I have a Coby MP826-8G USB MP3 player that when plugged into my Windows XP machine is detected, installs, and lets you drag files into it and then plays them without any problems.
When I plug it into my Ubuntu Linux v10.04 PC (completely different PC) the USB icon on the MP3 player lights up flashes a couple of times, then it starts going into battery charge mode so I know that it is getting a connection to the PC, but when I run LSUSB this is what I get:
landon@Core2Duo:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
It does not show up in Places - Computer either, although if I plug in my old Phillips 512meg MP3 player it works just fine.
If I run GPARTED it shows both of my SATA hard drives and the SD memory card for my camera that is plugged into the 12-in-1 card reader that is listed above in the LSUSB dump.
using Ubuntu desktop ltd Ver.? mp3player type - philips gogear 1gb so the problem is that my player just one day got frozen when I turned it on..(just shows philips logo and hangs on) the last time this happened I formatted it in winxp with a lot of effort.. in linux when I try to plug it in it just shows "cant mount device dev/sdb/" I already tried formating it with gparted but it isnt possible because I'am not able to choose "format" from menu.... is there are any other way that I can format it using gparted or another app.
New Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.
I have crunchbang lite 9.04.01 installed on an old laptop and I am very pleased with it. apart from one thing, I am unable to connect to internet as it is unable to detect my NIC.
I am having trouble getting NetworkManager to detect my Huawei-Vodafone dongle and I can't figure out why. I went and checked on NetworkManagers website and I should be good to gobut no such luck. look at the following:
manpep@manpep-desktop ~ $ manpep@manpep-desktop ~ $ dmesg | grep -e "modem" -e "tty" [ 0.000000] console [tty0] enabled [ 47.951906] USB Serial support registered for GSM modem (1-port) [ 47.951958] option 3-2:1.0: GSM modem (1-port) converter detected [ 47.952990] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
[Code]....
Although "lsusb" see it (as usually) as Huawei model E620, in fact it's a much more recent one. It's the K3520, from last year.
I'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.
My wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
abhishek:/ # sudo /usr/sbin/iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a Flags: bus master, fast devsel, latency 0, IRQ 23 Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
I'm going to come right out and say I am a complete novice with Linux/SUSE. The equipment I'm having a problem with is a little web-server that was purchased by my employer that has, quite suddenly, stopped functioning. I was changing the IP address within YaST, at which point the device offered to update itself, which I saw no harm in. Post-update, however, I was unable to so much as ping the device.
I tried "ifconfig eth0": "Error fetching interface information: Device not found." I went into network settings via YaST and found that there are two cards now listed as: RTL8111/8168B PCI Express Gigabit Ethernet controller Both IP addresses are "Not configured". The information pane, for both cards, cites:
RTL8111/8168B PCI Express Gigabit Ethernet controllerBusID : 0000:02:00.0 Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. The only difference in either of the cards is the BusID (0000:02:00.0 and 0000:03.00.0)
I can neither edit nor delete either of these cards. As I mentioned, I am a total Linux novice, and am at a total loss for what to do next, or even how to find critical information about the system itself. I know enough to check dmesg, but not enough to have any clue what to look for in the output.
My SATA CD-ROM is not being recognized by Ubuntu. I was not able to install from CD either, I have flash drives and other ways to install, but I need CD-ROM to work.
Ive seen this question allot but not exactly like my issue, MY usb mic AK5370 is unrecognized AT ALL and lsusb wont run. I just installed 9.10 and it wasnt seen on 9.04 either.
I have used other mp3s with no problem being detected. They always popped up on the desktop after i plugged them into the usb. This time I have a Coby MP815 player and nothing happens when i plug it into usb. Is this a microsoft proprietary issue associated with this specific product? What do I need to do?
I do not have the manual for the Coby MP3 that is why I ask
I have a problem with Ubuntu and my USB printer no longer being detected. I have installed 10.04LTS (clean install) and then added kubuntu-desktop using Synaptic.My USB printer (EPSON DX4050) is now not detected when I book into GNOME or KDE session, but IS detected if I boot using a LiveCD.
I have Lucid Lynx installed and am very happy with how it is running. A minor problem is that some hardware is undetected ie my inbuilt webacm and TV card. I have run lshw and Device Manager and neither item shows up. Is there any way I can coax the system to detect them or am I out of luck?
Iam using Ubuntu(10.04) Desktop_edition in acer 5745 Laptop(64-Bit) , I got a Blaze USB to it and it is 32 bit (CrossPlatformUI-V1.0.27-SSTL-i386-ubuntu.deb).Iam not able to install tht deviceIs thr anyway that can work on 64 bit or should i buy a new device which supports my architecture
i have a problem with detecting PC in LAN. I have installed ubuntu 1(lucid lynx)10.4 to four PCs in our school. I have connected it to router. All four PCs can connect and browse internet but cannot detect each one in the local network. I have edited already the network connections. Each one has unique IP address.However, after several trial of connecting to PC within the LAN, still i failed to detect local PC.
