When I try to load Ubuntu (recovery mode) or if I press Ctrl+Alt+F1, the image gets corrupted showing a white screen with black writing on it, but which is unreadable. Also the words seem to be spelled backwards. I'm trying to install an NVIDIA driver and I need to stop first the X server.
View 6 Replies
I'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.
EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of รง I get a weird symbol.
My computer isn't booting up or logging in, period, and I was wondering if I could run any of those Grub fixes if I downloaded it through the console. Can I run anything online besides yum using the console? I have a 4 gig USB Flash drive if necessary.
View 4 Replies View RelatedI run a custom build of linux running kernel 2.6.24 and busybox. At the moment I'm investigating a kernel panic. The problem is that after 10 minutes the screen is blanked, i.e. it is still on but has been turned black. If you press a key then the command prompt is shown once again, but if the kernel has crashed then this won't work and any info about the panic is inaccessible. So I'd like to prevent the display being blanked. I've tried booting with 'apm=off' and 'apm=off acpi=on' kernel parameters but neither had any effect.
View 5 Replies View RelatedHow to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.
The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?
I`m looking for a a X-Window in CentOS. At the moment I work with console only in text mode
View 2 Replies View RelatedI've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
View 2 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedI'm using Slackware 13.1.
Whenever I logout of KDE and go back into console mode, the characters at the console screen become unreadable gibberish. Is anyone else having this problem?
I can ctl+alt+F? to work at another console screen, but the ctl+alt+F1 screen remains unreadable until I reboot.
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies View RelatedI've recently installed the program Sparky for processing NMR data. When I start the program the text is unreadable. For example the top left pull-down should be labeled 'File' and instead I only see the two horizontal dashes in the 'F' and the right 2/3 of the 'e'. Yet the banners above the windows are completely normal. I have occasionally had similar problems with Matlab, but it's intermitant and less severe
View 1 Replies View RelatedHave recently installed 10.10 x64 on Gigabyte H55M-D2h/Intel i5/4GB/Onboard graphics&sound and have trouble with some text display. When hovering over some apps, the "help" dialogues appear as black on black, and same for some right/left click dialogue boxes.
View 1 Replies View RelatedKubuntu10.10After installing a 6000+ font collection from KDE-Look.org, my computer had assumed a new font, though I restarted and it is now fine, generally speaking. My Firefox still has this crazy font, and it is so weird that it is almost unreadable.
View 12 Replies View RelatedMy old desktop had a power supply that was going bad, so instead of replacing it again I decided to buy a new PC Desktop. So I ordered from TigerDirect.com and got a grodd AMD computer without a operating system on it as I didn't want that Windows 7 scheisse on it. So I downloaded SuSe 11.4 64 bit, and installed it last night.
At this point I will tell you the new PC has an NVIDIA GeForce 61100 GPU for graphics with 128 mb memory. Also I use an HP W2007 wide display monitor running 1680 by 1050 resolution, that I got over 3 years ago when I was running SuSe 10.2.
So during installation last night of 11.4 when it did the first boot after install, is when I first saw the symptom which is an illegible white screen, with about 100 3 mm lines on it. So I shut down, rebooted and brought it up safe mode and all is fine. The error screen only appears if I boot GRUB with the Desktop or Xen option and only when the boot would switch to display my desktop.
I recall a similar illegible video monitor issue when I first got the display over 3 years ago, and fixed it by changing a SuSe video configuration option, but being I am getting old and I didn't write down what the configuration file was I am at a loss. All my previous SuSe installations never had a problem as I would always choose the Update rather than new install option thus that configuration file was brought across the many releases installations. This video configuration parameter had the monitor resolution sizes in it.
I am running Fedora 14 with the Gnome. The screen size defaulted to 1680 x 1240 mething like that.This was rather small for me so I went to the task bar and clicked on system.ound the app to change the resolution. I chose 1280 x 720. Now, I no longer have the task bar and the text is nearly unreadable.Without the task bar, I cannot find a way to go back to the original size. I also have not had any success finding any way to make the text look better. I tried changing the font and size but that did not have any beneficial affect. Can anyone tell me what will correct the situation?I found another post that mentioned Alt F2 and gnome-display-properties. That let me get back to nearly what I originally had; everything looks good at 1680 x 1050 but the fonts are not quite the same. However, I still have the need to reduce the resolution of the display and maintain readable text and the task bar.
View 1 Replies View RelatedI'm having a strange problem with gvim. I've installed Slackware on 4 computers now, and this latest one is the first I've seen this issue on. I use the command line for almost everything, and only use gvim in Firefox with Vimperator. So it isn't something I use all the time, but when I need it I really need it. Using textboxes (like, you know, on LQ) is starting to drive me up the wall Anyway, when I load gvim (through Vimperatorr other means) the text is unreadable. It does seem to become readable after it gets covered by another window, but as I type, the new text is unreadable again. Attached is a screenshot, of this post. And, actually, I'm seeing similar behaviour in Gimp.Attached is a second screenshot. The weird lines seem to appear and disappear when the mouse rolls over the area. I don't use very many GUI programs, just Firefox for the most part (which isn't displaying this behaviour). So, this could be a general X issue, or perhaps a WM issue.
