fsck died with exit statusAn automatic file system check of the root file system failed. A manual fsck must be performed then the system restarted. The fsck should be performed in maintenance mode with the root file system mounted in read only mode..This is the message I now get with the word "warning" in red
View 2 RepliesI've used Katapult to launch applications on both my laptop and desktop boxes for a long time, but yesterday it stopped working on my laptop. It will bring up folders, but not apps. I checked the settings and compared the katpultrc file with the one on my desktop (they are the same) and also compared katapult.la and katapult.so from /usr/share/kde3 and they are the same also. I'm not having any other problems, and it doesn't appear to be a problem with katapult itself, and I'm getting no warnings of any kind. Also I have done the same package updates on both machines.
View 1 Replies View RelatedI'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
View 6 Replies View RelatedI just installed FC13 on my HP laptop and everything has been working great with one exception. When I plug in my headphones, it doesn't mute the speakers and there is no sound in the headphones. I've checked alsamixer and the gnome-volume-control and all necessary channels are unmuted and turned up. But I have no idea how to proceed. I'm afraid to make any configuration changes because I don't want to lose the sound completely. Here is the output from lspci
Code:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
I have a keypad with a numeric part to it (as well as the traditional numbers above the alpha keys)It stopped working after I installed Moonlight - and although I have uninstalled Moonlight it is still not working (I may be wrong that Moonlight was the problem, but I can't think of anything else)The number lock indicator still lights up, but there is no response to any numeric input. With the number lock key off, the alternative actions (cursor up, down, etc) work normally.
View 7 Replies View RelatedOur smart card readers stopped working with Firefox and Thunderbird after upgrading from Fedora 9 to 12. When I first opened it, Thunderbird warned that the "CAC Reader (DoD Configuration Extension)" is incompatible with the current version (3.0b4) and disabled the extention. Firefox (3.5.5) just doesn't work. The module listed in Mozilla Firefox/Thunderbird [Security Devices] was "/usr/lib64/pkcs11/libcoolkeypk11.so" which is still there. To get it working in Fedora 9 I was able to run an installer from [URL]. That was before my VeriSign software certificate expired.
Now I can't even connect to forge.mil because they require a PKI cert to connect. I'm wondering how they expect someone to get a driver for their CAC reader if they need a working CAC reader to get the driver - seems like a "Catch 22" situation. I also still have the rpm's that I downloaded before from software.forge.mil. I tried installing those but that didn't help.
mozilla-dod-configuration-1.0.2-0.noarch.rpm
firefox-mozilla-dod-configuration-1.0.2-0.noarch.rpm
thunderbird-mozilla-dod-configuration-1.0.2-0.noarch.rpm
Does anyone know if there is a later version of these RPM's or if there's another way to get our CAC readers working again with Firefox and Thunderbird?
Relevant Background Info:
Installed Packages:
ccid-1.3.9-2.fc12.x86_64
coolkey-1.1.0-11.fc12.x86_64
mozilla-dod-configuration-1.0.2-0.noarch
firefox-mozilla-dod-configuration-1.0.2-0.noarch
thunderbird-mozilla-dod-configuration-1.0.2-0.noarch
Could a renamed kernel module be part of the problem? What do you make of the following information?
Find library dependencies:
Code:
[root@inet3 ~]# ldd /usr/lib64/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
linux-vdso.so.1 => (0x00007fff41bff000)
libusb-0.1.so.4 => /usr/lib64/libusb-0.1.so.4 (0x00007f52a37fd000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f52a35e1000)
libc.so.6 => /lib64/libc.so.6 (0x00007f52a3268000)
/lib64/ld-linux-x86-64.so.2 (0x000000374b400000)
[root@inet3 ~]# locate linux-vdso.so
[root@inet3 ~]# locate vdso.so
/lib/modules/2.6.31.6-166.fc12.x86_64/vdso/vdso.so
[root@inet3 ~]#
##!!
