I am getting following problem while booting my PC.
Ide: failed upcode was: *unknown
* * * * *end_request: I/O error, dev had, sector 39010373
* * * * *hda: drive not ready for command
I am using FC6. Please let me know, what is the reason of this problem?
I recently installed Kubuntu 10.04 Lucid Lynx Desktop 64-bit edition. The install worked and I was able to restart the machine no problems. Last week (5/27/10) I shut down my machine and since then I cannot boot. I assume it's because of new software maybe a new kernel; I did an "apt-get update; apt-get upgrade" on May 28th or 27th. Upon booting if I hit Esc right away I see:
(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
[About 5 minutes passes then this next line prints]
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) [this is some kind of shell...who can't see my harddrive]
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I am using Ubuntu 10.04 and am having a major issue with it not booting. My PC worked fine yesterday but when I tried to boot this morning I get the error "error: unknown filesystem" and under that I get the "grub rescue>" prompt.
At first I thought this was just a problem with Grub that would be easy fixed so I put in my Ubuntu USB and loaded it up in live mode. But when I try to look at my file system from within the live environment I can't seem to see any of my files.
I have looked at the drive in GParted and my main file system (/dev/sda1) shows up as 'unknown', while the swap partition (/dev/sda5) shows up as it should. I have also looked at the drive with the Disk Utility and the SMART Status says the disk is healthy.
I am really concerned about this as currently the system is totally unable to load, not only that but I am also unable to recover my data from the drive which is my main concern as I havent done a backup for quite some time and I have a lot of python code that I have been working on that I really need to get back.
Has anyone got any idea of what to do and how I might be able to sort this out or at the very least recover all my data. I can't understand why this has happened I have not made any changes to the system recently other than installing the updates that came through yesterday. This is a really urgent issue for me and any help will be very appreciated.
I'm running Debian testing and after a recent software update, suddenly I can no longer boot into my single Linux kernel image anymore. I did look at the software update before I did it and I don't believe that it removed any software packages. When I try to boot into my linux 2.6.26-1-amd64 image, I get the following message from grub:"error: unknown command `initrd'"..The same error appears if I try to boot into single-user mode. I have a Windows XP partition on the same hard disk and I am still able to boot into that from grub. I've searched the net and haven't really found my same problem replicated anywhere. I would imagine that the problem is just that somehow the initrd package got removed in my last software update, but again I don't recall seeing any software that the update planned to remove.
Any thoughts on how I would go about fixing this problem? Since I'm unable to get into Linux at all, I imagine I'll have to use a LiveCD to get in and fix the problem, but I don't know where to begin looking.
I have an ongoing issue that I've not been able to troubleshoot. Upon bootup I get the following text and error, and it stops. ACPI: Aborted because bad gzip magic numbers MP-BIOS bug: 8254 timer not connected to IO-APIC Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0)
View 2 Replies View RelatedI'm getting strange error after the splash screen in lucid
(process:290):GLib-Warning**:getpwid_r():failed due to unknown user id(0)
(process:315):GLib-Warning**:getpwid_r():failed due to unknown user id(0)
after this error the screen just hangs.
I apologize in advance.. I searched and there is way too much information on this board and wasnt sure what was applicable to my case. I suspect that I prematurely closed the lid on my netbook last night when shutting down...my wife heard beeping noises early this morning but wasnt sure where they came from. I think it was the netbook forcing shutdown from hibernation due to low batteries.
Computer wouldnt boot this morning and I get the following error code...
I started installing the beta of Maverick a few days ago, but the update server was running inordinately slow, so I canceled it. Several times, I have attempted to continue the installation, but I've been unable to reach the server. Shortly after this happened, I could no longer boot normally--I get the error:
Code: Kernel Panic - not syncing:VFS:Unable to mount root fs on unknown-block(0,0) Choosing the previous kernel fixes the problem.
So, I obviously want to upgrade to the release version now. When I open the update manager, I get asked if I want to do a partial upgrade to complete the install. I'm a bit leery of doing this since I only have one previous kernel to go back to (my list got really long and I have another operating system entry underneath, so I set my automagic boot manager to only keep two), and if I can no longer boot after the upgrade, I'll have to use Windows until it gets fixed... So, should I finish the upgrade, try to troubleshoot the error, or do something else to jump right to the latest release, after being partway through the upgrade?
