I don't know why but show Desktop Ctrl-Alt-D suddenly stopped working for Firefox only (in all workspaces).
Any ideas what might have caused this? Any work-arounds? (apart from Ctrl-Alt-(arrow) / switching to a different workspace - which is a fair workaround)
I have been using Ubuntu for many years now and pressing ctrl + alt + d used to minimize all windows and show the desktop, but this stopped working with 10.10. I checked keyboard shortcuts but don't see a way to turn it back on there.
View 3 Replies View RelatedI have Firefox 3.5.11 for Opensuse Linux 11.2. This morning I tried to install an add-in and it was not compatible with Firefox. Now, Firefox will not load. I tried to reinstall Firefox through YAST but this did not work. How do I get Firefox working again?
View 4 Replies View Relatedi just upgraded to ubuntu 10.04 from 9.10. videos wont play in firefox anymore. ..... videos require 100% computing power and play at 1 frame every 5 seconds with choppy audio.
View 2 Replies View RelatedThis morning my Karmic desktop stopped connecting to the internet (Firefox & Evolution). Network is all ok and other machines can connect fine - in fact I am typing this from a Windows 7 virtualbox running on the offending machine. Investigation shows that this is definitely a DNS problem as I can connect to sites / mailservers by using the ip address. Have tried several reboots which did not help. PowerDNS is installed. When I restart it the ff output is send to syslog:
[Code]...
over the last couple of weeks, firefox has asked to be upgraded a few times. shockwave flash has also asked to be upgraded. sometime last week after upgrading shockwave flash all video stopped. so i have no videos, video in webpages just shows a grey box, with a light grey arrow.i have been very busy so i have taken time here and there to check the internet for solutions. there appear to have been problems with macs' and a lot of the problems appear to be from august 2009 onwards,am not sure it is the same problem.i am running opensuse 11.1mozilla firefox 3.6.10shockwave flash 10.1 r82 is enabled
code:
uname -a
gives me:
[code]...
Firefox 3.6 "Namoroka" stopped working after a recent update. Clicking on my panel launcher or the launcher in the applications menu does nothing. I even tried starting Firefox from the terminal and got an error message: "(firefox-bin:3592): GLib-WARNING **: g_set_prgname() called multiple times", whatever that means.I would be willing to rip out Firefox and start all over again but I don't know how to remove the 3.6 version. I couldn't find a method in the Software Center for doing that graphically.
View 7 Replies View RelatedI'm wondering if anyone is having a similar problem as mine when running Hulu Desktop. The application starts fine, but when I try to select anything to watch, the green progress bar continually resets over and over again as it tries to buffer a video, and playback never starts as a result. This happens for low, medium, and high quality. Hulu Desktop was working perfectly fine a few months ago. I've always been running Ubuntu 9.10 (64-bit) with the latest 64-bit Flash pluggins, and didn't have a problem before. Running Hulu Desktop from the command line doesn't reveal any error messages either.
View 7 Replies View RelatedI recently setup an ssh tunnel and wrote a script to connect to my Home PC from my laptop no matter where I am.
I have previously tested this on my own network and multiple other networks while I was over at my friends houses, and it worked completely fine.
So just now I decided to use it after about a day or two after not using it and now nothing happens. Normally it prompts me for a password and takes about 5 seconds then I am in.
I'm using openssh, vinagre, and dyndns for the hostname. Here is the script:
Code:
Remote desktop viewer has stopped working in ubuntu 10.04. When I click on the icon in the top panel. The message Starting Remote Desktop viewer appears in the bottom panel for about 20 seconds and then it disappears and nothing further happens.
Yesterday I disabled ipv6 which greatly speed up thunderbird email and coincidently solved a problem I was having with Google earth not connecting to the server.
I do not know if this is what is now causing the problem with Remote Desktop viewer.
I have a remote desktop app for my ipod that i use every now and then, but after about a week and a half of not using remote desktop on either my ipod or my computer, it seems to have stopped working. the problem is with my computer rather than my ipod. when i go to menu>system>preferences>remote desktop, the area where it is supposed to give you the ip address, or whatever it is to connect remotely, is no longer a number, but just the word "localhost". i only saw this after my ipod told me it could not find the host, so i checked and thats when i saw localhost. putting that into the remote desktop app did nothing, so i tried my ip address and that didnt work either. clicking on "localhost" brings up evolution mail which wants me to send it as an email, strangely. not sure whats going on here.
View 2 Replies View RelatedSystem: Intel E5400 "Intel 64 Architecture for 64-bit Computing"
Fedora: F14: 32-bit version from OSDisc.com
uname gives the following:
Linux localhost1.localdomain 2.6.35.11-83.fc14.i686 #1 SMP Mon Feb 7 07:04:18 UTC 2011 i686 i686 i386 GNU/Linux
Firefox: 3.6.15 using yum
Adobe Reader 9.4.2.02/11/2011 using yum from "adobe-linux-i386" repository
Plugin listed as: Adobe Reader 9.4: nswrapper_32_32.nppdf.so
Since a week or two, clicking a link to a pdf file will not load in Firefox. I tried removing Adobe Reader and reinstalling it. Then the pdf files loaded, but now again they will not load. It just stopped working! No error messages.
