Ubuntu :: Wireless Needs Enabling On Boot?
Nov 3, 2010
After my previous stint with 10.10 I've gone back to 10.04 because it boots in 20 seconds instead of 70+ and 10.10 didn't really seem to offer much new stuff that I need. Except one thing. When 10.10 boots, it automatically connects to whatever wireless network is set to Auto. 10.04 however, doesn't. I have to right click the tray applet and click on "Enable Wireless" and only then does it connect to the Auto networks. After a reboot, it's forgotten that I've clicked on "Enable Wireless" and I have to do it all over again.
I've found this thread that seems to describe the same problem and the only working suggesting is to use wicd instead of network-manager.
Does anybody know of a way to make it work using network manager? Do you know what command clicking on "Enable Wireless" runs - if I could just run that in an init script, problem solved. I thought it would be; ifconfig wlan0 up but that doesn't seem to do anything at all (wlan0 is definitely the right adapter)
View 5 Replies
ADVERTISEMENT
Apr 19, 2011
I've been having an issue for the last day or so. I have an HP Pavilion dv8000 running 10.10. Whenever I boot with the Wireless activated, it will lock about 3-4 seconds into the log-in screen (I'm guessing when it connects to my router). If I have the wireless deactivated (like now), I am able to use the ethernet connection, or (like now) use my phone to tether internet. But, as soon as I click the wireless to active, locks up. The wireless activity light flashes, but that's all.
I'm pretty good about updating whenever I use my laptop, but I think something in the most recent update may have broken my wireless connection.
View 5 Replies
View Related
Dec 11, 2010
I am using ubuntu 10.04 on lenovo g430, last night I switch off the device while it was connected to network and shut down the computer. But after that i switch on the device was disabled.I use to enable the device through Fn+F5 key which controls the device in windows but the keys does not work in ubuntu. I am using broadcom 802.11g device.
View 2 Replies
View Related
Oct 26, 2010
I've got a BCM 4312 card on a Dell laptop running 10.04 and an Apple Airport network. Since I configured the Airport to use "WPA2 Personal" Authentication, my connection is flaky: it drops for no apparent reason and sometimes I can't connect at all. When authentication is turned off, the connection is rock solid.
Here's an example from the syslog of a failed attempt to connect:
Code:
Oct 26 19:31:24 firefly NetworkManager: <info> Activation (eth1) starting connection 'Auto Rittenhouse'
Oct 26 19:31:24 firefly NetworkManager: <info> (eth1): device state change: 3 -> 4 (reason 0)
[Code]....
View 5 Replies
View Related
Apr 17, 2010
I recently installed Ubuntu 9.10 on a Lenovo Thinkpad x100e and cannot figure out how to enable the wireless internet connection.
View 2 Replies
View Related
Nov 18, 2010
My laptop (as many others) has a hardware switch which turns wireless/bluetooth disabled. If after booting up the system I switch on this key, the wireless would still remain disabled and I need to reboot the system to be able to connect to any network.
I have tried
Code:
rfkill unblock all
ifconfig wlan0 up
Is there any way to activate wireless without rebooting the system?
View 1 Replies
View Related
May 23, 2011
i cannot connect to the internet wirlessly,only via eternet cable which works fine,it tells me my wirless is not enabled
View 13 Replies
View Related
Mar 10, 2011
I just want to setup adhoc network using the wireless card that came with the box but I'm having a hard time getting it up. I have gone through a lot of posts about wireless troubleshooting but nothing has solved it. Left clicking the network manager tray icon always says wireless network is disconnected. "Enable Wireless" is checked.
Some info:
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]....
View 4 Replies
View Related
Jun 26, 2009
I have installed centos 5.2 on my acer aspire 5610z, but I do not recognize the wireless card atheros, what should I do?
View 1 Replies
View Related
Sep 14, 2010
I have a netbook and the wireless card on it works fine. Whenever I wake it up after suspending for couple of hours, it seems like the wireless card is not awaking or the drivers are not working properly because I do not see any wireless networks after waking it up(for example in Wicd). If I do fresh restart, the wireless and wireless networks come back at the same place. So I am wondering if it is possible to restart the wireless card or the driver without restarting my netbook
View 13 Replies
View Related
Jul 7, 2010
I'm running Linux Mint 9 with Gnome.
