OpenSUSE :: Access Web Server On VirtualBox Guest From Host OS

Sep 4, 2010

I used to be able to access the web server I had running on my guest OS in Virtual Box from my host OS. I also had it set to the network settings of "Host Only Adapter". Then I needed to access the internet directly on the gues OS, so I changed my settings on the guest OS to "NAT" (in virtual box), and in /etc/network/interfaces, I removed the loopback stuff and the static IP I'd put in. Now no matter what I do, I cannot get it back to being accessible from the host os! I even did a completely NEW install of Ubuntu guest OS in Virtual box Guest OS: Ubuntu 10.04 Desktop Host OS: OpenSUSE 11.3 VirtualBox: 3.2.6

View 5 Replies


ADVERTISEMENT

OpenSUSE :: Virtualbox Where Host Can See Webserver From Guest And Reach Internet?

Sep 21, 2010

I have set up my guest OS in VirtualBox so that it has a static ip and is using a bridged adapter. As a result, I can see the webserver that's hosted in guest from my host OS's web browser. However, for some reason my current setup does not allow my guest to reach the internet. What settings do I need to enable both?

View 1 Replies View Related

Debian :: Virtualbox - Guest Has The Same IP As Host

Oct 6, 2015

im new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.

this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host

View 1 Replies View Related

Fedora :: VirtualBox Ping From Guest To Host?

Dec 9, 2009

I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.

Quote:

Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:

Quote:

Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]

[code]....

dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.

View 8 Replies View Related

Fedora Installation :: F12 As A Guest On XP Pro Host Using VirtualBox?

Jan 3, 2010

I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:

Booting from local disk...
FATAL: INT18: BOOT FAILURE

There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?

View 5 Replies View Related

Ubuntu :: Virtualbox Host To Guest Connection?

Sep 9, 2010

Quote:

I'm working in php / mssql project and I'm working on php side. I try VirtualBox to access to mssql from linux. I'm using VirtualBox 3.2.8(Downloaded from VirtualBox website) Hosted On Ubuntu 10.04, and my Guest OS is Windows 7. I followed some tutorials on how to connect from host to guest, but all failed... how to connect from ubuntu (host) to windows 7 (guest)

View 2 Replies View Related

Slackware :: 13 Guest Additions For Virtualbox On Xp Host?

Jan 26, 2010

pretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?

View 1 Replies View Related

Networking :: QEMU: Tap Host: Windows 2003 Server - Guest: Ubuntu 9.04 - No Ip Address And Can't Access Public

Oct 28, 2010

host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0

from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:

NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0

Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.

View 1 Replies View Related

General :: Accessing A Guest OS's Directory From The Host OS In VirtualBox?

Jun 5, 2010

With VirtualBox you can share a directory on the host machine with the guest machine. Can you share a directory on the guest machine with the host machine? In my setup the host is Windows 7 and the guest is Ubuntu. Can I have a directory on the Ubuntu file system accesible from Windows?

View 1 Replies View Related

Ubuntu Networking :: Unable To Reach Guest OS In VirtualBox From OSX Host

May 18, 2011

Recently I've been unable to load web pages, hosted on my Ubuntu Guest in Apache, from my OSX Host. In fact, I can no longer even ping the Guest OS from the Host. In the past, when I did ifconfig on the Guest, I got an IP of 10.0.1.n. Now I'm getting 10.0.2.15--the default NAT Address. The thing is, I didn't change any settings recently. What I did do is run software update for OSX, Ubuntu, and updated VirtBox.

Current Versions:

VirtBox 4.0.8 r71778
Host: OSX 10.6.7
Guest: Ubuntu 11.04

why I can no longer access my Guest OS from my Host? I spent hours on this last night, to no avail. What would cause the Guest IP to change from 10.0.1.n to 10.0.2.15? As I say, I manually made no config changes.

View 1 Replies View Related

Slackware :: VirtualBox Guest On Win7 Host - Folder Sharing?

Jul 13, 2010

I have a Win7 laptop with the latest version of VirtualBox installed. It's a dual core proc with ram to spare. So, I installed Slack64-13.1 and it rocks! I'm really impressed that Slack is running at what appears to be native speed, but in virtual machine. Hardware response is normal, WIFI and LAN are both working great for my normal tasks.So, I downloaded a few much needed patches, and new ISO image for one of my old desktop PCs. Now, my problem is I can't connect my USB cdwriter to my virtual slackware or share folders in the Win7 install with the virtual slackware. I read a few of tutorials on the Oracle VBox website, and several of the ones here on LQ, and none of them seem to solve my problems.

