Ubuntu :: Boot Up Debian In Order To Get Recent Updates
Jan 28, 2010My system has Ubuntu and Debian (Squeeze) on it.I don't want to have to boot up Debian in order to get the recent updates.Is there a way to do this from Ubuntu?
View 2 Replies
ADVERTISEMENT
CentOS 5 Hardware :: System Won't Boot After Recent Updates?
Jul 18, 2009I did a yum update to install quite a few updates to my Centos 5.3 x86_64 system. Updates included kernel and xen which required a reboot. It must be a month or so since I last updated. The updates seemed to go fine - but when the machine restarts it goes through the bios screens which seem to detect all the hard drives etc - but then the word "Grub" appears at the bottom of the bios screen - and the system hangs. It doesn't appear to respond to keyboard input. The system is using linux raid in case that is relevant.
I am able to boot a centos5.2 live CD and look at the Logical volumes - and all appears in order to my untrained eye. I have also mounted the /dev/mdo as /tmp/bootx (boot volume) and had a quick look at /tmp/bootx/grub/grub.conf and /tmp/bootx/grub/device.map and again - I can't spot any obvious problem. I note that before the updates - my default boot was "1" and now it is "0" though this appears reasonable because the xen and non-xen images seem to be listed in the opposite order to earlier updates. I have set it to boot non-xen by default - and this has always worked in the past.
I realise that the recent updates may be a coincidence - and whatever is wrong may have occurred earlier. I cannot think of anything I have done which could have broken grub though. I can probably restore my boot volume to the state it was before the updates. I should have a backup from this morning - as luck would have it. Is this a safe thing to do - or do I need to restore both boot and root to keep them consistent. I would prefer not to restore the root system unless I have to - as this would cause some data loss. However I need advice as to whether yum and other things will get confused if the boot volume is restored in isolation.
Debian Hardware :: Recent Updates Have Killed X (NVidia)
Jun 24, 2011I am running sid. A few days ago I ran an update which killed 3D. I followed this thread to get 3D support back. However I failed to hold those packages so I suspect a subsequent upgrade undid all that work. Now what is happening is that I do not have X starting at all. These are the relevant nvidia, mesa and xserver files installed
ii libgl1-nvidia-alternatives-ia32 270.41.19-1
simplifies replacing MESA libGL with GPU vendor libraries (32-bit)
ii libgl1-nvidia-glx-ia32 270.41.19-1
NVIDIA binary OpenGL 32-bit libraries
ii libglx-nvidia-alternatives 270.41.19-1
simplifies replacing Xorg module libglx.so with GPU vendor library
ii nvidia-installer-cleanup 20110515+1
Cleanup after driver installation with the nvidia-installer .....
Yet when I run lsmod I get:
nvidia 10710970 0
i2c_core 25601 14 adt7475,nvidia,tuner_simple,tda9887,tda8290,tea5767,tuner,cx8800,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,videodev,i2c_i801
I am missing something obvious in all of this.
xserver-xorg-video-nvidia:
Installed: (none)
Candidate: 275.09.07-3
Version table:
275.09.07-3 0
[URL]
Ubuntu Installation :: ISO File With Most Recent Updates
Jan 3, 2010After not having used Ubuntu for a few months now, I want to make up a new LiveCD and possibly a bootable USB. The times I have done this in the past, the installations don't include recent updates which need to be downloaded and installed once the system is running. (Understandably)
Two questions:
1) Does Ubuntu update the downloadable ISO periodically to include recent updates?
...for example: Now that it is January (ie. some 3 months after release of Karmic in October '09 and some 200-300Meg+ of updates required since that time), will I be downloading an ISO from Ubuntu that has recent updates already as part of it, or will it still require updates to be downloaded and installed once Ubuntu is running on the computer?
2) If the downloadable ISO has not been updated since Oct '09, is there a way of making a LiveCD/bootable USB that has up-to-date updates already installed? (if you know what I mean?) ....and is this process relatively simple?
Ubuntu :: Signatures Cannot Be Verified For Recent Updates
May 22, 2010I'm trying to update Karmic to Lucid. I try to update Karmic to the most recent update before I upgrade I get this error.
W: GPG error: [URL] karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9A06AEF9CB8DB0
Ubuntu Multimedia :: Sound Is Gone, After Some Recent Updates?
