Ubuntu :: 10.10 Desktop - Firefox Not Working Fine
Nov 10, 2010
I downloaded the 10.10 desktop version. Everything seems to work fine except Firefox. Sure, I can get on, but getting out is something of a chore. Half the time the page freezes and won't allow me to try anything else.
I tried: Clicking on the red "X" = nothing
Right-clicking on the page and selecting "Back" = nothing
Right-clicking on the task bar and selecting "Close" = nothing
Restarting the computer = nothing
The only way to get out when that happens, is to hold down the "Power" button. I know it's not good for the computer, but being held hostage in Firefox is not good for my patience. Even that is a crap-shoot. Sometimes it boots back up fine, only to resume what happened before the power went out when I log back into Firefox. Sometimes it won't let me out until I scan back to the main page by using the arrows one page at a time. This kind of thing never happened when I had the 9.04.
View 3 Replies
ADVERTISEMENT
Jul 22, 2010
Ubuntu and after installing it i can't browse any internet through firefox although ping is working good and downloading plugins to system to run MP3 or videos is also working fine but can't open any website through firefox and i tried the live cd of Ubuntu 10.4 at other PC and internet was working fine and firefox was working fine
View 3 Replies
View Related
May 26, 2011
I don't know why but show Desktop Ctrl-Alt-D suddenly stopped working for Firefox only (in all workspaces).
Any ideas what might have caused this? Any work-arounds? (apart from Ctrl-Alt-(arrow) / switching to a different workspace - which is a fair workaround)
View 1 Replies
View Related
Jul 23, 2010
I don't have any connection issues, but Firefox always starts in offline mode. I can uncheck it and everything works fine. If I close and reopen it Firefox switches back to offline mode.
View 4 Replies
View Related
Jan 10, 2011
I have Slackware 13.1 with kernel 2.6.37. Everything is working fine, except that I can't mount any CD/DVD and automount is not working either. If I connect any USb to my laptop it doesn't automount, I need to manually mount it. The same case happens with CD/DVD only that I can't mount any CD/DVD even manually. Here's the output:
Code:
bash-4.1# mount /dev/cdrom /mnt/cdrom
mount: block device /dev/sr0 is write-protected, mounting read-only
[code]...
View 14 Replies
View Related
Sep 7, 2010
Ok so I have recently purchased my VPS and I have installed the wonderful "Ubuntu 10.04 32bit". I have installed VNC fine and I can connect to the Remote Desktop with a GUI.Im looking to run "RsBot" but im unsure on how to run Java. I am really stuck and I was wondering how I can install java as when I try and run the setup it just open the folder up..currently installing OpenJDK Java 6 Runtime, ill update you when its done.
View 3 Replies
View Related
Mar 12, 2011
title says ist all: downloaded and installed the current FP-DEB from Adobe and installed it via GDebi.Result: Firefox (3.6.15) doesn't play any videos anymore (shows "need to upgrade...")But: the FP is installed properly, as seen by Opera using it just fine.Any ideas how to tell Firefox where to find it?I have found '/opt/firefox/plugins/flashplugin-alternative.so' and I have copied it as '/opt/firefox/plugins/libflashplayer.so' to no avail.
View 2 Replies
View Related
Jan 3, 2011
I have a home server running Ubuntu Server 10.10, it is running Samba for file sharing with a mix of Windows and Linux boxes in my house. My main problem is that the server is only accessible by IP or by using hostname.local, but it is not possible to connect to it by just typing the hostname. Further more, it is not being automatically discovered and listed by Windows or Linux clients.
What's really odd is that I also have an Ubuntu Desktop 10.10 install on a separate computer, and that computer is accessible using just the hostname and is automatically being discovered and listed by other computers.
What is missing on the server? What is responsible for resolving just hostname, avahi seems to only deal with hostname.local and that is working fine. I also compared the samba config of the desktop and server Ubuntu installs but wasn't able to find any setting that would be influencing this. Is there some package I'm missing on the server?
View 9 Replies
View Related
Oct 4, 2009
Before creating a DVD of an old movie, I tried to free up some hard disk space by burning a batch of old cartoons (Betty Boop, from the '30s.) to a data DVD, and deleting the directory after making sure the burn was good. The burn went fine, and the disc ejected correctly. (This is an important point!) I immediately re-inserted it so that I could check the contents, as I've done many times before, but it never showed up on my desktop.
(F10 with Gnome) I opened Nautilus and found two copies of the DVD listed, and both context menus listed both Mount and Eject, as though Gnome wasn't sure if it was or wasn't mounted. Checking, neither shows up in /media, /mnt or /etc/mtab. At this point, I can no longer mount it or any other disc. I've tried logging out and logging in, with no change. I'd consider a reboot, but my uptime has quite literally reached Biblical proportions and I hate to waste it if I don't have to. How to tell Fedora to let go of a DVD that isn't in the drive any longer?
View 1 Replies
View Related
Oct 27, 2010
How to speed up the menu "fade" (or get rid of it all together) in desktop effects? I need a composite manager for docky but the slower response on menus annoys me as they have to fade in and out. Anyone know which key in apps -> compiz I should change? Is it one of the plugins or one of the general keys?
View 5 Replies
View Related
Sep 2, 2010
Ok, i bought this usb wifi adapter: [URL]
used these drivers(dident work at all without it, no lights even): [URL]
and i first tryed it out on my netbook (aao, intel atom ubuntu 10.04 32bit), i ran make, then make install, done! i pugged it in and im happly using a 300mbps wifi network.
then i try it on my desktop (custom, AMD phenom x4, ubuntu 10.04 64bit), i install, no errors, then when i plug in the wifi usb, it lights up, then stops, the mouse also stops working(bouth keyboard and mouse is usb) but the kb still works. aftor restarting keeping it pluged in, ubuntu never finishes the splash screen, just stops their, i try again without the wifi and it works, i keeped trying and now the whole comp frezes, even the kb, and i see the system monetor is also frozen, what do i do?
one last thing, it works on bouth my netbook and desktop under windows 7, only on my desktop it wont work on ubuntu.
View 5 Replies
View Related
Jan 10, 2010
I have downloaded the recommended NVIDIA driver for my Quadro FX 1400 graphics card which has 256 MB RAM. I have my laptop in a docking station and from the docking station is a DVI to HDMI converter then HDMI cable to my TV (the idea is to use it as an internet TV slave! ). When I come to configuring the NVIDIA X Server, it correctly detects both my laptop screen and my TV via the HDMI connection. However, when I come to save the settings for the X server and go to restart it, it cannot save the configuration file. This is most annoying as it does not allow me to use the dualview I need.
The second problem comes when I use something like the BBC iplayer or anything that uses the flash player. I have the latest flash player with Firefox which works fine in non-full screen mode. However, when switching to full screen, the CPU load jumps to 100% and the playback is really jerky. Had this running the beloved windows XP before and could handle full screen no problems. I have seen a few posts here which show workarounds to zoom in on the small screen on Firefox but would prefer to run it in the full screen mode.
View 2 Replies
View Related
Jan 23, 2010
I'm having some problems with flash in mozilla and chrome. video playback is fine but none of the buttons are working.for example i cant pause or change the volume. pretty sure my flash is up to date. i have ubuntu netbook remix on another pc without this same problem.
View 8 Replies
View Related
Feb 17, 2010
Actually we are use windows n fedora flavors running g2ipmsg (lan messenger) to communicate in cross platform but one of the machine having g2ipmsg is not working fine. It always gets hangs when we open or minimize ipmsg window. i had tried deleting the source file and tried to install new one but it never fix the problem
NOTE: i guess lib file got affected but im not sure.
View 4 Replies
View Related
Jun 13, 2010
so when ever i log on to my new install of ubuntu, i get a white background.when i open the choose desktop background, This happens: does anyone knows whats going on?
View 1 Replies
View Related
Jun 11, 2010
I thought that setting up the PATH variable was a must if we wanted to use java or javac commands on linux (preferably in the bashrc file), but I am able to use these commands anywhere without setting up the PATH variable.. Similarly, without specifying . in the CLASSPATH variable (in fact, not specifying the CLASSPATH variable at all), I am able to access class files in the same directory. How is it possible ?
View 1 Replies
View Related
Dec 27, 2010
I'm having problems installing or removing anything from Debian. The whole problem has kind of looped for me for half a day now.
I installed Debian with the latest release and when I booted into the system, everything was working fine except the screen was blurry. So I spent a few hours looking for a way to install nvidia drivers. Trying to used the nv drivers, (vesa before) caused gdm to stop working with "no screen found" errors and when i finally installed the nvidia drivers, it seems to have reverted my kernel back. I was at 686 before and now I'm on 486, giving me an extra option between 486 and 686 in grub.
This was fine to me but when I boot into the 486 I get notifications about updates close to a gig in download size. I didn't want to download it in fear of breaking the system but did after package manager would refuse to install or uninstall anything without installing/uninstalling the gigs worth of updates.
During the update, my screen kind of malfunctioned and i rebooted going into ctrl+alt+f1. When I came to, the gdm wouldn't start, kind of looping to the login screen and blanking out, never fully drawing it. I tried a few configurations in /etc/X11/xorg.conf to no avail and decided to try the 686 configuration.
Xserver wouldn't boot with noscreens found untill I decided to try to install the same nvidia drivers. While I was still on the 686 kernel, it would not boot but when I rebooted and went into the 486 kernel, it logged back in to what seemed before updating.
View 2 Replies
View Related
Jan 4, 2011
I've installed the screencaster recordMyDesktop, but the program isn't working fine.
View 1 Replies
View Related
May 18, 2011
I have a DSL connection attached to a wireless router at home which at the moment working fine on my windows laptop. However I have problems connecting to the internet via my desktop which has fedora on it and TP-Link PCI Wireless card. The connection with the wireless network keeps restarting, disconnecting and reconnecting and when it is connected either no internet or very slow sluggish internet barely loading the webpage title.
I installed Ubuntu and the same problem is happening.Yesterday However everything was working fine even on the desktop.
When I first installed Fedora about 4 days ago I had the same problem but when i restarted the computer everything worked fine. Restarting the machine does not seem to solve the problem now.Please help me diagnose the problem here as it's really hard for me to extend a cable from my desktop to my router. And I need to internet on my Desktop.
View 8 Replies
View Related
Jun 11, 2010
I thought that setting up the PATH variable was a must if we wanted to use java or javac commands on linux (preferably in the bashrc file), but I am able to use these commands anywhere without setting up the PATH variable.. Similarly, without specifying '.' in the CLASSPATH variable (in fact, not specifying the CLASSPATH variable at all), I am able to access class files in the same directory. How is it possible ?
View 4 Replies
View Related
Feb 10, 2010
I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
View 8 Replies
View Related
Oct 2, 2010
I have a dual boot config with
sda1 /boot
sda2 Win7
sda3 /
sda4 Truecrypt Partition
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)
View 1 Replies
View Related
Mar 28, 2011
I have an old averatec machine (3200 series) Slackware 12.2 is working fine out of the box (13.1 is not even booting after installing, so i decided not to work in this direction) except for the wireless. the wireless is working some seconds after putting the interface up, later stops working, and if you mess around a little with the interface, the computer will hang (caps and num lock will flash and thats all) I tried diffferents kdrivers (right now i downloaded the latest linuxwireless and im using those drivers) same situation. was working fine with kernel 2.24 and old drivers (the iface wass called ra0, right now is wlan0) I know this is not much information, but i will try to get another pc to make a ssh and beeing able to get some traces.
View 5 Replies
View Related
Jun 22, 2010
I have this regular expression
Code:
(@description ").*(";)
I want to match anything in between the quotes its working fine in JavaScript but its not working in my python program:
Code:
#!/usr/bin/python
# -*- coding: iso-8859-1 -*-
import re
[code]....
View 3 Replies
View Related
Sep 30, 2010
I have had my computer set to dual boot Windows 7 for months now with no issue. Now today when I logged on to Slackware (13.1 x86_64) it suddenly stopped recognizing that my Windows 7 drive has anything on it. Fdisk cannot see any partitions anymore. Yet I can reboot the computer and run Windows 7 off it just fine. The windows drive should be /dev/sdb with sdb1 being its system reserved partition and sdb2 being the actual Windows partition.
Dmesg sees that it is there like my other drives, but it appears that the Windows 7 partition is not unaccessable to anything in Linux.
How could this work yesterday yet today it doesn't? I didn't change anything.
View 7 Replies
View Related
Dec 25, 2009
After trying at least a dozen distros, I'm a happy OpenSuse user now and hoping to stick to it for some time now. I am running it on HP DC7800 workstation and the performance is superb. One problem I have is that my sound is not working. If I plug-in the headphone to the front jack, I sear sound just fine but nothing from internal speakers. Here are some details:
Code:
maliks@maliks-suse:~> cat /proc/asound/card0/codec#0 | grep Codec
Codec: Analog Devices AD1884
Code:
maliks@maliks-suse:~> rpm -qa '*alsa*'
alsa-1.0.21-3.2.i586
alsa-plugins-1.0.21-3.3.i586
alsa-oss-1.0.17-25.2.i586
alsa-utils-1.0.21-3.1.i586
Code:
maliks@maliks-suse:~> rpm -qa '*pulse*'
libpulse0-0.9.19-2.3.i586
libxine1-pulse-1.1.16.1-7.6.i586
Code:
maliks@maliks-suse:~> rpm -q libasound2
libasound2-1.0.21-3.2.i586
Code:
maliks@maliks-suse:~> uname -a
Linux maliks-suse 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 i686 i686 i386 GNU/Linux
Code:
maliks@maliks-suse:~> cat /etc/modprobe.d/50-sound.conf
options snd slots=snd-hda-intel
# u1Nb.ET0nFMtnEEF:82801I (ICH9 Family) HD Audio Controller
alias snd-card-0 snd-hda-intel
The Link where I've uploaded my /usr/sbin/alsa-info.sh output: [URl]
View 2 Replies
View Related
Mar 12, 2011
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
View 9 Replies
View Related
Mar 29, 2010
I have searched around a bit for a knetwork manager issue I am having on my opensuse 11.2 32 bit install. My wireless card is an 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) I am currently using the Broadcom wl driver
I am on the Internet with this machine as I am typing using the older "ifup" method. I am having great difficulty connecting to the Internet when I use knetwork manger though. The strange part is when I am connected to my router with knetwork manager, I can log into my Router, but I can not get to any web-page/ping any outside address.
so far the best (I was able to locate) advice I was able to get is located in this post. < Broadcom wireless, partchy internet - openSUSE Forums > following a posted how to to disable IPV6 (I suspect this may be the issue??), I was unable to locate modprobe.conf, or modprobe.conf.local, even after I updated via updatdb. I gave a shot at entering in "disable_ipv6=1" into "menu.lst". However, this did not solve my issue with knetwork manager. If my network information is needed when I am "connected" utilizing knetwork manager
View 9 Replies
View Related
Aug 7, 2010
I am running Ubuntu 10.04 on an AMD64 computer with an ATI Raedon x1250 graphics card.
Everything runs fine for about 3 hours, then it will randomly stop working.
Symptoms:
Mouse stops moving for 10 seconds.
Screen goes white.
Speakers start repeating last 10 seconds of whatever was playing.
Screen goes orange or purple with lines across it and random symbols...
At that point I hardware restart my computer and all is fine again
dmesg yields the following after every crash
Quote:
Quote:
View 9 Replies
View Related
Oct 1, 2009
This is my startup routine:
I log on and Network Manager shows no wireless adapter.
I go to System > Administration > Network:
There are two entries in the Devices tab: Wireless and Ethernet
As soon as I double click the Wireless device and the configuration pops up, the device starts working (no changes to the settings are made)
I have the following set to ON:
- Controlled by Network Manager
- Activate device when computer starts
- Allow all users to enable and disable this device
View 7 Replies
View Related