Ubuntu :: VGA Card Has Stopped Start-up?
Feb 24, 2011
My vga card died, so I replaced it with an ASUS EAH5670 1GB card. The computer starts up normally in Windows xp, but when I want to boot up in ubuntu, I choose ubuntu, then I get a series of upgrades or recovery modes, I always just choose the top one, then the ubuntu screen flashes up for about 1 second, then I get a black screen for a few seconds, then a message telling me the monitor is going to sleep!
What do I do to get back into ubuntu?
View 3 Replies
ADVERTISEMENT
Jan 23, 2011
I recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
View 1 Replies
View Related
May 18, 2010
After upgrading to the latest Ubuntu, my wireless card stopped working. I keep on pressing the button but the little orange light wont come on...I have an aspire 5517 with "Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)" I have tried drpjkurian's tutorial for madwifi with no success . (http://ubuntuforums.org/showthread.php?t=1309072
View 2 Replies
View Related
Nov 10, 2010
I have two sound (or audio) hardware on my desktop computer. One is part of my computer motherboard and the other one is a sound card (CA0106 Soundblaster) I bought to replace the other one. When I first installed Ubuntu, my sound card was working properly after I made the necessary changes (system>preferences>sound), but after a few days it just stopped working and the sound from the motherboard is only working.
I reinstalled Ubuntu to my computer a few days ago, and my sound card was working again, but once again, it stopped working after a few days. How can I fix this?
View 2 Replies
View Related
May 8, 2011
desktop has been running Ubuntu 10.10 just fine since December. Today, the connections menu shows nothing but "Wireless Networks: disconnected." My laptop is inches away and has a full connection.I'm not sure what diagnostic tools I have at my disposal. The one thing I've been able to do is lspci. The relevant output of sudo lspci -v | less is:
03:05.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: RaLink EW-7108PCg
Flags: bus master, slow devsel, latency 64, IRQ 20
[code]...
View 3 Replies
View Related
Jun 11, 2010
I have an HP 2133 Mini-Note [KX869AT] with a Broadcom 4312 wireless card. I've had Ubuntu 10.04 on my machine for a few weeks now and everything was great until my wireless card abruptly stopped working. It doesn't detect any wireless networks,uch less connect to them. I tried reinstalling the proprietary driver, but that hasn't worked.
View 1 Replies
View Related
Apr 3, 2011
I'm using 10.04 and it's been excellent all the way through up until this problem happened. My laptop's built-in SD card reader has stopped working out of nowhere.
Here are the basic facts:Laptop is a Compaq Presario CQ50-115NR I tried older Linux Kernels, it's not the newest kernel causing the problem. The SD card reader is not shown in disk utility anymore. It used to be shown, even when no SD card was inserted. Now? Nothing.lspci output:
Code:
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
[Code]...
View 1 Replies
View Related
May 11, 2011
Well, I have an issue with my wireless card in Ubuntu 10.04, my wireless card model is:
the D-Link WIRELESS N 150 DESKTOP ADAPTER DWA-525. I was already successful getting it to work by using the RaLink driver suggested here and following the instructions in their readme.But after a system update I performed through Update Manager (in which I guess the kernel was updated), the device stopped working completely. The wireless icon remains(in the top panel), but it displays a red exclamation mark next to it
View 9 Replies
View Related
Apr 5, 2010
Karmic 9.10
Asus F6J laptop
Previously I have had no problems with sound. After the installation of gnome-network-admin package, my soundcard was no longer autodetected on startup. I have since removed the package but the problem remains. After boot-up in 'Sound Preferences' > 'Hardware' there is nothing shown. In > 'Output' it shows 'Dummy Output' . I can regain the sound by using
[Code]....
View 1 Replies
View Related
Dec 16, 2009
Our smart card readers stopped working with Firefox and Thunderbird after upgrading from Fedora 9 to 12. When I first opened it, Thunderbird warned that the "CAC Reader (DoD Configuration Extension)" is incompatible with the current version (3.0b4) and disabled the extention. Firefox (3.5.5) just doesn't work. The module listed in Mozilla Firefox/Thunderbird [Security Devices] was "/usr/lib64/pkcs11/libcoolkeypk11.so" which is still there. To get it working in Fedora 9 I was able to run an installer from [URL]. That was before my VeriSign software certificate expired.
