Debian Hardware :: Enabling Wireless Card Via Command Line?
Sep 14, 2010
I have a netbook and the wireless card on it works fine. Whenever I wake it up after suspending for couple of hours, it seems like the wireless card is not awaking or the drivers are not working properly because I do not see any wireless networks after waking it up(for example in Wicd). If I do fresh restart, the wireless and wireless networks come back at the same place. So I am wondering if it is possible to restart the wireless card or the driver without restarting my netbook
View 13 Replies
ADVERTISEMENT
Jan 26, 2010
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies
View Related
Jun 26, 2009
I have installed centos 5.2 on my acer aspire 5610z, but I do not recognize the wireless card atheros, what should I do?
View 1 Replies
View Related
Oct 13, 2010
I have a dell optiplex configured with an extra PCI network card, because I plan to set it up as a gateway / LTSP server, but I have troubles getting the second network card to work. It is recognized during installation (where I can choose the primary network interface) and doing a
Code:
lshw -class network
After installation shows both network cards, with network 0 being labeled Disabled. I have tried configuring the other network interface in the /etc/network/interfaces file, but it has failed to work. I have also briefly looked at udev rules, but it seems that it renames the interfaces fine during bootup, as
Code:
dmesg | grep "udev"
Shows the following
Code:
[1.138307] udev: starting version 160
[6.003002] udev: starting version 160
[7.237092] udev: renamed network interface eth1 to ethlokal
[7.253775] udev: renamed network interface eth0 to eth1
I also noticed a briefly shown "address collision" error of some sort during boot, but it never shown for long enough for me to read it through. The network card that is enabled is an Intel 825662EZ 10/100 ethernet controller, and the one that is disabled is a Realtek RTL-8139/8139C+.
View 7 Replies
View Related
Apr 30, 2011
I installed this graphics card update in kubuntu 11.04 [URL].... And when now kubuntu boots to a command line interface login screen I don't mind reinstalling to fix it, i would just like to install the latest version of the graphics card driver. I've tried twice with the same results, how i can fix it?
View 1 Replies
View Related
Jun 16, 2011
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons)
- I'm using Fedora 13 with KDE and Gnome some specs:
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Kernel driver in use: iwl3945 Kernel modules: iwl3945
[Code]...
View 1 Replies
View Related
Jul 25, 2010
I was wondering how to connect to wireless in a Linux command line environment -> I'm looking for a ncurses like program to do this, not a bunch of commands and files to edit.
View 2 Replies
View Related
Jun 21, 2010
I have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
View 2 Replies
View Related
Jan 17, 2011
I want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
View 2 Replies
View Related
Jul 31, 2011
I stupidly turned off my computer as I was updating to KDE 4.7. Now when i start it i get to the log in screen, but imputting my username and password just causes the Xserver to restart and i get back to the log in screen.I know there are many other packages I should install as part of the update and i think this will solve my problem, so i am trying to connect to wireless through the command line login, and then install the updates.
View 2 Replies
View Related
Jul 27, 2011
So i was wondering if anyone can help me connect to a wireless network via command line instead of utilizing the GUI
so far i have done this, but im not sure what to do after this
Nexus:~ # ifconfig wlan0 down
Nexus:~ # ifconfig wlan0 up
Nexus:~ # iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[Code]...
View 5 Replies
View Related
Nov 4, 2009
I run Ubuntu, and it has a nice GUI widget thing that connects me to my home wireless network when I boot. I don't have a problem with that. But suppose I don't start X, and boot to a recovery console for some reason, like I did recently when my graphics were broken after installing Karmic. In that case, my computer won't be connected to the wireless network until I log into X normally. So I can't apt-get anything or anything. It's very annoying. And I don't know how to connect to my wireless network.
I know my wireless network SSID, and I know my WEP key or WPA passphrase. How can I log onto the network with commandline tools? Is there some basic program that I can just run "networkmanager <myssid> <mywepkey>"? I looked at the iwconfig man page and I honestly couldn't figure out how to simply connect to my network. Once I figure out how to connect to the network with command-line tools, where can I put an "autoconnect" script so that it will connect during startup, like it should anyway?
What I don't understand is, why the Ubuntu network manager nm-applet, doesn't just work as a front-end for more basic networking stuff. I don't see any reason why it should require you to start X before working; it could be a daemon that runs at startup, and there could be a config-file somewhere, but it doesn't even start running until I log onto gnome.
