I'm running Ubuntu 10.10 and every time I install a program (either from the center or from the terminal), my power button turns red telling me I have to restart to complete the update and I get an error message saying: Package operation failed. The installation or removal of a software package failed.The program was clearly installed, and when I reboot, the red power button goes away.
View 7 RepliesI am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedI have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I just finished installing a dual boot XP/Ubuntu 10.04 LTS for desktop about half an hour ago, and it's my first experience with a Linux OS. Now that my *complete idiot noob* flag is flying, I have an error I think I need to report:An error occurs with the Package Manager, I get this message when I try to run it, and when Ubuntu boots:
E: Encountered a Package with no Package: header
E: Problem with MergeList /var/lib/apt/lists/
us.archive.ubuntu.com_ubuntu_dists_lucid_restricte d_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
This usually means that your installed packages have unmet dependencies I tried to download and install Chrome, and it came up with a similar error.
Is my install corrupt/incomplete or something? My setup is a P4 2.4Ghz, 512Mb RAM, onboard graphics, wireless internet and the HDD is 40GB, split into 2 partitions, and my Ubuntu Partition is 10 GB. I'm running Ubuntu 10.04 LTS distribution, and the other OS is Windows XP Professional SP3.I installed Ubuntu by using the Wubi installer.
I want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
View 1 Replies View RelatedWhen i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
I recently decided to install ubuntu netbook remix 10.10 to my Toshiba NB200. I was using windows and I wanted to completely erase them. I burned the USB, I followed every single instruction the site had, and even though the installation seemed to work, and a message to reboot my computer appeared at the end, the installation finally fails. When I reboot, the only thing I get is a black screen with an underscore at the top left corner. I tried the installation four to six times and even tried older versions as well but all I get is the black screen.
View 9 Replies View RelatedI'm having is trying to install ubuntu 10.04, when i get to the end and it asks you to click OK to reboot it never does, it sits there and never reboots (left for an hour!), forcing a shutdown and starting up then results in no GRUB coming up to dual boot (windows 7, installed on a seperate HDD)
This previously worked fine but I got rid of ubuntu to try a different flavour (which didn't install successfully, couldn't find the disk drive I wanted to install it on but I had already wiped ubuntu off for a fresh install)
I have formatted the partition i made (30gb partition) and manually created space for root and a partition from that for a swap file but this made no difference. I have used a partition manager and completely got rid of the partition (resizing the drive back up to full amount) and let the ubuntu installer do the partition itself but again the same problem.
I'm not sure what it is doing at this stage when going to reboot, i'm guessing installing GRUB and terminating the processes for the reboot, which never completes. I have also tried installing GRUB on the partition which said "Windows 7 loader" but that made no difference. I will try fixboot and fixmbr commands in windows recovery console in case it can't overwrite the boot sector for any particular reason tonight.
I have installed UBUNTU 9.10(2.6.30)
I'm trying to execute the following command: apt-get install linux-headers-`uname -r` mercurial build-essential cvs subversion libncurses5-dev
I get the following error:Package libncurses5-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package libncurses5-dev has no installation candidate
I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.
View 1 Replies View RelatedPackage Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies View RelatedI am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies View RelatedI have an old PIII laptop I wanted to tinker with. I tried ubuntu, xubuntu and netbook remix and get basically the same issue - after the install I get a prompt for login and then a user@laptopname:~$
How to fix this or is the laptop too old?
There's a strange problem, after installing ubuntu 10.04.1 using wubi.
The installation goes fine in Windows, unpacks to an empty 15gb ntfs partition. After restarting to complete the installation, it would'n find the grldr but fixed that by copying over the wubi* files installed in C:.
Now the problem, the boot screen shows for a few seconds, switches to the default ubuntu wallpaper, the mouse cursor is there and working, and that's it. The installation doesn't continue, the keyboard won't work; Also I've tried all the additional options the installation offers when it asks to press Esc.
The system:
Wubi installed size: 15gb
32bit Ubuntu 10.04.1
4gb installed ram
nVidia 9800gx2
Using ubuntu for a month on my netbook determined me to add it to my desktop so I hope this gets fixed
I just finished installing Ubuntu Server Edition 10.10. After reboot it brings me to a shell prompt asking for username and then password. After putting it in I just get a blank shell prompt. How do I get into the GUI ?
View 6 Replies View RelatedI'm trying to install the latest release of Ubuntu from the official site, 10.10.
