I have used other mp3s with no problem being detected. They always popped up on the desktop after i plugged them into the usb. This time I have a Coby MP815 player and nothing happens when i plug it into usb. Is this a microsoft proprietary issue associated with this specific product? What do I need to do?
I do not have the manual for the Coby MP3 that is why I ask
Just got a new mp3 player that does not appear to be detected, seems to have trouble mounting. It tries to go in USB transfer mode but then just goes into charge mode. I run on ubuntu 11.04.
here is a print of the last lines of dmesg just after i plug in the mp3 player:
Code:
[21793.150092] usb 1-7: new high speed USB device using ehci_hcd and address 18
[21793.308537] usb-storage 1-7:1.0: Quirks match for vid 071b pid 3203: 80600
[21793.308624] scsi15 : usb-storage 1-7:1.0
[21794.302323] scsi 15:0:0:0: Direct-Access HiFiMAN USBDISK User 1.00 PQ:
[Code]....
After plugging in my mp3 player to usb it isn't detected, even though it powers up and charges. I do an fdisk -l and nothing. My lspci shows the controller and my mouse is detected. lsusb shows the Phillips gogear as the device and it is device 2. I did dmesg and at the end it showed
scsi 6:0:0:0: Device offlined - not ready after error recovery
I don't know if this is the issue or not but it's the only error I get, so I assume it's the problem.
I have my mp3 player not being detected on my Dell Fedora 9 OS. How can I solve this problem so as I can open the mp3 folders & add/remove its contents?
View 14 Replies View RelatedI have a Sony MP3 player which is a SOK-NWZ-B512F(B) model that couldn't detected by OpenSUSE. I did try on other pen drive which is a Kingston brand, it is detected and a pop-up message mention that I have an USB drive connected.
View 7 Replies View RelatedI'm having problems with video files, when i try to watch them on VLC player or Movie player or any other software, its spoiling my picture, colors are fuzzy, it is like, gray color is shown as yellow, white as blue and stuff like that.
View 7 Replies View RelatedI have installed xmms player on ubuntu 8.04 it works fine but it doesn't shows menu on right click on player, menu list displays but will blank.
View 1 Replies View RelatedCrystal Player has one very good playback speed troubleshooting feature - it uses large buffer of decoded frames (about 50% of RAM). Is there any player with such features in ubuntu?
View 4 Replies View RelatedI have a DVD with a error located at a certain time. Each time I watch the DVD and then come to that point Movie Player (or vlc player) returns a error. Now I want to rip this DVD but all the rippers I tried return a error at that point when they try to rip it. Rippers I tried:
- dvd::rip
- FFMPEG
- Acidripper
- Avidemux
Now I want to know ain't there a ripper which can read over these errors and still make a decent rip?
When playing coyright protected DVD's in Ubuntu 10.10: the following errors occur:Movie Player Error message:Error occured Could not read from resourceVLC media Player Error essage:Playback failure:DVDRead could not read block 0.Non copyright protected DVD's play fine
View 2 Replies View RelatedI'm trying to get my XMMS Player to work. I've been reading the linux bible and it has a whole section just on xmms player management. when I typed in xmms in the terminal i get :
So i went to synaptic package manager and installed xmms but all I found was xmms2 I guess its the newer version. I ended up installing it, but now when I type in xmms2 in the terminal (because if i type in xmms i get the same output as above), it brings me to a bunch of cli commands used for using xmms in the terminal. How do I get the "winamp" type GUI interface with xmms2, I tried looking for it in my applications menu (even under sound and video) and its nowhere to be found. I just wanna enjoy the player with its normal graphical tool not through the command prompt (which seems like the only choice right now).
I tried installing xmms through the terminal like this:
And get this:
And as I said before there's no xmms installer in synaptic only xmms2 (which I installed and got the CLI not the GUI version). I'm using Ubuntu Karmic Koala.
I recently installed the VLC media player. Now how do I make this my default media player? When I click on a video, Totem Movie Player still launches.
View 2 Replies View RelatedI recently installed Kubuntu 10.04 Lucid Lynx. It is working well, but Movie Player does not work, and Dragon Player plays videos/movies but with no audio. VLC works fine. how to either remove Movie Player and Dragon Player or make them work. I tried apt-get remove mplayer but that doesn't work. If not that, I wonder if the default media player can be changed to VLC, e.g., when you click any video it will start to play using VLC?
View 2 Replies View RelatedI've been away from Linux for a while, so I need to get informed about some of the 32- vs. 64-bit issues concerning video players and codecs. So, what is everyone using these days?
