Booting up fails with code 126. I am greeted with the following error everyime I start up.
Checking root file system.../etc/rcS.d/S10checkroot.sh: line 174: /sbin/logsave: Permission denied
failed (code 126).
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
My system has stopped to boot at all...
Code: Select alldone.
Setting parameters of disc: (none).
Setting preliminary keymap...done.
Activating swap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
[Code] ....
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!
The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance
(or type Control-D to continue): _
For now, I just don't know what I should to do next to my system has started to work again...
I have Debian Wheezy on my Dell Vostro 1710.
There is a fsck scan happening every 35 mounts on my laptop (i.e. when I boot)
It was fine until a few weeks ago when it started to fail.
Here is the error message :
What should I do to fix that ? I use my laptop to go on the Internet and I don't remember modifying/installing anything that could make this happen.
I found the answer : [URL] ....
I just had to type the root password and run fsck manually as follows : fsck /dev/sda7.
I have bunch of partitions on my Debian server installation, so I was experimenting with partitions and saw that is one partition fails fsck on booting time, system waits for root password or CTRL+D key combination. The problem is that my Debian machine is headless and I use only SSH to it. So if fsck fails, I can't to login to SSH (off course, because it is not loaded at this time). So I need to go with monitor and keyboard to machine and press CTRL+D.One option is to disable disk checking at startup by changing fstab file. I don't like this option. Is there any possibility to auto continue booting Debian machine ?
View 2 Replies View RelatedI have debian testing installed on my system. I have a separate home partition which i shared with Pardus2009 which i installed later on a different partition.
Now pardus boots fine without errors, but debian says "filesystem check failed" because last mount time of / is in future. it gives a maintenance shell and after a manual fsck corrects this problem, debian reboots fine, but then says theres a problem with the /home partition (but this can be ignored)
I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/S10checkroot.sh: line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.
View 7 Replies View RelatedI'm running Fedora x86_64. I need to setup a virtual machine to do some work on ARM platform. Thus, I've installed QEMU.
Code:
qemu --version
QEMU emulator version 0.13.0 (qemu-kvm-0.13.0), Copyright (c) 2003-2008 Fabrice Bellard
Then, I have dowloaded an ISO image of Debian 6.0 armel.Following instructions on official wiki, I have first created an empty disk image,
Code:
qemu-img create -f qcow debian-armel.img 650M
then I have attempted to boot from ISO image;
Code:
qemu -m 512 -hda debian-armel.img -cdrom debian-6.0.1a-armel-CD-1.iso -boot d
Boot process hangs with the message:
Code:
Booting from cdrom...
639 medium detected
Boot failed: Could not read from CDROM (code 0004)
No bootable device
link refers to Fedora 12, but it seems still unresolved...
loading /usr/bin/teclafsck failed. please repair manually and reboot. the root file system is currently mounted read-only. to remount it read-write do:bash# mount -n -0 remount,rw /attention: only control-d will reboot the system in this maintence mode shutdown or reboot will not work.
View 3 Replies View RelatedI get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
View 1 Replies View Relatedmy cmos battery is dead , not worrying that much about it but the problem is ubuntu , it has trouble booting thanks to fsck , there is a bug herebut i cant boot , i get the following error # Superblock last mount time is in the futureand i cant boot , i can get it working sometimes , with allot of work , but normaly it just fails !i came to the conclusion that the CMOS time and date keeps reseting and so ubuntu thinks that the last time i booted was in the future (if this makes any sense) and fsck freaks
View 3 Replies View RelatedWe have a server for which the root password had been lost, and there were no other user accounts set up. Yesterday evening I attempted to reset the root password by booting from the install CD and using VI to clear the root password in the passwd and shadow files. I then rebooted, and the system has halted with an 'FSCK failed. Please repair manually and reboot' error, with a prompt to 'Enter root password' below. But of course the root password isn't known (I had expected it to blank after editing the passwd and shadow files, but it doesn't work), so I have no way of logging on.
View 6 Replies View RelatedI have Ubuntu 9.10 installed on my HP desktop, but I'm running an older version (8.10) on a live CD so I can at least get online to ask for some When I tried to log on earlier it went to a command prompt and said the 'file system check failed' and to run fsck manually. I entered 'sudo fsck' at the prompt and I selected "y" to fix all the bad inodes, when it was complete it told me to restart, I then entered 'sudo restart' at the prompt and it said 'sudo uuid unknown'. I have not installed anything recently and I'm not sure what to do.
View 3 Replies View Relatedwhile rebooting the system i had supposed to go to file repair system with the problem
fsck.ext3: Unable to resolve 'LABEL=/home' FAILED.
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot.
*** When you leave the shell.
Give root password for maintenance (or type Control-D) (repair file system)# how do i get the system reboot
Lately when I've tried to update my packages many of them don't update. I get nothing out of the ordinary when using the terminal but when I try to update via the Update manger I get this error message:
Code:
Error message:
Fetch failed: W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_source_Sources Hash Sum mismatch
W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_binary-amd64_Packages Hash Sum mismatch, W:Failed to fetch http://mirror.steadfast.net/debian/dists/testing/updates/main/source/Sources 404 Not Found [IP: 208.100.4.53 80]
[Code]...
I've tried several different mirrors but get the same error with every one. Same result with ftp as well. Yesterday I upgraded to Wheezy and every package successfully upgraded, but today the problem started again.
Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:
Model Name:Power Mac G5
Model Identifier:PowerMac7,3
Processor Name:PowerPC G5 (3.0)
Processor Speed:2 GHz
Number Of CPUs:2
L2 Cache (per CPU):512 KB
Memory:1.5 GB
Bus Speed:1 GHz
Boot ROM Version:5.2.4f1
I'm trying to mount a samba share from one Ubuntu server to another Ubuntu server and keep getting:
: cifs_mount failed w/return code = -6
I've searched cifs error codes on google and can't find anything about what it means. Anyone know what it means or has a link to a cifs error codes sheet?
just start Ubuntu 9.04 said: File system chek failed a long is beging saved /var/long/fsck/checkfs if that location is writable Please repair the file systmen manually A maintenance shell will now be started Ctr+ D terminate this shell and resume system boot. Give root password for maintenance or type Control +D to continue. I did Ctr+D , and after login said , that can not find /home. I starte with the live cd:
[Code]....
I woke up this morning to the horror that the ext3 partition on my 1TB drive (the only partition on this drive), in an external USB drive case, was not readable. I did some poking around on Google for related issues, and found that what worked for many was to have fsck check, and possibly fix, some errors that have occurred on the partition. This I did with the following command:
Code:
root@naglfar:/# fsck -y -C -V /dev/sdc1
fsck 1.41.4 (27-Jan-2009)
[/sbin/fsck.ext3 (1) -- /dev/sdc1] fsck.ext3 -y -C0 /dev/sdc1
e2fsck 1.41.4 (27-Jan-2009)
[code]....
I upgraded from deb7 to deb8, but am no longer able to boot. After passing the grub boot menu, the following messages are displayed:
Code:
Select allLoading, please wait...
[ 6.065713] systemd-fsck[148]: /dev/sda1: clean, 428644/1310720 files, 410616
9/52442880 blocks
[ 7.480551] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.692700] systemd-fsck[341]: /dev/sda5: clean, 145485/6176768 files, 17407409/24695552 blocks
[ 18.066215] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead
_
The screen then clears and an underscore is displayed as the sole character at the top left position of the screen. The system hangs at this point. During installation, I rejected two changed files: /etc/init.d/bootlogd and /etc/libreoffice/sofficerc. For both, I opted to keep the installed version (the default choice of the installer) rather than replacing with the new version. The first might be related to the problem, although it seems to be responsible only for logging the boot process, and I would not expect this to compromise booting.
In case this information is useful, sda1 is mounted at /, sda2 is swap space, sda3 is extended, and sda5 is a logical partition mounted at /home.
I am able to boot into rescue mode, but other than that the system is not usable. Unfortunately, no useful error messages are given to aid in diagnosing the problem.
Having problems auto mounting a CIFS share.
These are the errors I get from the kern.log:
And here is the fstab entry:
I can mount the share manually...I am I missing something?
i am using Centos 5, i am trying to mount win2k3 server on centos machine.i am getting the following error.CIFS VFS: cifs_mount failed w/return code = -11
View 2 Replies View RelatedI'm getting BSOD when I'm booting my main system (debian 8 fully updated). I get a BSOD with a _ sign. URL...because I can't access to failed boots files. Besides having the files
Code: Select allfelipe@debian ~ % ls /var/log/journal
362d07f9e18b45f8aec4575c347f181d 92e8a448f7a348719da129184a7e6821
Code: Select allfelipe@debian ~ % journalctl --list-boots
0 0c51ae5b67f144059c5470dbe345d621 vie 2016-03-25 09:05:29 ART—vie 2016-03-25 09:11:58 ART
The problem emerged when I started to make the internal microphone and external speakers work [URL]. In either kernel 2.6.32-24 or 2.6.35-15 - cannot install any package with apt-get. Here is the error I get when installing just anything [URL]. Basically, here is it:
Code:
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.3620.log
dpkg: error processing alsa-driver-linuxant (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libxslt1-dev (1.1.26-1ubuntu1) ...
Errors were encountered while processing:
alsa-driver-linuxant
E: Sub-process /usr/bin/dpkg returned an error code (1)
I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
i am trying to install ubuntu from an SD card, i can run it from the card, and everything works fine, all but the install. i get to step 3 of 6. when pressing forward i get an error message ubiquity.components.partman failed exit code 141
View 1 Replies View RelatedI am re-installing Ubuntu onto my desktop PC which has Windows 7, openSUSE 11.2 and Fedora Core 12. First I tried Ubuntu 9.10. Near the end of the installation the machine reboots and the monitor shows the following message:
"Ubiquity.components.partman failed - Exit code 10. Further info in /var/log/syslog"
Tried again with Ubuntu 10.04 beta2 with same problem.
How can I view and read /var/log/syslog if Ubuntu fails to be installed and therefore I cannot access this log?
I am a beginner in ubuntu and only recently did i install Ubuntu 10.10 using Wubi. I am dual booting along with Windows 7 64bit. Before I got to know of Wubi, I created a free 20GB partition for installing linux. But since it was of no use, I decided to extend another partition adding this 20GB space. The problem now is that I am getting the following error while trying to access the partition.
"Error mounting: mount exited with exit code 12: Failed to read last sector (605949951): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda5': Invalid argument
The device '/dev/sda5' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?"
These are the results after running sudo fdisk -l /dev/sda:
"Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x76c4009c
Device Boot Start End Blocks Id System
/dev/sda1 1 1 992+ 42 SFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 1 13 102400 42 SFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13 6528 52326400 42 SFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 6528 42717 290694144 42 SFS
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).