Now I can't even connect to forge.mil because they require a PKI cert to connect. I'm wondering how they expect someone to get a driver for their CAC reader if they need a working CAC reader to get the driver - seems like a "Catch 22" situation. I also still have the rpm's that I downloaded before from software.forge.mil. I tried installing those but that didn't help.
mozilla-dod-configuration-1.0.2-0.noarch.rpm
firefox-mozilla-dod-configuration-1.0.2-0.noarch.rpm
thunderbird-mozilla-dod-configuration-1.0.2-0.noarch.rpm
Does anyone know if there is a later version of these RPM's or if there's another way to get our CAC readers working again with Firefox and Thunderbird?
Relevant Background Info:
Installed Packages:
ccid-1.3.9-2.fc12.x86_64
coolkey-1.1.0-11.fc12.x86_64
mozilla-dod-configuration-1.0.2-0.noarch
firefox-mozilla-dod-configuration-1.0.2-0.noarch
thunderbird-mozilla-dod-configuration-1.0.2-0.noarch
Could a renamed kernel module be part of the problem? What do you make of the following information?
Find library dependencies:
Code:
[root@inet3 ~]# ldd /usr/lib64/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
linux-vdso.so.1 => (0x00007fff41bff000)
libusb-0.1.so.4 => /usr/lib64/libusb-0.1.so.4 (0x00007f52a37fd000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f52a35e1000)
libc.so.6 => /lib64/libc.so.6 (0x00007f52a3268000)
/lib64/ld-linux-x86-64.so.2 (0x000000374b400000)
[root@inet3 ~]# locate linux-vdso.so
[root@inet3 ~]# locate vdso.so
/lib/modules/2.6.31.6-166.fc12.x86_64/vdso/vdso.so
[root@inet3 ~]#
##!!
There is no module named "linux-vdso.so". It looks like there was a name change that broke the libccid.so dependencies. I tried creating links within "/lib/modules/2.6.31.6-166.fc12.x86_64/" named linux-vdso.so pointing to vdso.so but it still isn't working. I've unloaded the module within Firefox (and Thunderbird) preferences within the [Security Devices] manager. Then tried adding it back using the [Load] button and specifying the coolkey library again but it's still not working.
View 12 Replies
View Related
Jul 14, 2011
the distro is slackware64-13.37 I did install the firmware it was working I have no Idea why it quit wicd sometimes looks like it's connected only to have mozila not find a network connection most of the time wicd times out when obtaining ip address the router is working just fine and was reset to out of the box factory defaults and is working with windoze vi-stool from dmesg I get
[code]....
View 1 Replies
View Related
Sep 9, 2010
I'm using Ubuntu 9.10 on a Lenovo ThinkPad T61 using an Intel PRO/Wireless 3945ABG. My laptop's ability to connect to a wireless network stopped last night, and I'm not sure why. It's definitely something on my end, as my roommate can connect to the internet on a Windows box. I can wire in without a problem, but that's a pain and my Ethernet cable got lost in the shuffle when I moved back to school. I've been able to get into this network before and nothing about it has changed. I've been able to hibernate and restart and such and nothing has ever needed to be reset.
The router's a D-Link WBR-2310. Wicd and Network Manager see the network (I'm back to using wicd) , but wicd appears to get stuck at "Obtaining IP address..." and says "Unable to connect: Cannot obtain IP address". I know my password is correct (I set up the router and I'm the CS undergrad in the apartment so I manage it), lspci sees the wireless card, ifconfig and iwconfig return information about the interface, dmesg|grep wlan0 doesn't seem to have anything terribly out of the ordinary, but here's that output:
Code:
allyanncah@taliesin:~% dmesg | grep wlan0
[ 23.514202] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.609016] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.756143] wlan0: direct probe to AP 00:24:01:cb:4e:7e (try 1)
[ 38.758791] wlan0: direct probe responded
[ 38.758796] wlan0: authenticate with AP 00:24:01:cb:4e:7e (try 1)
[ 38.760587] wlan0: authenticated
[ 38.760609] wlan0: associate with AP 00:24:01:cb:4e:7e (try 1)
[ 38.763318] wlan0: RX AssocResp from 00:24:01:cb:4e:7e (capab=0x431 status=0 aid=1)
[ 38.763322] wlan0: associated
[ 38.765502] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready .....
I've tried:
- reinstalling wicd
- uninstalling wicd and installing network-manager
- restarting
- shutting down and booting back up
- restarting the router
- sudo /etc/init.d/networking restart
- taking the interface down and back up with ifconfig
I haven't changed anything recently in regards to my wireless card, and all the fixes I've tried are things I've done before without an issue. The only thing I'm wondering about is if doing a hard reset might have broken something (I know this is a cardinal sin, but there's a whole 'nother problem I haven't been able to fix with the OS hanging every once in a while over a VPN daemon when it tries to shut down or restart -- I've left it for hours to see if it actually gets anywhere and no luck, won't do a soft reset). I'm nervous about reinstalling the driver just because I've never had to do it and drivers are a finicky business. I imagine there's a config error somewhere?
