Ubuntu :: Unable To Resume From Hibernation
Sep 8, 2010
I'm having trouble resuming from hibernation. The splash screen loads up with "Resuming from /dev/sda6" (this is the correct partition) and the HDD light shows it's reading the drive. It then stops reading and the loading animation starts up (I'm running Lucid). Then nothing, just the animation. I recently updated initramfs-tools to 0.98ubuntu2~lucid as hibernation wouldn't work at all with the old version (see [URL]). I've also installed this script because of errors on hibernation.
I've posted the output from recovery mode after hibernation below:
Begin: Loading essential drivers ... done
Begin: Running /scripts/init-premount ... done
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done
Begin: Running /scripts/local-premount ... [ 3.280440] PM: Starting manual resume from disk
[3.281560] Freezing user space processes ... (elapsed 0.00 seconds) done.
[3.281898] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[3.306778] PM: Loading image data pages (126908 pages) ... done
[11.121294] PM: Read 444708 kbytes in 6.96 seconds (63.89 MB/s)
[11.121388] Suspending console(s) (use no_console_suspend to debug)
[11.121606] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[11.123474] pm_op(): usb_dev_freeze+0x0/0x20 returns -2
[11.123477] PM: Device usb8 failed to quiesce: error -2
[11.123707] PM: Restore failed, recovering.
[11.149854] Restarting tasks ... done.
View 2 Replies
ADVERTISEMENT
Jun 25, 2010
I am using uswsusp / s2disk and it hibernates fine. Then, on resume, it apparently completes the resume (reaches 100%) but it never progresses to the actual resumed system and gets stuck on this screen: Before upgrading from 9.04 to 10.04 it worked fine. It does not anymore.
View 1 Replies
View Related
Aug 13, 2011
Is there a way to put Linux in hibernation, then reboot and resume when it boots back?
This would be amazing in combination with dual booting.
View 1 Replies
View Related
Jan 15, 2010
i am trying to write a script that switches the system to hibernation automatically at a particular time and again wakeup after some fixed amount of time. I found that at /etc/acpi there is a hibernate.sh but i cudn't find resume.sh .
View 3 Replies
View Related
Jun 19, 2009
My laptop beeps three times during the resume from hibernation. How can I disable this beeping. I use CentOS 5.3. Interestingly, this issue did not occur when I used CentOS 5.2 on the same laptop last year.
View 6 Replies
View Related
Mar 21, 2009
For the sake of security, I want the screen to be locked after the system is resumed from suspend or hibernation. Now the only way I can do this is to check the options "Lock screen when screen saver is active." in the screensaver preference. But this method is annoying since I have to type the password to quit the screensaver. Is there other way to do this? Thanks.
By the way, I use CentOS 5.2 x86_64.
Leonard
2009-3-21
View 1 Replies
View Related
Jul 1, 2010
Running Opensuse 11.1 on an HP laptop. When I resume from hibernation or standby, I usually have to wait for about a minute for the wireless card to find my router. Is there any way to speed up this time to connect process ?
Interestingly when I boot from cold, the wireless connection is most times ready to go as soon as the boot has finished. So just wondering how I can make things quicker for resume from standby or hibernation
View 4 Replies
View Related
Feb 16, 2010
I apologize in advance.. I searched and there is way too much information on this board and wasnt sure what was applicable to my case. I suspect that I prematurely closed the lid on my netbook last night when shutting down...my wife heard beeping noises early this morning but wasnt sure where they came from. I think it was the netbook forcing shutdown from hibernation due to low batteries.
Computer wouldnt boot this morning and I get the following error code...
View 2 Replies
View Related
May 2, 2010
Have been using Ubuntu 9.10 since past 2 months and had similar power and screen saver options as I do now after upgrading to 10.04. ( "sleep" after 1 h, "lock screen" after 10 min, "hibernate" when "close lid" on a Dell 600m laptop)
With Karmic, Never had issues with closing the lid while the laptop was sleeping. Three times in a row noticed that if the lid is closed while laptop is in sleep mode, opening the lid results in a blank screen, HDD and CD drive spins, fan turns on. No response to keyboard and/or mouse. Pressing the power key: no response.
The only solution is to shut-down by holding the power key down for a few seconds and reboot. Cant imagine why there would be a problem, but wondering if there are others who also see the same thing and if there is fix to this. Right now, have disabled sleep and will see if problem shows up.
View 9 Replies
View Related
Aug 10, 2009
I am having a problem reconnecting to the internet when I put my computer in suspend or hibernate. For some reason when I put my computer in any one of these modes it disconnects from the internet, and I have no way of getting back on the internet after that. I use to have the option of "Enable Networking" on my top panel, but it seems to have disappeared for some reason. Is there any way to stay permanately connected to the internet, even when it is in hibernate mode, or could someone tell me how to get the enable networking icon back?
View 14 Replies
View Related
Mar 18, 2010
How do you actually remove and install kernel when the system is not booting.
View 4 Replies
View Related
Mar 7, 2011
I'm running CentOS 5.5 with a hardware Areca controller (Raid 10). I initially installed a machine and rsynced the file system to a third machine; I'm then pulling in the file system to new machines and updating grub with a script to make it bootable.
I've done this before with other machines (no raid sets) but with these machines I'm running into errors code...
View 1 Replies
View Related
Sep 23, 2011
I face a problem with my server after i rebooted it i got a message on start up tell me that " Unable to access resume device (label=swap-sdb3) " and the system doesn't startup
the error message exactly is
Unable to access resume device (lable=swap-sdb3)
Creating root device.
Mounting root filesystem.
[ 3.305354] EXT-fs (md1) : error : unable to read superplock
mount: error mounting /dev/root on sysroot as ext3 : invalid argument
[Code]....
View 4 Replies
View Related
Jan 26, 2010
I'm trying to move an existing FC10 install (created by someone else) from a 160GB WD1600AAJS SATA disk to a 160GB WD1600AAJB PATA disk (cursed trend of horizontally mounting SATA connectors at the end of the motherboard means the latest rev mobo doesn't fit in our enclosure!). I've used DD to copy the disk image from one to the other, but when attempting to boot, I get the following error:
Code:
Unable to access resume device (UUID=946f216f-0c24-4b02-a996-f42059970de7)
mount: error mounting /dev/root on /sysroot as ext3: no such file or directory
That particular UUID maps to sda2, which is the swap partition. Interestingly, both the SATA and PATA disk come up as /dev/sda on the motherboard. I kind of grok that the UUIDs are substitutes for directly naming the disks, and that they're referred to in fstab, initrd-2.6.27.12-170.2.5.fc10.i686.img, and in /dev/disk/by-* I'm guessing the problem is that the GUIDs (at least the one for swap) are no longer the same. How are they assigned to the partitions during boot?
I tried doing
Code:
swapoff -a
mkswap /dev/sda2
swapon -a
and put that new GUID in fstab and into initrd-* (using some steps I found elsewhere on how to gunzip/rezip it).At that point, I get a kernel panic on boot
Code:
Kernel panic - not syncing: CFS: Unable to mount root fs on unknown-block(0,0)
So I'm guessing that the other UUUDs have changed as well and I need to update them. How would I figure out what they are? I suppose I could change the references to /dev/sda*, but I didn't build this original image and I'm thinking whoever did had a good reason to go with UUIDs.
View 10 Replies
View Related
Mar 7, 2010
I have FC6 system with kernel 2.6.22.14-72.fc6 When I rebooted my system, I got error message "unable to access resume device (LABEL=SWAP-sda8) then it went to fsck automatically to all the partition and then stop (failed)
Checking filesystems
/1:clean, 10543/2560864 files, 204494/2560359 blocks
fsck.ext3: unable to resolve 'LABEL=/backup'
/boot: clean, 155076/19546112 files, 13456168/39072080 blocks
[Code]...
View 14 Replies
View Related
Feb 2, 2009
I already know "what" my problem is, however I am having difficulty fixing it. I recently upgraded our companies server to a HP ML150; decided to upgrade to FC10 hoping it would go smooth and it is not. It does not detect the SATA drives after the installation.
I get.
"Volume Group "VOLGroup00" not found
Unable to access resume device (/dev/VolGroup00/LogVol01
mount: error mounting /dev/root on /sysroot as ext3: No such file or directory
I know the problem is that my SATA is not enabled in the kernel or grub, but I don't know how to fix this. My internet searches are coming up a little short and LIVE discs are not working so I am having trouble figuring this out.
View 3 Replies
View Related
Apr 8, 2009
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
View 2 Replies
View Related
Aug 2, 2010
I have a Windows Home Server and would like to put it into hibernation from my laptop running Ubuntu. Is this possible through SSH or a program?
View 2 Replies
View Related
Jul 23, 2011
I didn't know where to post it exactly. You can see the Screenshot at the Tab bar, and it's not the only thing that bugs.. Many things and pictures disturb like this, from Desktop wallpaper and files and folders, to text and pictures.
View 3 Replies
View Related
Mar 1, 2010
I'm running 9.10, how do I wake up from sleep or hibernation on my Dell XPS notebook? I have no problem putting the comp to sleep/hiber but can't seem to work out the keys to wake it up again.
I don't get any responses from the keys even when I try CAPS LOCK or NUM LOCK, so all I can do is reach for the on/off switch.
View 4 Replies
View Related
Apr 27, 2011
the title says it all, i am able to mouse my keyboard(i am using a laptop),and i can use my mouse if i plug in a portable mouse
View 1 Replies
View Related
Apr 28, 2011
ASUS P5Q Deluxe, Intel Core 2 Duo, GeForce 8800, 4GB RAM, USB keyboard and mouse never had problems with suspend and hibernation in Ubuntu. Until the latest version 10.10. Both before and after installing the proprietary Nvidia drivers, the system enters the sleep and hibernate but I can not wake up properly. Specifically, while it looks as it starts up, but not fires up the X server. Oddly - operate only CTRL + ALT + F1-12. You can switch to the text cosole, see the "incentive" to sign but other keys do not work and nothing can be entered. Not working CTRL + ALT + DEL as well, so you need to turn off the system power.
View 9 Replies
View Related
Aug 14, 2011
I am aware that Wubi does not support Hibernation, but does it support sleep mode? I use sleep very often in Windows and its a feature I love.
View 1 Replies
View Related
Feb 15, 2011
Ubuntu booting up from hibernation is not faster compared to complete start up. In windows, you can feel the boot-up is faster if you hibernate your PC earlier. But in ubuntu, i dont feel that, to boot up from hibernation, it takes quite long time, not faster than complete new start-up.
View 3 Replies
View Related
Jan 14, 2010
I would like to save the state of my windows. I use many of them at once for programming. With the hibernation mode, I can do that, it work. I want to know how can I do that if I completely shutdonw the computer.
View 8 Replies
View Related
Feb 21, 2010
This may be a noob question, but I can't find the option to set the computer to hibernate after a given idle time. In the Power options there is an option to suspend, but not to hibernate.
Is there other way to set the hibernation time?
View 1 Replies
View Related
Feb 23, 2010
Since I tested with suspending/hibernating my laptop, the system seems to have lost the swap partition. That is to say: it cannot find it at boot anymore. Some message shows during boot like "waiting for device listed in fstab: swap" or something and then it continues toboot normally. When I start the systemmonitor it reports Swap usage 0 byte out of 0 byte.
I checked my devices with
Code:
blkid
in terminal and it lists one of the partitions with its UUID as TYPE="swap".
Then I opened fstab with
Code:
sudo mousepad /etc/fstab
and noticed the line for the swap partition was using a completely different UUID. After changing the UUID to the correct (new) one and reactivatin swap with
Code:
sudo swapon -a
in terminal, all was well again but...
How could the UUID suddenly have changed? Did that indeed have something to do with trying (and failing) Suspend and Hibernate ? If so, should I stay away from those features (that served me well under Windows) or is there something to be done about it?
View 4 Replies
View Related
Jun 4, 2010
A few days ago, after I made some changes on my lucid system, hibernation is not possible any more, that is, if I choose hibernation, everything seems to go fine but at the next boot, the image is not read by the kernel and normal boot happens. Hibernation is very important to me, what can I do go get it back ?
View 3 Replies
View Related
Jul 12, 2010
Running 10.04 32bit. Is there a way to prevent hibernation from kicking in while a specific script is running?
View 1 Replies
View Related
Jul 12, 2010
I have a Microsoft LX-3000 USB headset that has been working fine for me on all of my Ubuntu machines... until today. I accidentally clicked on "Hibernate" instead of "Shut Down" on my Lucid laptop this morning, and something seemed a little off about the hibernation process, although I don't remember exactly what happened. Anyway, since I woke this machine up, I can't get sound out of the headset. I've plugged it into multiple USB ports and can still use the microphone and the volume controls just fine, but there's no output. (Yes, I've made sure the device is enabled for output in my sound preferences).
View 2 Replies
View Related
