Ubuntu :: Wish To Wipe HDD, New Install Black Screen?

Jun 5, 2011

I've a new HDD, well new everything. Have created startup disk and memory stick. With the memory stick I had 11.04 up and running as, what is it not install, but just looking. Then ran Gparted setting up ./ ./boot, ./data and /swap. went to install Ubuntu and the screen went Black with the white cursor in the upper left corner. There is no way for me to escape from the cursor. No terminal and can't run Gparted. Have checked and move the hardware connections on the mother board.

Noticed that some felt that fsck could be part of the problem along with suggestions, but as I said I've no terminal. All I can think to do is to wipe the hard drive and start once, but my question is how to do itI briefly is, on the BIOS screen "Searching NVRAM", then the black screen, I appreciate your time and I open to suggestions as to how to correct the problem. Here is a partial lists of new hardware:ECS IC780M-A Motherboard - AMD 770, Socket AM2+, ATX, DDR2, Dual Channel, PCIe, RAID (S458-1342)1$49.91$49.91AMD Phenom X4 9750 Quad Core Processor - 2.40GHz, 4MB Cache, 3600 MT/s FSB, Quad-Core, Socket AM2+, OEM Processor (A79-9751)1$52.30$52.30Patriot PSD22G80026 2048MB PC6400 DDR2 Memory - 800MHz, 1x2048MB, Non-ECC, Unbuffered (P33-6096)1$27.38$27.38Seagate ST3500418AS Barracuda 7200.12 Hard Drive - 3.5", 7200 RPM, SATA 3G, 500GB, 16MB Cache (OEM) (TSD-500AS7)1$38.84$38.84DiabloTek CPA-0280 Elite ATX Mid Tower Case - ATX, Micro ATX, 450W PSU, 2x Ext 5.25", 1x Ext 3.5", 2x Int 3.5", 2x USB 2.0 Front Ports, Black (D15-3003)1$33.45$33.45Cooler Master Hyper N520 CPU Cooler - Socket LGA 775, AM2, AM2+, 1156, AM3, 1366 (C283-1202)1$29.99$29.99EVGA 01G-P3-1235-LR GeForce GT 240 Video Card - 1024MB DDR3, PCI-Express 2.0, DVI, HDMI, VGA (E145-0241$69.99$69.99

View 9 Replies


ADVERTISEMENT

Fedora Hardware :: Black Screen \ Can Force A Shutdown, Login And Get The Same Black Screen?

Mar 6, 2010

I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.

View 14 Replies View Related

OpenSUSE Install :: Black Screen After Grub Screen On 11.4 KDE RC 2

Mar 9, 2011

I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.

View 8 Replies View Related

Ubuntu :: Black Screen After Install?

Jul 19, 2011

it is in MS DOS-like mode after i installed it and i want to use it in GUI mode and cant figure out how to do it. also cant access my windows now in the beginning when i have to choose between ubuntu, ubuntu recovery, windows 7 and vista it tells me it cant access it

View 3 Replies View Related

Ubuntu :: 10.04 Install - Stops On A Black Screen

May 12, 2010

I tried to upgrade from karmic, the process went fine then after the last reboot, it stops on a black screen. I downloaded an iso to install from a disk, the disk runs a bit then a black screen.

View 1 Replies View Related

Ubuntu Installation :: Black Screen During 10.04 Install?

May 27, 2010

I've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.

View 9 Replies View Related

Ubuntu Installation :: Can't Install 10.04 - Because Screen Goes Black

Sep 13, 2010

I'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.

At first I tried to install it with wubi, but it won't work always the same problem.

Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.

I tried it with just installing, alternate install, but it's everytime the same problem.

View 4 Replies View Related

Ubuntu Installation :: Black Log On Screen After Install

Dec 5, 2010

After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.

View 6 Replies View Related

Ubuntu Installation :: After Install 11.04 Only Black Screen Appear?

Apr 29, 2011

after i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )

View 9 Replies View Related

Ubuntu Installation :: Will Not Install - Screen Goes Black

Jun 11, 2011

I boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.