Oct 21, 2010I'm running ubuntu 10.04 (via wubi-installer) on a lenovo g560. I was quite comfortable on ubuntu and thought about switching from win7. I was proud, because i fixed a problem (almost) myself. My speakers and headphones were playing sound simultaniously, so i followed this solutionsNow i lost my faith: Since yesterday, my sound is totally gone. I assume, this problem appeared because of some recent "updates" i blindly accepted. Now, i have no idea where to start...aplay -l: "no soundcard found..."lspci -v: i seem to have two soundcards:
Code:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Lenovo Device 38af
[code]....
Debian :: Don't Show Grub List On Boot / Just Go To Most Recent
Mar 28, 2010How do I make debian not show the grub list, and just go to the newest kernel?
View 7 Replies View RelatedUbuntu :: Unable To Mount IPhone 3GS Since Recent Updates
May 30, 2011I was quite pleased to see that Ubuntu 11.04 now loads and reads the contents of my iPhone 3GS.
(Once I connect the phone to my netbook, Shotwell and Banshee would recognize the cell-phone and give me options to manage my data.Alas, that joy has been very short-lived. As of the most recent updates, something appears to have 'broken' this functionality. [TODAY's DATE: Monday, 30 May, 2011],
Now when I connect the phone Nautilus fails to mount it, and I consistently get the same error message:
"DBus error org.freedesktop.DBus.Error. NoReply:Message did not receive a reply (timeout by message bus)"
Fedora :: Swiftfox Crashes After Recent Updates
Oct 30, 2010Anyone else notice that the recent updates have trashed Swiftfox? Here's the error message: Quote: MozPlugger: Error: Too many types (32) for handler 22 (application/vnd.sun.xml.writer:sxw:OpenOffice Writer 6.0 documents)
Opera, Seamonkey and Firefox all work fine and if I open Firefox and then open Swiftfox, it's working just fine, so apparently FF handles the OpenOffice, etc., issues for it. It still fails if you have opened Seamonkey or Opera first.
Ubuntu Installation :: Upgrade A Live USB So The It Installs With The Most Recent Updates?
Mar 12, 2011Is it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.
View 9 Replies View RelatedOpenSUSE Hardware :: Hplip Hosed Yet Again After Recent Updates?
Jul 6, 2009If anyone else is having problems with their HP Photosmart (c4580) multifunction after the latest updates, here's what I did to get mine working once again -
1. Uninstalled hplip (ALL versions including standard AND packman), this also automatically uninstalls hplip-hpcups (which seems to be the cause of the problems) and automatically re-instates hplip-hpijs instead.
2. Remove all installed printers in Yast and also check on http://localhost:631 to make sure they are all removed.
3. If you have (as I did) lots of annoying test pages spooled and waiting to be printed, reboot now to (hopefully) get rid of them.
4. Disable your firewall (through yast) and add allowed service - cups. You might want to restart it, but to save time/frustrations/headaches/smashing your computer and printer out of frustration I would leave it disabled until you have successfully achieved a test page printout!
5. Download hplip-3.9.6b.run from here - HP Linux Imaging and Printing and follow the install instructions. It should eventually bring up the GUI interface where you can detect your printer.
5a. If it doesn't find your printer in the scan, then you are most likely going to have problems. Make sure your firewall is disabled/allowed and that the printer is actually reachable (ie by ping or the web interface). If still not reachable, then you need to find out your printer's IP address and enter that in a browser and get it's hostname.....
Red Hat / Fedora :: List Of Recent 9 Kernel Updates With Dates?
Jun 21, 2010where I can find a list of Fedora 9 kernel updates (i.e. the updates that come through yum update) along with the dates they were released? I'd like to know when the last kernel I have installed (2.6.25.14-108.fc9.x86_64) was publicly released.
View 4 Replies View RelatedFedora :: IPhone Fails To Mount On Fc14 After Some Recent Updates
Dec 2, 2010I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!
Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?
Fedora :: Compiz Mouse Cursor Bug Made Worse With Recent Updates?
Feb 7, 2011Compiz seems to have had a bug where, upon using Compiz as the window manager, the mouse cursor would refuse to properly change after selecting a new theme. The workaround (altering the index.theme in/usr/share/icons/default) used to be a way around the issue... that is, until the latest Nautilus updates. Now even that won't let the cursor change, and I'm stuck with the issue of a Bluecurve cursor inside applications, but the default dmz-aa cursor on the desktop. Has anyone else found a way around this bug?
View 1 Replies View RelatedOpenSUSE Hardware :: Recent Updates Killed Operation Of Canon MP 460 Printer
Jun 7, 2011I have been running my Canon Pixma MP460 for years on suse linux. Worked fine also after upgrade to suse 11.4. I was running MP460 using MP160 drivers as per some forum information when 460 drivers were not available. Some recent updates, however, have killed operation of my printer. Will not even print a test page. I have tried my old MP160 driver and variations of same and new MP460 drivers from CUPS-Gutenprint.