The desktop effects on my system stopped working. They were working fine up to a couple of days ago. Now it says I need to check my configuration for xorg. How do you do that?
Also this appears to have started after another user was using my system and crashed it. They said that it just shut-off with no explanation as to what happened.
lspci -v shows this
HTML Code:
01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff02
Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 16
[Code].....
How do I get back to the systems default drivers?
I do NOT wish to have to reinstall F14 yet again because the system has been very stable since the last install.
For more than a year I was happily using my Fedora 11 remotely through VNC over ssh. I was using desktop 0 on port 5900 so people at the office can see what I am doing.
Yesterday I upgraded to Fedora 12, then 13 and then 14. I installed all updates of F14. All went well until I came to use this server from home as usual. The server was not responding.
I brought up /etc/X11/xorg.conf from a backup tape because I discovered that it is there that screen 0 is set and not in /etc/sysconfig/vncservers and rebooted. No success!
At the command lsof | grep LISTEN, I could not see a listener on port 5900
I activated screen 1 on port 5901 and I could log in OK and with lsof I could see listeners for ports 5901 and 6001 but I need screen 0!
During the day I tried many things including removing the vncserver packages with yum and re-installing them, removing the .vnc folder in the user home folder and starting from scratch. The server is still refusing connection!
Well I guess the topic says it all. I've recently upgraded to Maverick from Lucid all went smoothly until i restarted and realized that the remote desktop server included stopped functioning all of a sudden. tried other vnc servers with no luck.
View 9 Replies View RelatedI have a notebook with an Nvidia Quadro NVS 130M. Desktop effects were working on OpenSUSE 11.2. Last week I upgraded to OpenSUSE 11.3, and now desktop effects do not work. When I try to enable them, a box pops up that says something like "desktop effects are not supported on your hardware / configuration. Do you want to try anyway?". If I "try anyway", it does NOT work - I get a jumbled screen that is mostly black, but sometimes objects appear when I mouse over them.
I have the proprietary nvidia drivers (version 256.53) loaded and working (nvidia kernel module loaded, Nvidia splash screen on X server startup, correct lines found in Xorg.0.log).
The Composite option is enabled:
Never-the-less, I still cannot enable the desktop effects.
OpenSuSE 11.1 updated on Saturday to all of the latest patches and stuff. I was a bit behind, so quite a few things got updated. Most of them probably don't matter for this problem.
Prior to Saturday, desktop effects were working fine. After, they don't. Gnome still works ok, but attempting to go in to the "Desktop Effects" configuration just hangs for a minute (spinning "wheel" cursor) then nothing happens ("arrow" cursor returns).
Looking at things via "ps ax" I can see that clicking on "Desktop Effects" starts process(/usr/bin/python /usr/bin/simple-ccsm).
Running this from a CLI produces:
After which nothing happens and I have to hunt down the PID and kill it.
Searching for this "tuple index out of range" error, I found a couple of 2008 references, but those are for much older version so I'm thinking that they're probably not relevant. Nothing else seems to apply.
I downloaded the 10.10 desktop version. Everything seems to work fine except Firefox. Sure, I can get on, but getting out is something of a chore. Half the time the page freezes and won't allow me to try anything else.
I tried: Clicking on the red "X" = nothing
Right-clicking on the page and selecting "Back" = nothing
Right-clicking on the task bar and selecting "Close" = nothing
Restarting the computer = nothing
The only way to get out when that happens, is to hold down the "Power" button. I know it's not good for the computer, but being held hostage in Firefox is not good for my patience. Even that is a crap-shoot. Sometimes it boots back up fine, only to resume what happened before the power went out when I log back into Firefox. Sometimes it won't let me out until I scan back to the main page by using the arrows one page at a time. This kind of thing never happened when I had the 9.04.
I have 3 layouts: USA, Russian and Hebrew. In Hebrew the W key is mapped to apostrophe, so Ctrl+W in Hebrew layout doesn't close tabs in Firefox. There is no workaround for it as I see by now, so I am trying to get it work this way:I want to map Ctrl+W in Hebrew layout(which is actually a Ctrl+') to be a Ctrl+w. Here is what I got from xmodmap:Code:$ xmodmap -pke | grep 25keycode 25 = w W Cyrillic_tse Cyrillic_TSE apostrophe WAs you can see, there are pairs for each layout, each pair tells what happens without and with the Shift key pressed.
View 2 Replies View Relatedtrl-q closing firefox being next to ctrl-w closing tab shortcut is one of the most annoying things firefox4. Had a look on http://ubuntuforums.org/showthread.p...firefox+ctrl-q but it does not really work with firefox from what I tried. Any clues that do not involve installing a plugin? Even a warning that you are about to close multiple tabs would be ok for me. Disabling completely would be ideal.
