Ubuntu :: 10.04 Upgrade Failed - Unable To Get Exclusive Lock
Jul 9, 2010
I recently tried to upgrade to 10.04 but during the upgrade my powerpack failed. Now 10.04 has been installed but I cannot access Synaptic through the drop down menu it says "Unable to get an exclusive lock". I've tried accessing it through Terminal which works but then the only option I have is to Partial Upgrade but then that freezes at the first stage saying the old database can't access the new (or something along those lines) then that screen just remains there. Also when I minimise any windows I have open they don't appear at the bottom of the screen I have to go to multi screen to find them.
View 3 Replies
ADVERTISEMENT
May 25, 2010
i have consistently had one problem since i started using ubuntu a couple of days ago, when i try to install or update anything i get the error message 'unable to get exclusive lock'. It says that this probobally means that another software management program is running however using system monitor none are apparent. I am currently trying to use the update manager however i was having the same problem while installing flash player yesterday.
View 6 Replies
View Related
May 7, 2010
I know its been a few years since this post was made but, im having the same problem as guts and glory. So i did the things you said and it still says "status database area is locked by another process"
After i wrote 'sudo apt-get clean all' it didnt say anything but /home/user/
All i want to do is to enable desktop mode. So i can then install programs like vlc media player for watching movies
Edit:
ok i don't know where the rest of the post went?! So when i type in 'sudo synaptic' i get a error saying "Unable to get exclusive lock - This usually means that another package management application (like apt-get or aptitude) already running. Please close that application first."
And when i type "sudo dpkg --configure -a" i get "dpkg: status database area is locked by another process"
View 9 Replies
View Related
Jan 15, 2010
" p, li { white-space: pre-wrap; }Cannot get the exclusive lock on the packaging backend. Please close any other legacy packaging tools that may be open." I cannot update anything, and I haven't opened another package downloader. The only one open is KpackageKit. Please help, is this a big or have a I got a virus or something? I don't know what information is needed so if I need to expand tell me what I need to retrieve and ill post it.I'm not good with Kubuntu problems.
View 2 Replies
View Related
May 9, 2011
i tried to remove urbanterror with
Code:
pacman -R urbanterror
and there was an error that said
Code:
error: failed to init transaction(unable to lock database)if you're sure a package manager is not already running, you can remove /var/lib/pacman/db.lck and there was the same error when i try to install a package. I recently did a full system update could that be the problem?
View 5 Replies
View Related
Nov 21, 2009
Quote:
I've upgraded to fedora12 from fedora11 using preupgrade.
The process was successfull till the first boot, where I got above error message.
View 1 Replies
View Related
Apr 1, 2011
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
View 9 Replies
View Related
Jun 10, 2011
Failed to lock package manager Every time I try to bring in SW from USC, I keep getting the above. Starting to be a pain.
View 6 Replies
View Related
May 25, 2010
I'm trying to lock an account after a number of failed login attempts in a RHEL5.
This is the relevant configuration in /etc/pam.d/system-auth
In the logs I can see how the count of failed logins increase and exceeds my deny option but the account isn't locked
Do I need any other option in the PAM file? Is there any other way to lock an account?
View 5 Replies
View Related
Oct 16, 2009
Code:
I found another thread similar to my question here: http://www.linuxquestions.org/questi...-issue-535818/
But I don't understand what the solution is. I believe this has something to do with the permissions on the directory im trying to check out so I did chmod 777 on subdirectory in /cvs(my cvsroot directory) and I was able to checkout subdirectory afterwards, but I still get the same error.
View 1 Replies
View Related
Aug 11, 2011
after getting my keyboard and mouse working (URL... not even when I was compiling kernels from floppies that came in the back of books did I have to work so hard to get the KEYBOARD working, sheesh), I have a mostly working system.However, Lock Screen does not work in any way, shape or form:
- It doesn't work via the keyboard shortcut Ctrl+Alt+L
- It doesn't work if I select it from the Power button on the upper-right
- It doesn't work if I press the Power button to suspend (even though all the correct things are ticked/unticked in gconf-editor)
- It doesn't work if I switch users and back
Now, I do have a laptop running 11.04 and its Lock Screen *does* work. The only difference I can find is that the laptop says gdm is running screensaver.If it shouldn't be running, why else might Lock Screen not be working?
View 2 Replies
View Related
Apr 20, 2011
I only have shell access to one of my boxes so I need to know how I can I stop a package from being upgraded from the terminal.
View 3 Replies
View Related
May 16, 2010
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies
View Related
Nov 3, 2010
Running Landmarq Intel Atom DC330 Desktop I have just attempted to upgrade my desktop machine from Kubuntu 10.04 to Kubuntu 10.10. I used KpackageKit to do the upgrade which proceeded smoothly until the install packages phase, which seemed to complete and then repeat. I don't know the detail of what happened as I was out of the room.
The repeat almost completed, but then I got a set of error messages, which basically told me that KpackageKit was unable to install the upgraded packages. I closed KpackageKit, and closed the machine and tried a reboot. This time, I got as far as the splash screen, but although the cursor flashes, I can't type anything in the password box. In addition, the mouse pointer won't move. Using a different wireless mouse works, but I still can't type in a password.
However, the command ctrl+alt+sysrq+RSEIUB works, so the machine is accepting some keyboard input. I also know from using a live disc that my home directory is intact. I would like to revert to my 10.04 installation, and re-try an upgrade to 10.11 afterwards.
