Ubuntu :: Uninstall ATI Drivers And Reinstall Original Files
Jun 12, 2011
I am running a recently installed minimal install. I am having some fun building the system up but trying to keep things slim. I have installed the ATI catalyst drivers working from the tutorial here under 'Installing the Restricted Drivers Manually': [URL]... After successfully getting the ATI driver running, I realise I really don't need or want it and am wanting to uninstall it completely and return the config to the way it was. Some of that I can do with the aid of some of the links I have found but installing the ATI drivers no doubt killed some of the packages that were there in the first place (graphics was fine in the first place incidentally). Question: What might these squashed packages be so I can reinstall them and have graphics setup as it was before I installed the ATI drivers and how can I remove all trace of the ATI drivers?
View 8 Replies
ADVERTISEMENT
Jun 11, 2011
I've destroyed my desktop.
I'm using Ubuntu 11.04 and I would much like to uninstall (including any config files) and reinstall the windows manager.
Is there a set of commands I can run to achieve this?
View 1 Replies
View Related
Mar 2, 2011
I accidentally deleted the pictures folder in the Home folder (the content was backed up fortunately). How can reinstall this original folder to place the pics back? I cannot find the location. The theme is Ambiance with the Ubuntu-Mono-Dark icons.
View 2 Replies
View Related
Apr 23, 2010
I'm running lenny 2.6.26-2-686 and have accidently lost some of my kernel modules is it possible (and painless) to reinstall this kernel? if I do what data will I loose? will it effect my raid1 setup?
View 4 Replies
View Related
Apr 21, 2010
I managed to break my video4linux module rendering all my video devices useless, can anyone tell me how to reinstall it on Debian Lenny as per the original install. I'm looking for the original one and not v4l2. 2.6.26-2-686
View 4 Replies
View Related
Jan 15, 2010
when I boot into Fedora right before the login screen I get a black screen with a command line.How can I uninstall the drivers and get it work again without ATI Drivers? I have switchable graphics and for Fedora have to switch them in the BIOS but with integrated as well as discrete graphics I get the same black screen.I have the LiveDVD ready and only need advice on howto log in in text mode or recover via LiveDVD.
View 1 Replies
View Related
Jun 24, 2010
i have an hp laptop currently dual booting ubuntu 10.04 and windows xp. i want to install windows 7 on the windows xp partition of the hard drive. to do this do i insert my win 7 disk while running xp and load the installer from there or i need to uninstall ubuntu and then reinstall it after putting win 7 on? or whats the easiest way to put win 7 on without messing up or involving the ubuntu partition?
View 3 Replies
View Related
Nov 13, 2010
I upgraded from Ubuntu 10.04 netbook to 10.10 netbook and I want to go back to 10.04. Adding to the problem, I have this computer dual booted with Windows XP. Is it possible to do this somehow?
View 3 Replies
View Related
May 3, 2011
How do I completely uninstall Mendeley in order to reinstall it again in Ubuntu 10.10 (64 bit)?
View 2 Replies
View Related
Mar 3, 2011
Running Ubuntu 10.04 and I'm trying to re-install Mac OSX back onto my MBP. I'm running competely off of GRUB and I have no other partitions for any other OSs running. Popped in my MAC OS CD and came up with this error.
Unable to mount location
Error mounting: mount exited with exit code 1: helper failed with:
mount: block device /dev/sr0 is write-prtected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
How should I go about with removing Ubuntu, and re-installing MAC OSX?
View 3 Replies
View Related
Mar 19, 2010
I'm on Slackware 13 and use XFCE (no KDE or QT) as my DE and Exaile as my music player. I try and install all my software using slackbuilds. Recently I came to know that Exaile 0.3.1.0 was out and so decided to upgrade from my current 0.3.0.1 . So I downloaded the source package and the slackbuild, and after changing the version number in the Slackbuild script, went ahead with the installation. The install went fine but exaile wont start up as the new version required a newer version of gtk+.
Since, I was not ready to invest my time in that, I uninstalled the newer version through pkgtool. I had the precompiled library left from my previous 0.3.0.1 install so, I installed it using installpkg. Now the problem is that when try to launch exaile, the splash screen shows up, but quickly disappears (this was also happening with the newer version, when it required newer gtk+). The error I am getting is:
Code:
bash-3.1$ exaile
INFO : Loading Exaile 0.3.0.1...