I don't want my wireless network card to be automatically enabled in Network Manager when I start my computer. I keep setting it to disabled in Network Manager but when I reboot Network Manager has re-enabled it again.
Is there some way of starting with wireless disabled until I tell Network Manager to enable it?
View 6 Replies
View Related
Feb 13, 2011
After upgrading to natty alpha I enabled the nvida graphics drivers. Now I can't boot and get stuck on a purple screen, without grub.
Can I with a live cd revert the drivers back to normal?
View 5 Replies
View Related
Aug 4, 2011
I just bought a new Club 3D (ATI) Radeon HD 3450 (8xAGP) graphics card, but received with it some problems.My Ubuntu 10.04 installation would not boot any more. It just gave a blank screen while caps- and scroll lock were flashing on the keyboard.
I then installed 11.04 which works fine except being unable to play even 720p video smoothly (the card should be able to play at least 1080p). When I enable the restricted driver ("ATI/AMD proprietary FLGRX graphics driver") and restart, the system will not boot. It gets to the point where it displays the "ubuntu" sign with the five dots below (where the dots normally change color one at a time), they all change color immediately and then the system freezes.
I realized when I received the card that it requires a power supply of 300 W, whereas the one in my PC is only 240 W. Could this cause the explained behaviour? I am not too happy about changing the power supply, unless there is real reason to think that this is the source of the problems, since I know myself well enough to know that I will probably break something in the process.
View 2 Replies
View Related
Apr 15, 2009
i've enabled quotas for a user on my fedora 10 distro but whenever i reboot the machine the boot.log contains the following message :"Enabling local filesystem after every startup i have to login as root and issue the quotaon -auv command to reenable quotas.what causes this failure on startup ? is there a workaround to solve this problem ?there is plenty of free space on the root partition that quotas are enabled.
View 2 Replies
View Related
Aug 23, 2009
Back during the early days of live usb drives (F9) before persistent overlays were not ready for prime time, I created an approach to do persistence by injecting a special rc.local file into my custom live usb spin. This script mounts a file containing an encrypted ext3 filesystem using losetup which prompts for a password.
This scheme worked well for F9 and F10 but is now broken for F11 because the keyboard is not enabled at the time rc.local is executed. Obviously, all the work done to F11 for speeding up the boot time and moving the boot to the first console has broken my approach.
View 3 Replies
View Related
Jan 21, 2011
Can someone help me with enabling the user login screen on boot up please
View 5 Replies
View Related
Sep 1, 2010
I am trying to connect my desktop to my laptop over a non-internet connected LAN, but when i enable the LAN connection on my desktop (the one with the wireless) its internet stops working.
it is a very similar problem to this except that i am using ubuntu for the machine with the two connections.
right now i have my wireless on the 192.168.1.* address space, while the LAN is to be on 192.168.5.*
note: my goal is not to share internet with my laptop, just be able to connect to it and the internet at the same time.
desktop: ubuntu 9.10 , wireless and LAN
laptop: windows xp, LAN only
View 9 Replies
View Related
Jun 2, 2010
I've one lenovo 3000 g430 4152 laptop on which i have windows but previously installed debian 5.03 and for enabling the wireless i've to download broadcom b43legacy and install it by compiling because the backports kernel doesn't work with lenovo and after installing debian accidently switched of the wireless by the slide button on laptop
but on next boot i was not able to enable the wireless either by the slide button or fn+f5 which is the key for enabling it the wireless then on some forum i got advise that i can only re-enable by installing windows because lenovo drivers are available for only windows for this model... my question is that is there any solution for it in debian and also there is one more problem that i've to press fn+f8 twice on each boot for enabling the touchpad...
View 1 Replies
View Related
Sep 14, 2010
G'day. My distro is Fedora 13. I received the above subject error message at boot. My /etc/fstab is attached as follow:
#
# /etc/fstab
# Created by anaconda on Fri Mar 5 12:44:10 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
View 7 Replies
View Related
Jul 17, 2010
I have made a computer for my 11 year old son. I installed 11.3 on the drive. It all works now except for one thing. The wireless wants to access the key ring but it's locked until I give it the password The problem with this is ntp doesn't set the time properly because the network is not up until the password is input. And even then it doesn't work because the server it attached to ( god knows where) isn't giving the correct time. I want to unlock the keyring permanently. This system doesn't run a nuclear missile silo and it's behind a pretty good fire wall. So security isn't a big concern. SO how do I unlock the hey ring to get the wireless to come up on boot?
