Ubuntu Networking :: Cannot Conenct To The Wlan Of My Motorola Milestone/Droid With Android 2.2 And The 3G Hotspot Service Started?
May 22, 2011
I'm having the issue that I cannot conenct to the wlan of my Motorola Milestone/Droid with Android 2.2 and the 3G Hotspot service started. When I want to connect, I have to type the WPA2 passhrase in, I do that correctly and then the system tries to conenct. This failed and then I have to type the passphrase again.It's a Samsung N130 Netbook with Ubuntu 11.04 installed.
[Code]...
View 9 Replies
ADVERTISEMENT
Dec 25, 2010
Linux for starters, have used this link to help set up the phones tethering using wired cable the computer is old with no wireless and it is integrated into the motherboard so dont flame about spending 20 bucks on a wireless card please. Now, we can start tunneling betwwen your computer and your phone. Change directory to the tools subdirectory of the extracted Android SDK directory. Issue the command ./adb forward tcp:8080 tcp:8080... everything went smooth until here ... there doesnt appear to be a filenamed ./adb so i cant move on and dont know where to go from here.
it is worth noting i am a noob to android sdk and i think i need to set somemore up to get it to work right you download a starter package and the rest you reach out and grab with the starter package although i dont know where tostart there either.
View 1 Replies
View Related
Jun 26, 2011
Sony Vaio X upgraded to 11.04 with 2.6.38-8-generic i686 which improved some features but which introduced a serious WiFi problem: while other WiFi works well, connecting via my Droid hotpsot fails consistently despite reboots of everything and renaming of SSID. Another laptop running 10.04 still works fine with the Droid hotspot. One hint: upon upgrading, there was the warning that the laptop hardware did not support Unity and I always get the classic Gnome display.The Droid hotspot shows up in the list of SSIDs but attempts to connect always fail, even when it is made totally unsecured.
Atheros AR9285 Wireless Network Adapter
Qualcom Sony Gobi 2000 Wireless Modem
ifconfig shows no packets with wlan0 or any connectivity.
iwconfig shows correct SSID and other info.
[code]....
View 7 Replies
View Related
Aug 10, 2010
I want to tether my Milestone phone with my Lucid 10.04. I did a search regarding the software needed on the PC side to support this but unfortunately I found none. What all I got is a S/W named Pdanet to be used with windows only.
View 2 Replies
View Related
Mar 27, 2010
I'm using Rhythmbox to manage my music collection. I have ripped my CDs into FLAC files. I'm using the Motorola Milestone (The Droid) as my music player and syncing it using Rhythmbox.
Now, when I transfer my music files from Rhythmbox to the Milestone, it automatically convert the FLAC files to MP3. But the conversion is set to 128Kps.
How do I change this default conversion rate? Or even, how do I change to another conversion format altogether?
View 1 Replies
View Related
May 1, 2010
I just got my Incredible running, and wanted to tether my laptop to it. Is there anything like PDANet that runs in Ubuntu?
View 9 Replies
View Related
May 14, 2011
I have the weirdest problem on the newly (freshly) installed Natty on my Acer Aspire 5741G: Wifi connectivity is good out-of-the-box and can connect (at least with my office's network) but cannot connect with my phone's (HTC Legend with Froyo) configured as a portable hotspot.
The network can be detected, but fails to connect. I have tried with WPA, without any security.... it all does not work.Previously Lucid 10.4 connected flawlessly out-of-the-box on the same machine.Other devices detect and connect to the phone without problems.
View 9 Replies
View Related
Apr 29, 2011
I often connects my laptop (Asus EEE) to my HTC desire hd with the wifi hotspot. But this doesn't work since yesterday when I upgraded to 11.04. When I connect the laptop to the phone the screen on the laptop goes black with a lot of scrolling text then it freezes.
This worked out of the box without any problems with 10.10.