View 5 Replies View Related

General :: Screen Goes Black During Ubuntu 10.10 Install

Feb 21, 2011

I have been trying to install Ubuntu 10.10 in my windows box.I boot with the CD (reset), it starts, I get a black screen with a small logo on the bottom.After a while (with the CD working), the screen goes blank. At this point, the machine reads some more from the CD and then stops... with the screen blank.On the hardrive I have a partition from an older version of linux (Ubuntu 8.something), just the user directories (the partition where I had Linux was killed when I reinstalled Windows).

The machine remains in that state (I've left it on overnight), no HD activity, nothing. Only response I can coax out of it is when I press ctrl+alt+del, and the machine reboots (still, screen is black, no shutdown message).

View 13 Replies View Related

OpenSUSE Install :: 11.3 Black Screen After Kernel-rt Install?

Jan 3, 2011

Installed kernel-rt-2.6.31-6.1.i586.rpm for low latency studio recordingreboot then immediately black screen.Ctrl+Alt+F1 not working Ctrl+Backspace not workingcannot get in console modeGraphic adapter : Geforce 6600Opensuse 11.3

View 9 Replies View Related

OpenSUSE Install :: 11.4 New Install, Only Get Cursor On Black Screen?

May 25, 2011

I just installed 11.4 with KDE on a COMPAQ EVO D510 SFF. The install seemed to go smoothly but after the boot completes I have only a white cursor on a black screen. The cursor moves with the mouse.At the boot menu, I can select alternatively "failsafe" and that takes me (after login) to the Linux command line and I don't know how to work that very well

View 9 Replies View Related

Ubuntu Installation :: Screen Goes Black After Beginning The Install?

Jan 12, 2010

I burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!

I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM

View 2 Replies View Related

Ubuntu Installation :: 9.10 - Black Screen During Install On SL510

Feb 1, 2010

I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.

View 9 Replies View Related

Ubuntu Installation :: 10.04 Black Screen On The Live CD Or When Trying To Install?

Apr 30, 2010

I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.

I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get

View 9 Replies View Related

Ubuntu Installation :: 10.04 Install Black Screen After One Minute?

Jul 3, 2010

I am installing 10.04 on a HP pavilion. I have downloaded the ubuntu-10.04-desktop-i386.iso (live CD). When I try to boot or install from it, the screen shows the "ubuntu" with the red dots for a minute and then a black screen with no action from the hard drive or the CD drive. I think it should be asking what language I want but presing enter does nothing.I have been using Ubuntu since 2006 and after yesterday's repartition I installed 6.06 from a live CD so I know I can install from a CD.

View 6 Replies View Related

Ubuntu Installation :: Complete Install Of 10.4 : Old PC/black Screen?

Jul 29, 2010

I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"

Code:
BIODate: 09/14/99
CPU type:celeron

[code]....

View 3 Replies View Related

Ubuntu :: New Install Black Screen After Blinking Cursor?

Oct 25, 2010

just did a dual boot install on a brand new DEll T1500. The machine has win7 on it. I booted off the live CD and all looked well. Installation went well. When I reboot, I get grub, select the top linux option and then see a small black blinking cursor for a few seconds, then nothing. The screen reports no signal.

View 8 Replies View Related

Ubuntu Installation :: Black Screen After Install U10.04.2 X64 / Resolve This?

Mar 17, 2011

I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...

Next, what happens in detail:

Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.

Next, what I have tried to fix it so far:

Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.

Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.

View 9 Replies View Related

Ubuntu Installation :: Black Screen And Cursor On Install?

Mar 17, 2011

I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.

View 5 Replies View Related

OpenSUSE Install :: Black Screen During Log In?

