Ubuntu Multimedia :: .ogv Conversion For Moto Droid?
Sep 25, 2010I'm trying to figure out how to convert .ogv video files to put on my moto droid. Has anyone did this? How??
View 1 RepliesI'm trying to figure out how to convert .ogv video files to put on my moto droid. Has anyone did this? How??
View 1 RepliesI'm using Rhythmbox to manage my music collection. I have ripped my CDs into FLAC files. I'm using the Motorola Milestone (The Droid) as my music player and syncing it using Rhythmbox.
Now, when I transfer my music files from Rhythmbox to the Milestone, it automatically convert the FLAC files to MP3. But the conversion is set to 128Kps.
How do I change this default conversion rate? Or even, how do I change to another conversion format altogether?
Can anyone tell me how to rip a DVD so that it will play properly on a droid X?
View 3 Replies View RelatedI have generated some .eps figure which I needed to show one by one. I converted them using convert file.eps file.jpg but the generated files were kind of blurred (not much, but they are not of the same quality as the .eps files) Is there anything to do to get a good conversion? Also, which is better, is/are there any image viewer package that would help show the .eps files as .jpg files? I have tried, gthumb, gqview, f-spot, image magic (display).
View 8 Replies View RelatedGot some TV progs in MKV format which are jumpy when played through VLC. Other shows in the series AVI format play OK.
Are there any open source programs out there that can convert MKV to AVI?
Is there any software out there to convert *.mov files (from a digital camera) to *.mpg files, of which way I have to go?
View 2 Replies View RelatedI recently upgraded to Ubuntu 10.04 and recorded a screencast with gtk-recordMyDesktop. Upon completion of the recording I attempted to convert the OGV file to an AVI, for ease of editing purposes, using WinFF.(And yes, I have installed libavcodec-unstripped-52) The result was an incredibly annoying error message Which stated:
Code:
FFmpeg version SVN-r19352-4:0.5+svn20090706-2ubuntu2.2, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5+svn20090706-2ubuntu2.2 --prefix=/usr --enable-
[code]....
It seems more and more people are encoding with the MKV container on bit torrent these days, and a lot of the shows I'm watching are starting to release almost exclusively with .mkv formatted videos. This is not a problem if I want to watch the shows on my computer but I've become accustomed to watching them on my PlayStation3 using my thumb drive. It seems the offical documentation for the PS3 includes a list of supported codecs [URL], but when I use FFMPEG to convert with libxvid video and aac audio in the MP4 container my PS3 says the output video is not supported. I've also tried most combinations of libxvid, libx264, mpeg4 for -vcodec and aac, libmp3lame for -acodec in several different container formats but nothing seems to work. I have found one option that always works:
Code:
ffmpeg -i inputfile.mkv -sameq -ac 2 outputfile.mpeg
I don't like doing it this way, however, as the output file is twice the size and the audio quality is terrible. If I don't reduce the audio channels to only two using -ac 2 FFMPEG throws an error (apparently MKV audio supports 6 channels). And preserving the video quality in MPEG video using -sameq produces too a large file (and I prefer to keep my files as lossless as possible). Ideally I want to save the files on an external HD I have but if a single episode of a show is 1.5 GB it's not very pratical.
Anyway, the PS3 docs say it supports h264 and xvid with aac audio, but apparently I'm doing something wrong. Has anyone sucessfully used FFMPEG to convert an MKV to MP4 for use on a PS3?
I've been trying out a few scripts (I hacked one myself) to convert HD MKV files to MP4 containers. Specifically, the main issue I'm trying to solve is converting DTS -> AAC audio. I noticed the scripts I used before used ffmpeg. I tried NeroAacEnc and found the audio quality is much better. Unfortunately, I'm having issues with MP4Box accepting the audio NeroAacEnc creates. I also hit one other issue and that is making sure HxW size of video is in multiples of 16. I was trying to use ffmpeg pad filter for that but couldn't figure it out.
View 1 Replies View RelatedI am Ubuntu user, having only recently left the stinking, bloated corpse that is Windows ($225 for an upgrade to Win7 is just obscene). I have a huge library of Mp3's, which I have managed to enable support for on Ubuntu, and have installed Amarok, as I didn't think much of rythmbox.
So far so good, but I still need a program to rip/convert the rest of my CD's, and to convert lossless files. I'm looking for a CD ripper with similar functionality to EAC (Exact Audio Copy). One aspect I am looking for is the ability to manually change the Mp3 encoder used by the program. I am partial to the lame 3.98 encoder, and would like to keep using it. If the program already uses this encoder (or a close version), then that's fine and no need for the ability to manually change the encoder.
So I typically use cat to put my avi files together.. but today I figure lets see about ripping over so I can watch on my Droid.
As nobody has a xvid or vlc player on the droid (yet.. coders are doing alot for Android ya know) I will have to convert the video down and change the format.. So.. can anybody tell me a mencoder command line directive to get as close to this as possible (I found ipod settings leave the actual video lacking).