There is no module named "linux-vdso.so". It looks like there was a name change that broke the libccid.so dependencies. I tried creating links within "/lib/modules/2.6.31.6-166.fc12.x86_64/" named linux-vdso.so pointing to vdso.so but it still isn't working. I've unloaded the module within Firefox (and Thunderbird) preferences within the [Security Devices] manager. Then tried adding it back using the [Load] button and specifying the coolkey library again but it's still not working.
the distro is slackware64-13.37 I did install the firmware it was working I have no Idea why it quit wicd sometimes looks like it's connected only to have mozila not find a network connection most of the time wicd times out when obtaining ip address the router is working just fine and was reset to out of the box factory defaults and is working with windoze vi-stool from dmesg I get
[code]....
My laptop's (Acer Travelmate P243-M-6456) headphone jack had been working fine, and has no issues when booted into Windows, but it suddenly stopped working.
I've gone through alsamixer, and the volume is up, and nothing seems to be muted, and I've tried to do everything I could throughout the sound options in the Gnome System Settings.
Here is my ALSA information script output : [URL] .....
I've been running Ubuntu 10.04 on my Dell Studio laptop for a few months now with no audio problems. Last night I was listening to music just fine, then put my laptop to sleep and went to bed. Today, I go to play music, and nothing comes out of the speakers. Both headphone/speaker jacks work, but when I unplug the headphones, nothing happens.
View 2 Replies View RelatedAnybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies View RelatedI have a relatively new F12 install (one week old) on which I got my wireless Broadcom card working using kmod-wl-PAE. It was a very easy process - not really a process just yum install kmod-wl-PAE.
After a few updates, I notice that the wireless card stopped working. I assumed maybe there was an update that conflicted, so I did a reinstall of kmod-wl-PAE and it worked again immediately.
Then I started installing compiz-fusion. Immediately after, wireless is broken again. So I yum erase kmod-wl-PAE and then yum install kmod-wl-PAE and it works again.
Now, only slightly later that same day, wireless stops working more or less randomly and I cannot get the reinstall of kmod-wl-PAE to fix it. So I uninstall, disable compiz-fusion, shut down, and restart the computer to try again. My thought is that maybe along the way my autostart compiz or something about compiz is causing the wireless not to configure properly. When I restart, wireless is working. Without kmod-wl-PAE installed:
yum info kmod-wl-PaE
Loaded plugins: presto, refresh-packagekit
Available Packages
Name : kmod-wl-PAE
Arch : i686
[Code].....
One, how is this even possible, and two, what is going on with the wireless working, not working, working, not working?
After upgrading to the latest Ubuntu, my wireless card stopped working. I keep on pressing the button but the little orange light wont come on...I have an aspire 5517 with "Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)" I have tried drpjkurian's tutorial for madwifi with no success . (http://ubuntuforums.org/showthread.php?t=1309072
View 2 Replies View RelatedI have two sound (or audio) hardware on my desktop computer. One is part of my computer motherboard and the other one is a sound card (CA0106 Soundblaster) I bought to replace the other one. When I first installed Ubuntu, my sound card was working properly after I made the necessary changes (system>preferences>sound), but after a few days it just stopped working and the sound from the motherboard is only working.
I reinstalled Ubuntu to my computer a few days ago, and my sound card was working again, but once again, it stopped working after a few days. How can I fix this?
HH 8.04 on a Toshiba Satellite A75-S2762. Rather suddenly, I have no sound. On startup, I click on the volume control (speaker-with-x) icon in the tray, and the error message in the attachment shows up. (That message only appears once per session, subsequent clicks just say "No volume control GStreamer plugins and/or devices found.") Synaptic shows a broad range of said plugins installed (everything from Pidgin to good/bad/ugly), I mark them all for reinstallation, but nothing. I have no sound from any program, and whenI go to Control Center | Sound, there are no options down in the "Device" pull-down.Recenthanges to system: installed and later uninstalled VLC for i386, however sound continued to work for at least one or two sessions. (However, after installing VLC, I got no sound in Totem or VLC, only in Dragon.) No other changes of note
View 1 Replies View RelatedAfter doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code:
2010/01/30 18:40:46 :: ifconfig wlan0 up
2010/01/30 18:40:46 :: iwlist wlan0 scan
2010/01/30 18:40:47 :: ifconfig eth0
2010/01/30 18:40:47 ::
2010/01/30 18:40:47 :: {}
2010/01/30 18:40:47 :: hidden
2010/01/30 18:40:48 :: scanning done
2010/01/30 18:40:48 :: found 4 networks:
2010/01/30 18:40:48 :: found use_settings_globally in configuration 1
2010/01/30 18:40:48 :: found afterscript in configuration None .....
