Ubuntu :: Unable To Mount IPhone 3GS Since Recent Updates
May 30, 2011
I was quite pleased to see that Ubuntu 11.04 now loads and reads the contents of my iPhone 3GS.
(Once I connect the phone to my netbook, Shotwell and Banshee would recognize the cell-phone and give me options to manage my data.Alas, that joy has been very short-lived. As of the most recent updates, something appears to have 'broken' this functionality. [TODAY's DATE: Monday, 30 May, 2011],
Now when I connect the phone Nautilus fails to mount it, and I consistently get the same error message:
"DBus error org.freedesktop.DBus.Error. NoReply:Message did not receive a reply (timeout by message bus)"
View 7 Replies
ADVERTISEMENT
Dec 2, 2010
I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!
Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?
View 1 Replies
View Related
Jan 6, 2011
I just installed Linux Mint Debian Edition on my friend's laptop. The biggest problem is getting his iPhone 4 to mount. On libimobiledevice.org it shows a cool video of a guy managing his iPhone with Linux thanks to libimobiledevice. libimobiledevice.org also says libimobiledevice supports the iPhone 4. But when he plugs it in, he gets an error that says:
Quote: Unable to mount location: Unhandled Lockdown error (-5) It's a serious issue and needs to be resolved ASAP. ***EDIT*** If this is a hardware topic, any mods can feel free to move it.
View 5 Replies
View Related
Mar 17, 2011
I have looked around and searched Google for a fix, but it's all explained really technically.explain in Newbie terms how to fix the iPhone mount error? I am on iOS 4.2.1.
View 2 Replies
View Related
Mar 17, 2011
I have looked around and searched Google for a fix, but it's all explained really technically.
how to fix the iPhone mount error? I am on iOS 4.2.1.
View 4 Replies
View Related
Aug 19, 2011
I have an iPhone 4 (iOS 4.3.5, factory unlocked, not jailbroken) and I wish to use it with Ubuntu 11.04.
However, I get the following error when I plug in my iPhone via USB:
Quote:
I tried this:
Code:
And rebooted. I still get the same error. My goal is to be able to use iFuse (unless there's another program which anyone recommends using for iPhone).
View 1 Replies
View Related
Apr 25, 2011
"Unable to mount iPhone DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered" The above error appears upon plugging in my iPhone 3GS using a USB connection on Ubuntu 10.04. Attempting to transfer tracks to the iPhone (using Rythmbox) results in this error: "Error Transferring Track Error while getting peer-to-peer dbus connection: The name :1.140 was not provided by any .service files"
The interesting part is that I can unmount the iPhone get back into Nautilus and the iPhone icon will still be there on the left side pane. Unmounting from Nautilus does not get rid of the iPhone icon until I physically disconnect the USB cable from the iPhone. Clicking on the unmount/eject icon next to the iPhone icon in Nautilus removes the unmount/eject icon, but it does not remove the iPhone from the left side pane. My other USB devices, such as the 2TB external iOmega hard drive, exhibit identical behavior. I'm guessing that this is a gvfs bug since it appears very similar to other gvfs bugs that I've found from a couple of years ago. I am using gvfs 1.6.2-1ubuntu1~ppa1.
My iPhone used to sync work perfectly using this same Ubuntu PC as late as November 2010. There were no changes made to the iPhone, only updates to Ubuntu -- I'd like to emphasize updates; no new software was installed on this Ubuntu PC.
View 5 Replies
View Related
Jun 28, 2011
After applying Ubuntu updates i am now unable to mount volumes it tells me that i am denied.I have checked my user permissions and i am allowed to mount. I have also downgraded MountAll to no avail.
View 6 Replies
View Related
Jan 3, 2010
After not having used Ubuntu for a few months now, I want to make up a new LiveCD and possibly a bootable USB. The times I have done this in the past, the installations don't include recent updates which need to be downloaded and installed once the system is running. (Understandably)
Two questions:
1) Does Ubuntu update the downloadable ISO periodically to include recent updates?
...for example: Now that it is January (ie. some 3 months after release of Karmic in October '09 and some 200-300Meg+ of updates required since that time), will I be downloading an ISO from Ubuntu that has recent updates already as part of it, or will it still require updates to be downloaded and installed once Ubuntu is running on the computer?