I am trying to install linux kernel manually, for this I had compiled linux-2.6.36 with minimum drivers and features. Note that ext2, ext3, jffs file system support and sd ata_piix drivers are set as inbuilt kernel modules.
I had two hard disk for my Intel x86 box sda and sdb. I have running linux on sdb from which I can access sda. sda has one partition sda1 as ext3 fs.
I had created following directories at sda1 root, bin, boot, etc, sbin
After compiling kernel, I had copied bzImage, system map files to boot folder. then using 'grub-install' I had installed grub on sda. after installation I edited grub.conf to setup kernel image.
grub.conf
Code:
After this I booted sda by changing HDD boot priorities,And wow I got grub prompt -- linux kernel booted but as soon as it tries to mount file system it dies with error,
Code:
I accept that I dont have binaries for init and no initialization stuff in /etc, but I think problem is I am not able to give correct rootfs to kernel.
After upgrading from 10.04 to 10.10 I have had some problems booting my Ubuntu. It all started when restarting after the upgrade, and I got the error;
Code:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting / sys/ on root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or dirctory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= boot arg
BusyBox v1.13.3 (Ubuntu 1:1.13.3.1ubuntu11) built-in shell (ash)(initramfs) After searching the Internet, I found a "solution". I just had to boot with a USB stick with the Ubuntu Rescue Remix (the normal Ubuntu USB won't boot either), and i wrote;
Code:
sudo fsck /dev/sdb5
Now I could start my Ubuntu again. So whats the problem? If I turn off my computer the normal way, there is no problem, but if I log off, put it into sleep mode, if something happens and I have to turn it off with the button it goes back to the first problem, and I have to reboot it with the USB stick and fix it all over again! If I don't have the USB stick with me, I probably wont be able to use my laptop!
Whenever I try to install Xubuntu onto my really old computer (not this one), it goes to a screen that shows nothing except the Xubuntu logo and the name. After a bit, my monitor falls asleep, and I am unable to wake it back up.If I press enter while at this screen, it brings up the error message in the title. The same thing happens with all the options I try to press.
View 1 Replies View Relatedi have ubuntu 10.10 but now i have problem to access it so i boot from my live CD this what i get in checkcdfordefects.png when i select Try Ubuntu without any change to your computer that i get logo of ubuntu and take long time to load and not see desktop when press esc this error that i get GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
remark
in bootf4.png
F4.mode
i don't have option safe Graphics Modes i need to acess Try Ubuntu but i don't know what problem?
I'm running an up-to-date Lucid Lynx, full encryption with LUKS on my Eee 1005HA. Since yesterday, after booting, the only "X" is can see is the mouse cursor above a console-like text, saying:
Code:
(process_290) GLib-WARNING **: getpwuid_(): failed due to unknown user id (0)
init: ureadahead main process (410) terminated with status 5
fsck [clean, blah bla, check deferred, on battery]
[code]....
So, I googled for the getpwuid_r thing. I found a blog saying to install nscd (did so) and run it. But: To my inconvenience, after every booting, I have to switch to console 1, log in, run "sudo /etc/init.d/nscd restart" and then "sudo restart gdm".
i have tried going through this old post but its still not working ... tried googling but i do not seem to find any conclusive solution for this. [URL]i am getting this error during boot time:
Apr 23 15:43:57 ftp kernel: hda: status timeout: status=0xd0 { Busy }
Apr 23 15:43:57 ftp kernel: ide: failed opcode was: unknown
Apr 23 15:43:57 ftp kernel: hda: no DRQ after issuing MULTWRITE_EXT
Apr 23 15:43:57 ftp kernel: ide0: reset: success
there is no immediate effect due to this but after sometime the HDD goes in read-only mode. have tried changing bios setting from IDE to AHCI, did a disk check using hiren boot disk which did not give any errors.even now the error still persists. Linux 2.6.18-164.el5PAE #1 SMP Thu Sep 3 04:10:44 EDT 2009 i686 i686 i386 GNU/Linux CentOS release 5.4 (Final) i know i should probably upgrade my kernel but i see people with latest kernel also facing the same issue (mostly with samsung hdd but mine is seagate)
hdparm -I /dev/hda ------------
/dev/hda:
ATA device, with non-removable media
Model Number: ST380215AS
Serial Number: 6QZ6ENV1
[code]...