View 1 Replies View RelatedMy terminal text is unreadable. Where as the default output would usually fill half the screen it probably fills around 1/20th now. Basically it looks like the text is 1px in size. I was about to install a graphics driver (nvidia) but doh I can't see what I'm typing... I can't start gdm even after memorising the process of logging in and starting gdm (I think gdm is failing to start anyway) I'm using the default xorg.conf provided with the LiveCD;
[Code]....
I have a Slackware install with an NVidia graphics card.It was working ok, but now the graphics screen is unreadable and the keyboard stops working (capslock and numlock lights don't operate) when the graphics display is started.Deleting /etc/X11/xorg.conf allows me to run "startx" and see the icons, but keyboard input is still lost.
View 2 Replies View RelatedI've just installed Ubuntu 10.04 alongside Win XP. I can boot into both fine. However, I no longer see the Win XP boot menu that allowed me to go into the Windows Recovery Console if I needed it. Previously with Ubuntu 8 & 9 this was briefly available after selecting the Win XP option from the grub menu, but not any more. How do I get it back?
View 2 Replies View RelatedI have seen a hundred post to just boot into the Recovery console and reset the users password, but when I do it asks for a password before I can do anything. I know there are Windows Password hack utilities, are there any for Linux/Ubuntu? Any other options? Can I use a live cd to access the config file or something?
View 9 Replies View RelatedI upgraded on Thursday to Natty
I was using Classic - no effects
I allowed an update today and now when I boot I can only get to recovery console
If I select Ubuntu Classic I get
Quote:
failed to load session "classic-gnome"
I don't really want to do a complete install
Yes thats right. Last night I changed my logon password for better security. (have a feeling my flatmate knows it). When I tried to log in today, it wouldn't accept my password. No I know that I got it correct. I know this for a fact. So after a few tries, I decided stuff this, I am going to reset it using recovery console. But the recovery console just hangs with the following on the screen:
[4.1098198] Console: switching to colour frame buffer device 100x30
I can ctrl+alt f2, and I just get a flashing cursor. So that's it then. My ubuntu box is hosed and I am about twenty minutes away from formatting and starting again. 6 months of schoolwork, designs for architectural competitions etc all gone.
I'm having an issue with LVM on an external USB drive. When booting, the system drops into a recovery console if the external drive is not powered on because it cannot find the volume group and members. The setup is one system drive with fedora 12 installed, one internal data drive; LVM volume group vg1 with 5 partitions and one external backup drive LVM volume group vg2 with 5 partitions. Both the data drive and external backup are the same size and identical layout.
I use an rsync script that I wrote to execute backups (mirroring actually).
fstab is set 'noauto' on the external partitions.
I am new to LVM and I'm stumped as how to make the system 'ignore' the external drive at boot, if not powered on.
My dad has done something to his comp and it won't boot. it stops on boot up an comes up with some sort of black screen command line. he said its something along the lines of "initramfs" and he can't seem to do anything. We tried booting to the recovery console from the grub menu and gets the same response.
Hes having trouble booting to cd at the moment so I need to know is there some sort of command that will fix or at least give some help that he can type in from this spot.
I set the default login to recovery console on the login screen options. Now I am stuck at the recovery console and don't know how to change the settings on the terminal screen to get back to desktop.
Ubunutu 10.10
2.6.35-generic
No grub screen at startup
auto-login to user account
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedHow do I get int recovery mode in Ubuntu 10.04?
View 2 Replies View Relatedok so i have been haviung the same problem for a while now and it is starting to **** me off, with every distribution of ubuntu i am getting thuis stupid message when i log in it is ionoly every once i a while that i get it but saince i have upgraded to 220.04 cannot fix it. i could fix it befor pretty easily, the probklem is when i get t o the login screen i get this generic login menu whne i attept to login i get this message somethiung like power management is not installed correctly. like i said b4 it was easy to fix, all i would do is to go to the ubuntu recovery thing, which is apparently not available ion 10.04 it does not evn give me a choice which to boot how do i get to recover mode in ubuntu 10.04?
View 2 Replies View Relatedrecovering a partial upgrade to Lucid.
4 core Xeon , was running 64 bit 9.10.
Upgrading over the weekend, but it failed, and suggested running dpkg-reconfigure -a
I couldn't launch any terminal/xterm windows, and couldn't login via ssh (kicked me out with xmalloc failure) or through a virtual console (showed garbled characters)
So I had to reboot.
Now the boot process -- I've tried recovery mode for all othe kernels I've got installed, but all fail in the same way:
Code:
Begin: Starting AppArmor profiles...
bash: xmalloc: ../bash/locale.c:73: cannot allotate 225469542417 bytes (0 bytes allocated)
Failure: AppArmor profiles failed to load.
[Code]....
It looks like it might be a libc problem. At any rate, I'd like to get into a recovery console to restart the update.
I run 9.10 from a live usb with persistece, and got /etc/sudoers awfully messed up. now i'm told to fix in through 'recovery mode', but i don't think live usb has one. is that true? what about my sudoers? is there another way to fix it?
View 3 Replies View Related
