I'm new to android app development (but not to java) and I want to transfer apps I create on ubuntu to my HTC Incredible mobile phone. My computer's a desktop, so I don't have anything fancy like a bluetooth (unless you recommend I buy a USB one for this). What is the best way to transfer apps to my droid?
I tried using USB, but for some reason neither Ubuntu nor my droid sees the other. It doesn't even charge when I connect it via USB.
I recently installed Ubuntu 10.10. I wanted to setup my droid incredible as a modem to connect via the builtin broadband connection under network manager. I searched around and found couple of ways using wvdial as well as a tunneling app. The funny thing is, that I was able to setup my phone as a usbserial device and use it ONCE to connect successfully via the built-in broadband connection setup method. But ever since, it has not worked . Currently I am running a fresh install of 10.10, and have tried to insert usbserial module for my phone in the kernel, but it does not work. The command I used :
Code: sudo modprobe usbserial vendor=0x00b4 product=0x0ffb I have not made this change permanent though. But whenever I run this and connect my phone with broadband connect enabled, it recognizes my phone however it uses a 'generic' driver according to the logs, and it never lets me enable Broadband Connection or connect successfully.
I have been attempting to set up a bunch of partitions on a bunch of hard disks, in preparation for installing Maverick. I will be setting up a number of RAID partitions, so I will install from the alternate disk (ubuntu-10.10-alternate-amd64.iso). Now ever since they added support for GRUB2 and a new partition type and align-to-megabyte and a whole bunch of other goodness, partitioning has been buggy. This has been true for Maverick and Lucid. Even the 10.04.1 version (an Ubuntu LTS!) still has problems. Every time I try something else, some other bizarre bug rears its ugly head. (Yes, I have been reporting them on Launchpad when I find a new one.)
In order to move forward on this project, I have been using a variety of partitioning tools. I temporarily installed Maverick on a small partition, and have used Disk Utility (palimpsest) and GParted while booted into that. Occasionally when things get really strange I boot up the latest version of System Rescue Disk, which contains the latest version of gparted. I use these various tools to try out various partitioning schemes, just laying out empty partitions that will be formatted or assembled into RAID arrays later. When I get all the desired partitions set up, I will boot into the alternate installer and do the final installation. (I don't want to do the entire thing within the alternate installer because it makes my head hurt. I do have a lot of partitions.) This has been going on for weeks now. Every time I try something different, something weird happens, and I have to try various workarounds, or switch to different tools. Basically, my partitions eventually become unstable.
Here's the latest mind boggler: Disk Utility displays nice graphical maps of your partitions. This image includes before and after screenshots showing what happens to my partitions occasionally. We start with three primary partitions and one extended partition. The extended partition goes all the way to the end of the disk. We put a small logical partition into the extended partition, at the beginning of it. We can then click on the "free" portion of the extended partition and create additional logical partitions if we like.
Afterwards, the extended partition has magically shrunk itself down until it is the same size as the small logical partition it contains. The free space has migrated out of the extended partition, and is now useless, as you can't have more than four primary+extended partitions. Disk Utility won't let you create another partition. What happened between the Before and After pictures? I don't know. I do know that I did not ever tell any tool to change the size of any partition. Moving or resizing partitions can trigger various known bugs, so I never even try to do that, I just delete partitions and start over.
I'm running 12 (x64) on my dell inspiron 1525. It's been fine for 6months. Just updated it and now it is running incredible slow, I can't really use it, typing is delayed, opening prgrammes delayed, scrolling etc. The updates were just those that were flagged up on my desktop so I have no idea which particular update has caused this.
Alright so I've just reinstalled openSUSE 11.2 but apperently some stuff doesn't work the way they used to. YAST install software is incredible slow. The booting took forever when loading all the packages and now installing also takes a loong time and I have a pretty fast internet aswell.
I recently found how to ssh into my ubuntu system with my droid, but I can't seemed to do it the other way around, even if my droid is running off my wireless with the same ip (maybe that's the problem?).
I can sync my Motorola Droid using the USB cable without any problems but I don't always have the USB cable with me and I haven't been able to sync my Droid using bluetooth. My laptop can see the Droid and the Droid can see my computer but it says on my Droid "Paired but not connected". All I want to do is send files back and forth (tethering would be nice but I don't really need to be able to do that).
I can now (I'm really not sure why) send files from my laptop running Ubuntu 9.10 to my Droid but I can't send files from my Droid to my Laptop. Also when I try to "Browse file on device" I don't see any devices even when I select phone as device type.