I downloaded the 64-bit edition first to install. After burning it to a CD, it launches in my PC just fine and lets me go through the install process. I'm letting Ubuntu use up the whole HDD, so no special options are being chosen during the install. At the end of the installation, it asks me to restart and I hit OK, it closes out of the box and leaves me looking at the default background... forever.
Thinking I did something wrong, I tried again, but this time left the box to download updates and install 3-rd party software unchecked. Same thing as above, it appeared to install just fine but hung after I tell it to reboot.
Lastly, I downloaded the 32 bit edition to try, and it gives me the same error.
If I hard restart my machine after waiting on the background image for a while, it will not boot when it comes back up. My PC just remains at a screen after the BIOS acting like it's searching for bootable media.
I'll be honest that I haven't waited for over 15 minutes for it to restart. But should it really take that long?
I currently am setting up an htpc running Karmic. The problem I am having is getting my Raid 0 to be mountable. My raid is not my boot partition, but is for data storage. My setup is a zotac motherboard with three sata connectors. I have a 300 GB drive, my eSata port, and my DVD attached to these. In the PCIe expansion slot I have installed Syba 2 port Sata PCIe 1a card using the Sil3132 sata II host chipset. Off of this I have 2 1.5Tib Hdds that I am setting up as Raid 0. During the boot I enter the chipset BIOS and establish this as a Raid 0.
When I install Karmic it sees the Raid and my 300 GB drive so I install to the 300 GB Drive and everything works fine. I am able to boot to the Hdd and run the OS. I then installed GParted and setup a partition on my RAID as GPT since I want one large partition of 2.78Tib. I then Format it through GParted as ext4 and I am able to mount and access it. I then reboot the system, and can no longer mount the filesystem. What I found interesting is If I reopen GParted I can then mount it. I traced it down to the fact that the until I access GParted the Block Special Device (sil_bgabagabaedd1) does not appear in /dev/mapper. Everytime I reboot I need to go into GParted to restore the Block Special Device then it is mounted. I think I am missing something in the raid setup as to why it is not being retained. What have I missed? What do I need to do to retain the Block Special Device? Is there a boot config setting?
Edit: I did further research and found that if I do kpartx it will appear just as gparted, but on reboot vanishes. I found something similar at this thread but not comfortable in updating dmraid: [URL] I think it is related to gpt and I will try to use a smaller partition to see if the behavior changes.
I have a desktop PC with an Intel 3.2 Ghz Pentium 4 CPU. 1.5 Gb of RAM, and 2 - 200 Gb Seagate HDD (1 is Windows XP only, the other is NTFS and Ubuntu partitions). It is a dual boot system using GRUB, with Windows XP the first item on the menu.lst file, and the latest Ubuntu 9.10 kernel and previous kernels the following items.
My problems are twofold since I upgraded from 8.10 to 9.04 to 9.10 of Ubuntu. First extremely slow boot to Ubuntu (multiple minutes to get to the login screen and then almost the same after login). Over all it may take up to 5 minute to get to a usable Ubuntu running. Once I'm in to Ubuntu, things seem to be okay.
Second problem is when I reboot with the "restart" from the panel, the only way I can reboot to either Ubuntu or Windows XP is to physically turn off the power switch on the back of the computer. If I don't do this the machine never restarts it just tries to start and doesn't ever get to grub start up. After powering off, and then back on the normal reboot, with grub starting and giving the menu.lst options works fine.
looks like everything upgraded like the other upgrades I did on a couple other machines this weekend, but upon reboot, I get a mouse pointer (inop) and the little 'drum beat' audio file plays, and it goes into a loop (blank screen, pointer, audio...(repeat)...)
upgraded from 9.10 (both old and new versions are the x64 version) (my successful upgrades to 10.04 were on both x86 and x64 versions)
Lenovo T400
dual boot w/ xp (grub seems to work just fine)
I checked the menu.lst (~) for proper kernel versions as mentioned in another post, and they looked correct to me.
Just done my first ubuntu 10.04 install on a hp pavilion a320a, the install seems to have went well, though while it is shutting down and before rebooting the following error appears across the screen:
[16866.760778 end_request: I/O error dev sr0 sector 504392]
Before this error appears at the bottom of the screen the error scrolls on the screen with a different number at the beginning of the error where 16866 etc (different number each line) remainder of the error remains the same maybe different sector number but not sure, there is way too many to write down in the time they are on the screen.
