Anyone using dual monitors (dual head) and has a nvidia graphic card, might be interested in the app, Disper, nvnews.
You can configure a dual monitor, on/off, via nvidia-settings, but you can automate it with Disper by writing a script to execute something like:
I have openSUSE 11.4 with standard KDE and two screens attached.Here's the question: How do I configure dual monitors when using the proprietary nVidia drivers?The openSUSE 11.4 installation put in the "nouveau" drivers for my nVidia card and I was able to configure dual monitors using KDE's Configure Desktop --> Display & Monitors GUI configurator. I could also set up dual monitors using a script based on xrandr (e.g. "xrandr --output VGA-1 --auto --pos 0x0 --output DVI-I-1 --auto --pos 1920x0")My screens are detected as VGA-1 and DVI-I-1 by the nouveau drivers.
OK, today I switched to the proprietary nVidia drivers. Only one of the screens is now detected and displayed in the KDE monitor configurator and that's marked as "default" rather than as a VGA or DVI connection.When I run xrandr to configure monitors, I get error messages if I refer to VGA or DVI hardware.
More info -- RPMs
nvidia-gfxG02-kmp-desktop-260.19.36_k2.6.37.1_1.2-23.1.x86_64
x11-video-nvidiaG02-260.19.36-24.1.x86_64
[code]....
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
View 2 Replies View RelatedI just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
View 4 Replies View RelatedEver since upgrading from F11 to F13, wallpaper spanning has been driving me nuts. No matter what the size of the wallpaper, I cannot get it to span two desktops correctly anymore. Most styles (zoom, scale, etc...) cause the image to be duplicated on both screens and the "span" style centers the image between the screens and appears to scale down the image leaving large gaps on either side. It's like the background program doesn't recognize the "virtual resolution".
View 8 Replies View Relatedfresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?
I have an Nvidia card that supports two monitors. Actually I have it setup. The problem I am having is I want to turn one of my monitors sideways so I can read forms easier. I can do this with just one monitor. RandR works fine with that. But it seems that when the system makes the two monitors into one long one it will not allow me to tweak the rotation in RandR.
Is there something I am missing. I deal with a lot of contracts and forms. And when I am reading them I hate scrolling. So I thought this could be an option. I have searched the net for 6 hours now. Maybe I do not know what I should be searching for.
I used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.
Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.
How do I convince X and KDE to display on both monitors?
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor
2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor)
3.) 3 to 5 seconds later the picute cuts out to the second monitor
4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
I have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.
View 5 Replies View RelatedI have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
I've just installed 10.04 on an old system.
Hardware is:
- NVIDIA GeForce 6600 GT video card
- Gigabyte EP35C-DS3R motherboard with 3 gig ram, few TB of hard-drive
- dual monitors, both viewsonic vx2235wm, primary on analog, secondary on digital (but whatever, happy to reverse the order)
On the old setup (8.04) the monitors were set up as twinview, 1680x1050 each, no problems. On the new setup (10.04) my old xorg.conf (see below) doesn't work and nvidia xserver settings refuses to detect my second (digital) monitor at any resolution greater than 640x480.
I've tried messing with xorg.conf to no avail and google doesn't appear to be my friend.
Here's the old xorg.conf file that worked in 8.04 but refuses to even boot under 10.04:
Code:
I've had so many problems with Ubuntu. it runs fine version 8.10 64 bit, but I can't install nividia drivers to run both my monitors. and of course steam games don't work... So I thought I'd join the Ubuntu forums to ask questions on has to fix it... NOT EASY. I tried to join there forum, but I could not even find a page to make an account? dose anyone know how? They expected me to all ready have one... and after an hour looking at the Ubuntu web site I could not find anywhere to make an account and join there forum. So here I am, hoping someone here can help.I just want to install the Nvidia driver for both monitors work and I might be able to install a 3rd party softare to let me play steam games. but Ubuntu keeps asking for some codes... I'm not sure what they are and when I try and update Ubuntu, if askes me for a password. I never set any passwords as I'm still learning the OS, so I tried "Root" and "Guest" both in lower and upercase, and both don't work. What is the bloody password, I never set one, so why is it doing this to me? I can't update Ubuntu. And it keeps asking me for some bloody code to install the Nvidia drive I downloaded? why? what is this code and where do I get it? And then other searches I've done tell me to get a "command line" and enter a command that deletes and/or fixes the problem... problem is that I have no idea how to find this command line in Ubuntu and know one what's to tell me, like it's a bit secerate, and I can't even join there forum to ask.
I'm a windows expert and work in IT with windows, but I thought it's time I learn more about other OS's, but Ubuntu is makeing it very hard as I can't even join there forum or install a Nvidia driver to run both my monitors, I'm just about to give up on Ubuntu as the surport form I can not access and there is no info on there web site on how to install and run dual monitors, and I can't sign up for there forums anywhere.
As both root and myself, I've gone into the:
configure desktop -> display and monitor
thing and set "primary output" to "DVI-I-1" and
set the DVI-I-2 connection to the "Right of DVI-I-1" position
[code]....
Doesn't work when done either as root or as me. So, there *must* be a way. How?
I've a laptop with 2 external monitors connected to it.Using SaX2 I can't configure it in a way where it only uses the two external monitors and not the laptops own screen.With nvidia-settings I can configure it properly, as I am however unable to save it due to a missing xorg.conf file how am I supposed to save the this config so it isn't 'forgotten' between reboots?
View 2 Replies View RelatedI have been trying to configure dual monitors of different resolutions on 11.4 the Nvidia configuration utility does not know where or what to save anything anymore and goes wonky. Trying to use it is a dead end for me. X11 is a mess. What happened to SAX and things like this that were part of openSUSE and just worked? Supposedly we X11 got better. I think it's got over complicated and much worse. This stuff just worked in 11.1 and KDE 3.
