Ubuntu Installation :: Really Slow Boot And No Reboot?
Jan 19, 2010
I have a desktop PC with an Intel 3.2 Ghz Pentium 4 CPU. 1.5 Gb of RAM, and 2 - 200 Gb Seagate HDD (1 is Windows XP only, the other is NTFS and Ubuntu partitions). It is a dual boot system using GRUB, with Windows XP the first item on the menu.lst file, and the latest Ubuntu 9.10 kernel and previous kernels the following items.
My problems are twofold since I upgraded from 8.10 to 9.04 to 9.10 of Ubuntu. First extremely slow boot to Ubuntu (multiple minutes to get to the login screen and then almost the same after login). Over all it may take up to 5 minute to get to a usable Ubuntu running. Once I'm in to Ubuntu, things seem to be okay.
Second problem is when I reboot with the "restart" from the panel, the only way I can reboot to either Ubuntu or Windows XP is to physically turn off the power switch on the back of the computer. If I don't do this the machine never restarts it just tries to start and doesn't ever get to grub start up. After powering off, and then back on the normal reboot, with grub starting and giving the menu.lst options works fine.
View 3 Replies
ADVERTISEMENT
May 19, 2010
Recently I have built an old pc using bits and bobs that have been collecting in the garage for years and decided to try and turn it into a file server, and to get some experience in networking etc. Now I had a choice of 2 motherboards for the system:
1.)gigabyte ga-8siml
2.)elitegroup l7s7a2
I first built the pc using the gigabyte board,install was successful and ubuntu server booted on restart. The only problem was,there is no onboard lan on the board and the only spare wireless pci card I found was completely frazzled. Rather than buying a new wifi card to get the system running, I thought I would try the other motherboard since this had onboard lan. The elitegroup motherboard however does not have onboard vga, so I dug out an old agp ati radeon 9200se 128m ddr tvo graphics card and plugged her in. The install went fine,but after a restart, I'm left with a blinking cursor at the top left of the screen.
If I hold down 'shift' for long enough I can bring up the grub menu,but if I select anything I get no signal on the monitor. After a while on the blinking cursor screen the monitor will time out to no signal on its own. I have tried the installation using different combinations of the options given by F6 of the first installation screen but to no avail. I have also tried installing the generic kernel as opposed to the generic-pae.
View 4 Replies
View Related
Feb 4, 2010
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
View 2 Replies
View Related
Apr 25, 2011
Using Ubuntu and any Linux OS. I installed Ubuntu using the Wubi installer. Everything went fine. When the install wizard completed and asked to Reboot Now, I did. When my computer rebooted, the Windows Boot Manager doesn't appear and it goes straight to Windows.
I'm using 32 bit Vista and have an AMD Athlon X2 Dual Core Processor 5000+. When using Wubi, the download defaults to the AMD 64 version and that is what I have installed.
View 3 Replies
View Related
Mar 18, 2010
When booting a fresh install of Karmic 9.10 grub grumbles quite a bit. I do have 2 600gb sata drives with various partitions but never have the older grubs taken a solid 15 seconds to sort out the drives before launching.
View 9 Replies
View Related
May 27, 2010
My 9.01 worked fine since upgrading to 10.04 i find the boot process hangs for about 30 secs displaying
'boot from (hd0,0)
Starting up'
I have googled this problem and the only thing i could find is that disconnection the dvd drives sorts it! but i cannot find a workaround.
View 9 Replies
View Related
May 5, 2011
my laptop's boot speed has been tremendously dropped (approximately from 30 secs to 3-4 minutes) after I've upgraded from 10.10 to 11.04.What do you recommend me to check in order to get back my lost time?
View 9 Replies
View Related
May 3, 2010
I just recently upgraded my kubuntu install from karmic to lucid and now it takes about 10-15 minutes to boot. Directly after the upgrade it was pretty slow already, but it got worse every day from then. The karmic version was a wubi install I moved to a dedicated partition using lvpm. Here are the results from the bootinfoscript code...