I've tried what seems to be the best music software. Banshee and Amarok seem to be the most popular and I can't get either to sync. Banshee doesn't do it properly, it "syncs" but roughly 1/3 of the songs don't show up. I believe this to be due to the Amazonmp3 folder which I did move everything out of. Next I tried Amarok. I guess it's a bad case of user error because I can't even figure out how to sync it at all. All I know of right now is to manually create the m3u file in gedit. 11.4 btw and it's a droidX
I have an SSH server running on my netbook on port 2222 and a VNC server running on 5901. The router only has port 2222 open to the laptop.
I use Connectbot on the Droid to connect t my Ubuntu via 2222 with a local port forward enabled 5901 to 192.168.1.111 (laptop IP) port 5901.
Once the conenction is established, I use VNC viewer on the Droid and have it go to 127.0.0.1 port 5901 (to be forwarded by Connectbot over the SSH pipe).
I want to take it a step further. I want to administer my DGL-4500 router without having to remote control the laptop and open firefox. My router doesn't allow SSH.
An obvious solution (in my small mind) would be to install a simple web server process on say port 8080 and do a port forward on the phone to 8080. Then whenever that port is hit, I would want some process that would take the request and pop that person over to 192.168.1.1...
Any ideas on how I could do this OR a better idea on how to do it better without opening the router to the outside world?
I am theorizing I could do a VPN server instead and then find a VPN app. With a VPN, I am theorizing once again I owuld assume an IP address in my home network and then just type 192.168.1.1 on my phone and connect in that way?
Linux for starters, have used this link to help set up the phones tethering using wired cable the computer is old with no wireless and it is integrated into the motherboard so dont flame about spending 20 bucks on a wireless card please. Now, we can start tunneling betwwen your computer and your phone. Change directory to the tools subdirectory of the extracted Android SDK directory. Issue the command ./adb forward tcp:8080 tcp:8080... everything went smooth until here ... there doesnt appear to be a filenamed ./adb so i cant move on and dont know where to go from here.
it is worth noting i am a noob to android sdk and i think i need to set somemore up to get it to work right you download a starter package and the rest you reach out and grab with the starter package although i dont know where tostart there either.
World of Warcraft requires that TCP Ports 1119, 1120 and 3724 are forwarded. The Blizzard Downloader requires that TCP ports 3724, 1119, 4000, 6112, 6113 and 6114 are forwarded. It can also benefit from having ports 6881 through 6999 forwarded. The World of Warcraft Voice Chat feature uses UDP Port 3724.
i use the hotspot feature to play warcraft and i am running ubuntu 10.10 ... i need to forward these ports ... any way to easily download an app to configure the phone like you would a router? its probably easy i just cant find it.
Sony Vaio X upgraded to 11.04 with 2.6.38-8-generic i686 which improved some features but which introduced a serious WiFi problem: while other WiFi works well, connecting via my Droid hotpsot fails consistently despite reboots of everything and renaming of SSID. Another laptop running 10.04 still works fine with the Droid hotspot. One hint: upon upgrading, there was the warning that the laptop hardware did not support Unity and I always get the classic Gnome display.The Droid hotspot shows up in the list of SSIDs but attempts to connect always fail, even when it is made totally unsecured.
Atheros AR9285 Wireless Network Adapter Qualcom Sony Gobi 2000 Wireless Modem ifconfig shows no packets with wlan0 or any connectivity. iwconfig shows correct SSID and other info.
Gonna try and switch to a lixun distro.... but want to make sure I can still do these:TorrentingInternetTether with my droid to be abel to play PS3Also my wife loves little games like cards, bejewled etc.. I heard linux has a lot of free games?
Some minimized apps no longer appear in the top menu and by that are no longer accessible.For example firefox with the minimize addon or Jungel Disk backup service.How can I reach apps that minimized them self and are not shown in the top menu?
Is there any software that can do that? I would hate to have to run the android emulator software and run remotedroid on it.... so many wasted resources for a simple program. Any one know of an app that would let me do this that is made for linux? (specifically ubuntu)?
I'm using Rhythmbox to manage my music collection. I have ripped my CDs into FLAC files. I'm using the Motorola Milestone (The Droid) as my music player and syncing it using Rhythmbox.
Now, when I transfer my music files from Rhythmbox to the Milestone, it automatically convert the FLAC files to MP3. But the conversion is set to 128Kps.
How do I change this default conversion rate? Or even, how do I change to another conversion format altogether?
I was trying to install the android sdk so I can write some apps and play around on a new droid phone i hope to get tomorrow. I had 64bit FC11 installed but the android stuff is only 32bit. I needed to install a bunch of the 32bit libs to get this to work. I installed FC11 64 bit. This cuased problems because the android stuff is 32bit. I couldn't get it to launch so I had to install the 32 bit libraries as well. A lot of the libraries could be removed but I think they will be helpful and useful in other stuff as well.