View 3 Replies
View Related
Nov 5, 2009
I was trying to install the android sdk so I can write some apps and play around on a new droid phone i hope to get tomorrow. I had 64bit FC11 installed but the android stuff is only 32bit. I needed to install a bunch of the 32bit libs to get this to work. I installed FC11 64 bit. This cuased problems because the android stuff is 32bit. I couldn't get it to launch so I had to install the 32 bit libraries as well. A lot of the libraries could be removed but I think they will be helpful and useful in other stuff as well.
After installing these just follow the normal android install. I had another problem with the android install because the Ganymede Update Site was not checked so it wouldn't download the updates for the eclipse software. In the Software Updates and Addons window click Manage Sites, check Ganymede Update Site. Here is the link if you have to add it.[URL]..# instruction to get 32 bit android stuff in 64 bit FC11 Add an "rpm" Macro. You'll need this later or it will be hard to tell your rpm versions apart.
Add the following line to the "/etc/rpm/macros" file:
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
Code:
[stoggy@localhost][~]
[10:13 AM]$: echo "%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}" | sudo tee -a /etc/rpm/macros
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
[Code]...
View 5 Replies
View Related
Oct 15, 2010
The Motorola mounts in 10.04 but I can't tell the size of the available disc space so don't know if it's some internal memory or the 16 GB microSD card. It shows some files and a setup.exe so I suspect it's not the card and don't want to screw anything up.
View 2 Replies
View Related
Jan 13, 2011
All I want to do is transfer my pictures from my Motorola V3 RAZR to the Ubuntu 10.04 PC. Searching, I installed KMobileTools 0.4.3.3 from the "Ubuntu Software Center" as a Ubuntu 10.04 replacement for the Windows "Motorola Phone Tools". But when I attach my fully charged Motorola RAZR V3 to the Ubuntu 10.04 PC with a USB cable, I can't transfer my pictures from the phone to the PC using KMobileTools.
In fact, there doesn't even appear to be a MENU for transferring pictures from the Motorola RAZR V3 to the Ubuntu 10.04 PC in the KMobileTools application. What would you suggest for transferring pictures from the Motorola RAZR to the Ubuntu 10.04 Lucid PC?
View 5 Replies
View Related
May 1, 2011
My apartment management recently installed a new system so that I have to log-in every time I want to use the internet (wifi). It's kinda annoying because for some reason firefox doesn't offer to remember my username and password for this site. It's more annoying because when it opens a new window which has to be kept open while I use the internet, and after login redirects me to google.co.th, which I don't ever use.
Is there a script I could create which will login for me and handle this annoyance? It would make my daily life on computers just that little bit nicer.
View 4 Replies
View Related
Mar 15, 2011
I am re setting up a server of mine running red hat enterprise Linux server 6 and I had all of this working befor but for some reason I had troubles getting sasl to work and now when I login my smtp server I get an error stating that my username or password is incorrect though I am sure I am entering both correctly. Would anyone know what could be happening? I have been spending days on the web looking for the solution and only went from sasl not working when started as a service to this. For some reason I can't use Pam with saslauthd and had to use shadow instead of which from what I hear I get to use better methods of secure authentication with smtp
View 2 Replies
View Related
Jun 21, 2010
i wish to install hotspot shield so help me to install hotspot shield & send me the link of software hotspot shield.
View 3 Replies
View Related
Mar 19, 2010
I have an SSH server running on my netbook on port 2222 and a VNC server running on 5901. The router only has port 2222 open to the laptop.
I use Connectbot on the Droid to connect t my Ubuntu via 2222 with a local port forward enabled 5901 to 192.168.1.111 (laptop IP) port 5901.
Once the conenction is established, I use VNC viewer on the Droid and have it go to 127.0.0.1 port 5901 (to be forwarded by Connectbot over the SSH pipe).
I want to take it a step further. I want to administer my DGL-4500 router without having to remote control the laptop and open firefox. My router doesn't allow SSH.
An obvious solution (in my small mind) would be to install a simple web server process on say port 8080 and do a port forward on the phone to 8080. Then whenever that port is hit, I would want some process that would take the request and pop that person over to 192.168.1.1...
Any ideas on how I could do this OR a better idea on how to do it better without opening the router to the outside world?
