Ubuntu Networking :: Setting Up Droid 2 (router) Ports?
Dec 28, 2010
World of Warcraft requires that TCP Ports 1119, 1120 and 3724 are forwarded. The Blizzard Downloader requires that TCP ports 3724, 1119, 4000, 6112, 6113 and 6114 are forwarded. It can also benefit from having ports 6881 through 6999 forwarded. The World of Warcraft Voice Chat feature uses UDP Port 3724.
i use the hotspot feature to play warcraft and i am running ubuntu 10.10 ... i need to forward these ports ... any way to easily download an app to configure the phone like you would a router? its probably easy i just cant find it.
View 2 Replies
ADVERTISEMENT
Jun 18, 2011
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
View 1 Replies
View Related
Jun 29, 2010
I want to lock down my server to allow only certain ip addresses and ports in. I was thinking of doing this through the iptables but someone sugguested I used the hosts.allow and deny files to allow who can access the system. What do people suggest? If I"m trying to ensure no ip's can access my system except the ones I want, how would I do this with just the allow and deny files?
View 4 Replies
View Related
Apr 8, 2011
Is there a utility to forward ports on a simple home networking wireless router from commandline using upnp?
View 1 Replies
View Related
Jul 23, 2010
I tried to setup a Ubuntu Wired Router according to the manual but found a problem.
At the end of the doc page it says:
Code:
The problem though is that I don't have a wireless connection and what do I put at the end?
It says "bridge-ports eth1 wlan0" so should I change that to "eth1" twice or just leave "wlan0" out or how do I fix this?
View 9 Replies
View Related
Jan 27, 2010
Setting up a Linux router in Fedora 10. The router has an IP (192.168.1.1) for the eth0 on the internal LAN and a static registered IP for eth1 on the internet connection. All the internal LAN client PCs have gateway set to 192.168.1.1. My question is what do I set the gateway address to on eth0 and eth1 and how would I configure this in /etc/sysconfig/network?
View 2 Replies
View Related
Jan 28, 2010
I wish to setup my spare PC as a router. I was wondering what programs, in ubuntu, I can use to monitor and change settings concerning bandwidth usage. I want to throttle down a computer in my network so what program would be good for this?
View 1 Replies
View Related
Aug 21, 2010
Okay, a few days ago I got a small job setting up a router for a neighbour of mine. He wanted me to set up a wireless network for him. The router he bought is a Linksys Wireless N-Router E1000. I set it up the passwords and everything. Only to find out that I couldn't connect at all to it. The main computer with a direct ethernet connection to the router was the only one that had internet. Everytime I attempt to connect wirelessly with any device, it will take extremely long time to connect, to the point where I will just quit connecting.(Example: 15 minutes of waiting, when the laptop is right next to the router)
Any ideas about what I am doing wrong here? As far as I can think of it might just be a faulty router, because the router will not implement any changes(like setting a password) I set on it. Only wired connections seem to work. the router is called a linksys wirless N-router E1000.
View 2 Replies
View Related
Jan 28, 2011
post the "perfect" tutorial for setting up a router and firewall for Ubuntu 10.10 Server 64-bit? I'm kind of a n00b when it comes to Linux, so I get really confused with some things, I have seen things on the ubuntu wiki about this... but it really confuses me =
I'm trying to setup my ubuntu sys as a router and firewall... Internet -> Ubuntu (Router) -> Switch (no DHCP on it) -> Computers I've already setup bind and dhcp3 and got those working perfectly... I've also setup Squid3 and Dansguardian for content filtering (blocking ads and such) and got them working too... I want to set it all up to be transparent, and allow the system itself to function as a powerful firewall router, giving absolutely NO issues to client computers connected, and no speed reduction at all.... I want to setup the firewall to allow all outgoing connections, but block everything incoming (stealth the network)... Forcing all http/s traffic to pass through dansguardian, then to squid...