View 2 Replies
View Related
Feb 23, 2011
I have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
[Code]...
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
View 1 Replies
View Related
May 11, 2011
I was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
View 3 Replies
View Related
Mar 4, 2010
Suddenly today during the start up the pc stopped to respond while doing a file system check...
I switch it off, restarted and everything seemed to be fine, i got the desktop without troubles.
Then i tried to boot from the live Key and run a fsck but it didn't work, i got some error like:
superblock could not be read....and at the end it says to run e2fsck
I did it and i got the same error...
So i restarted ubuntu and i decided to try:
And i got a blue screen where i selected the first option (something alike restart in normal way)
At the next restart i finally got the checking and it was fine! why i can't run fsck or e2fsck from live key
View 1 Replies
View Related
Nov 15, 2010
I'm using Maverick and since yesterday, my wireless hasn't been working. It was working before with Maverick and I don't recall doing any updates that might have changed wireless configurations.
By "doesn't work" I mean it doesn't recognizes any networks, as if the wireless was turned off (there's this button on laptops, but it's turned on). I had that problem some time ago, but rebooting solved the problem, which, now, didn't.
My laptop is a HP dv6420la.
Where to start?
View 9 Replies
View Related
Nov 3, 2010
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies
View Related
Jan 9, 2010
I have a relatively new F12 install (one week old) on which I got my wireless Broadcom card working using kmod-wl-PAE. It was a very easy process - not really a process just yum install kmod-wl-PAE.
After a few updates, I notice that the wireless card stopped working. I assumed maybe there was an update that conflicted, so I did a reinstall of kmod-wl-PAE and it worked again immediately.
Then I started installing compiz-fusion. Immediately after, wireless is broken again. So I yum erase kmod-wl-PAE and then yum install kmod-wl-PAE and it works again.
Now, only slightly later that same day, wireless stops working more or less randomly and I cannot get the reinstall of kmod-wl-PAE to fix it. So I uninstall, disable compiz-fusion, shut down, and restart the computer to try again. My thought is that maybe along the way my autostart compiz or something about compiz is causing the wireless not to configure properly. When I restart, wireless is working. Without kmod-wl-PAE installed:
yum info kmod-wl-PaE
Loaded plugins: presto, refresh-packagekit
Available Packages
Name : kmod-wl-PAE
Arch : i686
[Code].....
One, how is this even possible, and two, what is going on with the wireless working, not working, working, not working?
View 14 Replies
View Related
Jun 20, 2009
HH 8.04 on a Toshiba Satellite A75-S2762. Rather suddenly, I have no sound. On startup, I click on the volume control (speaker-with-x) icon in the tray, and the error message in the attachment shows up. (That message only appears once per session, subsequent clicks just say "No volume control GStreamer plugins and/or devices found.") Synaptic shows a broad range of said plugins installed (everything from Pidgin to good/bad/ugly), I mark them all for reinstallation, but nothing. I have no sound from any program, and whenI go to Control Center | Sound, there are no options down in the "Device" pull-down.Recenthanges to system: installed and later uninstalled VLC for i386, however sound continued to work for at least one or two sessions. (However, after installing VLC, I got no sound in Totem or VLC, only in Dragon.) No other changes of note
View 1 Replies
View Related
Jan 30, 2010
After doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code:
2010/01/30 18:40:46 :: ifconfig wlan0 up
2010/01/30 18:40:46 :: iwlist wlan0 scan
2010/01/30 18:40:47 :: ifconfig eth0
2010/01/30 18:40:47 ::
2010/01/30 18:40:47 :: {}
2010/01/30 18:40:47 :: hidden
2010/01/30 18:40:48 :: scanning done
2010/01/30 18:40:48 :: found 4 networks:
2010/01/30 18:40:48 :: found use_settings_globally in configuration 1
2010/01/30 18:40:48 :: found afterscript in configuration None .....
View 3 Replies
View Related
Feb 19, 2011
I have somehow messed up my network (onboard) card in the process of configuring network settings. how I managed to do so is that I did not use ifdown before making changes to my "/etc/network/interfaces" file. Also I think it might be relevant to mention that the sshd was running -although with no active connections at that time- since I have the service installed on my 10.04 Ubuntu Server (x64). So step by step what I did to end up with no network connection:
1) sudo cp /etc/network/interfaces ~/myfiles/interfaces.original
2) chmod 444 interfaces.original
3) sudo nano /etc/network/interfaces and then applied my network settings (IP, netmask, etc.). The syntax and configuration of my "interfaces" file is without flaw since it was simple, typical and was assigning my up to then DHCP assigned IP of 192.168.2.3 to static.