Consistent error message is: "The PPD version (134566257) is not compatible with Gutenprint 5.2.7."
I downgraded and upgraded CUPS. I have deleted and reinstalled many printer drivers for MP160 and MP460. I have run the "cups-genppdupdate.5.2" per the error log message and other cups update programs in the same directory. Keep getting same message. Printer works when I reboot to windows 7 so hardware has not failed.
System is: Suse 11.4 32 bit w/usb mp460 printer.
Hate to bid farewell to my old faithful printer.
Debian :: Change Order Of GRUB Boot List?
Apr 1, 2010I tried looking this up. It seems that in Ubuntu, you need to edit /boot/grub/menu.lst. I tried that, and the file is not present in Debian "Squeeze". (Just trying it out on a different PC, In case you are confused by my other thread regarding Lenny) So what do I need to do to change the default OS to boot?
View 3 Replies View RelatedUbuntu :: Take Ownership Of Firefox In Order For It To Get Updates And To Save Settings
Jan 26, 2011I remember back a few versions, you needed to take ownership of firefox in order for it to get updates and to save your settings. Is this needed in 10.10? Im giving Ubuntu a go again.
View 3 Replies View RelatedFedora :: Catch Updates In Order To Install Them Later Offline?
Jan 24, 2011I have 2 PCs, one of them is updated with latest updates.
For sure the 2 PCs have the same OS Fedora 14. How to install or catch those updates in order for me to install them offline on the other PC ?
OpenSUSE :: Online Update Applet Running In Order To Be Notified Of Updates?
Sep 8, 2010In OpenSuSE 11.2 YaST -> Online Update Configuration I can configure how often the system should check for updates (i.e. daily, weekly). Does this operate independently from the Online Update Applet(kupdateapplet)? The reason I ask is that the Applet doesn't always seem to work correctly. However, if the system will check for online updates automatically regardless of the Applet, perhaps this isn't an issue. If I can avoid messing with the Applet, that would be great.
View 1 Replies View RelatedCentOS 5 :: Apparent Lack Of Recent Updates With CentOS 5.5?
Mar 3, 2011There have been no updates recently (for almost two months) on any of my CentOS 5.5 boxes when I run 'yum check-update'. I may be misunderstanding the repo setup, but looking at the file mod dates, it seems that there hasn't been an update since 2011-01-06:[URL]...Meanwhile, a prominent North American Enterprise Linux vendor has had multiple security and bug fixes since then:[URl]...Is CentOS 5.5 still getting updated, or am I missing something (quite possible).
View 12 Replies View RelatedDebian :: Cold Turkey - Windows Xp Would Not Boot Afterwards - Updates Automatic?
Jul 25, 2010I tried to partition with P Magic but my windows xp would not boot afterwards, so I have gone cold turkey.....wiped the drive and installed linux. Debian is now the third one I've looked at and hope to stay here. Couple questions right off
1) Is firewall installed with debian installation or do I have to do something else?
2) are updates automatic?
Ubuntu :: Unable Boot After A Recent Update
Jan 6, 2011I've been running ubuntu on multiple computers for about 8 months now, installed on one computer as it's only OS (XP ran too slowly), and as a side OS for two others, one running XP and one running 7.The problem is, Ubuntu recently stopped booting on my Windows 7 computer. The option shows at start-up, but when I select it, the computer restarts back to the boot menu. I had recently installed an update from Update Manager that required a Restart, so when I restarted it to finish installing I left it to have dinner and it restarted into windows.About a day later, I wanted to boot ubuntu again, but my computer simply restarted, and has been doing this since (it's been about 3 days). I'm not sure if this has anything to do with it, but the last thing I installed before the update was a 1st person shooter game, I can't remember the name, but the icon was a "ka" symbol in katakana.
View 3 Replies View RelatedUbuntu :: Edit To Change Boot Order And Various Boot Selections?
Jan 6, 2010I upgraded from XP to Windows 7 (I need this for legacy business) and decided to install Ubuntu permanently rather than using from CD. During an Ubuntu session I was prompted to upgrade, which I did, but when I boot up now, there seems to be 2 versions of Ubuntu which I can choose from the boot up menu, plus the usual mem test, safe mode etc, plus the option to boot Windows 7.
Firstly, is there in fact more than one Ubuntu image (and therefore precious disk space taken up), how do I find out, and if so what action should I take?If there is only one Ubuntu and one Windows 7 image, how do I edit (and where is the file) to change the boot order and the various boot selections?
Ubuntu :: Hangs On Boot Up After Most Recent Kernel Update To Version 2.6.38-11
Sep 1, 2011The most recent kernel update, to version 2.6.38-11 has been a horror. It hangs on boot up. Sometimes I can get to the log in screen, then it hangs there as well. However, after 3-5 reboots (which is absolutely annoying to do when I just want to use my computer), it sometimes loads up finally. However, if I go to older Linux version in the Grub menu, then I can select 2.6.38-10 and it runs just fine.
So I am looking for a way to fix this problem, whether it be removing the most recent kernel update, or making 2.6.38-10 boot up by default. I noticed that the kernels are listed in the synaptic package manager, but I am afraid to remove the most recent one via synaptic. Is it as simple as removing the Linux version and headers I don't want, or are there other things I need to do in order to make 2.6.38-10 my default kernel at start-up?
Fedora :: Recent Kernel Update Won't Boot ?
Aug 10, 2009The girlfriend did an update a few nights ago. Besides removing her NVidia drivers, it also installed kernel version 2.6.27.29-170.2.78.fc10.i686.
That kernel was causing problems. Now it won't boot at all. How do we remove that kernel altogether?
If we remove it, would simply doing another update from the previous (still working) kernel just try to reinstall that bad kernel?
Fedora Installation :: Change The Boot Order To Boot Windows 7 First?
Jun 15, 2011Dual booting Windows 7 and Fedora 15. What I would like to know is if I can change the boot order to boot Windows 7 first and Fedora 15 as other or second.
View 5 Replies View RelatedFedora X86/64bit :: Cannot Complete Boot After Most Recent Update
Apr 26, 2009Just did the most recent set of updates late yesterday (kernel and Nvidia). Since the update I cannot get to a login screen - just blinking cursor. In fact the cursor blinks for a bit then disapears only to reappear as if there are repeated attempts to complete a process unsuccessfully.
The update replaced the xorg.conf. I tied a couple of revisions, inlcuding replacing it with the earlier working xorg.conf. No luck.
Hardware is MSI K9N6GM board with Nvidia Geforce 6100 nforce 430.
General :: Messed UP Boot Order On Dual Boot
Jun 24, 2011I am working on another's Dell Inspiron 530 with Vista 64-bit; see below:
[code]....
wanting a dual-boot, 500GB hdd was formatted as above, Win Vista x64 Recovery CD was created, and antiX-M11 (as Swift Linux 0_1_1) installed. Now, at startup, machine boots to antiX and not Vista. User wants it the other way around. I think I should have reordered the partitions and not installed GRUB in MBR. EasyBCD is the preferred boot loader for User. This is a learning experience but due to time constraints and not being at my home where references are available, EasyBCD is on a USB stick -- should I boot to the Vista Recovery CD and then try to install EasyBCD to sda3 from it, uninstall antiX (but this will not fix the MBR problem, will it?), or edit fstab or what
Debian :: Awn Applets Do Not Work After Recent Update
Aug 19, 2011I have been dsitro skipping around. Reinstalling the new versions every six months, only to find more major drawbacks recently with ubuntu. I fixed a major problem with adobe flash being majorly slow on my hardware by following the debian flash guide, what a life saver. I now love my linux system, flash was always a pain, made me appreciate windows. I thought I might try a rolling release distro (PCLinuxos is pretty good but I couldn't install office in wine). I heard about the speed of debian - the mother of all distros. But when I tried debian stable, I had hard crashes so I decided to try Wheezy instead.
Now I seem to be sitting pretty. With one exception, the latest 0.41 update of the AWN window manager breaks the awn applets. I have locked the version at 0.4 by going back to the stable branch that worked. But I would rather not have to check to see if the next updates is going to break them again. There were some more updates recently to awn-applets not sure if they fixed this problem. Why was this update released in the first place, when it breaks down awn almost completely ? without the applets it's almost useless. It's probably something simple like changing the directory but still annoying.
Debian Configuration :: Errors During Recent Apt-get Dist-upgrade
Feb 15, 2016This is on my AMD64 Testing box...A couple days ago during an apt-get dist-upgrade, near the end I saw the errors below.
I haven't noticed anything broken, yet. I usually only see dkms errors when VBox squawks after an update and I run /etc/init.d vboxdrv setup.
The section of the results containing the errors to the end of the output:
Code: Select allSetting up linux-image-4.3.0-1-amd64 (4.3.5-1) ...
/etc/kernel/postinst.d/dkms:
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 -Â (-30969)
error: cannot open Packages database in /root/.rpmdb
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
[Code] ....