Video
Format MP4
Encoder H.264
Resolution 854 x 480 (or 720 x 480; 480 x 320; 320 x 240)
Frame Rate 12 fps - 30 fps
[Code]....
Using Miksoft's Mobile Media Converter, and I cannot convert files to MPEG4.[URL]Converting to MPEG1/2 works fine, but trying to convert video for my son's PSP always produces an error. Here's the output:
Code:
>> Command executed:
"/opt/MIKSOFT/MobileMediaConverter/lib/mencoder" -oac lavc -ovc lavc -of lavf -lavcopts
[code]....
With Banshee, I am easily able to put music onto my iPod and have it convert my FLAC to something that the iPod can read. But is there a way to control the quality of the conversion. I don't really want my FLAC to go down to like 192kbps. Are there any settings that I am missing or any files that could be edited to make this happen?
View 4 Replies View RelatedDoes anyone know what I should do to read a dvd disc that I recorded on my dvd recorder off the satellite decoder. When I look in winxp it shows the contents which is only a video_ts folder and no audio folder. Inserting the same into the pc with ubuntu 9.10 running the drive reads the disc but I then cannot access the contents, which I want to convert to a divx file or similar. Will I have to use my Windows system for this?
View 1 Replies View RelatedIs it possible to convert a 2.1 channel mp3 or any video file to get a respective 5.1 file permanently so I could play them on external music system which is 5.1 speaker system. Any sites where i can usually songs n video with 5.1 channel.
View 2 Replies View RelatedI had some success with handrake to rip dvd's in older versions of ubuntu. i now have a clean install of 10.10 and know that handbrake is not compatible (even tried the ppa of the nighly builds without success). In looking for alternatives, i cam across arista transcoder....which seems perfect for my needs (simple), but whenever i put a dvd in the queue its gives me an error that says conversion failed....no valid dvd title found. this happens no matter what dvd i use and no matter what preset i choose.
View 2 Replies View RelatedI have some downloaded files of radio programme from BBC which are .aac. I have never come across this type before. Googled it so now I am a bit wiser and VLC seems to play them without problem but they are not accepted by my upnp client devices which are happier with flac or mp3. I would prefer flac but what is the preferred conversion software.
View 3 Replies View RelatedI spent about a half hour wrestling with different website tutorials about how to convert a file with ffmpeg and figuring out how to get all the video quality options right. Then I discovered you can just use the -sameq option and it figures it all out for you if you don't want to change the vid quality but just want it in another format. Thought I'd leave this on the site in case anyone else finds himself in the same boat.
View 1 Replies View Relatedi am using ubuntu lucid now and using ubuntu for 2years now.except nokia pc-suite i do not miss other s/w for windows.i tried to convert audio and video for using in nokia 5800,but i am not very successful mainly due to my inexperience.i installed winff and ffmpeg and searched a bit in this forum.found a few guides but mostly the converted files shows 'unable to play video or audio' in nokia 5800.
Code:
-r 29.97 -vcodec libxvid -vtag XVID -s 400x240 -aspect 16:9 -maxrate 1200k -b 1200k -qmin 3 -qmax 5 -bufsize 4096 -mbd 2 -bf 2 -flags +4mv -trellis -aic -cmp 2 -subcmp 2 -g 300 -acodec libmp3lame -ar 44100 -ab 160k -ac 2 -async1
this is the example of wiff preset command for nokian810(but not working for me).apparently there is no need for -i or output file(and here i get confused from the command lines posted in the forum.
[Code]....
I think that the biggest problem that I have had is that some of the music (and audio books) that I have gotten have not played on my walkman, or have not been able to be downloaded in to I-tunes.
First: I hate itunes... I only try to make it work because I love my wife. (and do not want her to hit me)
Second: I know that my Walkman has a very limited range of files that it can play, so I will need to convert some types of files.
But my basic questions:
* How can I figure out what format a file is in?
* Below that, how can I identify the singular characteristics of a file? (bit rate, and other formats...)
* Is there a best way to switch the formats or format options of these files. (I am currently using sox to do this, it seems to very complete)
Basically. I know nothing! The most that I do not know is that two files that as far as I can tell have the same formats, and should work the same never the less, one of them works, the other does not. I am looking to figure out a way to look at these files (maybe they are mislabeled) and figure out what their real format is (and a more complete format than just being MP3 or such) and then to be able to convert it in to a format that is able to be used by myself and/or my wife.
I recently found how to ssh into my ubuntu system with my droid, but I can't seemed to do it the other way around, even if my droid is running off my wireless with the same ip (maybe that's the problem?).
View 1 Replies View RelatedI can sync my Motorola Droid using the USB cable without any problems but I don't always have the USB cable with me and I haven't been able to sync my Droid using bluetooth. My laptop can see the Droid and the Droid can see my computer but it says on my Droid "Paired but not connected". All I want to do is send files back and forth (tethering would be nice but I don't really need to be able to do that).