I am theorizing I could do a VPN server instead and then find a VPN app. With a VPN, I am theorizing once again I owuld assume an IP address in my home network and then just type 192.168.1.1 on my phone and connect in that way?
View 3 Replies
View Related
Dec 6, 2010
I recently installed Ubuntu 10.10. I wanted to setup my droid incredible as a modem to connect via the builtin broadband connection under network manager. I searched around and found couple of ways using wvdial as well as a tunneling app. The funny thing is, that I was able to setup my phone as a usbserial device and use it ONCE to connect successfully via the built-in broadband connection setup method. But ever since, it has not worked . Currently I am running a fresh install of 10.10, and have tried to insert usbserial module for my phone in the kernel, but it does not work. The command I used :
Code:
sudo modprobe usbserial vendor=0x00b4 product=0x0ffb I have not made this change permanent though. But whenever I run this and connect my phone with broadband connect enabled, it recognizes my phone however it uses a 'generic' driver according to the logs, and it never lets me enable Broadband Connection or connect successfully.
View 1 Replies
View Related
Dec 28, 2010
World of Warcraft requires that TCP Ports 1119, 1120 and 3724 are forwarded. The Blizzard Downloader requires that TCP ports 3724, 1119, 4000, 6112, 6113 and 6114 are forwarded. It can also benefit from having ports 6881 through 6999 forwarded. The World of Warcraft Voice Chat feature uses UDP Port 3724.
i use the hotspot feature to play warcraft and i am running ubuntu 10.10 ... i need to forward these ports ... any way to easily download an app to configure the phone like you would a router? its probably easy i just cant find it.
View 2 Replies
View Related
Jul 1, 2011
I am running Debian 6.0.1a on a Gateway SX-2841 (64-bit) and I would like to set up the Motorola SBV5220 modem using USB because the Ethernet port is used for a LAN (not on Internet). I am trying to follow the Cable Modem HOWTO. /var/log/messages lists CONFIG_USB_NET_CDCETHER=m, not exactly as shown in the HOWTO. lsmod does not list anything like either CDCEther or usbnet. I am hesitant to try running modprobe until somebody says this is the right thing to do.
View 7 Replies
View Related
Dec 28, 2010
I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies
View Related
Feb 17, 2010
I occasionally stay at hotels where I get free wired internet but not wifi, I'd like to use my laptop as an access point so that I can have internet on my Ipod Touch. I know it's possible because after trying unsuccessfully in Ubuntu 9.04 a few times I decided to try it with windows vista and it took me a matter of seconds and both the laptop and ipod touch were surfing the internet. I'd prefer not to boot into windows just for this.
In ubuntu when I create a new wireless network, network manager shows that I'm connected to both the autoeth0 and the wireless network I created but neither computer has internet access.
View 2 Replies
View Related
Mar 5, 2010
Just found this I haven't tried it but going to give it a go.
[URL]
View 4 Replies
View Related
May 12, 2010
I've got an Ubuntu box set up as a router and wifi hotspot. I can access the internet and any website using this box. I can connect a laptop to my wifi access point, and connect to both the router box and the internet. I'm writing this message from it. If I access either hsbc Hong Kong internet banking or speedtest.net from my laptop I can't connect. Every other site I've tried is fine. What could be causing this? I don't know where to start. I've set up the firewall rules and routing tables, so I vaguely know what I'm doing... but clearly not enough to debug this issue.
View 3 Replies
View Related
Jun 15, 2010
I'm looking for an solution to get an automatic authentication and login to my FON hotspot. I did some search on this but I can't find an solution on this. Is there a way to get it work? I'm running on Ubuntu 10.04.
View 3 Replies
View Related
Sep 30, 2010
I am attempting to connect to an unsecured wireless network; I helped set it up for my local club with a local ISP. Once things were up and running I took my wife's laptop running Ubuntu 8.04.3 and Wicd. Can see the unsecured network no problem, good signal, hit connect, whirs away for awhile, then: 'Unable to obtain IP address.' Strange. I am about to give up and report back to the ISP when I think I might try one of the old Windows boxes in the computer room. Spots the network, hit connect, online, no problem.
