One of our client was complaining that their server was down and mysql and apache services were down. The server is Ubuntu 8.04. When we checked, the permissions of /etc/init.d/mysql and /etc/init.d/apache2 were changed to 644 from 755. How could this be possible?I need your valuable suggestions on how can i monitor whether any malicious intrusions or scripts are running.
View 2 Repliesnow my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
I changed the permissions of /etc/sudoers trying to make it writable using following command:
sudo chmod o+w /etc/sudoers
and now when i try to use the sudo command i am getting the following error:
/etc/sudoers is mode 0442 should be mode 0440
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View RelatedI use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
When I mount an external usb drive on linux (CentOs4), the permissions are by default set to read-only. Since there are multiple users on the computer who need to use the external drive, I want everybody to have rw permission for the entire drive. I also want them to be able to mount the drive if the computer has accidentially been shut down. They can use sudo mount to mount the drive, but this will only give them read permission, and I obviously don't want to allow sudo chmod.
Is there a default setting that I can change so that every new external usb disk automatically gets rw permissions?
I have a samba shared folder in my flash disk. Yesterday I installed ubuntu 11.04 and now sharing is not working any more. I do the usual procedure (that worked so far), I right click my folder > sharing options and tick "share this folder" as well as "Allow others to create and delete files in this folder" but I dont get the usual messages asking to add permissions automatically.When I try to mount my folder in another pc with linux, I get permission denied and that the folder is only readable and in another, windows cannot find the network path to my folder.My folder has about 10.000 files. asking to add permissions automaticallyI created another folder on the same flash and when I create share I get the message asking to add permissions automatically but it is not visible either. I even cant see my folder in "my places" > network, so it is not a matter of the mounting command
View 1 Replies View RelatedI have CentOS 5 running on my machine "Appro 1122hi". Now i need to replace centOS with RHEL 4.
Steps Followed is, i changed the bios setting to start booting form CD.
when i try to boot form CD i get "PXE-E61 media test failure, check cable" error
Hardware details. AMD opteron processor 248, 64 bit machine and 16 GB ram.
Vmware tells me it cannot start services.I believe the issue is tied to permissions because the message indicated the log with the full details was located in /tmp/vmware-root/setup-4772.log but when I go there I receive a message telling me I do not have permission to the directory and there's a lock symbol on the directory from the File Browser utility.What do I need to do to unlock the folder and get vmware working again ?
View 2 Replies View RelatedI have a netbook running Ubuntu Netbook Edition and I would like a USB flash drive to be automatically mounted whenever I plug it in. The drive is FAT formatted. It mounts when I plug it in but all files are only writable by my user, other users only have read access. I understand that I need to add a corresponding entry to the /etc/fstab file. I've added the following so far:/dev/sdb1 /mnt/USB_DRIVE vfat
Firstly, is that appropriate so far? I've created /mnt/USB_DRIVE as root. Next, I'm not sure what options I should be finishing the line with, especially to get all users to be able to write to the drive.
I recently got a T-Mobile Tap and I've been trying to connect it via USB to my laptop running Lucid.When I open up the icon that shows up on my desktop after connecting it, I can't run the setup files inside. It says: The file '/media/HUAWEI/checksetup.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit.When I try to change the permissions from ready only, I get: Sorry, could not change the permissions of"checksetup.exe": Error setting permissions: Read-only file systemCan I tried calling T-Mobile but they said they don't troubleshoot with Linux. They said it's an "older operating system".
View 2 Replies View RelatedI have an NFS server on Windose Server 2003. I use it to back my Linux/Solaris databases up to. I mounted the NFS share on the Linux box. I was testing the permissions to it, and accidentally did a chown sybase:sybase /OLBackupOLBackup is the root directory of the NFS share. When I did the chown command, it changed the permissions on the share. Now it seems that linux is controlling the permissions. In windose I cant add users/groups. How can I remove Linux from owning the permissions. Im not sure if this is a windose issue or a linux issue, but figured I would start asking here first.