View 3 Replies
View Related
Jan 11, 2011
So I was trying to run this: sudo apt-get update && sudo apt-get upgrade.But then it stopped working in the terminal, so i got this:E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?So then I ran this: sudo fuser -cuk /var/lib/dpkg/lock; sudo rm -f /var/lib/dpkg/lock..Which blanked my screen. I booted to a terminal and I ran apt-get update and apt-get upgrade.All my files are there, I ran -ls. Any advice as to how to log on graphically again?Also-when I turn on the computer, it says the screen graphics card and the like were not detected properly.
View 1 Replies
View Related
Mar 21, 2011
On my freshly installed 64bit ubuntu i keep getting this error:
Unable to lock the administration directory (/var/lib/dpkg/)
whats going on?
View 3 Replies
View Related
Feb 25, 2010
I am currently new to ubuntu. I would like to install jdk 6 in ubuntu. I've tried to install using this command: sudo apt-get instal. But in the end, I only got this result:
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
I've tried many times and still it doesn't works.
View 4 Replies
View Related
Jan 23, 2011
red minus sign next to internet and following states..... E: Type 'cat' is not known on line 45 in source list /etc/apt/sources.list E: Unable to lock the list directory
View 4 Replies
View Related
Aug 10, 2011
Unable to lock directory /var/cache/apt/archives/
Whenever I use sudo apt-get to install my apps in the terminal this pops up when its almost done downloading.
View 3 Replies
View Related
Aug 8, 2011
I'm using Fedora 15 with Gnome 3 on my laptop. I don't restart the system unless there's an update that requires me to, preferring to use the Suspend feature instead. However, I noticed that after an uptime of a few days, the screen doesn't lock anymore. Neither the shortcut 'Ctrl+Alt+L', nor the terminal command 'gnome-screensaver-command --lock' seem to work. I'm sure restarting the system will enable me to lock again, but I don't think I should restart just to get this feature back.
Does anyone know why this happens? Is there some other way to lock the screen?
View 1 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Jan 20, 2010
On my windows console, i have installed sun virtualbox. I only have 768MB ram and so i downloaded a trial version of eboostr. I thought it would work, but when i tried an install of 11.2, also, i tried a debian install, it did the same thing, it froze up in the middle of the install with the error Code: unable to allocate and lock memory. I guess that eboostr doesn't work, but is there a way to use a flash drive as ram in virtual box?
View 5 Replies
View Related
Mar 25, 2010
When i connect windows server 2003 from ubuntu these error displayed .When i installing the tsclient, by executing these following command from a Terminal window:
sudo apt-get install tsclient
When i run these command the following error displayed.
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
View 1 Replies
View Related
Sep 14, 2010
I have a HP Pavilion dv4 that is 4 months old. Yesterday it suddenly seemed to restart then once I logged in it turned off. When I tried to turn it on some of the lights came on and the caps lock and num lock started flashing. Since then I have not been able to get it to work correctly.It once seemed to turn on but died again after the login window.I tried to use my live cd but the same thing happened. It started loading once, but then shut down again. Every other time it stayed dead minus the lights
View 1 Replies
View Related
Jun 12, 2011
I recently installed Ubuntu 11.04 on an old Sony Vaio laptop. I was following some of the steps here..[url]
The step "Enable Full DVD Playback(Dual Layer DVD Support)" did not finish correctly doh and now I can't use 'sudo apt-get' for anything or the software center or using the 'Update Manager' does not work.
The update manger says it may be caused by an update not finishing correctly which sounds correct as explained above. The apt-get command gives me back the following....'Could not get lock /var/lib/dpkg/lock resource temporarily unavailable' 'unable to lock administration directory /var/lib/dpkg is another process using it?'
I tried the obvious restart but that hasn't worked.
View 6 Replies
View Related
Feb 25, 2010
my problem is the terminal:
E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)
E: Unable to lock the administration directory (/var/lib/dpkg/) , are you root?
View 2 Replies
View Related
Apr 3, 2010
I have pidgin2.5.2. I want to install pidgin2.6.6.How can I do that?E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
View 1 Replies
View Related
May 2, 2010
There is a very strange problem I've been having. When I enable either Caps Lock or Num Lock the media controls on my keyboard cease to work. I have Googled this one to death but found nothing. This problem existed in Xubuntu 9.10 and now still exists in Xubuntu 10.04. The keyboard I use is a Logitech Elite Keyboard. I would love to be able to use the Caps Lock and Num Lock without the worry that I am disabling the media controls
View 4 Replies
View Related
May 27, 2010
I have just burned the latest CD using infraRecorder, as per the instructions on this site, however when I boot from this CD, it spends about 5 minutes moving the red balls across my screen, then all of the sudden it just freezes, and my caps and scroll lock lights start to blink. I've had a look in the forums already but there's nothing about this happening on Boot of the live CD.
View 6 Replies
View Related
Jun 23, 2010
I'm wondering why the num lock doesn't work in Ubuntu anymore? When you press the "num lock" key, you're supposed to be able to input the numbers along with + - * / and decimal point. When I press num lock and try typing numbers, nothing happens.
I've done a google search and this is a well known problem that nobody has fixed. In Windows it's never a problem.
Seems such a shame that the great Ubuntu and Linux are so good for stability and speed, but can't get a simple num lock working.
View 9 Replies
View Related