I'm using Ubuntu 10.04 LTS and I'd like to upgrade to 10.10. I tried following these instructions:
[URL]
But the message notifying me of the upgrade does not appear after I install all of the 10.04 LTS updates. I've tried quit and relaunching the update manager and clicking "Check" a few times, but nothing has popped up. Is there some setting I need to have configured right somewhere?
I have three drives: 2x320 and 1x1.5TB. On one of the 320's I have Ubuntu and on the other I have Win7. The 1.5TB drive is NTFS and I can access it from within windows no problem.
The problem is that Ubuntu does not see it at all. In Gparted it does not show up in the drop down list on the top right. In Disk Utility it doesn't show up either.
I am attempting to Run Ubuntu 10.10 on a system with 128 CPU cores (64 dual core processors), but Ubuntu is only detecting 32 cores. I've looked and looked and cannot find any information on this topic; is there a core limitation in the kernel configuration that I missed? Currently I am using Ubuntu 10.10 Desktop, would I have more luck with 10.10 Server or another version?
I have this weird problem with my usb drive (Transcend 8 gb). It had been working fine for 2-3 months. But then all of my systems, except one stopped detecting this drive. Connecting the usb to these systems has no effect - no /dev file created and nothing shows up in dmesg and lsusb.
And on the one system (out of 5) where it works properly ,lsusb has this output: Bus 002 Device 007: ID 8564:1000 // As seen here, there is no device name listed Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 001 Device 003: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I didn't do anything special with this usb, just using it as normal (data transfer etc). And no, I don't connect my usbs to Windows systems. I have formatted it, ran fsck but nothing worked.
I'm running Ubuntu 10.04 atm and it's not detecting my USB stick.Well I think it knows it's there but I can't open it and well,not too familiar with all the terminal codes thus I could use some help in that department.I can get the USB stick to work on windows and never had a problem with it really...
If I put an Audio CD in my CD-ROM drive, then try to open Sound Juicer, I get an error saying that Sound Juicer cannot find any CD-ROM Drives to read. I can't rip my audio cd.
Similar attempts in K3b yielded similar results, albeit differently worded error messages.
I am using Ubuntu 9.04 with latest updated kernel,Yestarday I purchased a Netgaer WG111v3 USB Adopter (Here is the Product Page).When I plug this device it instantly detected but can't browse the internet,Blue Led is also lit up &ystem->Administration->NetworkHere is the Screenshot.But this Wi-Fi USB dongle flawlessly work under Windows XP after installing the driver from the CD.In windows it can't be detected automatically but in Ubuntu can.So my question is,what else I need to perform to get the work done?Tried NDIS Wrapper but can't find any .inf file in the driver CD.Installed Wi-fi Radar but it can't did anything better.
I am just getting started with Ubuntu and love it so far. It has breathed new life into an old Compaq Presario V2000 and once I get up to speed on it I hope to start running it on all the rest of our machines.
The only major problem I am having is that none of the USB devices I have plugged in are being detected. From what I have seen online I should be getting a notification and should be able to view the devices at Places/Computer but so far, nothing. Googling this problem it appears that individual devices often don't work but I could not find anything on all USB devices not working.
I gotta say that Ubuntu 9.10 is a fantastic OS. I've been dual booting for about 4 years with Ubuntu and I want to scream to the world that Linux is finally a better OS than Mac or Windows. Having said that, I have an issue that I can't get around...
For some reason my USB headset is not being detected. I'm using the 32 bit version of Ubuntu 9.10 on a run-of-the-mill Intel-based desktop rig that I built myself. One of the mass-market programs that I still use is Skype so I can voice chat with friends and family - however, since the upgrade to 9.10 I can't get the mic to work (Plantronics USB headset - headset speakers work fine). The reason I can't get it to work is because the headset is not detected. The audio setting is set to "Analog Stereo Output" by default which does work perfectly in every other way.
just installed ubuntu 10.04 and the wifi networks are not detected as in 9.10.In 9.10 installing bcm-wl helped me.. but here the pacakage does not even install succesfully....i have installed b43..
During the installation of Ubuntu from a LiveCD my harddrive doesn't seem to be detected. I cannot create partitions. I used Gparted to shrink my Windows partition. There's 23 GiB of unallocated space, but it's not being detected.
Ive just installed a fresh 10.04, and my Xfi- Xtreme Music card isnt showing up ion the sound options.Ive tried installing the latest alsa using the script thing, and its still not showing up.