More specifically, is it possible to play, e.g., .wmv files with 64-bit Kaffeine (my favorite player) or any other 64-bit video player? If so, then which combination of player and codec should I use?
in software.opensuse.org site if we serch for a software the result will be like the following
vlc
KDE:Unstablelayground/openSUSE_11.4_KDE_Distro_Factory This is the stripped version of the VLC media Player. VLC media player is a highly portable multimedia player for various audio and video
[more]
1-Click Install
Manual Package Download
Go to OBS Project
i586 vlc-1.1.6.99-1.11.i586.rpm
src vlc-1.1.6.99-1.11.src.rpm
x86_64 vlc-1.1.6.99-1.11.x86_64.rpm
if i like to keep the setup(rpm) of the software which i should chose the above?
Iam using opensuse 11.1. I want to know which is the best player that can be used in suse, which should support all codecs. I have tried totem player, xine, kaffeine, Noautun etc. But none of them is good. I have tried to install vlc player, but it shows a lot of dependencies too..it was not successful.
View 2 Replies View RelatedIf I open hard drake the player is listed as a USB device. I have been advised to drag files in to the USB storage device but am clueless to where to drag them to.
View 1 Replies View RelatedIs there a way to use shockwave player or flash player on TOR browser?
View 3 Replies View RelatedI just installed Adobe Flash Player 10 and it says it's installed, when I go to firefox and Epiphany it still has flash player 9, Ive quited the browsers and everything Ive uninstalled/reinstalled still no luck.
View 9 Replies View RelatedMy SATA CD-ROM is not being recognized by Ubuntu. I was not able to install from CD either, I have flash drives and other ways to install, but I need CD-ROM to work.
View 7 Replies View RelatedIve seen this question allot but not exactly like my issue, MY usb mic AK5370 is unrecognized AT ALL and lsusb wont run. I just installed 9.10 and it wasnt seen on 9.04 either.
View 3 Replies View RelatedI have a problem with Ubuntu and my USB printer no longer being detected. I have installed 10.04LTS (clean install) and then added kubuntu-desktop using Synaptic.My USB printer (EPSON DX4050) is now not detected when I book into GNOME or KDE session, but IS detected if I boot using a LiveCD.
View 1 Replies View RelatedI have Lucid Lynx installed and am very happy with how it is running. A minor problem is that some hardware is undetected ie my inbuilt webacm and TV card. I have run lshw and Device Manager and neither item shows up. Is there any way I can coax the system to detect them or am I out of luck?
View 1 Replies View RelatedIam using Ubuntu(10.04) Desktop_edition in acer 5745 Laptop(64-Bit) , I got a Blaze USB to it and it is 32 bit (CrossPlatformUI-V1.0.27-SSTL-i386-ubuntu.deb).Iam not able to install tht deviceIs thr anyway that can work on 64 bit or should i buy a new device which supports my architecture
View 1 Replies View Relatedi have a problem with detecting PC in LAN. I have installed ubuntu 1(lucid lynx)10.4 to four PCs in our school. I have connected it to router. All four PCs can connect and browse internet but cannot detect each one in the local network. I have edited already the network connections. Each one has unique IP address.However, after several trial of connecting to PC within the LAN, still i failed to detect local PC.
View 2 Replies View RelatedI'm using Ubuntu 10.04 LTS and I'd like to upgrade to 10.10. I tried following these instructions:
[URL]
But the message notifying me of the upgrade does not appear after I install all of the 10.04 LTS updates. I've tried quit and relaunching the update manager and clicking "Check" a few times, but nothing has popped up. Is there some setting I need to have configured right somewhere?
I have three drives: 2x320 and 1x1.5TB. On one of the 320's I have Ubuntu and on the other I have Win7. The 1.5TB drive is NTFS and I can access it from within windows no problem.
The problem is that Ubuntu does not see it at all. In Gparted it does not show up in the drop down list on the top right. In Disk Utility it doesn't show up either.
I am attempting to Run Ubuntu 10.10 on a system with 128 CPU cores (64 dual core processors), but Ubuntu is only detecting 32 cores. I've looked and looked and cannot find any information on this topic; is there a core limitation in the kernel configuration that I missed? Currently I am using Ubuntu 10.10 Desktop, would I have more luck with 10.10 Server or another version?
View 9 Replies View RelatedI have this weird problem with my usb drive (Transcend 8 gb). It had been working fine for 2-3 months. But then all of my systems, except one stopped detecting this drive. Connecting the usb to these systems has no effect - no /dev file created and nothing shows up in dmesg and lsusb.
And on the one system (out of 5) where it works properly ,lsusb has this output:
Bus 002 Device 007: ID 8564:1000
// As seen here, there is no device name listed
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 001 Device 003: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I didn't do anything special with this usb, just using it as normal (data transfer etc). And no, I don't connect my usbs to Windows systems. I have formatted it, ran fsck but nothing worked.
I'm running Ubuntu 10.04 atm and it's not detecting my USB stick.Well I think it knows it's there but I can't open it and well,not too familiar with all the terminal codes thus I could use some help in that department.I can get the USB stick to work on windows and never had a problem with it really...
View 6 Replies View Related