Sep 2, 2010

I've got a problem with my openSuse 11.3 for a few days. This is my first Linux so i'm kind of rookie.OK, let's start.I installed it something like 1 month ago and everything looks good until now. When I turn on my PC and try to login (deskop mode) login bar goes from 30% to 50% and then appears a black screen, nothing more, just deep black (cannot type anything etc.) I use GRUB - Windows, opensuse deskop mode and failsafe mode. Failsafe mode works good, but I have no idea what should I do because I didn't change anything. I even done a reinstall of OpenSuse and after one day I've got the same black screen.Someting wrong with grapfic card drivers? (ati 4850, downloaded from ati page, works good for 1 month) maybe some kind of new update which was installed automatically?

View 3 Replies View Related

CentOS 5 :: Black Screen After Install 5.4

Feb 6, 2010

I want to install a Centos Server. In the installation I choose the Gnome desktop, server, virtualization and server gui. I installed the os but when I reboot Centos doesn't appear :(, there is a black screen and it's not possible to write.

View 14 Replies View Related

Ubuntu Installation :: Install Crash - Either Locks Up Or The Screen Goes Black

Feb 8, 2010

I've been using Ubuntu for about a year or so and have never had any problems installing it up until now.

I can boot from live CD for 9.10, but if at any point I attempt to install it to my hardrive, it either locks up or the screen goes black. Sometimes I'm able to start the installer, but the screen will go blank. The most progress I've been able to make on the install was up to 98% before it locked up, every other time I've gotten a blank screen or a lock up around 40-60%. After a hard reboot I get an error that reads "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"

This problem doesn't only occur with 9.10, but with every other linux distro I've tried on it. My first attempt was with Ubuntu Studio, but I got similar errors. I've searched literally for hours and have found nary a solution that even comes close to solving my problem. using HP Pavilion a404x desktop

View 5 Replies View Related

Ubuntu Installation :: Fresh Install Boots But Screen Goes Black

May 11, 2010

I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?

View 3 Replies View Related

Ubuntu Installation :: Install To USB - Black Screen - Monitor Is On And Lit - Just Nothing On The Display

Nov 30, 2010

I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?

View 9 Replies View Related

Ubuntu Installation :: Post-install Black Screen Of Death?

May 29, 2011

I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it

View 4 Replies View Related

General :: Ubuntu 10.04 LTS - Install Fail - Black Screen - 700m

Jun 10, 2010

I decided to give Linux a try having used Windows all my life. The experience so far has been disappointing. I have a Dell 700m Laptop and am installing Ubuntu 10.04 LTS (Desktop). I have spent hours searching the internet to learn that the Dell 700m has an Intel 855 graphics card. This graphics card is apparently not compatible with the latest Ubuntu Kernel.

I was able to boot the Live DVD by pressing Enter during boot (when graphic shows), then selecting English, then pressing Esc., then pressing F6 and typing "i915.modeset=1" at the end, AFTER the two -- (it doesn't work before them per this instruction.., 3) Add "i915.modeset=1" after "quiet splash". [URL]

So after booting the Live CD, I decided to install Ubuntu to my hard drive, now the PC will not boot no matter what I do. I can still boot with the Live CD, but booting from hard drive is not possible, there seems to be no option for entering the "modeset" from a hard drive install Is there a way I can modify the modeset (on hard drive) from my LiveCD boot? Then eject the CD and boot from HD? Should I give up on Ubuntu, and use a different version of Linux? Knoppix? Fedora?

View 3 Replies View Related

Software :: Ubuntu 11.4 Install Error Message (Black Screen)

May 1, 2011

3/4 of the way through the install the reboot black screen : The disk drive for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery . neither works, was running Ubuntu 10.4.

View 1 Replies View Related

Fedora :: Black Screen After ATI Driver Install / Fix It?

Feb 8, 2009

I am running Fedora 10 on a Gateway Machine. I tried to install the corresponding drivers for acceleration but it seems to have broken the display. After the loading splash screen, the screen goes black and does not respond to anything. I did manage to see the Grub boot loader by pressing 3 a number of times while booting the machine. Any ideas for how to revert the computer to its normal display so i can try again at getting these drivers working. It is a tad bit annoying not having a display but hell, this distro is already as far as I can see 10x as good as Ubuntu.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved