Ubuntu :: Unable To Boot - Hibernation Failed / Fix It?
Feb 16, 2010
I apologize in advance.. I searched and there is way too much information on this board and wasnt sure what was applicable to my case. I suspect that I prematurely closed the lid on my netbook last night when shutting down...my wife heard beeping noises early this morning but wasnt sure where they came from. I think it was the netbook forcing shutdown from hibernation due to low batteries.
Computer wouldnt boot this morning and I get the following error code...
View 2 Replies
ADVERTISEMENT
Sep 8, 2010
I'm having trouble resuming from hibernation. The splash screen loads up with "Resuming from /dev/sda6" (this is the correct partition) and the HDD light shows it's reading the drive. It then stops reading and the loading animation starts up (I'm running Lucid). Then nothing, just the animation. I recently updated initramfs-tools to 0.98ubuntu2~lucid as hibernation wouldn't work at all with the old version (see [URL]). I've also installed this script because of errors on hibernation.
I've posted the output from recovery mode after hibernation below:
Begin: Loading essential drivers ... done
Begin: Running /scripts/init-premount ... done
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done
Begin: Running /scripts/local-premount ... [ 3.280440] PM: Starting manual resume from disk
[3.281560] Freezing user space processes ... (elapsed 0.00 seconds) done.
[3.281898] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[3.306778] PM: Loading image data pages (126908 pages) ... done
[11.121294] PM: Read 444708 kbytes in 6.96 seconds (63.89 MB/s)
[11.121388] Suspending console(s) (use no_console_suspend to debug)
[11.121606] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[11.123474] pm_op(): usb_dev_freeze+0x0/0x20 returns -2
[11.123477] PM: Device usb8 failed to quiesce: error -2
[11.123707] PM: Restore failed, recovering.
[11.149854] Restarting tasks ... done.
View 2 Replies
View Related
May 2, 2010
Have been using Ubuntu 9.10 since past 2 months and had similar power and screen saver options as I do now after upgrading to 10.04. ( "sleep" after 1 h, "lock screen" after 10 min, "hibernate" when "close lid" on a Dell 600m laptop)
With Karmic, Never had issues with closing the lid while the laptop was sleeping. Three times in a row noticed that if the lid is closed while laptop is in sleep mode, opening the lid results in a blank screen, HDD and CD drive spins, fan turns on. No response to keyboard and/or mouse. Pressing the power key: no response.
The only solution is to shut-down by holding the power key down for a few seconds and reboot. Cant imagine why there would be a problem, but wondering if there are others who also see the same thing and if there is fix to this. Right now, have disabled sleep and will see if problem shows up.
View 9 Replies
View Related
Feb 9, 2011
After upgrading from 10.04 to 10.10 I have had some problems booting my Ubuntu. It all started when restarting after the upgrade, and I got the error;
Code:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting / sys/ on root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or dirctory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= boot arg
BusyBox v1.13.3 (Ubuntu 1:1.13.3.1ubuntu11) built-in shell (ash)(initramfs) After searching the Internet, I found a "solution". I just had to boot with a USB stick with the Ubuntu Rescue Remix (the normal Ubuntu USB won't boot either), and i wrote;
Code:
sudo fsck /dev/sdb5
Now I could start my Ubuntu again. So whats the problem? If I turn off my computer the normal way, there is no problem, but if I log off, put it into sleep mode, if something happens and I have to turn it off with the button it goes back to the first problem, and I have to reboot it with the USB stick and fix it all over again! If I don't have the USB stick with me, I probably wont be able to use my laptop!
View 9 Replies
View Related
Aug 10, 2009
I am having a problem reconnecting to the internet when I put my computer in suspend or hibernate. For some reason when I put my computer in any one of these modes it disconnects from the internet, and I have no way of getting back on the internet after that. I use to have the option of "Enable Networking" on my top panel, but it seems to have disappeared for some reason. Is there any way to stay permanately connected to the internet, even when it is in hibernate mode, or could someone tell me how to get the enable networking icon back?
View 14 Replies
View Related
May 16, 2011
I'm in windows 7x64 playing Dwarf Fortress and other pointless things- need to work.I hibernate Windows to save my stuff, switch to Ubuntu.After finishing my work in ubuntu, I shut down and reboot into windows.
I do this a couple times per day over the past couple days, letting windows hibernate when I'm not working at all. All of my ubuntu sessions ended on shut-down. My most recent switcheroo did NOT involve me mounting my windows partition while in Ubuntu. After switching, I went about an hour before hitting KERNEL_DATA_INPAGE_ERORR surrounded by this wonderful blue color.
View 1 Replies
View Related
Nov 1, 2010
I am trying to install linux kernel manually, for this I had compiled linux-2.6.36 with minimum drivers and features. Note that ext2, ext3, jffs file system support and sd ata_piix drivers are set as inbuilt kernel modules.
I had two hard disk for my Intel x86 box sda and sdb. I have running linux on sdb from which I can access sda. sda has one partition sda1 as ext3 fs.
I had created following directories at sda1 root, bin, boot, etc, sbin
After compiling kernel, I had copied bzImage, system map files to boot folder. then using 'grub-install' I had installed grub on sda. after installation I edited grub.conf to setup kernel image.
grub.conf
Code:
After this I booted sda by changing HDD boot priorities,And wow I got grub prompt -- linux kernel booted but as soon as it tries to mount file system it dies with error,
Code:
I accept that I dont have binaries for init and no initialization stuff in /etc, but I think problem is I am not able to give correct rootfs to kernel.
View 3 Replies
View Related
Jul 10, 2015
I'm on stretch and have faced system crashes multiple times during the boot, when my system was hibernating.
How may I get to the cause of this issue and how could I correctly report it?
View 4 Replies
View Related
Sep 29, 2010
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
View 6 Replies
View Related
Jun 17, 2010
I am getting following problem while booting my PC.
Ide: failed upcode was: *unknown
* * * * *end_request: I/O error, dev had, sector 39010373
* * * * *hda: drive not ready for command
I am using FC6. Please let me know, what is the reason of this problem?
View 1 Replies
View Related
Jul 22, 2010
Booting up fails with code 126. I am greeted with the following error everyime I start up.
Checking root file system.../etc/rcS.d/S10checkroot.sh: line 174: /sbin/logsave: Permission denied
failed (code 126).
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
View 1 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Apr 4, 2010
I am almost brand new user of Ubuntu 9.10 loaded using Wubi. After an update I can no longer boot from the highest version (-20-generic), but have to start from a previous version (-14-generic). How do I clean up the boot image/configure grub (v 1.97 beta which I believe is Grub 2)?
View 2 Replies
View Related
Apr 24, 2010
So I got Ubuntu 9.10 on my laptop working really neat and wanted to upgrade my desktop to 9.10 as well. So I reinstalled Ubuntu there and now I can't connect to my network anymore....
I have a usb wireless adapter (currently Sitecom as I bought a new one today to hopefully fix it, but ended up at exactly the same problem as with my old adapter). The network manager I'm using now is Wicd since some topics I was looking through were about malfunctioning GNOME network-manager (which I removed) and suggested to try this. The GNOME network-manager kept prompting to insert my WEP network key which was a correct one. When I removed all security from the network it didn't prompt anything anymore but just failed to connect. The Wicd network manager is so nice to tell me that it cannot obtain the IP address however, so I suspect that this is my main issue... but I have no idea what I can do about this? Tried using a static IP and then I get the message "Connection failed: Could not contact the wireless access point."
I feel powerless as my knowledge here is just lacking..
View 4 Replies
View Related
Jul 9, 2010
I recently tried to upgrade to 10.04 but during the upgrade my powerpack failed. Now 10.04 has been installed but I cannot access Synaptic through the drop down menu it says "Unable to get an exclusive lock". I've tried accessing it through Terminal which works but then the only option I have is to Partial Upgrade but then that freezes at the first stage saying the old database can't access the new (or something along those lines) then that screen just remains there. Also when I minimise any windows I have open they don't appear at the bottom of the screen I have to go to multi screen to find them.
View 3 Replies
View Related
Feb 1, 2011
I have just run a fresh install of Kubuntu on an old PC to try it out for a few weeks. The Boot CD works fine and there is a GUI for the install. It seems to detect all the devices without a hitch. But when the PC reboots it boots into command line. When I try to run startx it gives me "AddScreen/ScreenInit failed for driver 0"I looked up the x.org website and in the FAQ Here it says "This kind of problem typically occurs when you're using a big monitor with an old graphics card. You can solve it by deleting some of the highest resolutions of the deepest colour mode in the Screen section of your xorg.conf, or even the whole last Display subsection."I am using an old pc with old graphics card with a 25inch HP LP2465 monitor. in my /etc/X11 there is only a xorg.cof.failsafe file. anyone any ideas on how to do this. The full error is attached in a very bad screenshot.
View 2 Replies
View Related
May 14, 2011
Ok, so a few weeks back my 6 year old daughter wanted to scan a picture she had made for a school project, I hadn't used my AGFA snapscan e20 for years, Infact it had been in a box for more than 5 years.
anyhoo I thought I'd give it a go and with some doubt plugged it in. Much to my joy and my daughters joy it just worked, there was life in the old dog still So two or three weeks on after I've installed a kernel update as well as others on my daughters Dell Optiplex GX620 Ubuntu 10.04 LTS (2.6.32-30-generic #59-Ubuntu SMP), my multi operating system literate 6 year old has drawn another master piece and popped it in the scanner only to recive the following error from simple-scan
What I'd like to know is,
1, How do I remove the entry for the scanner in simple-scan (ahh the old reinstall never fails)
2, why am I getting nothing back from my tail
3,Why did it break in the first place?
4, how to fix it (if not with a reinstall)
Please help as I don't want to break the "My Dad can fix anything" illusion my daughter has just yet.
View 8 Replies
View Related
Jun 12, 2010
I switch on the PC and it loads the Grub splash screen. However, it does not automatically boot the top entry after two seconds as it's supposed to and just hangs. I hit enter to boot it and it attempts to but after a few seconds gives me the error "unable to mount file system....a maintenance shell will be started"
This occurred after I was using it and then everything suddenly froze up on me and I had to crash out Now this!
View 6 Replies
View Related
May 25, 2010
I wanted to try out the new Ubuntu 10.04, but since I don't have any CD's available I thought I could use my 9.10 CD and upgrade from it.
1. Installed 9.10 on the entire disk.
2. Went to update manager(?) and clicked the button to upgrade to 10.04
3. It successfully downloaded all the files.
4. When installing the new files it suddenly said that it failed to update, and it stopped. Then I went to do a hardware test, but none of the menus were working.
I had to do a manual shutdown, and reboot the computer. This time I was met with an error "Unable to mount root fs".
I figured the upgrade was the problem, so I reinstalled 9.10 to try without upgrading.
1. Reinstalled 9.10 on the entire disk.
2. Went to update manager(?) and started the normal update for 9.10 so the system would be up-to-date.
3. Same thing happened now, it fails to update and it makes my computer useless.
I've already checked my hardware for errors, can't find any. I've checked the CD for errors, can't find any. I had 9.04 on the same computer a few weeks ago, and it was rock-solid. Worked like a dream. I'm using Win7 now though.
View 4 Replies
View Related
Feb 18, 2011
[code]...
What should be done in this situation? Shall I tell Ubuntu to use another server? If yes, how?
View 3 Replies
View Related
Jan 26, 2010
I seem to be having real difficulty downgrading my Wicd as I keep getting "Connection Failed: Unable to Get IP Address", and after having the trouble in another laptop (Ubuntu Mint) with the same problem...oddly enough the solution (other than buying another router) was to downgrade the wicd. butttt.... Now I not able to uninstall Wicd and therefore can't install the downgraded rpm file.Below is the error when trying to delete Wicd 1.7.0.2/ On another note,,, is there an easier one stop search for available software?, One that doesn't require an intimate knowledge of repositor
Error
Subprocess failed. Error: RPM failed: /var/tmp/rpm-tmp.T9VAvE: line 1: /usr/share/rpm-helper/del-service: No such file or directory
/var/tmp/rpm-tmp.T9VAvE: line 2: /usr/share/rpm-helper/add-service: No such file or directory
/var/tmp/rpm-tmp.T9VAvE: line 3: /usr/share/rpm-helper/add-service: No such file or directory
error: %preun(wicd-1.7.0-1mdv2010.1.x86_64) scriptlet failed, exit status 127
View 1 Replies
View Related
Nov 21, 2010
I want to install my printers onto this laptop. Both (2 laserjets-named "hplj2200" and "BrotherHL3040color")are "locally connected" via USB to a PC in another room (winxp pro) windows network is "workgroup" PC with printers attached is "philmainpc". Places>Network instantly sees WINDOWS NETWORK, click > WORKGROUP click> opening network> Unable to mount location Failed to retrieve share list. System>Admni>Printing>ADD>Network Printer>Windows Printer via Samba>Browse> workgroup philmainpc Doubleclick, wait for awhile and then nothing. I have tried manually typing in smb box "workgroup/philmainpc/"shared name of printer" and again nothing. In synaptic manager I added smbfs etc.
View 7 Replies
View Related
Aug 2, 2010
I have a Windows Home Server and would like to put it into hibernation from my laptop running Ubuntu. Is this possible through SSH or a program?
View 2 Replies
View Related
Jul 23, 2011
I didn't know where to post it exactly. You can see the Screenshot at the Tab bar, and it's not the only thing that bugs.. Many things and pictures disturb like this, from Desktop wallpaper and files and folders, to text and pictures.
View 3 Replies
View Related
Jan 28, 2010
Environment: A 32-bit kernel RHEL5.3 system running on a virtual machine. The root(/) filesystem is on an LV.
Issue: Unable to resize the FS after extending the root LV since it is mounted. After extending the LV, online resizing of the FS was not supported and the root filesystem could not be unmounted while it was in use. On rebooting, I got a kernel panic error. In runlevel 1, I couldn't run chroot, couldn't find the /etc/fstab, root FS could not be mounted, fsck did not run (tried block 31 for second copy of superblock using dd count=1 bs=4k skip=31 seek=1 if=/dev/sda2 of=/dev/sda2), couldn't find any rpm on installation media to install unix-utils rpm. On running commands in runlevel 1,
I got the following output.
View 5 Replies
View Related
Nov 19, 2010
rpm -ivh httpd-2.0.59-1.i386.rpm warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27 error: Failed dependencies:
libapr-0.so.0 is needed by httpd-2.0.59-1.i386
libaprutil-0.so.0 is needed by httpd-2.0.59-1.i386
libcrypto.so.4 is needed by httpd-2.0.59-1.i386
liblber-2.2.so.7 is needed by httpd-2.0.59-1.i386
libldap-2.2.so.7 is needed by httpd-2.0.59-1.i386
libssl.so.4 is needed by httpd-2.0.59-1.i386
[root@ganesh apache]# warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27 -bash: warning:: command not found
View 7 Replies
View Related
Nov 12, 2010
I was trying to install winbind on a RHEL5 machine and I had to reboot the RHEL machine. When it came back up, I'm not able to log in as root or any other user.When I use root and give a random password, it says invalid username or password but when I use the correct password, I get an Authentication failed pop up box (under GUI). SSh window says invalid password for random passwords and the SSH window disappears when I type in the right password.Can you please let me know if I can somehow get back in by stopping any of the services
View 3 Replies
View Related
Jun 14, 2011
I'm unable to ftp from one server to another server.
Getting the below error:
put: Access failed: 553 Could not create file
ftp script :
USER="test"
PASSWD="test"
HOST="10.43.45.00"
echo "starting Secure FTP ..."
lftp -u ${USER},${PASSWD} ftp://${HOST} <<eof
cd /home
lcd /home
put /home/test3.csv
bye
eof
echo "I have get all csv files
View 2 Replies
View Related