But am very confused on how to pull this off... The system is running Ubuntu 10.10 Server 64-bit, with 4 GB of RAM, 320 GB SSD, and two 1Gb NIC cards... Sorry if I'm not very clear, I do speak english perfectly, but just kinda new to the "Linux world", I was using SONICWALL but that's getting a little too costly to my network and wanna do a free alternative... Something completely CUSTOM, not using some network security distro.
View 1 Replies
View Related
Feb 8, 2011
I decided to try and get my network ready for IPv6. All of my hosts are set up to do stateful autoconfig, I have radvd installed and working, and I can ping6 ipv6.google.com from my Ubuntu server. However, when one of the clients on the inside tries to ping6, no packets return and I get this message in the router's syslog:
Code:
Feb 8 17:55:17 foo kernel: [ 1344.824474] Dead loop on virtual device tun6to4, fix it urgently!
View 5 Replies
View Related
May 30, 2011
I have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
View 2 Replies
View Related
Oct 19, 2010
I have an old pc that I would like to use as a headless server for my music, files, etc that I can access at work and other places outside of my network. I'm a complete noob in this department so please excuse my overwhelming ignorance. The only thing I've managed to succeed at was installing fedora 13. Two things in particular are giving me trouble: 1.)setting up my router and fedora box so that it has a static ip address and 2.)connecting to the fedora box via vncviewer on my laptop.
HERE ARE SOME QUICK SPECS THE DEVICES INVOVLED:
Fedora Box: Intel Pentium 4 2.66GHz, 1GB ram, Fedora 13
Laptop: Toshiba Satellite A505, Intel Core 2 Duo T6600 2.20GHz, 4GB ram, Windows 7 Home Premium 64-bit
Router: D-Link WBR-1310
ISP: Comcast (cable)
HERE'S WHAT I'VE DONE SO FAR:
Setting Static IP
On the fedora 13 box:
1.)Went to Network Connections and added a new connection
2.)Copied mac address from the default connection
3.)On IPv4 tab, added new address: 192.168.0.200 (this is out of the range which my router will assign automatically) netmask 255.255.255.0, set gateway to 198.168.0.1(router's ip on the network)
When I connect to this new connection web pages don't load, etc. but when I'm on the default connection I have no problems.
Connecting With Vnc Viewer
On the fedora 13 box:
1.)System -> Preferences -> Remote Desktop
2.)Under Sharing I checked "Allow other users to view your desktop" and "Allow other users to control your desktop"
3.)Under Security I unchecked "Ask you for confirmation", checked "Require the user to enter this password", and specified a password
On the router
1.)Set up port forwarding for port 5900, TCP only, to the ip address of the fedora box.
On the laptop
1.)Installed VNCViewer
2.)Went to whatsmyip(dot)org to get ip address of router
3.)Tried to connect to that address, port 5900 (ex. ##.##.##.###::5900)
4.)Connection times out everytime.
View 5 Replies
View Related
Jan 8, 2010
Setting up desktop (9.04) behind router for remote access by latptop (9.10) I am setting up desktop (9.04) behind router for remote access by latptop (9.10). Rationale: All of my files are on my desktop HD, but I am often out of my home needing to work on my files. It is becoming labour intensive to keep track of the files I make/change and try to copy them on my non-connected desktop/laptop.
Dream: Able to remote access and modify my desktop files from my laptop (while the files remain on the desktop). Request: A simple, GUI, basic, non-technical guide how to set it up!
What I know: 1.I was going to use the 'Remote Desktop' VNC connection under System->Preferences. However, if I understand this correctly, this only secures my computer (i.e. Locks the front door of my desktop) and the data streamed between them is not encrypted.[URL]..
2.Then I need to set up my router to accept the connection from my laptop.
3.Then I will need to use SSH to secure the info sent between them. This is the bit I don't really have a good grip on.
[Code]...
View 5 Replies
View Related
Jan 12, 2011
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies
View Related
Aug 13, 2010
I have three machines say A B and C. I want to make machine B as a router for A and C, so that the ping packets from C to A should be going via B. I have directly connected two interfaces(eth4) of A and B and similarly two interfaces(eth5) of B and C. I have even set up a route between B and C. 1. But I am not able to set a route between B and A.2. If I ping A from eth4 of B(viceversa) it works. When I ping B from eth5 of C it work but not the viceversa.3. Also, if I ping from C to A, B receives the packets, but not A.