I can now (I'm really not sure why) send files from my laptop running Ubuntu 9.10 to my Droid but I can't send files from my Droid to my Laptop. Also when I try to "Browse file on device" I don't see any devices even when I select phone as device type.
I've tried what seems to be the best music software. Banshee and Amarok seem to be the most popular and I can't get either to sync. Banshee doesn't do it properly, it "syncs" but roughly 1/3 of the songs don't show up. I believe this to be due to the Amazonmp3 folder which I did move everything out of. Next I tried Amarok. I guess it's a bad case of user error because I can't even figure out how to sync it at all. All I know of right now is to manually create the m3u file in gedit. 11.4 btw and it's a droidX
View 1 Replies View RelatedI'm new to android app development (but not to java) and I want to transfer apps I create on ubuntu to my HTC Incredible mobile phone. My computer's a desktop, so I don't have anything fancy like a bluetooth (unless you recommend I buy a USB one for this). What is the best way to transfer apps to my droid?
I tried using USB, but for some reason neither Ubuntu nor my droid sees the other. It doesn't even charge when I connect it via USB.
I have an SSH server running on my netbook on port 2222 and a VNC server running on 5901. The router only has port 2222 open to the laptop.
I use Connectbot on the Droid to connect t my Ubuntu via 2222 with a local port forward enabled 5901 to 192.168.1.111 (laptop IP) port 5901.
Once the conenction is established, I use VNC viewer on the Droid and have it go to 127.0.0.1 port 5901 (to be forwarded by Connectbot over the SSH pipe).
I want to take it a step further. I want to administer my DGL-4500 router without having to remote control the laptop and open firefox. My router doesn't allow SSH.
An obvious solution (in my small mind) would be to install a simple web server process on say port 8080 and do a port forward on the phone to 8080. Then whenever that port is hit, I would want some process that would take the request and pop that person over to 192.168.1.1...
Any ideas on how I could do this OR a better idea on how to do it better without opening the router to the outside world?
I am theorizing I could do a VPN server instead and then find a VPN app. With a VPN, I am theorizing once again I owuld assume an IP address in my home network and then just type 192.168.1.1 on my phone and connect in that way?
I recently installed Ubuntu 10.10. I wanted to setup my droid incredible as a modem to connect via the builtin broadband connection under network manager. I searched around and found couple of ways using wvdial as well as a tunneling app. The funny thing is, that I was able to setup my phone as a usbserial device and use it ONCE to connect successfully via the built-in broadband connection setup method. But ever since, it has not worked . Currently I am running a fresh install of 10.10, and have tried to insert usbserial module for my phone in the kernel, but it does not work. The command I used :
Code:
sudo modprobe usbserial vendor=0x00b4 product=0x0ffb I have not made this change permanent though. But whenever I run this and connect my phone with broadband connect enabled, it recognizes my phone however it uses a 'generic' driver according to the logs, and it never lets me enable Broadband Connection or connect successfully.
Linux for starters, have used this link to help set up the phones tethering using wired cable the computer is old with no wireless and it is integrated into the motherboard so dont flame about spending 20 bucks on a wireless card please. Now, we can start tunneling betwwen your computer and your phone. Change directory to the tools subdirectory of the extracted Android SDK directory. Issue the command ./adb forward tcp:8080 tcp:8080... everything went smooth until here ... there doesnt appear to be a filenamed ./adb so i cant move on and dont know where to go from here.
it is worth noting i am a noob to android sdk and i think i need to set somemore up to get it to work right you download a starter package and the rest you reach out and grab with the starter package although i dont know where tostart there either.
World of Warcraft requires that TCP Ports 1119, 1120 and 3724 are forwarded. The Blizzard Downloader requires that TCP ports 3724, 1119, 4000, 6112, 6113 and 6114 are forwarded. It can also benefit from having ports 6881 through 6999 forwarded. The World of Warcraft Voice Chat feature uses UDP Port 3724.
i use the hotspot feature to play warcraft and i am running ubuntu 10.10 ... i need to forward these ports ... any way to easily download an app to configure the phone like you would a router? its probably easy i just cant find it.
Sony Vaio X upgraded to 11.04 with 2.6.38-8-generic i686 which improved some features but which introduced a serious WiFi problem: while other WiFi works well, connecting via my Droid hotpsot fails consistently despite reboots of everything and renaming of SSID. Another laptop running 10.04 still works fine with the Droid hotspot. One hint: upon upgrading, there was the warning that the laptop hardware did not support Unity and I always get the classic Gnome display.The Droid hotspot shows up in the list of SSIDs but attempts to connect always fail, even when it is made totally unsecured.
Atheros AR9285 Wireless Network Adapter
Qualcom Sony Gobi 2000 Wireless Modem
ifconfig shows no packets with wlan0 or any connectivity.
iwconfig shows correct SSID and other info.
[code]....
Gonna try and switch to a lixun distro.... but want to make sure I can still do these:TorrentingInternetTether with my droid to be abel to play PS3Also my wife loves little games like cards, bejewled etc.. I heard linux has a lot of free games?
View 2 Replies View Related