View 9 Replies
View Related
Aug 12, 2010
First of all i would like to inform that I am new to Ubuntu. I had Ubuntu 9.04 install on my HP Pav. Laptop with Winxp. Before some days I upgraded it first to 9.10 and then to 10.04 as suggested in Ubuntu site. After the upgrade I found that the boot up is very slow. I heard and read that Ubuntu 10.04 has very fast booting but I don't experience that, though shutdown is faster.
I read many threads on this forum about slow booting and tried to resolve the issue using those, but nothing is working. I also installed bootchart and tried to get something out of it, but frankly saying I don't understand that chat . I have 1gb of ram.
I have attached the bootchart image. Please help to find the problem.
View 5 Replies
View Related
Nov 11, 2010
10.04 boasts a very quick boot time, but after upgrading, I've been having a much slower boot than in 9.10. It hangs at the screen when it says
Boot from (hd1, 0) ext3
Starting up...
It stays at this screen for a good 15 seconds before showing me the login screen. I've attached the results from a boot info script.
View 4 Replies
View Related
Jan 22, 2011
Since upgrading my mythbuntu box from lucid to maverick my boot times have been much slower. Looking at dmesg I can see delays. Can anyone who knows more than me point me in the right direction to fix these?
Code:
[ 2.123939] usbhid: USB HID core driver
[ 2.396712] EXT4-fs (sda1): orphan cleanup on readonly fs
[code]...
View 1 Replies
View Related
Apr 22, 2011
I'm not a Linux noob, by any stretch, but this is driving me INSANE. I have an Acer Aspire 4320 laptop, and I'm trying to install 10.10 on it. The LiveCD, and the LiveUSB, take over 3+ HOURS to boot to a desktop. Then, it can't format the drive. Am I missing boot options (i.e. 'noapic') or something?
Do I set the drive in bios to ide or AHCI? (If set to ide, it takes ALOT longer..approx 45 min to get to the "run" or "install" screen) EDIT: I did manage ONCE to get to 'check this drive for errors', no killers found. (At the 'keyboard screen, I pressed 'space'). Do I need to add any other options here?
View 6 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Apr 9, 2009
I have a Laptop ( Samsung R510 Driton (Aura Series) with Win XP installed, and wanted to install fedora 10, too, as i really want to test a few things in linux and get a little knowledge there....
I Installed fedora with his guide: [url]
And as for Dual boot i also read this guide: [url]
I created root, home, swap (8 gb), usr, var all in all about 100 gb (i know its much, but i have enough space :)
After the installation, fedora wanted to restart my laptop, i let it restart and GRUB came up, i chose "fedora 10" pressed enter and the laptop just restarted....did the same thign again, andn ow fedora was about 2 secs in the loading screen and then restarted again....i've chosen windows and the laptop isj ust restarting...i tried windows again and windows is loading ....but i dont get in fedora 10....
Here are the specification of my laptop:
Quote:
View 1 Replies
View Related
Apr 16, 2010
I tried to install F12 on my new IDE-HDD. The installation completed without any errors. But, when rebooting my PC I got a dark screen with error message: reboot and select proper boot device.
No BIOS boot up issue, since booting up using other hard disk running windows has no problem at all. I have set the hardisk jumper to master/primary, tried to re-install F12 a couples of time, but didn't make any difference.
View 2 Replies
View Related
Oct 15, 2010
Just to make this clear after I installed Ubuntu 10.10 I downloaded everything and updated everything but when I booted into my Windows side I was shocked that the boot time was so freaking fast but after logging in the start up programs took about 10 minutes and I was able to use my windows after total of 15 minutes I know this is a lot the reason as I think is the GRUB file is actually slowing my windows because it doesn't want to harm my hard drive this is just a guess.
[The prize of the worst OS ever goes to Windows Vista!]
View 4 Replies
View Related
Nov 3, 2010
I have a Samsung N130 with XP and Ubuntu 10.04. One day I entered the Vista Loader in the GRUB 1.98 and it took me into the Samsung Recovery Partition! Now my BIOS reboots in a loop and no GRUB is shown anywhere! F9 does work (Long Beep is heard) and F2 (Recovery). I tried the UBUNTU install CD and I get a STd error and my drive slows down.
View 7 Replies
View Related
Sep 16, 2010
I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
[code]...
