond to pings. I will the SSH to PITA from another of the test servers, successfully connect, and then when I SSH from my Windows 7 machine I can connect successfully. If I first connect via console to PITA and send some pings out (to anywhere, like 4.2.2.2), I can also connect from my Windows 7 machine. I've never seen anything like this.
One of the weird things is that I used PITA to create an image that I then used to create many of the other test servers, and they work fine, so I'm not sure what the problem is. I've checked /var/log/messages and syslog and there's nothing in them that indicates a problem. I've rebooted this server, restarted SSH, changed the IP in case it was conflicting with something else, forced an ARP update in case it was cached (since I had bonded the interfaces), cleared the ARP cache on my own machine, verified Network Manager is not installed...and I still have this issue.
Here are some network-related config:
/etc/network/interfaces
Quote:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 3 Replies
View Related
Jul 30, 2011
I am running Ubuntu 9.04 as a partition with windows 7 on a acer aspire 5742, I would like to connect to the internet in Ubuntu, wirelessly, but I am unable to turn my wireless on in Ubuntu, and network manager says "no network connections available". I have the following network adapters:
Atheros AR5B97 Wireless Network Adapter
Broadcom NetLink (TM) Gigabit Ethernet
Microsoft Virtual WiFi Miniport Adapter
View 9 Replies
View Related
Feb 11, 2009
Code:
[bee@localhost ~]$ ulimit -a | grep files
open files (-n) 1024
that open files value set to 1024, but is it valid only for real files ("file handles/descriptors" of files on your filesystems: hd partitions / cdrom / floppy / usb devices) or does it counts also network/sockets connections? i'm just asking without a reason. it's just curiosity ... as you can see sockets with lsof, somebody like me could think connections are counted as they were "files" by ulimit too
View 9 Replies
View Related
Aug 8, 2009
I want to write a custom rule to allow all connections to the ip addresses on my local network (192.168.2.2 through ...99) but I don't know how. I know adding a custom rule asks me to read a file and put it in "iptables" format, but I don't know how...
View 5 Replies
View Related
Mar 5, 2010
I have a machine that I'm trying to setup as a reverse web proxy. It will have two NICs, eth0 will face the public network, and eth1 will face the "internal" network (connects to a switch that goes out to the other web servers that are statically assigned a private IP address).
When both interfaces are started, I can ping hosts on the 1.2.3.0 network and the 192.168.10.0 network without problem when doing so by IP, but if I try to run a ping or nslookup command with a DNS name, it does not work. I've tried commenting out my entries in /etc/resolv.conf and adding the DNS entries in the /etc/sysconfig/network-scripts/ifcfg-ethX files directly (DNS1=x.x.x.x and DNS2=x.x.x.x), but the results are the same.
View 2 Replies
View Related
Dec 4, 2008
What I want is quite simple, I have my PC running Linux Mint 5 (Elyssa), and I would like to connect it to both an internal network, which has a file/print server, another machine and will soon host a small cluster. I also have a wireless router connected to the tinterweb.
The thing is using my ethernet I want to connect to the internal network whilst simultaneously using my wireless to deal with the internet, I want to keep the internal network off the net as it really doesn't need to be connected. I can connect to my internal quite happily and also my wireless but not both at once.
View 5 Replies
View Related
Aug 28, 2010
I just bought this usb wireless adapter. (I also have a mac using wireless here and it works fine.) I installed ndiswrapper and ndisgtk and then used it to open the .inf file on the driver cd that came in the box. It must have worked reasonably well because if I click on network manager, I can see a number of networks, including my own. However, when I enter the security key for my network the icon spins for a while and then it asks for the key again. I've tried repeatedly and it never connects. I am definitely entering the key properly because I re-entered it on my mac and it worked.
I have attached a document with most of the information requested in the sticky.
View 6 Replies
View Related
Oct 13, 2010
I have Windows XP with a gigaset adapter which connects to wirelessly to a Belkin router. I'm with Virgin Media.
I installed Wubi Ubuntu to try it out, and it all worked perfectly accept no wireless networks, not even nextdoors were listed.
It's enabled but it says it's disconnected. I have no idea what to do.
Is it recognizing my adapter?
View 3 Replies
View Related
Feb 20, 2010
I'm a new user of Ubuntu, so i'm not that familiar with this OS. My wireless network is detected but when I'm entering my 128 bits WEP key, it doesn't connect at all. I have no clue where to start troubleshooting.
Here's some of my specs if that's of any help:
Computer is a Sony Vaio laptop model VGN-SZ370P
My wireless card is from Intel Corporation 82801G (ICH7 Family) USB UHCI Controller
The ethernet cable connection used to work before, but I fooled around with some commands and now seems to be disabled...
View 4 Replies
View Related
Oct 27, 2010
I followed this tutorial => https://help.ubuntu.com/community/OpenVPN
I'm working on ubuntu 10.10 OS
So everything is ok when i start the tutorial with my interface on code...
The only way I can make it work again is by setting the interfaces back to
auto lo
iface lo inet loopback
>> then reboot
and after that put back the br0 settings in the interfaces en restart the network.
View 4 Replies
View Related
Jan 9, 2011
My machine is running in Pentium(R) 4 CPU 1.7Ghz, Nvidia legacy Riva tnt/tnt2 and a 512mb ram. I have a Network adapter, Realtek RTL8139 Family PCI Fast Ethernet NIC. I have installed Ubuntu in my Window Xp, and used the ACPI workaround to install ubuntu on my PC. Now that I have installed Ubuntu, when I try to boot ubuntu, it always hang before it start to boot.
View 5 Replies
View Related
Jan 4, 2009
I have installed Fedora 8 on an old PC to use as a home network and I am having trouble getting a Windows PC running XP to get through to the internet, but I am able to access the internet from the Linux box with no issues. I can ping the gateway on eth0 from the Linux box, but I can't ping it from the windows PC. I am able to ping the IP address for eth0 from the Windows PC. My internet gateway is a modem/router from Hughes net. I also have a Netgear router between the Linux box and the Windows PC, but there doesn't appear to be any issues because I can ping both NICs from the Windows PC. I have pasted my Linux NIC config below. code...
View 7 Replies
View Related