View 2 Replies
View Related
Jun 28, 2011
I need help configuring to set my wireless to connect automatically on boot up. Right now I do have wallet on with a password.
View 1 Replies
View Related
Jan 6, 2011
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
View 9 Replies
View Related
May 11, 2010
I've just upgraded from openSUSE 11.2 to 11.3. In 11.2 everything worked fine: I've booted my laptop, logged in and turn my wireless card on using the hardware wireless button, the KDE Wallet opened up, I inserted the password and voil�, wireless connection was on.But after upgrading from 11.3, it doesn't work like that anymore. I need to have the hardware wireless button pressed to on during boot, otherwise Network Manager will not work. And yes, I do check the "Enabled wireless" option, but it doesn't work. When I tried to check it out, I found out that the wireless "Scan" button that scans and displays the available wireless connections shows nothing.So, if I forget to put the wireless on for boot, I must restart and put it on. I've tried log off and log on, and restarting some network services, but neither worked.I have an Intel Corporation PRO/Wireless 2200BG, as showed below, and I'm posting this message using it.
Result of /sbin/lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
[code]....
View 2 Replies
View Related
Aug 8, 2009
I have a server that NFS exports the /home directory out to other computers. On the desktop they all work great, but on a wireless laptop, this is where the problem occurs. The wireless enables after the person logs in, rendering the NFS export /home useless on the laptops.Is there anyway to have the wireless enable correctly on the boot so that NFS can mount properly at boot also?I'm using Fedora 11 (32bit) with a wireless router that has a security of WPA-PSK [TKIP] + WPA2-PSK [AES]. I could switch to some of the older versions if necessary to get this working.
View 5 Replies
View Related
Feb 20, 2010
I have a n2pap-lite motherboard with a AMD Sempron 2800+. My host clock is at 133mhz when it needs to at least be at 166mhz to be a AMD Sempron 2800+... I installed the system on 100mhz clock not thinking that it mattered.
I tried the following
sudo apt-get install rcconf
sudo rcconf
*Disabled "ondemand"
It says on guides that it will ask me to reboot but it doesn't, so I manually did it and put the CPU Frequency Monitor on my taskbar. It does not have the options like it shows in the screenshots to set my CPU frequency..
View 9 Replies
View Related
Jun 4, 2010
Anyone could teach me what is the "correct" method to enable the php Zip extension in a PHP 5.3 on a Ubuntu 10.04?
View 2 Replies
View Related
Mar 23, 2010
Ubuntu rocks but I am having trouble enabling PAE.
I want to do it to have my full 4Gb RAM recognized by my 32bit OS. At the moment System Monitor only recognizes 3.2Gb and the command "free -m" shows the same value.
I followed these instructions but they don't seem to work: [URL]
PS: The point is to really understand how to achieve this and not to start a debate "32bit vs 64bit OS choice"
View 3 Replies
View Related
Dec 28, 2010
on my Linux Ubuntu 8.04 machine, I recently added a new user. When ever I use it, I can't get to System~Administration~Synaptic Package Manager, for the sole reason that it does not show up in the System~Administration list. Also, some other things don't show up, such as hardware drivers.
View 1 Replies
View Related
Mar 12, 2011
I'm using an ATI Radeon HD 6850, and although drivers aren't enabled, 11.04 fits my resolution, and has animation/shadows. I need to enable drivers so games like Minecraft will run better. Whenever I install the drivers, 11.04 fails to load, or it'll just give me a barrage of glitches. How can I install the latest ATI Drivers for Ubuntu 11.04?
View 2 Replies
View Related
Mar 29, 2011
I am having a problem using my laptop's special keys to toggle my touchpad on and off on my ASUS G73JH laptop, running Ubuntu 10.10 (2.6.35-28-generic-pae).
First, some preliminaries:
My touchpad works just fine, but it does not respond to my laptop's special key, Fn+F9.
In /etc/acpi/events I have the following script, "asus-touchpad":
Code:
# /etc/acpi/events/asus-touchpad
# This is called when the user presses the touchpad button and calls
# /etc/acpi/asus-touchpad.sh for further processing.
[Code].....
View 1 Replies
View Related