View 8 Replies
View Related
Mar 30, 2011
I experienced what i perceive as the craziest thing during 2 years of using ubuntu. About some months ago, I have two ubuntu installed on my HP-mini netbook: ubuntu 10.04 64 bit (CAElinux) and kubuntu 10.04, and run without problem.
One day, the netbook's battery run out of charge and I forgot to plug it in. The ubuntu, as usual, went to hibernate, but without harddisk noise, so I forced it to shutdown by pressing power button (as i think it is not normal). What happened later was the partition of 10.04 was broken, it could not boot, it even affected another partition as the netbook couldn't boot kubuntu 10.04.
I try to run liveUSB and CD of both distro and the liveCD/USB boot stopped on loading screen. So I try another linux distro: PCLinuxOS, which was able to boot but took very long time. The partition of ubuntu 10.04 could not be accessed.
After installing PClinuxOS in replace of kubuntu, I scanned the ubuntu 10.04 partition and the partition was fixed, I could access the partition and could load to ubuntu 10.04, but it took very long time. Here how it loaded: first: blank screen with blinking cursor, then ubuntu load screen, then back to blank screen with blinking cursor, then it showed numbers and sentences, like some scanning works. It took long time before login screen appeared (about 10-15 minute, while the prevously normal boot time in my netbook was less than 1 minute), but once its done, the ubuntu worked normally. This also the case in the PClinuxOS and the reason it load very slowly.
After this, I try to boot the liveUSB of various linux distro, and found some could boot while the others not:
Able to load with unusual slow boot time:
PClinuxOS (latest)
Ubuntu 8.04
Fedora (latest)
Linuxmint 8 (based on ubuntu 9)
Can't load
ubuntu 10.04 and 10.10
kubuntu 10.04
latest linuxmint
The liveUSB boot could take 1 hour. I also try the latest Puppy, Gentoo and OpenSuse liveUSB but it couldn't boot, and it likely the liveUSB problem. I made the all the liveUSB with unetbootin. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint could not boot even after I scanned the ubuntu 10.04 partition. There was no problem with the liveUSB as it would load normally on another computer. I think it is just the variant of ubuntu 10 that is not being able to boot.
I was not content on this slow boot, so I try to format the two partition of ubuntu and PClinuxOS (there are another partitions though), and installed ubuntu 8. But it also happened to boot slowly as the previous ubuntu. Then I replaced it with linuxmint 8, and the same occurred. So I try to install windows on another partition, and it boot normally.
The question is, what is happening. Why do the forced-shutdown-of-ubuntu-10.04 affect another partition, to the boot of another distro? If my HD was broken, the Windows would load very slowly too right? Yes, in SMART Data (from disk utility) it showed "few bad sector", but i think this is not related to the slow boot. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint cannot boot until this moment. I am thinking there are some informations planted on my computer, that twist it to load some distro slowly, and prevent it to load some others. But where and what? (I almost arrived to the thought that this is supernatural!)
Because of my long story up there (as I think it must be reported), the conclusion is:
1. Ubuntu 10.04 on my netbook was forced shutdown (by me)
2. It caused the partition broken
3. After fixing the partition (by scan, but I forgot the command), it took very long time to boot, but the ubuntu itself run normally
4. It also affected the boot of another distro (slow down the boot time), but Ms.Windows boot time is normal
5. It also caused ubuntu 10 (and its variant) to not be able to boot from liveCD/USB
6. It also caused me going crazy
Now im gonna format the whole HD in hope of ubuntu 10.04 (and later) could boot again, but shall it fix the problem? (as formatting the previously ubuntu 10.04 partition did not solve the problem). Or should I buy another HD (or even computer) to install natty!
View 9 Replies
View Related
Aug 11, 2011
I installed fedora15 on my laptop. and after an upgrade, with the kernel 2.6.40-4.fc15.x86_64, my fedora boot is taking almost 10 minuts.....Its take so manytimes to boot. does someone knows why?I installed jdk, eclipse, glassfish, firebird and postgres for my workspace.....