2) If the downloadable ISO has not been updated since Oct '09, is there a way of making a LiveCD/bootable USB that has up-to-date updates already installed? (if you know what I mean?) ....and is this process relatively simple?
View 9 Replies
View Related
May 22, 2010
I'm trying to update Karmic to Lucid. I try to update Karmic to the most recent update before I upgrade I get this error.
W: GPG error: [URL] karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9A06AEF9CB8DB0
View 4 Replies
View Related
Oct 21, 2010
I'm running ubuntu 10.04 (via wubi-installer) on a lenovo g560. I was quite comfortable on ubuntu and thought about switching from win7. I was proud, because i fixed a problem (almost) myself. My speakers and headphones were playing sound simultaniously, so i followed this solutionsNow i lost my faith: Since yesterday, my sound is totally gone. I assume, this problem appeared because of some recent "updates" i blindly accepted. Now, i have no idea where to start...aplay -l: "no soundcard found..."lspci -v: i seem to have two soundcards:
Code:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Lenovo Device 38af
[code]....
View 3 Replies
View Related
Jan 28, 2010
My system has Ubuntu and Debian (Squeeze) on it.I don't want to have to boot up Debian in order to get the recent updates.Is there a way to do this from Ubuntu?
View 2 Replies
View Related
Oct 30, 2010
Anyone else notice that the recent updates have trashed Swiftfox? Here's the error message: Quote: MozPlugger: Error: Too many types (32) for handler 22 (application/vnd.sun.xml.writer:sxw:OpenOffice Writer 6.0 documents)
Opera, Seamonkey and Firefox all work fine and if I open Firefox and then open Swiftfox, it's working just fine, so apparently FF handles the OpenOffice, etc., issues for it. It still fails if you have opened Seamonkey or Opera first.
View 2 Replies
View Related
Mar 12, 2011
Is it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.
View 9 Replies
View Related
Jun 24, 2011
I am running sid. A few days ago I ran an update which killed 3D. I followed this thread to get 3D support back. However I failed to hold those packages so I suspect a subsequent upgrade undid all that work. Now what is happening is that I do not have X starting at all. These are the relevant nvidia, mesa and xserver files installed
ii libgl1-nvidia-alternatives-ia32 270.41.19-1
simplifies replacing MESA libGL with GPU vendor libraries (32-bit)
ii libgl1-nvidia-glx-ia32 270.41.19-1
NVIDIA binary OpenGL 32-bit libraries
ii libglx-nvidia-alternatives 270.41.19-1
simplifies replacing Xorg module libglx.so with GPU vendor library
ii nvidia-installer-cleanup 20110515+1
Cleanup after driver installation with the nvidia-installer .....
Yet when I run lsmod I get:
nvidia 10710970 0
i2c_core 25601 14 adt7475,nvidia,tuner_simple,tda9887,tda8290,tea5767,tuner,cx8800,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,videodev,i2c_i801
I am missing something obvious in all of this.
xserver-xorg-video-nvidia:
Installed: (none)
Candidate: 275.09.07-3
Version table:
275.09.07-3 0
[URL]
View 2 Replies
View Related
Jul 6, 2009
If anyone else is having problems with their HP Photosmart (c4580) multifunction after the latest updates, here's what I did to get mine working once again -
1. Uninstalled hplip (ALL versions including standard AND packman), this also automatically uninstalls hplip-hpcups (which seems to be the cause of the problems) and automatically re-instates hplip-hpijs instead.
2. Remove all installed printers in Yast and also check on http://localhost:631 to make sure they are all removed.
3. If you have (as I did) lots of annoying test pages spooled and waiting to be printed, reboot now to (hopefully) get rid of them.
4. Disable your firewall (through yast) and add allowed service - cups. You might want to restart it, but to save time/frustrations/headaches/smashing your computer and printer out of frustration I would leave it disabled until you have successfully achieved a test page printout!
5. Download hplip-3.9.6b.run from here - HP Linux Imaging and Printing and follow the install instructions. It should eventually bring up the GUI interface where you can detect your printer.
