Running ubuntu 10.04.The sound works perfectly when I first boot the computer.hen when I go idle and come back a few hours later, it stops working.Not sure why. Also, another side effect I noticed is that video sometimes fails to play after the sound has stopped working.Killing pulseaudio will restore video playback, but restarting does not restore sound.
View 1 Replies
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
It has to be an update or something that cause this. I've done nothing differently from the other days I use this laptop. I have to keep relogging every now and then because the sound stopped working. I can turn the volume up but pidginrhythmbox, nothing makes noise anymore. it's random...it just started happening today and this is the second time the music went out. anyone have any idea of how to stop this from happening in the future?
View 9 Replies View RelatedI am unsure if this is a hardware problem or a linux problem. My machine is only 3 months old so it is not the fan. I didn't have problems until recently, and after the latest kernel update it got worse - having to restart more frequently.
I do not experience the fan turning off in windows. I use thinkfan when I have to but it isn't a very good program for an every day basis. The fact I can force start the fan with thinkfan when it turns off leads me to believe it is a kernel issue.
v been trying to fix this for a few days now, and the stress has been building up. I have searched for hours on end trying to fix my sound, and If i can't fix it soon ill have to spend another few hours going back to Windows XP even though i wiped my harddrive for Linux Ubuntu 9.1.My issue is, that my sound changes from what it should be, to a dummy stereo output sound. Which i dont know how to fix. I'd be incredibly happy if someone could give me a link to a tutorial for dummys,
View 9 Replies View RelatedI am running Ubuntu 9.10 on an HP dc5100MT workstation. Sound works nearly all the time, but once in a while, the sound stops and I have no idea why. The channel is not muted, the volume is 100%, and not even rebooting fixes it. It will just start working on its own.Under the Sound Preferences panel, the output volume is 100%. The channel is not muted. I can get sound out of the internal speaker by changing the connector to "Analog Output (LFE) / No Amplifier", but not out of the "Analog Output / Amplifier" which is the green sound cable plugged into the sound card.I only use this machine as a video player using VLCNothing else.I would like to know some tricks to isolate and troubleshoot this when it happens.
View 2 Replies View RelatedMy problem is this: when I suspend, sound disappears, and I have to reboot to get it back, which is, needless to say, rather annoying. I'm using Ubuntu 11.04, with a low-latency kernel.
I have three sound cards:
1) Delta 1010LT, which uses snd_ice1712
2) Sound Blaster Audigy 2, which uses snd_emu10k1
3) Some on-board Realtek thingy, which I guess uses snd_hda_codec_realtek
I use jack on the Delta1010LT, and I run pulseaudio through jack.
When, after a suspend, I try to restart jack via qjackct, it gives up and prompt the following:
Code:
Acquire audio card Audio1
creating alsa driver ... hw:M1010LT|hw:M1010LT|128|2|44100|0|0|nomon|swmeter|-|32bit
Using ALSA driver ICE1712 running on card 1 - M Audio Delta 1010LT at 0xec00, irq 16
configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 2 periods
code....
So when I try to move the home directory to another point, the sound stops working magically. Well actually the sound still works, but the controls don't work. Here is what I am trying to do.
My home directory is currently at /home/user I want it in another independent partition so I copy all the contents from /home/user to /dev/sda5 and then I mount /dev/sda5 to /home/user with rw permissions. Everything works perfectly, even my mozilla profile is copied and such, but the sound somehow disappears. When I comment out the line from fstab that mounts the the filesystem at /home/user, naturally things go back to normal because my folder at /home/user that was earlier becomes my home again. Things are working again. I can go back and forth, doesn't help.
Here are the specs, though they are irrelevant as everything including the sound works as long as I don't try to change my home dir. I'm using a Thinkpad T410. The destination filesystem btw is ntfs for my home directory, I know it's not suggested and most of you here will feel like lecturing me on how i shouldn't be using ntfs, but the point is I want to have my "Desktop" "Documents" "Pictures" "Videos" "Downloads" and everything in the same place for both windows and linux. So if moving the home directory to NTFS is strongly unadvisable, let me know how to move each of these folders to a desirable location. Here's what lspci has to say about audio device.
Quote:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
As the title implies, the sound on my rig stops working after a while. Annoying as hell: I have to reboot my machine to get it to work again, which means that I have to reset my entire programming environment (with five full workspaces). I'm running 9.10 Karmic.
View 1 Replies View RelatedI'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?
I would like to have a way to keep track of my working hours easily.
Insert arrival and finish times and have the difference in decimal. For example, if I start at 8:00 and finish at 9:30, 1.5 should be added.