View 16 Replies
View Related
Apr 18, 2009
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
View 1 Replies
View Related
Jul 10, 2009
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
View 2 Replies
View Related
Aug 17, 2009
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
View 4 Replies
View Related
Oct 24, 2009
in openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 9 Replies
View Related
Aug 17, 2010
In openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 5 Replies
View Related
May 14, 2010
Without Gdm (The GUI Desktop running), or an Internet connection, how does One get pppd or wvdial to connect to a wireless broadband modem?I'm SURE this can be done with any modern Distro without additional downloads...but seem to be missing some crucial step...? I've been trying things like: (scrips for pppd and chat and ln {links} ttyACM0 to /dev/modem?) the modem is definitely on ttyACM0.
ln -sf /dev/ttyACM0 /dev/modem
/etc/ppp/chat-script
#!/bin/sh
[code]....
View 1 Replies
View Related
Oct 11, 2010
The title about says it! I have a major problem on my laptop after installing updates. Some of my icons in the top panel are broken. So as a first step I need to reinstall a few things. The first step is to start the wireless connection from the terminal. So would someone please tell what the command is?
View 2 Replies
View Related
Apr 6, 2011
I've been familiarizing myself with the command line and am attempting to connect to a wireless network but am getting stuck at the point wherein I need to put in a password.When I run iwconfig I see my card is wlan0.I definitely know my password as I can connect using a GUI. The encryption method for my network is WPA2.Could someone tell me how I could connect to a WPA2 secured network via a command line, and/or where I went wrong with what I've been trying?
View 1 Replies
View Related
Jul 6, 2011
I wanted to run a little media server in my house, shared with my laptop only, so I could free up space on my laptop drive. I took one of my Linux boxes out of my render farm and loaded up a minimal install, command line only of Ubuntu Lucid from the mini ISO (32 bit). I had to plug in a lan cable to install, but I wanted to move my box back out to the "farm" that doesn't have wired access to my intranet.
After much research, trial and error, this is what worked for me. My wireless card uses an Atheros AR5001X+ chip, and it works with the desktop cd out of the box. I found the "just works" desktop install uses the ath5k driver that is now included in Lucid, but I'm not using a desktop or window manager. I haven't tried this on server version, if you do, let others know what you had to install to get it to work.
The things I do tell you about, I instruct you as if you are a newbie, however I have left out some things that users should know or be able to lookup easily, like if you want a static address instead of using dhcp. You may not need all of the steps or you may have to do more research and troubleshooting.
Find your wireless card (you may need to lookup what to do if it is not recognized at all)List all pci devices, only show network devices (-v verbose, -vv very verbose): >>lspci -vv | grep Network List all hardware (| less lets you pause at each page - arrow keys, page down/up to navigate, q to quit) >>lshw | less
[Code]...
View 1 Replies
View Related
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
Apr 18, 2010
I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something.
Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.
View 2 Replies
View Related
Mar 14, 2011
I'm thrilled using wicd to connect to wireless networks. But when I suspend my laptop using the special keys, I just want to disconnect from wireless without having to use any kind of GUI or curses user interface. It says in the documentation that wicd works by sending DBUS messages, so presumably it's possible to write a command that talks to the daemon directly.But I can't figure out how.Does anybody know by means of what shell command I can tell the wicd daemon to disconnect me from my wireless network?
View 2 Replies
View Related
Jan 7, 2010
I did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
View 1 Replies
View Related
Aug 14, 2010
I've been having issues setting up the wireless interface on my Ubuntu server (command-line only, no GUI) and I can't seem to get it working. It seems as though the card is recognized, the drivers are installed and the interface is up, but it fails to connect. I have no idea where I'm going wrong. I have WPA and a MAC filtering setup on my wireless router. An exception has been made for this PC's MAC address and I've manually entered the connection details into /etc/network/interfaces.
[Code]...
View 2 Replies
View Related
Jan 18, 2011
How do I install Broadcom Wi-Fi on Arch Linux in command line mode on an Acer eMachines EM350?
I assume that Broadcom STA should be the driver used and my USB key the way to install it with the help of another PC, assuming that I can't use a RJ45 ethernet connection on LAN.
View 1 Replies
View Related
Jan 8, 2010
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies
View Related
Sep 23, 2010
The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
View 3 Replies
View Related
Feb 27, 2011
I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies
View Related