View 3 Replies
View Related
Mar 31, 2011
i must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
View 1 Replies
View Related
Sep 8, 2010
I have linux server setup on a network with 2 interfaces. One (eth0) is connected to the regular network and the other (eth1) has a DHCP server and transparent web cache listening on it. The machines connected on the eth1 side are on a different subnet and the linux server is there gateway. Untrusted machines are introduced to this network to keep them isolated.
This isolation works well, too well. There are a small set of resources on the regular network I would like to make available to machines on untrustworthy network. I think I need to use iptables but alas I've had no luck in piecing together the command I need (in one case looking myself out and having to physically reset the machine).
View 3 Replies
View Related
Mar 1, 2011
This morning I was looking at the router's log file and noticed a certain IP address was able to gain LAN access on port 2222. That just happens to be the port my SSH server is listening on! A whois search revealed that IP address is in Germany. As soon as I found this out I stopped forwarding all ports to this machine in my router.
how to tell what had happened, what information this person was able to obtain, and if he left any goodies behind that could hurt me? I've read through some of the logs on my computer and haven't been able to find much at all. I did have some personal information on the hard drives, but that information is encrypted. I'm thinking if they were able to get my SSH password then that information probably isn't safe either (assuming they have some of it).
View 7 Replies
View Related
Mar 19, 2010
I have an SSH server running on my netbook on port 2222 and a VNC server running on 5901. The router only has port 2222 open to the laptop.
I use Connectbot on the Droid to connect t my Ubuntu via 2222 with a local port forward enabled 5901 to 192.168.1.111 (laptop IP) port 5901.
Once the conenction is established, I use VNC viewer on the Droid and have it go to 127.0.0.1 port 5901 (to be forwarded by Connectbot over the SSH pipe).
I want to take it a step further. I want to administer my DGL-4500 router without having to remote control the laptop and open firefox. My router doesn't allow SSH.
An obvious solution (in my small mind) would be to install a simple web server process on say port 8080 and do a port forward on the phone to 8080. Then whenever that port is hit, I would want some process that would take the request and pop that person over to 192.168.1.1...
Any ideas on how I could do this OR a better idea on how to do it better without opening the router to the outside world?
I am theorizing I could do a VPN server instead and then find a VPN app. With a VPN, I am theorizing once again I owuld assume an IP address in my home network and then just type 192.168.1.1 on my phone and connect in that way?
View 3 Replies
View Related
Dec 6, 2010
I recently installed Ubuntu 10.10. I wanted to setup my droid incredible as a modem to connect via the builtin broadband connection under network manager. I searched around and found couple of ways using wvdial as well as a tunneling app. The funny thing is, that I was able to setup my phone as a usbserial device and use it ONCE to connect successfully via the built-in broadband connection setup method. But ever since, it has not worked . Currently I am running a fresh install of 10.10, and have tried to insert usbserial module for my phone in the kernel, but it does not work. The command I used :
Code:
sudo modprobe usbserial vendor=0x00b4 product=0x0ffb I have not made this change permanent though. But whenever I run this and connect my phone with broadband connect enabled, it recognizes my phone however it uses a 'generic' driver according to the logs, and it never lets me enable Broadband Connection or connect successfully.
View 1 Replies
View Related
Dec 25, 2010
Linux for starters, have used this link to help set up the phones tethering using wired cable the computer is old with no wireless and it is integrated into the motherboard so dont flame about spending 20 bucks on a wireless card please. Now, we can start tunneling betwwen your computer and your phone. Change directory to the tools subdirectory of the extracted Android SDK directory. Issue the command ./adb forward tcp:8080 tcp:8080... everything went smooth until here ... there doesnt appear to be a filenamed ./adb so i cant move on and dont know where to go from here.
it is worth noting i am a noob to android sdk and i think i need to set somemore up to get it to work right you download a starter package and the rest you reach out and grab with the starter package although i dont know where tostart there either.