After installing these just follow the normal android install. I had another problem with the android install because the Ganymede Update Site was not checked so it wouldn't download the updates for the eclipse software. In the Software Updates and Addons window click Manage Sites, check Ganymede Update Site. Here is the link if you have to add it.[URL]..# instruction to get 32 bit android stuff in 64 bit FC11 Add an "rpm" Macro. You'll need this later or it will be hard to tell your rpm versions apart.
Add the following line to the "/etc/rpm/macros" file:
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch} Code: [stoggy@localhost][~] [10:13 AM]$: echo "%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}" | sudo tee -a /etc/rpm/macros %_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
I was trying to connect my android phone just to send some AT commands using Minicom or Seyon. But I was not able to connect it. I have connected my phone using a USB cable.Do I need to connect my phone through the serial cable by using a minicom connector to be able to send the commands to the phone.Also when I launch it says Initializing Modem...thenModem at /dev/ttyS0 is available. If I try to Dial it says Warning related to the Baud rate.But After that I am not able to do anything.
I'm having the issue that I cannot conenct to the wlan of my Motorola Milestone/Droid with Android 2.2 and the 3G Hotspot service started. When I want to connect, I have to type the WPA2 passhrase in, I do that correctly and then the system tries to conenct. This failed and then I have to type the passphrase again.It's a Samsung N130 Netbook with Ubuntu 11.04 installed.
I guess I'll be asking the impossible... Is it possible to EASILY move my Ubuntu set up from one disk (smallish) to a bigger one, so that I can install Win7 as well on that bigger disk drive? I am not too keen on reinstalling ubuntu because then I will lose all those other ubuntu programs that I have installed.
I bought a 30 GB SSD and I need to install Ubuntu on it. I currently have a 1500 GB harddrive, on it my current 60gb ubuntu partition and the rest is Windows 7.Out of the 60 GB for ubuntu I have used 9 GB, so I want to transfer that 9GB to the SSD to preserve all my settings. Then I want to format the original 60GB to something else, probably NTFS since both linux and windows can read it.I tried sbackup but that creates a back up on my current drive, not what I intended. If there is a gui program that will work that would be great, if not I'll still give whatever suggested a shot.
I've resolved to move onto Ubuntu, but I haven't done so quite yet. One question that sprang to mind was the transferral of files from the Windows OS to the Linux OS on the same machine, if it's possible. I'm thinking something like the dual partition, though I suppose Copy/paste wouldn't work.
Another possible solution was using dual partition and then Windows SCP, but everything I've read on the topic indicates that SCP works by finding the (different) host address of the computer; thus it would read my machine as one, even if I'm running Ubuntu on it as well.
how to transfer these friggin' things.
Part of the reason for my query is that I am quite strapped financially and am unable to backup my files on an internet service or on discs.
I would like to transfer a massive amount of data between my laptops simultaneously. Is there a way to attach a cable via one flash port on one laptop to another and transfer like that?
i have one laptop with ubuntu on it but no internet connection due to the loss of my gnome-panel package, and another with windows on it that has an internet connection, the easiest way to connect to the internet on ubuntu is through the gnome panel and so i think the best way around my problem would be to somehow transfer the gnome-panel package from the windows computer via usb harddrive, to ubuntu, is there a way in which i can install the gnome-panel package and transfer it, or other ideas around my problem?
OK I have a problem, well I think it's just ubuntu because this has done this in 9.04 and 10.04 and still in 10.10. When I go to drag and drop the music files from iPhone to my music folder, the files transfer, but they don't transfer with the name of the song. They get transferred with a name of 4 digits like this "BVFG.MP3" (example).
I am not going to go through all 1,200 of my songs and rename them one by one that's ridiculous.
Here's a screen shot. That is actually More by Usher, but it doesn't say Usher obviously.
I want to convert my wife's computer from MS XP 2003 to Ubuntu 10.10. I have saved "My Documents" to an external hard drive. How will I go about transferring these files to Ubuntu? Do I just pick individual files and go to "Save As"? Can I just transfer them en mass?
I have a question regarding the migration of the system to a new HDD. I currently have an 80GB HDD that has Windows 7 x64 installed and another 80GB HDD that has Ubuntu 11.04 x64 installed. The boot loader uses Grub2. I want to migrate the 80GB disk that hosts Win7 to a new 500GB HDD using Acronis True Image Home 2011 and then migrate the other 80GB disk that hosts Ubuntu to a new 800GB HDD following the steps described in the following page:
[URL]
Is this going to work or everything will be messed up with Grub2?