INFO : Loading settings...
INFO : Setting up deferred idle manager function...
INFO : Loading plugins...
INFO : Loading collection...
/usr/lib/exaile/xl/common.py:342: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 self.message = message
/usr/lib/exaile/xl/common.py:345: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 return repr(self.message)
Also, when I logged in as the root, exaile would launch without any problems or glitches.
View 7 Replies
View Related
May 19, 2010
I was having issues with the mic or line in on my onboard sound card, while trying to get my tvtuner patched in, later I gave OSS a try, I could not get it to work and decided to go back to Alsa, now my soundcard is not functioning.I have followed quite a few different guides, one of which is the sticky, please forgive me for not remembering which guides. I'm going nuts over this.As you can see below it looks like it is still using the oss driver.
uname -a
Linux freekbox 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux
aplay -l
aplay: device_list:223: no soundcards found...[code].........
View 1 Replies
View Related
Mar 31, 2011
So I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
View 2 Replies
View Related
Apr 12, 2011
I use slackware 13.1-current on desktop with 4gb ram, nvidia geforce 210, and AMD cpu.
I have problem with my X starting using 40-50 MB of RAM and after some hours suddenly rises up to 400-500 MB. I have tried KDE ( with and without desktop effects ), LXDE, 3 different nvidia drivers ( the one made from the slackbuilds ) but no luck.
I decided at last to use the default slackware's driver. I uninstalled the nvidia driver and do startx, but it says code...
I have no idea about GPU and drivers, it was a mistake to install a driver for my nvidia just to have desktop effects. I just want to bring the things back as at the beginning of the systems installation and the default drivers.
Do you have any idea how to do it?
View 8 Replies
View Related
Jun 26, 2010
I seem to have lost my show desktop widget. There is just the red x as shown in the screen cap. I did try to uninstall and reinstall it but no luck. Does anyone know how i can get it back?
View 2 Replies
View Related
Mar 28, 2010
i have a large directory of .bsp files that i would like to convert .bz2 archives. I've been searching for some time and all i can find is the obvious compress multiple files into one large archive. If anyone knows how to convert each file individually, while retaining the original file name (testmap.bsp would be archived as testmap.bsp.bz2)
View 5 Replies
View Related
May 26, 2010
how I can uninstall my old driver (10.4) so I can update my drivers to 10.5? I have a lot of issues with 120.4 and want to make sure all config files are wiped clean.
View 7 Replies
View Related
Mar 21, 2010
Do I need to uninstall the drivers for the old card first?
View 1 Replies
View Related
Oct 29, 2010
ok so i have a clevo x8100 laptop with two 5780's in crossfire. Im not exactly sure where to check in linux but i remember im using the fglrx drivers...which from what i understand are the crappy "safe" drivers. I've downloaded the latest linux x64 drivers for the card...
do i need to uninstall the old drivers first before i attempt to install the new one? also, if i do need to uninstall the old one, do i need to disable all my compiz special effects too? I could just see that creating a problem. im afraid im ruining my ubuntu install now that i've got everything configured the way i want minus the video drivers.
View 3 Replies
View Related
Sep 6, 2010
I want to wipe my drive and do a clean install of 10.04, but I don't want to bust out the 50ft network cable to get back online. I currently have the proper wireless drivers installed. Is there a way to save them off to a USB drive, so I can reinstall them after a clean install of Ubuntu? The driver I need/use is the Broadcom STA wireless driver.
View 2 Replies
View Related
Aug 27, 2010
Basically, I want to be able to create the perfect disk image of a CLEAN Ubuntu installed in a 30 gb partition. The problem is, if I install Ubuntu, then some drivers are installed automatically. I am using an old computer at the moment (my main is back at home) and I want to be able to create an image so that when I restore that image onto my main computer, it is not cluttered with drivers of the old computer. Is there a method that can be used for uninstalling drivers?
I am looking for the cleanest way to uninstall drivers, hopefully to the point where it will not leave any "residue" That is my first question. My second question (in general about disk image--I have never actually created nor restored an image): Can I create an image of partition A and restore the image on partition B? Basically, creating an image of one partition and restoring it on another partition. Or does it have to be restored on the original partition?
Also, what if it is the same scenario but partition B is a larger size? I know that if partition B is smaller, it cannot be done because the image is larger than the partition. Finally, can partition A be restored onto a different hard drive? I have yet to find answers of these questions on different forums in other sites (this is my 3rd try). I know that the Ubuntu community is extremely active and more than willing to share their knowledge.