I tried to do this with Calc but couldn't figure it out. I set one column to have entrance time, another one to have exit time and a third one with the difference("=B2-C2"). The result is in a timestamp format and not decimal. If I use another cell to say something like HOURS(D2) it rounds the number rather than give a decimal(would give 9 for 9:20:00).
EDIT: solved by doing =24*(B2-C2)
this problem is quiet enoying, so i hope that somebody can help me tracking down this problem and find a solution. When i open vlc or exaile and queue a list of tracks, after playing some hours, the sound hangs and in the music player repeats the same 1 second audio part like a hickup, in video programs like vlc also the film freezes.
i have the latest libraries of gstreamer from packman installed and i also tried updating the pulseaudio libraries from multimedia repo. but the problem is still the same
I am using Ubuntu 10.04.I always liked Evolution as a potential email client. I needed was for Evolution to automatically update the server (so if I mark a message as unread, it reflects at the server without having to wait for the 'synchronise every X minutes' to kick in).My email is with GMail. I understand Evolution implemented IMAP IDLE as of 2.30. So I tried this by using a PPA (ppa:jacob/evo230) to update. The update worked and I changed my email to IMAP+ and even checked the �Use idle if the server supports it�. But no auto sync occurs!
View 3 Replies View RelatedI can frequently hear a short clicking sound emanating from my hard disk. This only seems to happen whilst it is idle. (I don't get this sound when booting to windows vista).
View 8 Replies View RelatedWhy there is too much error in every version of gnome-shell and after everything slows down after a few hours of working in gnome-shell on debian(only on debian, i'm using gnome-shell in fedora and excellent experience i had in it) some of syslog output :
# tail -f /var/log/syslog
Aug 30 21:20:38 ali-deb gnome-session[8351]: (gnome-shell:8495): GLib-GObject-CRITICAL **: g_object_set: assertion 'G_IS_OBJECT (object)' failed
Aug 30 21:20:38 ali-deb gnome-session[8351]: (gnome-shell:8495): GLib-GObject-CRITICAL **: g_object_set: assertion 'G_IS_OBJECT (object)' failed
Aug 30 21:20:38 ali-deb gnome-session[8351]: (gnome-shell:8495): Clutter-CRITICAL **: clutter_layout_manager_get_child_meta: assertion 'CLUTTER_IS_LAYOUT_MANAGER (manager)' failed
[Code] .....
My hard drive all of a sudden starts to read and write all on its own for around 15 seconds at a time while at idle or while I am just browsing the net. At first I thought it was from cron running but I have that disabled.
View 3 Replies View RelatedWhen I run top d 0.5 on my machine and I press 1 to enable the SMP View, I notice that all of the CPUs keep toggling between 100%idle and 0% idle.
The odd part is that when a CPU goes to 0.0% idle, I would expect to see one or more of the other columns peek, but they are not.
What is causing this?
Code:
I am running Ubuntu 10.04 on an AMD64 computer with an ATI Raedon x1250 graphics card.
Everything runs fine for about 3 hours, then it will randomly stop working.
Symptoms:
Mouse stops moving for 10 seconds.
Screen goes white.
Speakers start repeating last 10 seconds of whatever was playing.
Screen goes orange or purple with lines across it and random symbols...
At that point I hardware restart my computer and all is fine again
dmesg yields the following after every crash
Quote:
Quote:
So I recently upgraded from 9.04 to 9.10 and then to 10.04, and I love it!
But there's only one key problem -- sound playback.
When I'm playing an mp3 file in rhythmbox, or any other player, it'll skip when I maximize or minimize windows, or do anything that really uses resources.
And on top of that, if I just let it keep going, it'll eventually just stop playing the song, and the progress bar will jump forward and do the same for other songs, not even playing them.
even songs on pandora.com skip, but don't stop playing
I've deduced that it's probably a sound driver thing. I've downloaded the driver for my card, but I the directions tell me to install it in
/usr/src/linux/driver/sound
Playing videos in ....., etc, is not working. The sound will play for around 30 seconds and then stop. The video will keep playing. I have installed Opera and Google Chrome and the same thing happens in those browsers as well. I have the latest flash plugin installed.when I switch to another user account on the same computer, the video plays just fine, with sound, all the way through.
View 5 Replies View RelatedOn my Acer laptop, I have Ubuntu 8.04.4 LTS and a static version of the Skype Beta 2.1, specifically version 2.1.0.81. I recently made the upgrade to it from an earlier version because I needed to have the screensharing feature to work. Previously Screensharing from others was showing up in a tiny window I couldn't resize. But the Skype Beta 2.1 works fine regarding screensharing.
But the problem I'm having now is that the sound intermittently goes away, but only for Skype. It seems to go away if I walk away from my laptop for a long time. When this occurs, I cannot hear or record sound through Skype, but it works fine through other applications. If I shut Skype back down once it is in this failed state, and come back in, then it remains in this failed state. The only resolution is a reboot, and then it's fine again.
