General :: Possible To Uninstall Ubuntu 10.10 Netbook And Reinstall 10.04?
Nov 13, 2010
I upgraded from Ubuntu 10.04 netbook to 10.10 netbook and I want to go back to 10.04. Adding to the problem, I have this computer dual booted with Windows XP. Is it possible to do this somehow?
I want to uninstall the above mentioned Ubuntu from my Toshiba laptop (3 months old/new?),since i already have the same Desktop version. I have tried the CD booting of XP and a message(blue screen)appeared telling me to check for viruses and to rule out a corrupt disk (The laptop never had a Windows installed on it!The laptop has no internet connection of any sort and that's the SIT.REP.as the Green Berets (YOU) would like to know! i need it to install Linux Mint(THE BRAND NEW ONE)alongside the XP!
i have an hp laptop currently dual booting ubuntu 10.04 and windows xp. i want to install windows 7 on the windows xp partition of the hard drive. to do this do i insert my win 7 disk while running xp and load the installer from there or i need to uninstall ubuntu and then reinstall it after putting win 7 on? or whats the easiest way to put win 7 on without messing up or involving the ubuntu partition?
currently have ubuntu netbook remix installed as the only OS on my netbook. I've been looking everywhere but I can't find any place where there is a method to remove ubuntu and reinstall windows 7.
I am running a recently installed minimal install. I am having some fun building the system up but trying to keep things slim. I have installed the ATI catalyst drivers working from the tutorial here under 'Installing the Restricted Drivers Manually': [URL]... After successfully getting the ATI driver running, I realise I really don't need or want it and am wanting to uninstall it completely and return the config to the way it was. Some of that I can do with the aid of some of the links I have found but installing the ATI drivers no doubt killed some of the packages that were there in the first place (graphics was fine in the first place incidentally). Question: What might these squashed packages be so I can reinstall them and have graphics setup as it was before I installed the ATI drivers and how can I remove all trace of the ATI drivers?
Running Ubuntu 10.04 and I'm trying to re-install Mac OSX back onto my MBP. I'm running competely off of GRUB and I have no other partitions for any other OSs running. Popped in my MAC OS CD and came up with this error.
Unable to mount location Error mounting: mount exited with exit code 1: helper failed with: mount: block device /dev/sr0 is write-prtected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
How should I go about with removing Ubuntu, and re-installing MAC OSX?
I'm on Slackware 13 and use XFCE (no KDE or QT) as my DE and Exaile as my music player. I try and install all my software using slackbuilds. Recently I came to know that Exaile 0.3.1.0 was out and so decided to upgrade from my current 0.3.0.1 . So I downloaded the source package and the slackbuild, and after changing the version number in the Slackbuild script, went ahead with the installation. The install went fine but exaile wont start up as the new version required a newer version of gtk+.
Since, I was not ready to invest my time in that, I uninstalled the newer version through pkgtool. I had the precompiled library left from my previous 0.3.0.1 install so, I installed it using installpkg. Now the problem is that when try to launch exaile, the splash screen shows up, but quickly disappears (this was also happening with the newer version, when it required newer gtk+). The error I am getting is:
Code: bash-3.1$ exaile INFO : Loading Exaile 0.3.0.1... INFO : Loading settings... INFO : Setting up deferred idle manager function... INFO : Loading plugins... INFO : Loading collection... /usr/lib/exaile/xl/common.py:342: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 self.message = message /usr/lib/exaile/xl/common.py:345: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6 return repr(self.message)
Also, when I logged in as the root, exaile would launch without any problems or glitches.
I was having issues with the mic or line in on my onboard sound card, while trying to get my tvtuner patched in, later I gave OSS a try, I could not get it to work and decided to go back to Alsa, now my soundcard is not functioning.I have followed quite a few different guides, one of which is the sticky, please forgive me for not remembering which guides. I'm going nuts over this.As you can see below it looks like it is still using the oss driver.
uname -a Linux freekbox 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux
aplay -l aplay: device_list:223: no soundcards found...[code].........
So I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
I use slackware 13.1-current on desktop with 4gb ram, nvidia geforce 210, and AMD cpu. I have problem with my X starting using 40-50 MB of RAM and after some hours suddenly rises up to 400-500 MB. I have tried KDE ( with and without desktop effects ), LXDE, 3 different nvidia drivers ( the one made from the slackbuilds ) but no luck. I decided at last to use the default slackware's driver. I uninstalled the nvidia driver and do startx, but it says code...
I have no idea about GPU and drivers, it was a mistake to install a driver for my nvidia just to have desktop effects. I just want to bring the things back as at the beginning of the systems installation and the default drivers. Do you have any idea how to do it?