View 2 Replies View RelatedI am doing a project on rdesktop. My aim is to setup a write/copy protected session. I have made rdesktop connection between two Linux machines using Xrdp.Next I want to disable the ctrl+x,ctrl+v keys and the cut and copy option in mouse right click at client side
View 1 Replies View Relatedi am using gcc 4.3i need to recognize ctrl+c,ctrl+l,ctrl+d in my C program without terminating the program when i get a ctrl+c...
View 1 Replies View RelatedI ran into a problem the moment i installed 11.1. The GUI wouldn't show up (ctrl+alt+f2 yeilded a black screen with a blinking underscore). Failsafe worked fine, though.
So, i tried entering, one by one, every parameter that was entered in the failsafe boot options. Entering 'x11failsafe' gave me a flawless GUI. So, i opened the '/boot/grub/menu.lst' file and added this parameter in the 'showopts' of the normal mode, to make it permanent. Fine. Now, what exactly have i done?
Note- I use an NVidia 8000 series Graphic card. I'll post more details if you need them.
Is there any way to paste texts without formating in Firefox? Normally, I'm using Ctrl+Shift+V shortcut in OpenOffice.org; and now Google Chrome has the same function:
[URL]
I found Copy Plain Text and Extended Copy Menu add-ons for custom copy but I still could not find a compatible add-on for custom paste.
[URL]
How to disable Ctrl W shortcut in Firefox ?
Firefox does not provide any tool to do that. I am using gnome and Fedora 11. I tried the extension "Keyboard Shortcuts 0.1" it does nothing.
I have been using Ctrl +/- to expand/shrink the displayed font on web pages in Firefox since I figured out how to do it back in version 0.something. Today I happened to be accessing this page https://personal.vanguard.com/us/fun...T#hist=tab%3A2 and I noticed that when I expanded the font the text to the right side was pushed off screen - not unusual - but that I did NOT have a slider at the bottom of the browser window to allow me to move to the off screen text. I continued to press Ctrl+ until the font would no longer expand. At the very larges font the slider reappeared however, it will only move a little bit to the right.
I then accessed the page with Internet Explorer and Firefox 3.5.8 on an XP box - the slider appeared as expected and I can slide to the right to see all of the enlarged text.
I created a new user on my Ubuntu machine, signed on as that user and viewed the page. Again, no issues. Seems like something in my profile rather than the web page itself or Firefox as installed on my PC.I tried disabling the few addons which I use (Noscript, Addblock Plus, etc.) - no improvement.I now created a virtual machine (VMWare) and installed Ubuntu 10.04 64 bit. Tried the page in Firefox and it works fine. Then I copied my profile to the virtual machine - the page experiences the same problem. So obviously there is SOMETHING in my profile which is causing the issue.
And for my next trick I replaced the copy of prefs.js in my profile on the VM with prefs.js from the default profile. Other than forgetting everything I have ever configured in Firefox, this has fixed the problem. But not a pretty way to go.
I have this little problem with my keyboard. When in Firefox, I have to ctrl+click a link about three times before there is any reaction and a new tab is opened with that link. There is not much chance that there is some physical impediment in the keyboard because all of my other keyboard shortcuts involving ctrl work fine, and I have disassembled and cleaned the keyboard on my netbook (eeepc 1008ha).
View 4 Replies View RelatedNOTE: compizconfig manager is not suitable for ubuntu 11.04 with unity,works fine with 9.10 and 10.10.
Ubuntu enables "Desktop Wall" by default. By holding Ctrl-Alt keys and pressing the left-arrow or right-arrow key each time, it slides through desktop workspaces horizontally for you to choose one to work on. Alternatively, you can change this to a "rotate cube" effect. Go To System > Preferences > CompizConfig Settings Manager.
Select "Desktop" from the left panel.
Tick "Rotate Cube".
Select "Enable Desktop Cube" as this plugin is required by "Rotate Cube".
Select "Disable Desktop Wall".
Immediately you can rotate your desktop workspaces in this way holding down Ctrl-Alt keys, EITHER press the left-arrow or right-arrow key OR left-click the mouse and drag it to left or right.
if there is no compiz manager in your system,download it.. type :sudo apt-get install compizconfig-settings-manager ..
I have set up a server running ubuntu desktop, and I'm able to logon through remote desktop (win 7). The problem is that if I logon from computer 1 and open some programs, I don't see these programs when I logon from computer 2.I logon with the same user, so I find this strange. Is there some setting I have missed to be able to see the same from any computer (logon through remote desktop).
View 5 Replies View RelatedToday I did a fresh installation of Ubuntu 10.04 server (64bit) on my machine and found that CTRL-c (i.e., control key plus c) does not work in emacs 23.1 (from emacs23 package), which means I cannot quit the emacs by "CTRL-x CTRL-c" any longer.
Whenever I type CTRL-C, the emacs says "<cancel> is undefined". The "describe key (i.e., CTRL-h k)" command for CTRL-c leaves the following message in the message buffer: "<cancel> (translated from C-c) is undefined".
Until 9.10, I have never had such problems and wonder whether this has been introduced by 10.04.
In fact, I found that the behavior of CTRL-c has been slightly changed in a terminal (e.g., putty session) as well, and googling gives the following: [URL]
But I'm not sure the above has something to do with the said issue with emacs.