i have a problem with detecting PC in LAN. I have installed ubuntu 1(lucid lynx)10.4 to four PCs in our school. I have connected it to router. All four PCs can connect and browse internet but cannot detect each one in the local network. I have edited already the network connections. Each one has unique IP address.However, after several trial of connecting to PC within the LAN, still i failed to detect local PC.
View 2 Replies
My modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies View RelatedI am using Ubuntu 9.04 with latest updated kernel,Yestarday I purchased a Netgaer WG111v3 USB Adopter (Here is the Product Page).When I plug this device it instantly detected but can't browse the internet,Blue Led is also lit up &ystem->Administration->NetworkHere is the Screenshot.But this Wi-Fi USB dongle flawlessly work under Windows XP after installing the driver from the CD.In windows it can't be detected automatically but in Ubuntu can.So my question is,what else I need to perform to get the work done?Tried NDIS Wrapper but can't find any .inf file in the driver CD.Installed Wi-fi Radar but it can't did anything better.
View 1 Replies View Relatedjust installed ubuntu 10.04 and the wifi networks are not detected as in 9.10.In 9.10 installing bcm-wl helped me.. but here the pacakage does not even install succesfully....i have installed b43..
View 4 Replies View RelatedI got my hands on an old BorderWare MXtreme MX-200 mail firewall and decided to install Ubuntu 10.04.1 on it and use it as a regular firewall - just for funzies. It's basically just a vanilla P4 PC in a 1U rack casing, so the hardware is not too exotic.After adding some RAM (and hooking up a CD-ROM to be able to boot from CD), Ubuntu installed and works fine, except for the second NIC.The NIC is there, enabled in BIOS and detected by Ubuntu:
Code:
$ lspci
...
[code]...
I installed ubuntu and i installed it using the install as a program inside windows options but when I boot into ubuntu it does not detect any networks I tried the command sudo pppoeconf it says ethernet card is not there and then it asked me to try modconf and when i try modconf it says that modconf is not installed How can i set internet connection in ubuntu 10.04 I get address assigned by DHCP
View 7 Replies View RelatedRecently I bought a USB modem SEOWON SWU-3120. According to the manufacturer, Linux is supported, but ubuntu doesn't detect it Both "usb-modemswitch-data" and "usb-modeswitch" packages are installed (I use GSM and CDMA modems without any problem).When I try to add a new broadband network I have only two choices: GSM and CDMA networks. WiMAX doesn't appear. Looks like Ubunto 10.10 "doesn't know" about the existence of the WiMAX technology. I sent some e-mails to the manufacturer but they never answered.
I friend of mine informed me to try the following commands:
sudo lshw -C network
lsusb
[code]....
I use ubuntu 9.10 and PCI connected Conexant CX11252 Modem. My GNOME PPP doesn't detects my modem. How can I create a connection? Is there any way to detect my modem and connect ? or ubuntu is fit only for broadband? I think most of the activities in ubuntu depends on internet. I can't do any work. I am losing my money in Internet Cafe. Broadband is even not available in my resident area. Therefore. find a solution to connect internet via my dial up modem!
View 9 Replies View RelatedI have freshly installed ubuntu 9.10 and moreover i am completely a newbie to Linux. The problem now i am facing is, i am not able to configure my wireless router. I tried finding drivers for it in System->administration->hardware drivers. But it showed me none. Then i checked out one of the threads in this forum and came across the 'lspci -nn' cmd. This gave me the info abt my wireless network controller and it was : 'Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)'.
View 1 Replies View RelatedI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI run ubuntu 9.10. I recently convinced my wife to give it a shot. The problem is, the bluetooth dongle is detected and the icon appears when its plugged in, the mouse is found and says it is pointing in bluetooth manager but it does not move the cursor on the screen. I have tried 2 different dongles and both work correctly and control the mouse on my asus laptop. She is using a toshiba satelite. Both dongles show up in lsusb as hci0. I've tried everything on the forums and everything I could think of but no go. If she doesn't have use of the mouse for farmville I will be in trouble.