The only thing I can think might be the issue is the Gnome Power Manager, perhaps? I mean, my fan on my laptop spins down if I walk away for a long time, so I know some kind of laptop power management is engaging.
I tried following this guide:
[URL]
And it suggested removing PulseAudio and using esound instead. Well, I tried that and rebooted, and my desktop wouldn't boot properly. So, I did CTRL+ALT+F2, logged in, and then did "sudo apt-get update; sudo apt-get install ubuntu-desktop". All was well again, but unfortunately it brought back PulseAudio again.
I've been running F12 x86_64 for almost a week now without significant issues, until now. I found this annoying problem with the audio system during video playback (both with VLC and with Kaffeine).It happens after a while playing a video: sound just stops (video continues). I found that sound is not dead though (can open Rhythmbox and music sounds).I discovered some system messages in /var/log/messages regarding this (attached).What could be happening
View 1 Replies View RelatedI have the strange problem that my sound and video stops sometimes when I'm not moving the mouse. As long as I keep moving the mouse there is no problem.
I am using
- Fedora 14
- 2 Sound cards (Internal Audio and Audio device on my Radeon HD 3600 video card, however this sound is not working)
i have fedora 14 and sometimes the sound on my laptop stops to work.e.g. lately it happened when some system sound occured (pidgin message sound) and flash video started at almost the same time (videos)by lost sound i mean i can play music in amarok and i don't hear anything.no sound from flash or system sounds. aplay or paplay is not heard.i tried to log out and log in (restart the desktop session)i had to reboot to fix it.i tried to do "pulseaudio --kill" but that did not helped.any idea what should be restarted in this cases?
code:
lsmod | grep snd
snd_hda_codec_nvhdmi 11784 1
[code]...
I have a fresh debian install on my computer, and I have this weird problem. When I play a song from rhythmbox, it works for 10 to 50 seconds, and then it stops making sound. When I type
alsa force-reload
It reloads alsa, and I can listen to a song again for approx 50 seconds. It is not depended of rhythmbox, because the same problem occures for amarock and banshee. I already installed the package libesd-alsa0 and put esd on, but the problem still occures. What is happening? I wanted to add 1 thing. And that is that I ahve 2 sound devices installed, both supporting alsa. 1 onboard, 1 pci card.
The strange thing is that only from the pci card, I can hear sound out of the speakers (after replugging the jack in the back off course ). But if, after an alsa force-reload, only the onboard sound card is detected, it does play the whole song, but does not output any sound.
After getting my computer to reboot properly, I noticed that SUSE will only play about half a second of my wav sound files and then stops. Is there anything I need to do?
View 6 Replies View RelatedI have a problem,I want to change the hour format from 24 hours to 12 hours, I cant find the way to do this,
View 14 Replies View RelatedI am experiencing sound problems after an upgrade to kernel 2.6.29.6-213.fc11.i686.PAE from kernel 2.6.29.5-191.fc11.i686.PAE in several games like Neverwinter Nights (linux binaries) and Warcraft III (PlayOnLinux). The sound stops and changes into a very choppy annoying sound. When I boot into the old kernel the problems are gone.
View 14 Replies View RelatedI have Ubuntu 9.10 installed on my laptop. The laptop has a single HDD with 2 partitions. Partition 1 has WindowsXP and partition 2 contains other data, among which the directory of the ubuntu installation. The partitions are formatted as NTFS. Ubuntu has been installed with wubi on the second partition. Ubuntu has been working fine for 2 days. Last night I updated the Ubuntu system and it required a restart. Needless to say, after the restart, grub wouldn't load. It just shows the shell.
I read the threads inside this forum and people usually manually select a kernel and boot up ubuntu, but when I do this, after I input all the commands I input "boot" and hit ENTER. The computer starts booting up until a point when it says ALERT! /host/ubuntu/disks/root.disk does not exist and something about using selection #1 and exits to shell (Easy Shell or Easy Boot, I can't remember exactly what it says... Easy something anyway) I've read that this is possibly caused by a NTFS dirty tag... but I do not see how to fix this problem.
I have read no fixes anywhere, oddly. This problem happened in 9.10 and seems to be back in 10.04. The fix on Ubuntu-Geek, which was re-posted various places, does not work either. However, I do know this is not a hardware issue... or think. I have a dual-boot with Windows 7 and it is not affected by this. Also, if I install anything 9.04 or earlier, this does not happen. Oddly, my netbook had 9.10 and now 10.04 but not this issue. Sadly I feel I must try other distros as this appears to be a Ubuntu specific error.
View 9 Replies View Related