So Windows connects fine, Ubuntu box can't get an IP though no doubt the router is trying to serve it one.
View 9 Replies
View Related
May 6, 2011
setting up a netbook's wireless access point (to allow remote connection to a network drive connected to the netbook). I know this sounds daft but there is a reason.I just switched workplace and have all my projects on one drive.However my new workplace's network only assigns ip to certain Mac addresses. So I can't just plug in the network drive.My new work desktop is MS loaded, warranty sticker sealed and shared so I can't change this.Well I will, but not in the first week.
The simplest solution I thought of was to bring in my ubuntu netbook connect this to the network drive and wirelessly connect the netbook to the new desktop this via a wireless USB dongle.I connected the netbook to the network drive with no problem using the wired card. I done this by adding
Code:
auto eth0
iface eth0 inet static
address 192.168.4.1
network 192.168.4.0
[code]....
For the wireless bit, on the netbook, I right clicked on the network indicator icon and selected "Create New Wireless network" then entered a network name and WEP passphase.Over to the desktop (XP). I plugged in a wireless dongle, get it load the driver then selected my new network and entered the passphrase. It came up connected and sure enough I check and it got assigned a sensible IP.
All seemed well and I even connected my android phone with no issues. The phone and desktop can ping each other. However for some reason I can't actually ping or ssh to or from the netbook.So whilst it's happily providing the wireless network it can't use it itself.
p.s. Incidentally I am allowed to plug in USB drives so this isn't an access issue or me trying to sneakily circumvent rules. I even told my IT department about the wireless dongle plan.
View 2 Replies
View Related
Jul 22, 2011
I connected a USB Wireless Dongle (Sapido AU-4512S) on my Ubuntu 10.04 64bit. I wanted to share my wired internet connection from my pc to my friend's laptop.
So, I did the following:
1. Installed ndiswrapper-utils, ndiswrapper-common and ndisgtk in Synaptic Package Manager.
2. Installed Windows 7 64bit driver of my USB Dongle through Wireless Network Drivers(ndisgtk)
3. Now it says, net8192su -- Hardware present: Yes
4. Created a Ad-hoc connection clicking on Network Manager > create new wireless network..
5. Edited the Name, set Security to WEP 128-bit Passphrase and entered my desired password.
6. Finally clicked Create but it says "Wireless Connection disconnected"
I'm thinking about maybe the problem is with my dongle so I checked by using the command:
Code:
which gives me information about wlan0
The next thing I did worsen the situation. I unplugged the USB dongle ang plugged it again. This time,
Code:
gives me no result anymore.
Code:
Also, the option that says "create new wireless connection" disappeared in my Network Manager Applet now.
Now I have no problem. To restore the "Create new wireless connection" in my Network Manager Applet and finally create a wifi hotspot using my wired connection from pc.
Code:
Code:
View 3 Replies
View Related
Mar 2, 2010
I blocked several ports to stop HOTSPOT-Shield. but it have a lot of ip address and ports. stop Hotspot shield on my LAN.
View 3 Replies
View Related
May 4, 2011
I installed everything and am running android OS on Ubuntu (using androidphonedriver guide). The problem I'm having now is that I don't know how to install android market application to be able to install other apps like opera etc.).
View 1 Replies
View Related
Aug 17, 2010
My school has (once again) chosen to change their wireless network. This means it has gotten a lot slower, and that only our hotspot works. Our hotspot however is secured so that im unable to enter facebook, and a lot of other websites, etc. So what i did in windows was installing a program called hotspot shield, which redirects you ip through a server, so the LAN Admin basically have no control of what you're doing if he haven't got more skill than the one we have. I think what Hotspot shield does is making a vpn connection (correct me if im wrong) and i would certainly like to do that i ubuntu as well.
View 1 Replies
View Related
Jan 12, 2011
ubunut 10.04, does anybody know how i can turn my ubuntu laptop into a wifi hotspot?
View 1 Replies
View Related