5a. If it doesn't find your printer in the scan, then you are most likely going to have problems. Make sure your firewall is disabled/allowed and that the printer is actually reachable (ie by ping or the web interface). If still not reachable, then you need to find out your printer's IP address and enter that in a browser and get it's hostname.....
View 6 Replies
View Related
Jun 21, 2010
where I can find a list of Fedora 9 kernel updates (i.e. the updates that come through yum update) along with the dates they were released? I'd like to know when the last kernel I have installed (2.6.25.14-108.fc9.x86_64) was publicly released.
View 4 Replies
View Related
Jul 18, 2009
I did a yum update to install quite a few updates to my Centos 5.3 x86_64 system. Updates included kernel and xen which required a reboot. It must be a month or so since I last updated. The updates seemed to go fine - but when the machine restarts it goes through the bios screens which seem to detect all the hard drives etc - but then the word "Grub" appears at the bottom of the bios screen - and the system hangs. It doesn't appear to respond to keyboard input. The system is using linux raid in case that is relevant.
I am able to boot a centos5.2 live CD and look at the Logical volumes - and all appears in order to my untrained eye. I have also mounted the /dev/mdo as /tmp/bootx (boot volume) and had a quick look at /tmp/bootx/grub/grub.conf and /tmp/bootx/grub/device.map and again - I can't spot any obvious problem. I note that before the updates - my default boot was "1" and now it is "0" though this appears reasonable because the xen and non-xen images seem to be listed in the opposite order to earlier updates. I have set it to boot non-xen by default - and this has always worked in the past.
I realise that the recent updates may be a coincidence - and whatever is wrong may have occurred earlier. I cannot think of anything I have done which could have broken grub though. I can probably restore my boot volume to the state it was before the updates. I should have a backup from this morning - as luck would have it. Is this a safe thing to do - or do I need to restore both boot and root to keep them consistent. I would prefer not to restore the root system unless I have to - as this would cause some data loss. However I need advice as to whether yum and other things will get confused if the boot volume is restored in isolation.
View 11 Replies
View Related
Feb 7, 2011
Compiz seems to have had a bug where, upon using Compiz as the window manager, the mouse cursor would refuse to properly change after selecting a new theme. The workaround (altering the index.theme in/usr/share/icons/default) used to be a way around the issue... that is, until the latest Nautilus updates. Now even that won't let the cursor change, and I'm stuck with the issue of a Bluecurve cursor inside applications, but the default dmz-aa cursor on the desktop. Has anyone else found a way around this bug?
View 1 Replies
View Related
Jun 7, 2011
I have been running my Canon Pixma MP460 for years on suse linux. Worked fine also after upgrade to suse 11.4. I was running MP460 using MP160 drivers as per some forum information when 460 drivers were not available. Some recent updates, however, have killed operation of my printer. Will not even print a test page. I have tried my old MP160 driver and variations of same and new MP460 drivers from CUPS-Gutenprint.
Consistent error message is: "The PPD version (134566257) is not compatible with Gutenprint 5.2.7."
I downgraded and upgraded CUPS. I have deleted and reinstalled many printer drivers for MP160 and MP460. I have run the "cups-genppdupdate.5.2" per the error log message and other cups update programs in the same directory. Keep getting same message. Printer works when I reboot to windows 7 so hardware has not failed.
System is: Suse 11.4 32 bit w/usb mp460 printer.
Hate to bid farewell to my old faithful printer.
View 9 Replies
View Related
Feb 24, 2011
Unbuntu doesn't recognize my IPhone 3GS. I get the error message: "Unable to Mount Don" (no wisecracks "DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)"
I tried all 3 USB ports on my laptop with the same results. My IPhone has a message that says: "Charging not supported with this accessory" Does anyone have a fix for this?
View 1 Replies
View Related
Jul 11, 2010
I found a script online to mount the iphone with gtkpod iPod manager but still could not mount the iPhone as it said certain files weren't in my media file. Anyway laptop was perfect last night when I closed down.
Started up today with the message "the disk drive for /media/iPod is not ready yet or not present" and gives me the options: continue to wait - which does Nothing, press s to skip mounting which you hear the drums and then crashes or m for manual recovery- not sure what to do when I get here.