View 1 Replies View Relatedjust be aware of this in 13.0 and previous, assigned user numbers begin at 500 by default. in 13.37, they begin at 1000. this is especially important if you have a separate drive or partition mounted as /home and you want to keep your /home data under the same user name while migrating to 13.37 (and like me are keeping a dual boot while making the transition).
View 14 Replies View RelatedI've made a really critical and simple mistake and now I am trying to recover my computer. I accidentally logged into root and was trying to change permissions for the current directory with "." but instead used a "/" which started changing permissions of everything from / recursively. I quickly realized the mistake I made after it started and aborted the process by pressing ctrl+C. However I know many things are still not right because, even though I tried to reboot and change the permissions back to 0755 from the recovery mode root console. I still get errors when gnome tries to start..Here is the exact error I am getting. "There is a problem with the configuration server (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256". I'm pretty sure because of the way I aborted or because of the time the filesystem was running with 644 permissions, some amount of damage was done. Any way to recover it to normal? Or is there a way to recover it from the Ubuntu CD?
View 3 Replies View RelatedI have Centos 5.3 on my home computer. When I was logging-in to the terminal it was like ( myname@34myhome.local$ ) now when I log-in to the terminal I get (myname@dhpdpc64$ ) I have not changed anything. It seems like my domain name has changed. Why the domain name changes automatically?
View 5 Replies View RelatedI have a recently setup my first linux server (hardy) and am having problems with the permissions for a log file being changed. I believe this is caused by syslogd, but am not sure how to correct it. Bacula will report it is unable to start a backup because it is unable to open the log file (/var/lib/bacula/log) "permission denied". After changing the owner from syslog to bacula, the backup will resume. However, the following day I encounter the same problem because the owner of the log has been changed back to syslog.I see where the permissions for logs are altered in sysklogd, but I am not certain how to make bacula exempt or if this is the right approach.
View 1 Replies View RelatedI have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express
It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.
I wrote a C++ program that uses serial port in fedora. Since normal user has no permission to read/write to /dev/ttySx, the program doesn't work. if I changed the permissions using chmod in su, it will works for that session. When restarts the permission changed to default again. So what to do a normal user program to access /dev/ttyS0?
View 3 Replies View RelatedI did a clean install from Ubuntu 09.04 to 10.04 and restored my files from tar.
Everything worked fine until I tried my weekly rsync backup.
The permissions seemed to be causing problems, so I recursively changed all the permissions in my home directory:
Code:
~/Documents$ sudo chmod -R 644 /home/wolf/
[sudo] password for wolf:
chmod: cannot access '/home/wolf/.gvfs': Permission denied
So now all the directories and files have read permission for everyone:
Code:
~/Documents$ ls -A
ls: cannot open directory .: Permission denied
~/Documents$ sudo ls -lA
[sudo] password for wolf:
total 80
drw-r--r-- 2 wolf wolf 4096 2010-05-22 20:45 career
drw-r--r-- 23 wolf wolf 4096 2010-05-02 17:17 computer_languages
drw-r--r-- 2 wolf wolf 4096 2009-08-09 23:29 .ecryptfs
drw-r--r-- 21 wolf wolf 4096 2010-05-02 17:23 misc
-rw-r--r-- 1 wolf wolf 27298 2010-05-23 13:01 next.odt
drw-r--r-- 3 wolf wolf 4096 2010-05-23 15:46 PC_maintenance
drw-r--r-- 5 wolf wolf 4096 2010-05-08 01:43 software_projects
Now I can't even look at my own directory:
Code:
/home$ cd /home/
/home$ ls -lA
total 20
drwx------ 2 root root 16384 2010-05-07 01:01 lost+found
drw-r--r-- 42 wolf wolf 4096 2010-05-23 15:35 wolf
/home$ cd /home/wolf
bash: cd: /home/wolf: Permission denied
/home$ sudo cd /home/wolf
[sudo] password for wolf:
sudo: cd: command not found
/home$
I recently upgraded from Lucid to Maverick, and I noticed that a new error message caused by a "cp" command call, including the hard links option. Fortunately, I kept the last Lucid kernel (2.6.32-25), so I could check the different behavior with booting successively on each kernel. Here are my configuration files:
On the server (192.168.1.2):
/etc/fstab :
UUID=... /mnt/Backup ext4 defaults,errors=remount-ro,relatime,async 0 2
/etc/exports :
[code]....