View 3 Replies
View Related
Feb 25, 2011
I have intel GMA 4500M graphic card. In synaptic package manager I found out that there are a bunch of installed packages for nvidia and ATI. I was wondering if I can delete this files since i have INTEL graphic card. Any recommendations for uninstalling unneeded files?
View 9 Replies
View Related
Jun 16, 2011
I have Fedora 15 on my 64 bits PC, and i install the nvidia propetary driver using the rpm fusion repository and the metapackage "kmod-nividia".
The installation works fine, but the drivers not, it seems like Nouveau run's better.
So... can i uninstall the nvidia drivers and fedora automatically use Nouveau??, or the system loose both drivers?
View 3 Replies
View Related
May 3, 2011
I have a fresh install of 11.04. I am trying to install the "additional drivers" Broadcom STA wireless on my dell laptop. The drivers worked correctly pre-install on the boot up test run, but now they won't activate or uninstall.
On activation attempt, it says : installation of this driver failed. Please have a look at the log.
The log reads: Quote:
2011-05-03 11:49:06,603 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,637 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,679 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code]...
View 9 Replies
View Related
Jul 2, 2011
dear the Admin(s) and all of the members
suppose that we wanna install a program, so we must do this : sudo apt-get install program_name after installing that file, yeah indeed we can run that program, but where can actually we find the original-downloaded file in our ubuntu?
View 2 Replies
View Related
Jan 26, 2010
Could someone help me find a way to rename a file to a different name containing parts of its old name?
For example:
Original file name: filename1.abc.xyz.some.other.stuff
Final file name: filename1.abc.xyz
The length of the file name is not constant. the abc.xyz is not constant but that format is (three numbers.three numbers) the .some.other.stuff is not constant and its what i want to get rid of
View 8 Replies
View Related
May 19, 2010
Deleted my ati drivers accidently during a botched upgrade. Have been trying to fix the problem from things I read on here, made a thread but can't get online to execute it.Found my install dvd tried running repair and in the process deleted my windows partition(anyway to get that back?) and still no previous ati drivers or gnome installed.
When I boot up i see SUSE LINUX not opensuse... no grub So my question is how do I install ati drivers from the dvd and how do I install gnome or kde from install dvd? did i royally mess up and basically now just completely reinstall opensuse 11.2 completely? and if so can I recover files from my deleted windows partition and previous opensuse partition?
View 5 Replies
View Related
Oct 12, 2010
After 2 weeks of work to restore my server to working condition (after a failed HDD) I am facing a very strange problem. Basically, random files (config, scripts, etc) are either going mising or are reverted to original states. Example1: This morning, I went to use VNC to remote login in my server. I couldnt start the VNC server. I used ssh to login and searched for a lock file (.pid) or anything else preventing VNC from starting, only a few minutes later to open rc.local_shutdown and discover that it was only containing:
Code:
#!/bin/sh
#
# /etc/rc.d/rc.local: Local system initialization script.
#
# Put any local startup commands in here. Also, if you have
# anything that needs to be run at shutdown time you can
# make an /etc/rc.d/rc.local_shutdown script and put those
# commands in there.
All my custom commands were gone...
Example2: Yesterday, I was still using my NFS shares to play music and movies. All worked perfectly. A few minutes ago, I tried to mount the NFS shares on my laptop but it did not work. I used ssh again to login in the server and discovered that nfsd was not running. I tried to start it and it said that there were no exports to share (or something like that). I opened /etc/exports and it was PLAIN empty!! However, I had a export.orig file in /etc... SO somehow, something erased my exports file but care to create a backup of it!
Question: What could do such stupid stuff? Hints: I did not install anything. I did not fool around with anything. The server was unpowered between yesterday and today.
View 3 Replies
View Related
Dec 31, 2010
Initially, I was trying to get around a Nautilus log in error. Using this, I was able to log in, but I entered what seems to be a perfectly clean version of Ubuntu...with no access to my files. [URL].... Now, I can't seem to find any of my original files. Some of the commands I entered in the terminal included:
[code]...
I'm afraid that I may have deleted the files, or have moved them to another user or someplace on the drive I can't see.
View 6 Replies
View Related
Dec 9, 2010
Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 Replies
View Related