View 2 Replies
View Related
Jul 1, 2011
So I have ubuntu 10.04 installed on an ibook g4 1.2 ghz powerpc with 256 mb ram. Yeah I know kinda funny given all the lack of future support but it works nonetheless. I can't get my 1st gen iphone (3.1.3) to mount. It is however recognized from the cli Bus 001 Device 002: ID 05ac:1290 Apple, Inc. iPhone what should i do? I have a partition of mac os x 10.4.11 installed which also doesn't recognize the device (leopard is required).
I have all the modules and mobile device libraries installed from ubunutu software center but still I can't get it to mount. Are there any commands i should try? I'm still a complete novice at the command line.
View 1 Replies
View Related
Mar 9, 2011
I have an iPhone 3GS that was mounting a couple of weeks ago but now does not. Looking in /mnt I see a folder for the phone but the folder is empty. Phone is listed when I perform
Code:
steveneddy@machine:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
[Code].....
Also of note - I took a couple of photos off of the phone at work using an XP machine - just browsing the folder in Explorer, no iTunes. I believe this is where the trouble started. I will monitor this thread the best I can through the week and weekend - I will do my best to post any terminal output or commands at the earliest possible opportunity.
View 1 Replies
View Related
Feb 11, 2010
Unable to mount (DVD name) DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending I recently upgraded to 9.04. Installed medibuntu, ect, but still have this problem. I did not have the problem when I was using Hardy. The DVD I used yesterday was named "TNGS3D1", and though it showed up under places, clicking on the icon (right or left clicks) gave me the message above. Restarting and manually ejecting the DVD did nothing for it. I was able to finally mount the DVD yesterday, and operate it properly, after having this probem for several hours. I don't know why it suddenly worked, or why it doesn't now.
After using the DVD, I unmounted the icon on the desktop, but it is still listed under places. Today, I went to use another DVD, called "TNGS3D2". Again, it is listed under places, but it does not show up on the desktop. clicking on the icon just gives me the message again. Actually, now that I've typed all this, it's shown up on the desktop and works properly. (after approx. 20 min since closing the DVD tray) Is it jut slow? What can I do to fix all this? Why is yesterday's DVD still listed under places?
View 10 Replies
View Related
Apr 18, 2010
how can I mount my iPhone in Opensuse? after i connect my device to laptop via USB,opensuse doesn't mount it and recognize it at first as a digital camera.
View 3 Replies
View Related
Mar 3, 2011
There have been no updates recently (for almost two months) on any of my CentOS 5.5 boxes when I run 'yum check-update'. I may be misunderstanding the repo setup, but looking at the file mod dates, it seems that there hasn't been an update since 2011-01-06:[URL]...Meanwhile, a prominent North American Enterprise Linux vendor has had multiple security and bug fixes since then:[URl]...Is CentOS 5.5 still getting updated, or am I missing something (quite possible).
View 12 Replies
View Related
Jan 6, 2011
I've been running ubuntu on multiple computers for about 8 months now, installed on one computer as it's only OS (XP ran too slowly), and as a side OS for two others, one running XP and one running 7.The problem is, Ubuntu recently stopped booting on my Windows 7 computer. The option shows at start-up, but when I select it, the computer restarts back to the boot menu. I had recently installed an update from Update Manager that required a Restart, so when I restarted it to finish installing I left it to have dinner and it restarted into windows.About a day later, I wanted to boot ubuntu again, but my computer simply restarted, and has been doing this since (it's been about 3 days). I'm not sure if this has anything to do with it, but the last thing I installed before the update was a 1st person shooter game, I can't remember the name, but the icon was a "ka" symbol in katakana.
View 3 Replies
View Related
Jun 26, 2010
DBus error org.freedesktop.DBus.Error.UnknownMethod: Method "Unmount" with signature "sou" on interface "org.gtk.vfs.Mount" doesn't exist
View 1 Replies
View Related
Jun 26, 2011
I have a Samsung netbook with a built in hspa modem. I would like to create a wireless connection to my iphone so that i may share the internet connection. The iphone however picks up the network but is unable to connect to the internet.I am running 10.10. Can anyone please help as I have trie dto find a soln to this problem.
View 1 Replies
View Related