Currently running 10.04. Just did some updates and when it finished rebooting it just doesn't work right. Whenever I click on my user name to enter my password it freezes for 3-5 seconds then the screen reloads. If I do Ctrl+Alt+F7 I get this error(the title of the thread). I have no earthly idea what this means but everything was working great until I did my updates just a couple hours ago. on??
View 9 Replies View RelatedI want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
I have download file from this site and have done these steps [URL].
tar -xvf ntfsprogs-2.0.0.tar.gz
chown root.root -R ntfsprogs-2.0.0
cd ntfsprogs-2.0.0
./configure
make && make install
Still I have failed to mount ntfs partition with this command..
mount -t ntfs /dev/hda1 /mnt
or
ntfs-3g /dev/hda1 /mnt
The error is .................
mount: unknown filesystem type 'ntfs'
I am using RHEL5.4 and kernel is 2.6.18-164.el5
Installing 10.10 from disk, at some point during installation an error occurs and this appears:
(process:426): GLib-WARNING** getpwuid_r(): failed do to unknown userid (0)
Failed login attempts are logged to syslog with the user id or login id set to UNKNOWN_USER or UNSET.Anybody know if this is configurable. I would rather it just pass the actual id that the user used. Doesn't matter if it exist or not, just want to know if someone is guessing at user names and what those user names are
View 1 Replies View RelatedI just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
I am working with linux special edition LXFS Installed everything from the disk, works all fine but sometimes Linux shuts down suddenly and the following message appeals on a black screen. ' (proces 271) GLIB - warning getpwuid_r() : failed due to unknown uster id co) ' When I restart the computer everything is OK again. but than later it happens again.
View 1 Replies View Related"(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)"
It comes after choosing language, when the Ubuntu start-up logo shows with the 5 dut under it. I am trying to install Ubuntu Netbook on a little Compaq Mini.
When i try to install Ubuntu 11.04 or try without installing i get graphics like this:[URL] same with older versions, and on older versions i used to get this error: (process:257):GLib-Warning**:getpwuid_r():failed due to unknown user id(0) but on new version it dosent appear. My graphics card is: GeForce 7600GT MSI.
View 3 Replies View RelatedI am trying to install RHEL 4 AS update 4, bootin from sata CD drive it is giving error Kernal panic-not syncing VFS- unable to mount root fs on unknown-block (9,1)
View 1 Replies View RelatedI installed a update on a driver now i cant boot ubuntu. i select ubuntu,then ubuntu generic then i get this message. [ 1.772486] Kernel Panic -Not syncing :VFS: Unable to mount root FS on unknown Block (8,1)
View 9 Replies View Relatedthis issue which has suddenly occurred on both my Desktop and my Laptop. When I try to configure an IP address to any interface I get the following error....
uadmin@Ubuntu:~$ ifconfig br0 addr 192.168.10.1/24
addr: Unknown host
ifconfig: `--help' gives usage information.
uadmin@Ubuntu:~$
I get this for ethernet interfaces as well. I do not understand what is different as I was able to configure the ip address only the day before yesterday on the laptop..? The Desktop has had this issue for about 3 weeks now.
br0 Link encap:Ethernet HWaddr 32:70:40:91:06:25
inet6 addr: fe80::3070:40ff:fe91:625/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
i bought following server about some days ago :Supermicro X8DTi1u Super micro
2x 1TB Sata 2 i want install centos 5.5 64bit on it, i download centos 5.5 64bit from centos.org torrent link but when i want setup centos it says :kernel panic : not syncing : VFS: unable to mount root fs on unknown block(253,3)and also i set adptec raid in my bios and set raid 0 in adptec raid controller (my mainboard has onboard raid) i run any command you think like linux dd, linux all-generic-ide, linux noprobe, linux nostorage and etc but none of them does not work for ,e
When I boot up for Ubuntu 9.10, I get a screen that gives me a selection of what I assume are versions of Ubuntu 9.10.I get: Kernal Panic: not syncing: VFS: Unable to mount root fs on unknown-block(8,3) and the process stops. I have to turn off the computer and go back and select "2.6.31-15 generic"What is going on and what do I need to do to get back to 17 generic version?
View 5 Replies View RelatedI have a wind river linux installed on a IDE disk, whenever i boot it, it says:
The menu.lst file looks like this:
I want to install new kernel of wind river linux, i tried to mount usb disk but it is not working.