View 3 Replies View Related

Debian Configuration :: VirtualBox: Host-only Networking: Static IP Guest Addresses?

Jun 6, 2011

Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).

Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.

[code]....

View 2 Replies View Related

General :: Using Samba To Share A Folder From A Guest With A Windows Host In VirtualBox

Mar 15, 2011

I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.

So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?

View 1 Replies View Related

Ubuntu Installation :: 10.04 Guest In VirtualBox On Win7 Broken Host-only Adapter?

Jun 5, 2011

Setup:

1. Microsoft Windows 7 64-bit Professional HOST Operating System
2. Oracle VirtualBox 4.0.6r71416 on top of Windows 7
3. Ubuntu 10.04 Lucid Lynx 32-bit GUEST Operating System in VirtualBox

I successfully installed the above configuration on May 15, 2011. I had some difficulty getting the Host-Only VirtualBox Adapter to work. I was forced to make a subtle change to the Windows Registry in order to get the Adapter to work correctly. I was successful. I used the Debian Update Manager to update my installation of Ubuntu. Nothing changed on the Windows 7 side. Now, Windows 7 says that the Host-only adapter is enabled, but I don't have a connection to the Ubuntu OS. I can't use PuTTY or WinSCP. When I invoke ipconfig on the Windows side, 192.168.56.101 is the IPv4 address. When I invoke ifconfig on the Ubuntu side, there isn't anything.

View 7 Replies View Related

OpenSUSE :: Virtualbox Guest Additions: Set A Shared Folder In 11.2 Guest

Mar 4, 2010

OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.

1 - Set up a Virtual Machine and install OpenSUSE 11.2

2 - Create a shared folder on host (HostFolder)

3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...

4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel

5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.

6 - Open a root terminal and run

cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare

* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *

7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.

8 - Create shared folder in OpenSUSE (GuestFolder)

9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.

10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0

11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

View 1 Replies View Related

Debian :: VirtualBox Guest-only Internet Access

Aug 12, 2014

Is it at all possible to disable internet access for the Debian host while providing internet access to the VirtualBox guest(s)?

I plan to only hook up the host to the internet for updates, upgrades and installations, although if I can, then I will make a Debian guest to test everything out and download the files from there and install everything on the host without even a single host connection point.

Is this the indomitable approach to intercommunication security? If not, then what haven't I thought of yet?

View 10 Replies View Related

General :: VirtualBox - Internet Access Via Guest OS (Windows)

May 20, 2011

I have an USB internet key (multimode GPRS/EDGE/UMTS/HSDPA) that only works on Windows. Though, I mainly use Linux for development activities and I don't want to move them to Windows. For this reason I decided to use a Windows guest on VirtualBox for internet access and the Linux host for the other stuffs, but I'd greatly prefer to use Linux for everything (internet too) and Windows only as internet gateway.

View 1 Replies View Related

Ubuntu Networking :: 9.10 - How To Access Network Drives On VirtualBox Guest OS

Feb 13, 2010

I currently have VirtualBox installed on my Ubuntu 9.10 Desktop. I have windows xp as a guest os and it has network shares on it. My question is, is there a way for another computer to access those network drives on the guest os in virtualbox? I don't want to search for hours on end on google, a simple no would be fine - however if it is possible let me know because when I am in windows on another computer that has windows as a host os it sees it in the windows network folder but it says "....network location not found" or something similar but it still shows a pc picture of the virtual os of the virtual box program running in ubuntu.

View 1 Replies View Related

Ubuntu Servers :: X Forwarding - Access Via Ssh A Virtualbox Guest Machine?

Mar 29, 2010

host - ubuntu 9.10 desktop
virtualizer - VirtualBox

What will be the easiest way to ssh connect a VM on VirtualBox, exporting its desktop to host, while it is already running ? I found; Howto Access via ssh a Virtualbox Guest machine.

[Code]...

View 4 Replies View Related

Servers :: Access MySQL In Ubuntu Guest From WinXP Host?

Jul 3, 2010

I have Virtualbox setup

WinXP Host
Ubuntu 10.04 is the guest
Mysql is installed in ubuntu and it works fine in the guest (ubuntu)
Internet works fine in the host and the guest. Bridged Network.

Now, here is the thing... i want to access mysql from my host to load some data into it.

how do i access mysql from my host Win XP?