At about that point and although "ifconfig" showed the changes had been applied as planned the network card stopped working. I could no longer ping anyone but myself and the leds both on my network adapter and on my switch were turned off. Since my configuration also has a Windows 7 installation I rebooted to Windows in hope of troubleshooting through device manager but I got an error code 10 which means that the adapter could not start. Did I fry my network adapter for good and for all or I still have a chance of repairing it?
PS: After a closer look I saw that the NIC's LEDs indicate that the device cannot start. I am considering to reboot my MB as a last resort since the NIC is an onboard device and changing BIOS settings has done nothing to restore it.
View 1 Replies
View Related
Feb 13, 2010
fsck died with exit statusAn automatic file system check of the root file system failed. A manual fsck must be performed then the system restarted. The fsck should be performed in maintenance mode with the root file system mounted in read only mode..This is the message I now get with the word "warning" in red
View 2 Replies
View Related
Mar 6, 2010
I just installed Slackware 13 with xfce and everything went well (eventually). At first, my wireless didn't work, but then I found /etc/rc.d/rc.wireless.conf. Everything was working, and I was happily surfing and downloading packages.But then one day... It just stopped! I tried to ping google, and it could send packets but not receive them.I'm connecting through an unlocked network in my building, so I guess it's DHCP (thats what i set it up with the first time 'round
View 1 Replies
View Related
Jun 14, 2011
I installed apache 2.2 with centos 5.5. When I typed service httpd stop, apache stopped. Then in a minute, it automatic start again. I don't use crontab, and I tried 'chkconfig httpd off', but it still automatic start. I used 'ps -ef' to look process, I saw, httpd have PPID is 1, and then I find PID 1 have PPID 0.
View 1 Replies
View Related
Apr 24, 2011
Program Knoppix 3.1 cdr
Computer Dell 2600.
Floppy start up yields a stopped functioning computer with the following line:
"Probing SCSI... aic7xxx0"
At this point the computer is locked up and I have to turn it off. A restart causes the same action.
View 2 Replies
View Related
Feb 5, 2011
I have a media centre running mythbuntu 10.10, with an Athlon X2 2400 in it. I've just replaced my aging nVidia GeForce 6200 with an nVidia gt430. After restarting the box with the new card in it, and an old VGA monitor plugged in X won't start properly. It fails with "Screens found but no valid configuration" or similar. I removed the old xorg.conf and tried restarting, and it will actually go into X, but when I try to run nvidia-settings, it tells me I'm not using the nVidia driver.
I then tried deactivating the nvidia driver and reactivating it, then using sudo nvidia-xconfig, but when rebooting I get the same error as above. dpkg-reconfigure xserver-xorg seems to no longer do anything i.e. if I delete xorg.conf and run this, no new xorg.conf is generated. I'm at a bit of a loss as to how to get the new video card working properly. I'm going to put the box back together and plug it back into the flat screen tv and see if it all works. no xorg.conf allows me into X, but without being able to configure with nvidia-settings. running nvidia-xconfig gives me an xorg.conf, but won't allow X to start...
View 3 Replies
View Related
Jan 28, 2011
I have fujitsu siemens amilo L1310G.i can`t start wireless card.In helpdesk they told me they only support win xp.Can anybody help me ? Tried acerhk but nothing worked
View 6 Replies
View Related
Aug 12, 2010
Not sure what this means, just installed CentOS 5.5 i386 on an older Pentium 4 desktop with an ATi Radeon 9200..
What information do I need to supply to get this issue sorted out?
View 2 Replies
View Related
Nov 25, 2010
ubuntu 10.10 64 bit i try to change graphic card it have some problem bit about colour an old i use ship of nvidia gforce 200 series but when i change to nvidia gforce 7900 i login it's show in black screen mode . ubuntu 10.10 name-desktop tty1 name-desktop login: _
View 1 Replies
View Related
Aug 24, 2010
Ive just built a PC running Suse 11.2. Ive finally got the wireless PCI card running using Ifdown then Ifup from a console, ( using ndiswrapper) I need this to happen while booting up so the wireless is automatically started so I can do away with this routine everytime. The PC is for a friend who is not too savvy on PC's. what script I'd need to run to get this to work? I know that if there was ever any change to kernel it would have to be reset.
View 1 Replies
View Related