View 1 Replies View RelatedI just installed ubuntu 9.10 in my freinds laptop and it has a realtek 81878 wireless card...it detects the wireless networks but when i connect it just keeps on asking for the authentication key again and again.
View 8 Replies View RelatedI have bought a new laptop with W7 installed. And I installed dual boot with Ubuntu 9.10 on it.I tried to connect my laptop to Internet by Ethernet port. It works with W7, but Ubuntu doesn't detect my Network card .After some research on Internet, I suppose that it's a problem of drivers for this card.Here some parameters I could get :
>ifconfig :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
[code]...
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
I'm in serious need of some help. The network adapter on the motherboard of my main machine apparently failed about noon today. This machine serves as the firewall and router for my home office LAN, and so it has two network adapters, the second being a PCI card installed in the only PCI slot of the mobo. The mobo's adapter served the WAN while the PCI card serves the LAN.Since the mobo has only one PCI slot, none of the other PCI cards I have on hand could be used. Instead, I pulled an unused PCI-e dialup modem card from the machine, and bought a PCI express gigabit card to put in its place.
The problem is that the machine (running Hardy 8.04.4 LTS) does not recognize the new card at all. Running lspci shows only the old PCI card that serves the LAN. Similarly, running "sudo lshw" shows only the old PCI card together with a virtual adapter that's part of my VirtualBox installation on that system.I then dual-booted into Vista Home and attempted to install the new card there, using the CD that came with it. Vista detected the card and asked for the disk, but then was unable to find any drivers on the disk!The box says the card is from Star Tech, and the instruction sheet says its model is ST1000SPEX.If anyone can point me to the correct module to add to the startup list and/or remove from the blacklist, that may get me going again.
im on compaq presario cq40 (amd64 turion x2) and recently install ubuntu.10.04 using wubi with dual os.. im installed wireless braodcom BCM4312 802.11b/g LP-PHY 'bcm43xx-fwcutter_006-3_amd64.deb' driver for my laptop and restart my machine.. when i go to > hardware dirver, there is no driver installed.. any suggestion? or lists any driver compatible with my laptop..
View 1 Replies View RelatedI'm a ubuntu linux 10.04 LTS user with a problem. i have been using a vodafone 3G card in South Africa and it has been working correctly. I have used it since Ubuntu 9 and it was correctly detected all the time, so that's great.
But then I got myself a mifi 2352 device (for those who do not know, it is a device that shares a mobile 3G connection to at most 5 users using wifi. it also works in usb mode, like a normal 3G card when you plug it on computer. You can just google the device for more info.
My problem is when i plug in the device through the usb, Ubuntu does not detect, which is very frustrating. I've tried a lot of things, including installing "vodafone-mobile-connect_2.25.01-1_all" with no success.
Is there any reasobn why the mifi 2352 is not detected by Ubuntu?
I just recently installed ubuntu 10.04 and I am having no luck connecting to my network via wireless. I went into the top right with the little wireless icon to see no networks detected. I tried using lspci which came back with no wireless adapters[URL]..
View 3 Replies View RelatedInstalled 10.10 using wubi. My wireless NIC is not detected in ndisgtk (although the driver: PRISMA02.inf is installed). The lights on the DWL-G122 are on normally while operating under Windows XP, but turn off after it's unplugged and plugged back in under Ubuntu.
EDIT: I've attached an image of my wireless NIC so you know what I'm dealing with.
a few weeks back I got an Indian Reliance 3g dongle. I installed usb-modeswitch, plugged in and it seemed to work brilliantly in Ubuntu 10.04.The problem was it was dropping the connection every ten minutes. The logs had the error message "Terminating on signal 15".I had to unplug the dongle and then it would connect again.x the problem, I tried installing first Sakis3G and then Betawine, both of which were reported by some users to haved. Sakis said "the device did not report GSM capabilities"d no good.Installing Betawine was apparently a bad idea, as after that the dongle ceased to work with Network Manager and Betawine itself was useless. Uninstalling Betawine and re-installing usb-modeswitch did no good.Now, when I plug in the dongle, the logs say:Quote:
Nov 9 17:52:31 lauri-laptop kernel: [28563.368241] usb 5-2: new full speed USB device using uhci_hcd and address 3
Nov 9 17:52:31 lauri-laptop kernel: [28563.530547] usb 5-2: configuration #1 chosen from 1
[code]...
I've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies View RelatedI've just installed a fresh copy of Maverick Meerkat 64bit and I wanted to setup static ip, but unfortunately I can't because of invalid mac address detection during each startup. The message looks like this
Code:
dmesg |grep Mac
[ 5.988576] forcedeth 0000:00:07.0: Invalid Mac address detected: 0b:68:66:ea:0f:00
[ 5.988590] forcedeth 0000:00:07.0: Please complain to your hardware vendor. Switching to a random MAC I remember having the same problem on suse distro and the solution I found at that time, was to change the /etc/udev/rules.d/70-persistent-net.rules and edit it to look like this
[Code]...
I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..
View 2 Replies View RelatedI have BCM4113 LP-PHY on my HP ProBook 5230m (14e4:4727) wireless card with b43 driver installed (instructions here). I have firmware installed (/lib/firmware/b43, /lib/firmware/b43legacy), b43 module loaded (listed in lsmod output, dmesg says "Broadcom 43xx driver loaded"), but my wireless card is not detected anyway. The manual says I should see b43 in System > Admin > Additional Drivers, but there is only STA listed there.
View 1 Replies View RelatedI just installed ubuntu (latest version). Everything worked except when i plug the wifi adapter to the computer nothing happens... It wont show up for wireless network... What do i do? This adapter works great on xp, and its a ralink wifi adapter. I dont know which model version i have though because i bought it new on ebay and it never said model info... I also have a netgear wg111t, how would i get this to work as well?
View 3 Replies View RelatedI recently installed ubuntu on my computer and when i put in my network wireless usb adapter (Realtek RTL8191SU) it isn't recognize, and the internet doesn't work. When I do lsusb, it comes up with Realtek Corperation however. And also the light on it doesn't flash either.
View 9 Replies View RelatedI've used this computer to connect to a wireless router before. I recently moved and for some reason it isn't working.I have a too long of an lspci output to type (I'm on a different computer).
View 1 Replies View RelatedI have been using Ubuntu at my home laptop (Dell) have had no problem. However, recently I installed 11.04 in my office laptop - Lenovo B450, but 'm unable to connect thru wireless.
It is simply not detecting the wireless. I have a dual boot with Windows 7. Windows 7 detects wireless (surprisingly).
I have tried configuring the network connection in all possible way (manual / auto).
I know there are a million threads about this, but my problem tends to be slightly different. I've read the sticky on here, I've googled around for a few days now, I've re-installed new drivers, tried a lot of different things. A lot of people seem to be having the issue of being able to see wireless networks, but they can't connect. I'm not that far yet.
When I click on my connections area, near the top right of the screen, then I got to edit connections, under wireless there is no wlan0 or eth1, where as if I do the same for the wired network, it lists a eth0. For some reason my wireless is on eth1, but I can only see that though lshw -C network.
Sometimes my laptops wireless "Light" is on, and sometimes its not. When its on, it means the wireless is enabled. But even when it is on, unfortunately I still have the same issue. I'm on Ubuntu 11.04 64-bit. I'm using an Acer Aspire 7552G-5430, it has the BCM43225 Wireless card.
Here is my lshw -C network
network
description: Ethernet interface
product: NetLink BCM57780 Gigabit Ethernet PCIe
vendor: Broadcom Corporation
[Code]...