View 3 Replies View Related

Fedora :: Access Shared Folders In Virtual Box (Host OS Is Windows7 And Guest OS)

Apr 15, 2011

I am trying to access shared folders in Virtual Box with Host OS being Windows7 and Guest OS is Fedora. Did anyone face a similar problem? I have been going through many solutions but none of them worked out. I am able to keep the required folders in Shared Folders making them Auto-Mount and Permanent. I tried to install Guest Additions from Devices, but I am not sure how to install the Guest-Additions software in Fedora. how to proceed so that I can access files in my shared folder.

View 1 Replies View Related

Ubuntu :: VirtualBox Guest Faster Than Ubuntu Host?

Dec 19, 2010

I've recently installed Ubuntu 10.10 64 bit (say host H). I also installed Ubuntu inside VirtualBox on H using the same image (say Guest G). I'm working on a fairly large java project. I've installed the same version of jdk (sun-java-6) on both H & G. To compile my project - it takes ~3 mins 10 secs (consistently) on H, whereas it only takes ~1 min 5 seconds on G . The full build (compile + tests) takes ~29 mins on H, whereas it takes only ~7 mins on G. Tests do a lot of writes to mongodb. This is very puzzling. I think it has something to do with fsync disk io etc. But I'm not proficient enough to dig further. Maybe it has something to do with partition sizes of H, G?

View 4 Replies View Related

General :: Install VirtualBox Guest Additions On Fedora 14 Guest?

Apr 3, 2011

I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?

View 2 Replies View Related

Ubuntu :: Server Edition Guest Additions In Virtualbox

Jan 11, 2011

I am trying to set up Ubuntu server edition 10.10 in virtualbox (windows host). All is going well, except that I can't figure out how to install the guest additions. I know how to do it in the normal edition of Ubuntu, but when I navigate to media/cdrom, it's empty.

View 2 Replies View Related

OpenSUSE :: Installing VirtualBox Guest Additions In 11.3 VM

Feb 28, 2011

I'm trying to install the Virtual Box Guest Addition for my openSUSE 11.3 VM, but I'm having some problems. The Virtual Box manual says I need to install the kernel-default-devel package, so I did that, but it also says :

Make sure that your running kernel (uname -a) and the kernel packages you have installed (rpm -qa kernel*) have the exact same version number. Proceed with the installation as described above.So I ran both commands and here is the output :

edgar@linux-t7uc:/> uname -a
Linux linux-t7uc 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 athlon i386 GNU/Linux
edgar@linux-t7uc:/> rpm -qa kernel*

[code]...

the devel packages are version 2.6.34.7-0.7.1 and the kernel is version 2.6.34-12. How do I install the correct version of the kernel-default-devel and kernel-devel package with zypper? I thought maybe the versions could be compatible somehow, so I tried to install the Guest Addition and here's the result :

edgar@linux-t7uc:/media/VBOXADDITIONS_4.0.4_70112> sudo sh ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........

[code]....

View 3 Replies View Related

Fedora :: Installing Guest Additions Virtualbox 13 Guest?

Jun 3, 2010

I had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).

View 5 Replies View Related

OpenSUSE :: Share Folder To VirtualBox Guest WinXP?

Feb 5, 2010

I've tried using the "devices->Shared Folders" to create a shared folder but it didn't work. I still couldn't see it from the guest OS (winXP). I also, tried sharing a folder in winXP and then tried adding a network folder in dolphin - also didn't work.

View 4 Replies View Related

OpenSUSE :: Run LAMP In A Virtual Machine And Access The Web Server Via A Browser On The Host?

Aug 31, 2010

How can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?

View 3 Replies View Related

Ubuntu Servers :: Cannot Ping Host From Guest Using Vmware Server 2 / Fix It?

Apr 25, 2010

Not sure if this post belongs here, but here it is.

Host: Win server 2003
Guest: Ubuntu server

Host: IS able to ping guest. Firewall is OFF. NOT able to access guest (which is a web-server) at browser.
Guest: NOT able to ping host. Running a web server, you can check the website: (pegajosa.com) is running under that virtual Linux server.

Problem: guest needs to access host's sql database and/or any resources.

Network: is bridged.

At the Linux box ifconfig -a code...

View 7 Replies View Related

Ubuntu Networking :: Server + KVM. Guest Os Can Reach Wan But Host Machine Cannot?

Oct 13, 2010

I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved