Fedora :: Desktop Effects On System Stopped Working?
Dec 27, 2010
The desktop effects on my system stopped working. They were working fine up to a couple of days ago. Now it says I need to check my configuration for xorg. How do you do that?
Also this appears to have started after another user was using my system and crashed it. They said that it just shut-off with no explanation as to what happened.
lspci -v shows this
HTML Code:
01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff02
Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 16
[Code].....
How do I get back to the systems default drivers?
I do NOT wish to have to reinstall F14 yet again because the system has been very stable since the last install.
View 2 Replies
ADVERTISEMENT
Sep 16, 2010
I have a notebook with an Nvidia Quadro NVS 130M. Desktop effects were working on OpenSUSE 11.2. Last week I upgraded to OpenSUSE 11.3, and now desktop effects do not work. When I try to enable them, a box pops up that says something like "desktop effects are not supported on your hardware / configuration. Do you want to try anyway?". If I "try anyway", it does NOT work - I get a jumbled screen that is mostly black, but sometimes objects appear when I mouse over them.
I have the proprietary nvidia drivers (version 256.53) loaded and working (nvidia kernel module loaded, Nvidia splash screen on X server startup, correct lines found in Xorg.0.log).
The Composite option is enabled:
Never-the-less, I still cannot enable the desktop effects.
View 5 Replies
View Related
May 25, 2010
OpenSuSE 11.1 updated on Saturday to all of the latest patches and stuff. I was a bit behind, so quite a few things got updated. Most of them probably don't matter for this problem.
Prior to Saturday, desktop effects were working fine. After, they don't. Gnome still works ok, but attempting to go in to the "Desktop Effects" configuration just hangs for a minute (spinning "wheel" cursor) then nothing happens ("arrow" cursor returns).
Looking at things via "ps ax" I can see that clicking on "Desktop Effects" starts process(/usr/bin/python /usr/bin/simple-ccsm).
Running this from a CLI produces:
After which nothing happens and I have to hunt down the PID and kill it.
Searching for this "tuple index out of range" error, I found a couple of 2008 references, but those are for much older version so I'm thinking that they're probably not relevant. Nothing else seems to apply.
View 2 Replies
View Related
Jul 21, 2010
Has anyone in here had the luck to enable desktop effects with GeForce 7300 sametime installing the proper geforce 7300 drivers on a twinheaded monitors? Twinheaded meaning im on a dual head monitors.Can't seem to have desktop effects working. I was able to install the nvidia drivers vi installing the rpmfusion repo's and installing kmod-nvidia-PAE.i686 xorg-x11-drv-nvidia-libs.i686. Rebooted and it worked, Now when i try System>Prefs>Desktop Effects i get "Accelerated 3D graphics is not available. Desktop effects require hardware 3D support".
View 5 Replies
View Related
Mar 16, 2011
Frivolous, I know, but you can't imagine how many winbloz users see this on my laptop and ask how they can get openSuse.
View 4 Replies
View Related
Feb 6, 2011
I'm not able to get the Desktop Effects/3D graphics to work on a Gateway laptop. I suspect that I'm not using the correct nvidia drivers but I don't know what drivers I need for my system.I followed the instructions from this link with no luck.
Some system info:
# uname -rs
Linux 2.6.35.10-74.fc14.x86_64
[code]...
View 1 Replies
View Related
Mar 9, 2011
For more than a year I was happily using my Fedora 11 remotely through VNC over ssh. I was using desktop 0 on port 5900 so people at the office can see what I am doing.
Yesterday I upgraded to Fedora 12, then 13 and then 14. I installed all updates of F14. All went well until I came to use this server from home as usual. The server was not responding.
I brought up /etc/X11/xorg.conf from a backup tape because I discovered that it is there that screen 0 is set and not in /etc/sysconfig/vncservers and rebooted. No success!
At the command lsof | grep LISTEN, I could not see a listener on port 5900
I activated screen 1 on port 5901 and I could log in OK and with lsof I could see listeners for ports 5901 and 6001 but I need screen 0!
During the day I tried many things including removing the vncserver packages with yum and re-installing them, removing the .vnc folder in the user home folder and starting from scratch. The server is still refusing connection!
View 4 Replies
View Related
Sep 3, 2009
I'm using Fedora 10 on my HP Pavillion Dv6 series laptop. VGA is nVidia. I checked the nVidia and they have a driver for Fedora Linux. But when I tried to install this driver it says my driver is not compatible with my kernel version. But I had the latest kernel. and further can't I upgrade my kernel after installing this driver if it works?
View 1 Replies
View Related
Oct 18, 2010
I am using Kubuntu 10.10, and I have an Nvidia GT 320M with driver version 260.19.12 (updated from 260.19.09 i think) on my laptop. Suddenly, my desktop effects stopped working, and the window borders and window manipulation buttons are getting mixed up with everything else when i mouseover them or click on them (I guess some desktop effect I had is malfunctioning or not functioning at all?). Under System Settings -> Desktop Effects, I can only see grey'd out options, which won't let me enable desktop effects.
View 9 Replies
View Related
Jul 1, 2011
I installed Slackware 13.37 on a new hard drive today. After booting in to KDE everything seemed to be working as normal. I hadn't yet installed my video drivers but I still have the limited eye candy afforded by default. After that I switched to XFCE and transferred some data over (for some reason Dolphin hates certain folders of mine) and when I logged back in all the desktop effects were inactive. When I selected desktop effects from the menu I saw the message "Desktop effects are not available on this system due to the following technical issues:" No issues are listed, and I can select nothing, even after installing proprietary ATI drivers. I created a new account and everything works perfectly in it.
View 3 Replies
View Related
Sep 28, 2010
I just switched back to the open source radeon driver, since the kernel update may have messed with fglrx for the proprietary driver. if i boot into nomodeset then i have desktop effects, however when i boot regularly, the desktop effects are off and do not work.ATI radeon mobile graphics HD4200; opensuse 11.3
View 1 Replies
View Related
Jul 2, 2010
I hope this is the correct section. I have recently updated to 10.04 and now Compiz/desktop effects wont work. When I try to turn visual effects on I get a message saying they could not be enabled. I'm a bit new to all this so not sure if I'm doing something wrong.I've looked at many threads regarding this problem and nothing they say has worked. iv tried using Hardware Drivers (in systems administration) but this says "no proprietary drivers are in use on this system".
Also I don't know whether this effects anything but when I open NVIDIA X Server Settings (in systems administration) i get a message saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."Does anyone know how I can get Compiz/desktop effects working?.
View 6 Replies
View Related
Jun 26, 2009
I'm a Fedora 11 user.....
When I try to enable Desktop effects it says:
Desktop effects could not be enabled.
I've installed compiz and the problem is still there.
View 7 Replies
View Related
Jan 19, 2011
Im a new member here.So please don't get mad at me.If i posted on a wrong section(Am I in the right section?) By the way,Here is my problem. My graphic card is Intel 82852/82855.And it passes the Ubuntu Desktop Effects requirement. I am aware of enabling the graphic card in Ubuntu 10.10, Since enabling the drivers was successful. I enabled the desktop effects.After i switched to Normal(Graphic Mode)the screen went blank. Then after i clicked ALT+TAB. there is an option to keep this option or not.I clicked Keep this settings. Then i proceeded in Web browsing(because i'm a web addict). Then i click CTRL+ALT+LEFT/RIGHT For the workspaces to switch. Then i found this 4 square transparent with black margin boxes.Which has a weird distorting effect.That effect is going crazy. Then i rebooted(Hoping to fix the problem).Then it is still there.
View 1 Replies
View Related
Feb 17, 2011
I am unable to enable desktop effects on ubuntu 10.04 32bit desktop , after installing Nvidia developer drivers 260.19.26. The output is shown below:
1)nvcc -V
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2010 NVIDIA Corporation
[code]....
View 1 Replies
View Related
Jan 25, 2010
i am using DELL XPS STUDIO 1650 with configuration
Processor
Intel Core2 Duo Processor P8700 (2.53GHz/ 1066 FSB/ 3MB Cache)
Memory
3GB (2 X 2GB) Dual Channel 1066MHz DDR3 SDRAM
Hard Drive
320GB 7200RPM SATA Hard Drive
Video Card
512MB ATI Mobility Radeon HD 3670
Wireless Network Card
Intel WiFi Link 5100 (802.11a/g/n) Half Mini-card
i have installed the new 11.2 OS, every thing went well until i switched on the desktop effect, when i clicked the apply button the whole system freezed, i had to manually switch of the system and re-started. everything went well until the username and password was entered, at the time of the progress bar the system dint respond, but the curser was moving but very slow moment was observed. i tried to repair the system with the repair system option, i tried repairing the file system i got the following error after pressing the help button
"error detected
the Ext4 file system of the partion /dev/sda6 is corrupted. to repair the file system, press repair"
and the second sda7 with the error "the Ext4 file system of the partion /dev/sda6 is corrupted. to repair the file system, press repair"
i pressed the repair button but nothing happen. and i even tried to re install the OS, the same problem exists.
View 1 Replies
View Related
Mar 24, 2010
I'm wondering if anyone is having a similar problem as mine when running Hulu Desktop. The application starts fine, but when I try to select anything to watch, the green progress bar continually resets over and over again as it tries to buffer a video, and playback never starts as a result. This happens for low, medium, and high quality. Hulu Desktop was working perfectly fine a few months ago. I've always been running Ubuntu 9.10 (64-bit) with the latest 64-bit Flash pluggins, and didn't have a problem before. Running Hulu Desktop from the command line doesn't reveal any error messages either.
View 7 Replies
View Related
May 31, 2010
I recently setup an ssh tunnel and wrote a script to connect to my Home PC from my laptop no matter where I am.
I have previously tested this on my own network and multiple other networks while I was over at my friends houses, and it worked completely fine.
So just now I decided to use it after about a day or two after not using it and now nothing happens. Normally it prompts me for a password and takes about 5 seconds then I am in.
I'm using openssh, vinagre, and dyndns for the hostname. Here is the script:
Code:
View 9 Replies
View Related
Jun 8, 2010
Remote desktop viewer has stopped working in ubuntu 10.04. When I click on the icon in the top panel. The message Starting Remote Desktop viewer appears in the bottom panel for about 20 seconds and then it disappears and nothing further happens.
Yesterday I disabled ipv6 which greatly speed up thunderbird email and coincidently solved a problem I was having with Google earth not connecting to the server.
I do not know if this is what is now causing the problem with Remote Desktop viewer.
View 1 Replies
View Related
Mar 8, 2011
I have a remote desktop app for my ipod that i use every now and then, but after about a week and a half of not using remote desktop on either my ipod or my computer, it seems to have stopped working. the problem is with my computer rather than my ipod. when i go to menu>system>preferences>remote desktop, the area where it is supposed to give you the ip address, or whatever it is to connect remotely, is no longer a number, but just the word "localhost". i only saw this after my ipod told me it could not find the host, so i checked and thats when i saw localhost. putting that into the remote desktop app did nothing, so i tried my ip address and that didnt work either. clicking on "localhost" brings up evolution mail which wants me to send it as an email, strangely. not sure whats going on here.
View 2 Replies
View Related
May 26, 2011
I don't know why but show Desktop Ctrl-Alt-D suddenly stopped working for Firefox only (in all workspaces).
Any ideas what might have caused this? Any work-arounds? (apart from Ctrl-Alt-(arrow) / switching to a different workspace - which is a fair workaround)
View 1 Replies
View Related
Feb 28, 2009
I do not know how it came to pass, but it has come to pass. I was in the process of updating my desktop Fedora 10 (KDE) system with yum, when I finished that I got a message about
Quote:
I have no clue what this means.
View 8 Replies
View Related
Oct 11, 2010
Well I guess the topic says it all. I've recently upgraded to Maverick from Lucid all went smoothly until i restarted and realized that the remote desktop server included stopped functioning all of a sudden. tried other vnc servers with no luck.
View 9 Replies
View Related
Jan 21, 2011
I am running Suse 11.0 and the system had stopped working. I booted from the disk and chose repair system. Now I can get to the Give root password for login and it accepts the password, but I get the line
(repair filesystem) #
View 3 Replies
View Related
Jun 20, 2010
My main PC has AN Athlon X2 4600+ on an Asus M2npv-vm. Has been working fine for ages running Ubuntu. Today it the system locked up and I had to do a reset. Since then it will not connect to the router or cable modem. I can connect another PC to the router, so that looks okay.
What can I do to test the network connection from Ubuntu? It's not even getting an IP.
I suppose it could be something has died in the hardware, but want to eliminate other possibilities first.
View 2 Replies
View Related
Jan 5, 2010
I'm running Kubuntu 9.10 (Karmic), and my System Monitor (a.k.a. Task Manager) has stopped working. I had been using the graphical version of the app because it was easier and faster for me to deal with. I know that there is a command line solution for this, but I also know it involves having to know the task number of the program I want to kill (I've got a game that I love to play, but only closes cleanly about 10% of the time). I've posted a couple of screen shots to show the errors... The first one is the error message itself (I have to hit 'OK' on this twice to clear it), and the second one is the resulting empty window of the System Monitor
View 5 Replies
View Related
Oct 2, 2009
fter I enable the desktop effects on KDE, everytime that I login in to a session,KDE crash.... Im just gettin a black screen.My question is. Can I turn off the desktop effects by editing a file? if so, which file do I need to edit.... and where is the extensive directory tree i can find a the file that holds information about kde crashing "error file or log file" were I can get more info in what is happening with KDE and find out why is crashing.
View 2 Replies
View Related
Oct 6, 2009
Desktop Effects could not be enabled. Also, I'm not having any luck installing Catalyst drivers. After installing Catalyst driver for the right kernel version, Xorg goes corrupt when starting up.Kernel: 2.6.30.8-64.fc11.i686.PAEVideo card: ATI Technologies Inc Mobility Radeon HD 3450$ glxinfo | grep renderdirect rendering: YesOpenGL renderer string: Software Rasterizer
View 3 Replies
View Related
Nov 4, 2009
I ran "sudo yum install compiz-gnome" and when I run "desktop-effects" and click "Enable desktop effects" it just takes me back to the login screen.
View 1 Replies
View Related
Nov 18, 2009
I have installed Fedora 12 on my laptop (Lenovo X61s) and now I have some problems with my OS. Please help me to config my machine.Currently I can not enable Desktop Effects any more. I receive this message: "Accelerated 3D graphics is not available. Desktop effects require hardware 3D support."
I'm sure that I could enable the functions of compiz when I used fedora 11 and Fedora 12-beta on my laptop before.Besides, when I represent my slides, I can not see my screen on my laptop any more. It's dark. When I used Fedora 12-beta, I can see my screen and another screen for my representation.Is my Fedora lack of some necessary packages? Is it necessary to reinstall the VGA driver? How can I do?
View 1 Replies
View Related