View 9 Replies View RelatedOn openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.
View 5 Replies View RelatedI have a wacom bamboo pen and touch (cth460/056a:00d1). Completed is the driver compile and installation to support this device.It is working. Is there anything special I need to do to accommodate Gimp (ieressure sensitivity) and dual monitors (ie:width)? Any particular command or config app? I know about xinput, wacomcpl, and xsetwacom.
View 1 Replies View RelatedI have a really strange X (?) problem. My physical setup is:
Dell Optiplex 990
VisionTek 210 nV DMS59 PCIe video card (with a DVI splitter)
dual Dell P2411H monitors
I'm running OpenSuSE 11.4 (x86_64 fully patched) with the current nvidia drivers and kernel module. I'm running KDE and kdm in case that matters.
If I power off the two monitors, and then power them on again, the right monitor will come back on. The left monitor (which is the primary one... it's the one where the login screen appears when you are first logging in) reports that it is in power save mode. Wiggling the mouse, typing, etc., do not wake it up. The only thing that wakes it up is the detach the DVI cable from the monitor and reattach it (and sometimes it takes a couple tries).
I have used two (identical) video cards and splitters, and the problem occurred with both, so the problem doesn't appear to be with either of them. I also swapped monitors, but after the swap, the problem still occurred on the left monitor, and the old left monitor (which was now right) came on fine, so it doesn't appear to be a monitor problem.
I'm baffled. For now, I just won't turn off the monitors (or at least not the left monitor).
I want to be able to login on different users on my two screens. Is that possible? It would be nice if I could have the left screen and my gf could have the right. I'm using ubuntu 10.04 with gnome, and I have a Nvidia graphics card.
View 8 Replies View RelatedWhen I split the partition in my windows system, my harddisk was converted to Dynamic Disk. Now I want to install dual-boot with Ubuntu on my computer, is it do-able? How?
View 1 Replies View RelatedI have been playing around a bit today and decided to hook my tv up to my slack box. I have an NVIDIA gt220 using the proprietary drivers which supports multiple monitors and I can get various setups like an extended desktop and xinerama, but what I can not seem to do, and what I'd actually like to do, is just have both the monitor and the TV display the same images. If it would work better/easier I also have a second NVIDIA card, although it is a different model. I haven't bothered trying that yet as it seems like it would be easier to configure one card instead of two.
View 10 Replies View RelatedSo I'm using Lenny, trying to get dual monitors set up. I'm not sure on the correct steps, but have done some googlin' and wasn't finding what i was looking for. (could be that i just missed it)
lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]
01:00.1 Display controller: ATI Technologies Inc RV516 [Radeon X1300 Pro] (Secondary)
I have a Dell inspiron 1525 laptop with a 1280x800 display and an external 1280x1024 monitor. I'm using 9.04 with openbox. I've done a loooot of online reading about how to get a dual monitor setup using xrandr, and I really don't know what I'm missing here. So here's the deal: I want to have my external monitor on the left of the laptop's display, and of course I want each of them to display different parts of the desktop.
First I set up the right resolution to each one of them (I do it using lxrandr). Typing xrandr -q in a terminal, I get the following:
[Code]...
I have an asus p5kpl-cm MB. I plugged in a radeon 9200 pci card. In the bios, I can set up:
pci/igd
igd/pci
igd
etc.
This determines which of the 2 displays (pci card or internal graphics on the MB) is the boot display. That determines which comes up with the bios screen and then once booted into ubuntu (10.04), this is the only adapter/monitor seen. The button detect monitors doesn't do anything.
lspci sees both my internal and pci card graphics. So, I can get either to work just fine (auto detected etc.) just not both at the same time.
I've tried all of the 3 above settings, and even when I set it to just igd, lspci still sees both my adapters. It identifies them correctly, and it works perfectly, detecting the monitor and knows the resolutions for each - just not both at the same time.
Does ubuntu know how to automatically configure more than one display w/o doing something else, or must I do something else to get both going together?
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
[Code]....
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
I'm running a lenovo laptop with an nVidia Quadro FX 570M and Ubuntu 9.10.
I cannot get my external monitor to work properly for me (using nvidia-settings). It basically creates a single continuous monitor space across both the external and the inbuilt monitor (maximising a window, covers BOTH monitors and the gnomepanels run across both monitors)
I think its related to my xorg.conf settings, which are as following, Can any one help:
(It used to work for me when I was using ubuntu 8.4)
i have just installed fedora 11. i have two monitors. how to set up dual monitors in fedora 11 ? i tried a lot to search for a way out, however no joy.
View 2 Replies View RelatedI installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA.Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this.Several issues have arisen since installation:
1) I've clicked through all of the display settings to activate the second screen with absolutely no change.
2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure.
3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.
I'm having trouble setting up dual monitors on my HP Pavilion dv7-1020us laptop, with an Nvidia 9600M GT graphics card, and Ubuntu 9.10. I installed Ubuntu via Wubi, on top of Windows 7. I tried this before on the same laptop when I was using Vista and Wubi, and Ubuntu was able to recognize my Graphics card, and install a proprietary driver. I wasn't able to test dual monitors, though. However, now that I'm using W7 and Ubuntu, it cannot use a dual-monitors correctly. It recognizes the monitor, but it only displays a mirror display of my Laptop monitor, not acting as a separate monitor, like I want it to. I tried messing around with the settings in the display menu, but nothing works. I tried downloading linux drivers for my card from Nvidia's site, but the file is in a .run extension, which I don't know how to install. What should I do to get this working?
View 7 Replies View Related