I seem to have lost my show desktop widget. There is just the red x as shown in the screen cap. I did try to uninstall and reinstall it but no luck. Does anyone know how i can get it back?
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
So I was messing around trying to uninstall Nibbles and reinstall since I have an issue starting that game and something happened and removed the submenu under Games called "Logic", which had another whole list of games.
Is it possible to reinstall the games package or reinstall the update?I'm thinking more of the lines of a system restore or something so back 2 days from today.
I cannot uninstall Firefox, nor can I uninstall Chromium; one always stays if the other is uninstalled. For example, if I remove Firefox, Chromium will appear in its place and vice versa. This has got to be one of the weirdest bugs I've ever seen on Ubuntu! So, how can I uninstall both web browsers?
I recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
I am having trouble installing Ubuntu 10.10 netbook remix edition onto a Acer Aspire one netbook. I am attempting to install the OS from a 16GB PNY usb drive w/ the usb-universal installer and ubuntu 10.10 netbook remix .ISO
The reoccurring problem that I am encountering is that when I boot from the USB-drive and begin to install everything seems to be working, and then it is stuck at the menu where it asks who are you?; and of course i have filled in everything asked and at the bottom where you can look at what its doing in the terminal/detail section all it says is ready when you are, and the forward tap is unselectable.
For the past 2hrs I have been struggling to make KDE launch plasma-dekstop instead of plasma-netbook, but all in vain.I removed, then purged plasma-netbook and plasma-netbook-default-settings packages but after logging out and re-logging in the Netbook UI was back! After restarting the system now I can't even seem to get the KDM. I am greeted with a black screen.--- I restarted the system again and the nasty little bugger is back again! This is so frustrating. How do I get plasma-desktop to load instead?---- Great now I can see that plasma-desktop and plasma-netbook both are running simultaneously! netbook on top of desktop. So my final Q is how do I stop plasma-netbook from loading?
I installed Ubuntu Netbook 10.04 and immediately noticed the keyboard of my eeepc 1000HE was abnormally warm. Since I dual boot XP I booted to XP and found the fan running faster to compensate for the previous heat. This did not happen on Ubuntu-the fan just was barely running. I had to place the side of the netbook in order to feel the fan running. I issued "sensors" in terminal and it showed 67 degrees C for the cpu temp. Is the latest Ubuntu such a resource hug that it heats up the CPU?
i have ubuntu 10.04 64 bit installed and configured and working sweet. I have reinstalled windows 7 and now i can't boot ubuntu i've tried easybcd to add ubuntu to win boot loader which failed and tried to follow the instructions to reinstall grub through a live cd which i am in at the moment. i go to a terminal and type sudo grub and it brings up the grub prompt. i have mounted all discs and entered the command find /boot/grub/stage1 and it keeps spitting this back at me Error 15: File not found
my hd is a 80gb with partions like this /dev/sda1 105mb ntfs system reserved /dev/sda2 45gb ntfs win 7 home premium 64 bit /dev/sda3 34gb ext4 ubuntu 10.04 64 bit /dev/sda4 1.5gb linux swap
A friend wants to sell her UMPC, witch has Windows Vista and Ubuntu. The system doesn't have a CD/DVD drive, so how do we remove Ubuntu and restore the mbr to a windows one?
I have a toshiba laptop which came with vista as default os..but 6 months back i started ecountering hell of problems that forced me 2 switch to ubuntu..though i liked it my dad cant run half of his business cd's...not even in vmware,wine...so now i need to help in getting windows xp installed..i have ubuntu live cd and the installation cd for xp..but i cant find the right technique..i read thru a few sites wer d wrote abut using gparted from the live cd n i tried it out but it was in vain..now i dont have any os on my harddrive..d message that i get when i insert the xp cd is that it cannot find any hard drives despite i having divided it into 4 parts: ntfs, fat32, unallocated.
A few months ago I unstalled Ubuntu on my PC and was dual booting it and Vista. It worked great, love ubuntu. However I did have to run windows for some things so Dual booting was a perfect set up. However, recently my windows messed up and I had to reinstall it. Now when I start my computer I don't have the option to boot Ubuntu and I can only run vista. My hard drive is still partitioned so I'm pretty sure Ubuntu is still there, just unaccessable.Do you guys(or girls) have any ideas on how I can boot Ubuntu without having to reinstall?
I am having some weird problems on my Ubuntu Hardy. Single partition. I wonder if there's a chance i can avoid the reinstall afresh and try some sort of repair from the ISO cd...?! Is it?