I have reinstalled 10.04 several times and have the same result. After the install everything works and looks great. Then after the first power down and reboot the top menu bar and bottom panel are gone.
The desktop wallpaper (bare of anything) is there, still responds to right-clicks, etc, and the system seems to function, but the menu bar is missing. The extents of the desktop are still the same, so it's not the desktop extending outside of the screen display area (mouse doesn't disappear over the edge).
I can alt-F1 to get to the menu bar menu items, and they function - appearing from the top edge of the screen, but cannot activate them via mouse. I have reinstalled several times and this consistently happens every time. I had 8.10 on this box and it didn't do this. I reinstalled 8.10 and it was fine again, and then back to this with reinstalled 10.04. The 8.10 was a virgin install and I reformatted the drive on every install so there's no legacy crap clinging on.
I can use ctrl-alt-del to shut down/restart/etc., and alt-F2 gets me the command line. All seemingly functional.
I did a Dist-upgrade from 10.04 to 10.10 and now I have to reenable the desktop effects after every reboot. I don't know why my system doesn't keep the desktop effects, that was no problem before the upgrade to 10.10.
I ran a Geforce 6600 with the 260.19.06 nvidia driver from the ubuntu repository.
I tried to install ubuntu 10.04 on a desktop in dual boot with win XP. Ubuntu doesn't boot. It only happens after a reboot of win XP. I upgraded to 10.10 but nothing changed, i made a clean install but still it happens..I mean:
1. Power on
2. grub -> ubuntu
3. splash screen freezed
otherwise:
1. Power on
2. grub -> WinXP
3. reboot
4. grub -> ubuntu
5. ubuntu run perfectly
I've installed 10.04 on two different PC's (using two different live cd's) and after updating the software and rebooting the same error came up: in both cases the computer start and then a black screen appears asking me to enter the user and password like those old DOS systems (that is: ALL graphics are gone leaving me with nothing but a useless text prompt).
View 2 Replies View Relatedi have dual boot computer win7 and 10.04 ubuntu. i installed the ubuntu inside the win7
now i have problem that GRUB prompt out every reboot. i could get into system by type this(but GRUB come back after reboot)
Code:
set root=(hd0,1)
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /initrd.img
[Code].....
I upgraded 10.04 to 10.10. At the tail end of the install, the display locked. After an hour or 2 I rebooted the box.
Came up to a command prompt (instead of starting the GUI automatically), started the GUI, everything seemed fine.
Ran 10.10 fine for 2 days. Installed apps, got my SVN environment set, started doing development work.
I got a lockup, had to reboot....Came back as 10.04.
I have only one hard drive (/dev/sda), 4 partitions.
My new files all seem to be there, are accessible and valid. Just the OS version has reverted??!?!?!?
How do I get back to 10.10 (without doing another update, install cycle)? Surely it's there somewhere...
Looking at the grub list, only Ubuntu 10.04 is an option.Looking at the /boot directory, there are several initrd.img files that are newer than the ones associated with 10.04 in the grub/menu.lst file (i.e., Ubuntu 10.04.1 = initrd...2.6.27, whereas there are other files in the boot directory like 2.6.26, 2.6.31 and 2.6.32)
I have a PC with below configuration.cpu intel core i5 650 boxed 3.2 ghz socket 1156MB intel P55 Chipset DH55P J BoxedHDD WD SATA 2Tb 64MB cacheI installed "ubuntu-10.04.1-desktop-amd64.iso", and looks grub2 is not installed properly. I do not see all the files in grub install folder.Please let me know, ubuntu-10.04.1-desktop-amd64.iso is the right installable or not.If it is right one, how to re-install grub2 properly.
View 1 Replies View RelatedI'm trying to install ubuntu alongside Windows 7 on a HP Pavilion DV3. When I reboot I'm given the option to either boot into windows or ubuntu (this is after running the wubi program from the ubuntu website); when I select ubuntu it says that the installation will continue but the screen then goes very dark like the brightness has been turned right down. In the center of the screen I can faintly see the word ubuntu. I've tried using the hot-keys on the laptop to turn the brightness up but this doesn't work. I've also tried installing from CD but his doesn't work either and I get the same problem. This is my first time installing ubuntu so I'm not familiar with how the installation process works. Also if any other details are needed I'll be happy to give them.
View 6 Replies View RelatedThis is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'