I have an HP 2133 Mini-Note [KX869AT] with a Broadcom 4312 wireless card. I've had Ubuntu 10.04 on my machine for a few weeks now and everything was great until my wireless card abruptly stopped working. It doesn't detect any wireless networks,uch less connect to them. I tried reinstalling the proprietary driver, but that hasn't worked.
View 1 Replies View RelatedI'm using 10.04 and it's been excellent all the way through up until this problem happened. My laptop's built-in SD card reader has stopped working out of nowhere.
Here are the basic facts:Laptop is a Compaq Presario CQ50-115NR I tried older Linux Kernels, it's not the newest kernel causing the problem. The SD card reader is not shown in disk utility anymore. It used to be shown, even when no SD card was inserted. Now? Nothing.lspci output:
Code:
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
[Code]...
Well, I have an issue with my wireless card in Ubuntu 10.04, my wireless card model is:
the D-Link WIRELESS N 150 DESKTOP ADAPTER DWA-525. I was already successful getting it to work by using the RaLink driver suggested here and following the instructions in their readme.But after a system update I performed through Update Manager (in which I guess the kernel was updated), the device stopped working completely. The wireless icon remains(in the top panel), but it displays a red exclamation mark next to it
I'm using Ubuntu 9.10 on a Lenovo ThinkPad T61 using an Intel PRO/Wireless 3945ABG. My laptop's ability to connect to a wireless network stopped last night, and I'm not sure why. It's definitely something on my end, as my roommate can connect to the internet on a Windows box. I can wire in without a problem, but that's a pain and my Ethernet cable got lost in the shuffle when I moved back to school. I've been able to get into this network before and nothing about it has changed. I've been able to hibernate and restart and such and nothing has ever needed to be reset.
The router's a D-Link WBR-2310. Wicd and Network Manager see the network (I'm back to using wicd) , but wicd appears to get stuck at "Obtaining IP address..." and says "Unable to connect: Cannot obtain IP address". I know my password is correct (I set up the router and I'm the CS undergrad in the apartment so I manage it), lspci sees the wireless card, ifconfig and iwconfig return information about the interface, dmesg|grep wlan0 doesn't seem to have anything terribly out of the ordinary, but here's that output:
Code:
allyanncah@taliesin:~% dmesg | grep wlan0
[ 23.514202] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.609016] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.756143] wlan0: direct probe to AP 00:24:01:cb:4e:7e (try 1)
[ 38.758791] wlan0: direct probe responded
[ 38.758796] wlan0: authenticate with AP 00:24:01:cb:4e:7e (try 1)
[ 38.760587] wlan0: authenticated
[ 38.760609] wlan0: associate with AP 00:24:01:cb:4e:7e (try 1)
[ 38.763318] wlan0: RX AssocResp from 00:24:01:cb:4e:7e (capab=0x431 status=0 aid=1)
[ 38.763322] wlan0: associated
[ 38.765502] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready .....
I've tried:
- reinstalling wicd
- uninstalling wicd and installing network-manager
- restarting
- shutting down and booting back up
- restarting the router
- sudo /etc/init.d/networking restart
- taking the interface down and back up with ifconfig
I haven't changed anything recently in regards to my wireless card, and all the fixes I've tried are things I've done before without an issue. The only thing I'm wondering about is if doing a hard reset might have broken something (I know this is a cardinal sin, but there's a whole 'nother problem I haven't been able to fix with the OS hanging every once in a while over a VPN daemon when it tries to shut down or restart -- I've left it for hours to see if it actually gets anywhere and no luck, won't do a soft reset). I'm nervous about reinstalling the driver just because I've never had to do it and drivers are a finicky business. I imagine there's a config error somewhere?