---------- Post added at 11:16 AM ---------- Previous post was at 10:55 AM ----------
ok I I figured out why the long time to boot.I have here installed glassfish and I add a Line on /etc/hosts like that:
Code:
[vinny@vinny-fedora ~]$ cat /etc/hosts
127.0.0.1localhost.localdomain localhost
#127.0.0.2 vinny-fedora
::1localhost6.localdomain6 localhost6
127.0.0.1 vinny-fedora
If I comment the last line, the starting is normal. But without this line I cant start up Glassfish. is there another way to sat my hostname?
View 9 Replies
View Related
Feb 16, 2011
I made a clean install of Ubunto 10.10 on my Compaq Presarion F700, nVida graphics, AMD Turion 64x2.Installation was fine.When I boot, it takes a lot of time, 5 minutes or more.Also, after the system loads I get those applet errors I've attached. Sometimes I get all the applet errors and sometimes it get few of them.I tried several configs of "GRUB_CMDLINE_LINUX_DEFAULT" but still no luck.
View 2 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
Mar 21, 2011
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Mar 10, 2010
I recently installed Netbook Remix(Karmic, I think) on my Samsung N130 netbook as a dual boot with Windows 7. It had been working fine, I'd had no problems switching OS and I had restarted my computer many times without issue.
Today, I was on Windows 7, set it to hibernate when I left the house as I sometimes do, and when I came back and turned my computer on, first it asked which system I wanted to load which it never does after hibernation. I selected Windows, and it took me to the Samsung Recovery Solution screen for some reason, and I closed that. It restarted the computer, and when it turned back on it said GRUB loading, and rebooted again, and keeps looping that whenever I turn it on.
I tried removing Ubuntu using GParted from a flash drive, but I'm still stuck in the loop, and it's gotten rather frustrating.
View 1 Replies
View Related
Nov 18, 2010
I've put a script in the "startup application preference". He load fine when i close and open my session, but he didn't load if i reboot or wake up before opening my session.That's the command i've write in the "startup application preference" : sh /home/myname/intuos.sh(The only thing my script do for now are reversing the button on the mouse of my Intuos4)I don't think my script are badly write, since he work manually.
View 6 Replies
View Related
Jul 22, 2011
i got 2 live cds with 5 distros on each. i decided to test the distros on my macbook but I couldn't boot from the Live CD using reboot and holding down "c", so I selected the Live CD as my startup disk. so i experimented with fedora, tested mint, and played with pradus.
View 1 Replies
View Related
May 3, 2010
After keying in my passwort at the login, it takes exactly 26sec until the Desktop is ready. I have checked bootchart and it seems that the udisk-daemon is blocking the boot process for some reason. I have tried different disks, different memory, without dvd...always the same problem.
Last thing I did, was to put in the disk into another pc, different mainboard different proc and voila, it boots very quickly.
I suspect this to be due to my mainboard or proc.
Mainboard ASUS M4A78-E
AMD Athlon 7750 Dual-Core Processor
2x2GB DDR
Radeon HD 3300 Graphics
WDC WD5001AALS-0 500GB (System)
Seagate ST31000333AS 1TB(Backup)
View 9 Replies
View Related
Jul 20, 2010
I have a Dell Workstation T3400, dual core 2.6Ghz CPU. Recently I upgraded UBUNTU from 9.10 to 10.04. After the upgrade, it takes long time to boot up. First shows a blinking hyphen, then a screens with options to enter configuration utility appears. Then says GRUB loading but again blinking hyphen stays for almost a minute. Finally, I get the log in screen after about 2 minutes.... I checked some other related posts but could not find any solution that worked for me.
View 2 Replies
View Related
Oct 22, 2010
I've been noticing that my ubuntu 10.04 takes too long to boot lately, and now that I've upgraded to 10.10 and had the same issue, I took few minutes to investigate. from what I understand from the log files, it looks like my hard drive takes too long to mount, actually 40+ seconds to mount...
below is the section I mentioned above from my messages log:
Code:
Oct 22 08:43:22 ubuntu kernel: [ 2.076608] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Oct 22 08:43:22 ubuntu kernel: [ 49.537272] Adding 2096444k swap on /dev/sda8. Priority:-1 extents:1 across:2096444k
View 9 Replies
View Related