If I check permissions of /net/Backup/Folder2 from the client, I get :
owner = nobody (Create and Delete files), users (Access files), others (Access files)
cp -alR /net/Backup/Folder1/* /net/Backup/Folder2
- under kernel 2.6.32-25: no problem
- under kernel 2.6.35-22: all the subdirectories are created, but all empty; moreover, I get as many messages as number of files from the source:
"cp: cannot create the link ...: operation not allowed"
I can copy manually any file to /net/Backup/Folder2 from the client. Why the behavior has changed from kernel 2.6.32-25 to kernel 2.6.35-22 ? Should I modify the permissions or the way the mount is exported with options like "(no_)root_squash", "all_squash", or "anonuid", "anongid" ?
I'm using rhythmbox and a classic ipod. A couple of times I have managed to write podcasts to my ipod. I'm not sure how I did it but it doesn't last. I have tried lots of random things from forum posts. When I try to change permissions in nautilus they change back straight away. I have my name as owner and group. I have the Lynx Ubuntu OP.
View 9 Replies View RelatedI am using fedora 13. I need to start machine at 9 am and shut-down or hibernate it on 9 pm automatically. Is their is any way.In windows i found this way
View 6 Replies View RelatedIf I need certain programs such as ktorrent to start automatically on bootup, how do I do it?
View 1 Replies View RelatedI want to start process automatically For Ex:- To start snort it need the root user, So here I need a script which will start snort automatically without asking the root user or password.So that I can start snort from anywhere as same as root
View 3 Replies View RelatedI can't open my terminal anymore. I changed a preference under the Title and Command tab in the preferences of the GNOME terminal. I put a custom command instead of the normal shell, but after I closed I realized that under the "When Command Exits" menu, I chose "Close Terminal". This means that the terminal closes automatically as soon as the command is done. After I open, it finishes the command and closes. I was wondering whether there is some way to change the terminal preferences from somewhere else or reinstall the terminal, and I obviously can't use terminal commands.
View 6 Replies View Relatedmy motherboard has ati radeon 3300 hd and when i install it, after restart, my resolution is automatically changed to something big, and my monitor only supports 1024x768 and if something bigger is selected, the monitor goes NO SIGNAL
what am i supposed to do? i have some driver installed by default, i can utilize compiz just fine, play videos on ..... at 1080p just fine, play World of Warcraft almost smooth, i believe that if that driver is installed, it will be even better, but im afraid that if i install it, my resolution will automatically change to something large and my monitor will go NO SIGNAL
I just removed the gnome from the ubuntu 9.10.then i reninstall the xfce4.i am invoking the xfce4 by typing#startxi want to start the xfce4 as usual like the gnome did automatically by asking login window.
View 2 Replies View RelatedI installed Sun's virtual box 3.1 under Ubuntu 9.04. It worked flawlessly. I upgraded to to 9.10 and know I get a kernel error. rc=-1908 Now I cannot get Windows to load.
View 2 Replies View RelatedSomething has changed all my file permissions to read only and when I try and change them back it wont let me. Is there something I can do i Nautilus to correct it?
It even effects the waste basket-all the stuff in there is now read only and when I delete items I get a file operations window, which comes and then goes like its deleted them, but they re still in the waste basket, doesnt show an error message like it does if I try and move any other file.
I am using Kde 4.4 and I would like to start one of the applications automatically after every login to the system. How can I configure it? I remember I managed to find a dialog window in one of the previous versions, but I can't find it now.
View 1 Replies View Related