View 1 Replies
View Related
Jun 26, 2011
Sony Vaio X upgraded to 11.04 with 2.6.38-8-generic i686 which improved some features but which introduced a serious WiFi problem: while other WiFi works well, connecting via my Droid hotpsot fails consistently despite reboots of everything and renaming of SSID. Another laptop running 10.04 still works fine with the Droid hotspot. One hint: upon upgrading, there was the warning that the laptop hardware did not support Unity and I always get the classic Gnome display.The Droid hotspot shows up in the list of SSIDs but attempts to connect always fail, even when it is made totally unsecured.
Atheros AR9285 Wireless Network Adapter
Qualcom Sony Gobi 2000 Wireless Modem
ifconfig shows no packets with wlan0 or any connectivity.
iwconfig shows correct SSID and other info.
[code]....
View 7 Replies
View Related
Aug 30, 2010
I am trying to open a tunnel for a friend of mine who's isp has blocked a bunch of webpages, so I was thinking I would learn how to since it might come in handy in the future Anyway, so I looked at a couple of videos about going in to network settings and changing the setting to manual and write down the desired IP (in my case 192.168.0.137). Then I went into my router (it's a D-link DI 524) and tried adding my static IP as the DMZ computer. I then restarted, everything looked fine, the router saved the settings and the eth0 still hade the information saved so I wanted to try it out. I just googled "try my ports" and I found a website called [URL]...But no ports worked for me.. I tried double checking everything, checking for errors. I couldn't find anything so I'm guessing you might have a clue!
EDIT: It seemed I had to have a program that actually used the port for it to work.. It's working anyway, so if you could move it to [SOLVED] I'd be happy
View 1 Replies
View Related
May 1, 2010
I just got my Incredible running, and wanted to tether my laptop to it. Is there anything like PDANet that runs in Ubuntu?
View 9 Replies
View Related
Feb 24, 2010
I am running VirtualBox on CentOS 5.4 & am not able to connect the usb ports to the guest operating systems. When I click on the device menu & usb, the devices I have plugged in show up, but are greyed out. I had this problem on Mandriva when I first started using VirtualBox & had to put my user account in the USB group. My account is in the vboxusers group but there is no USB group on CentOS & I can't figure out how to give myself permission to the USB ports.
View 6 Replies
View Related
Feb 14, 2011
Within the documentation of example OpenVPN setups there is a setup that shows an OpenVPN Server with two network interfaces. One interfaces is plugged into the public internet network and the second interface is plugged into the private network.
Normally I assume that it would be best to place the OpenVPN system inside the network behind the router and firewall and open only the ports needed on the router to allow access to the OpenVPN system. All other router ports would be closed. This is the first example they show. To see what I am talking about see page(s) 6-7 here -> [URL]
If one were to use the two interface public facing setup, when would that setup best be justified? I guess if you didn't want to open any ports on the router/firewall then this could be justified but then you have to lock down this public system individually instead of having it protected by the network firewall.
View 1 Replies
View Related
May 22, 2011
I'm having the issue that I cannot conenct to the wlan of my Motorola Milestone/Droid with Android 2.2 and the 3G Hotspot service started. When I want to connect, I have to type the WPA2 passhrase in, I do that correctly and then the system tries to conenct. This failed and then I have to type the passphrase again.It's a Samsung N130 Netbook with Ubuntu 11.04 installed.
[Code]...
View 9 Replies
View Related
Jul 24, 2010
I am running a web server with a public ip that is dynamic. I am using ZoneEdit.com and my WRT54GS router to manage my dynamic ip address whenever it changes. It is working as it should.
However, the subdomains ip addresses are not changing. It still shows the old addresses versus the new address. Is it possible to set it where my subdomains address will change as well?
Right now on my router under the ddns menu, I have the host name set to domain.com. Do I need to make a wildcard?
View 2 Replies
View Related
Sep 23, 2010
If not should I just plug up directly into my modem?
View 2 Replies
View Related
Apr 13, 2010
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies
View Related