I have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
[Code]...
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
I have 2 sound card in my laptop oand one of them is not working (the hdmi one)how can i make it work?
View 1 Replies View RelatedI am using a Fujitsu Amilo pi3560 with a Realtek rtl8172 wireless card, and running the latest driver (rtl8192se_linux_2.6.0014.0115.2010). The OS is Ubuntu 9.10.
Everything runs perfectly - when my laptop is connected with the power cord. But when I go battery the wireless disconnects after a few minutes. It then asks for the wpa password, searches for the router, asks again, and so on indefinitely, until I reboot and it all replays once more.
I was given a Samsung SMB 2330 (TFT) monitor for Christmas. It is pretty nice and nice and big. Here is the problem: when I connect it to my laptop (Dell XPS M1530 with nVidia GeForce 8600M) I can use the Nvidia Settings Manager to view and use both screens, but on the Samsung screen there are lighter colored blurry lines that race up and down. You don't see this so much on lighter windows, but any darker color shows them clearly. This is a constant whether I set the refresh rate on "auto" or 60 kH (which is what the manufacturer says it should be).I can't for the life of me figure out how to get rid of this problem. I am fair to middling on my Linux experience, but this is the first time I have wrestled with dual monitors and I'd really appreciate any pointers The screen is great, but the flicker is distracting to say the least.
View 5 Replies View Relatedam running ubuntu 10.10; Laptop see others network but its can't connect to my network. This card work under Windows XP.
View 1 Replies View RelatedI just installed Slackware 13 with xfce and everything went well (eventually). At first, my wireless didn't work, but then I found /etc/rc.d/rc.wireless.conf. Everything was working, and I was happily surfing and downloading packages.But then one day... It just stopped! I tried to ping google, and it could send packets but not receive them.I'm connecting through an unlocked network in my building, so I guess it's DHCP (thats what i set it up with the first time 'round
View 1 Replies View RelatedI recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
I have a laptop running Ubuntu 10.04 w/ wireless connection to desktop running Windows 7. I had it set up so I could execute a script to send a wakeonlan to the desktop. It worked fine for several weeks, but all of a sudden it stopped working. I've checked my script and it still looks good as far as I can tell. (I'm not that adept at script writing, so I wouldn't necessarily recognize a problem.) I've also checked the Windows machine to make sure the network adapter still is set to allow wake-on-lan.
BTW: my wake up script is as follows:
#!/bin/bash
wakeonlan xx:xx:xx:xx:xx:xx
Where the x's replace my actual MAC address.
Recently my wireless stopped working on my Debian testing system. It just doesn't connect. The best I get (only after a reboot) is that it says it did connect, but failed to get IP address. But usually it just tries to connect, disconnects straight away, connects again etc. so it never manages to associate correctly.
I am sure it did work about a month ago, stopped working after recent upgrades from the repository.
I'm running the latest KDE4 and have gotten used to my Yakuake dropdown console.
The problem is that the global shortcuts in KDE stopped working, which basically makes my whole environment unusable now.
How can I fix this?
I restarted kded as suggested in some forums, but to no avail.
My fetchmail stopped working for gmail. These are the error messages:
Code:
Mar 29 15:31:17 cannabis fetchmail[8814]: pop.googlemail.com fingerprints do not match!
Mar 29 15:31:17 cannabis fetchmail[8814]: SSL connection failed.
Mar 29 15:31:17 cannabis fetchmail[8814]: socket error while fetching from xxxxxxxxxx@gmail.com@pop.googlemail.com
Mar 29 15:31:17 cannabis fetchmail[8814]: Query status=2 (SOCKET)
Mar 29 15:31:17 cannabis fetchmail[8814]: pop.googlemail.com fingerprints do not match!
Mar 29 15:31:17 cannabis fetchmail[8814]: SSL connection failed.
Mar 29 15:31:17 cannabis fetchmail[8814]: socket error while fetching from xxxxxxxx@gmail.com@pop.googlemail.com
Mar 29 15:31:17 cannabis fetchmail[8814]: Query status=2 (SOCKET)