I am trying to make my elastix voip server to send and receive e-mails. It has built in Postfix mail server, and i tried to configure it.I am not sure about some parameters, such as domain and hostname.Either way, i will attach my config file and the errors that i get from log and mail queue as i get them from webmin.
View 7 Replies
Let me start off by saying I am experienced with computers, though my knowledge of Linux and networking is limited. I've just recently started setting up a Ubuntu 10.04 server to be a SMTP server. I've followed this guide by the letter: [URL] What I've attempted, to test the server, is the following:
telnet localhost 25
ehlo localhost
(this returns all the desired information) I then do a MAIL FROM my domain which is accepted, and try to do a RCPT TO an external mail server (gmail) to test sending an email. I am then told 'Relay Access Denied'. I'm sure that there's something fundamental that I'm either not understanding or not doing correctly. I simply want an SMTP server that can send to other domains. What do I need to do?
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
I'm on Ubuntu 10.04 and using Postfix 2.7 with Dovecot's SASL. The issue is when sending e-mail it takes a bit of time to send. LIke for it to get connected it takes around 15.20 seconds. How can I reduce this delay so it can be sent faster?
View 2 Replies View RelatedI have spent the last 24 hours searching the internet for an issue to resolve my problem. I have tried the verious solutions posted by people and followed endless amounts of tutorials
In the end i followed [URL] line by line
This allowed me to recieve email fine, but only send email locally.
I either get a "Relay access denied" message, or as of last night is is now "Recipient Address Rejected"
Below is a link to my Main.cf file
[URL]
I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:
[Code]....
Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
recently i configure postfix on my fedora core 9 system i want to send mail from one user to another till now i did not create any user, i just configure the main,cf file with the help of some link i found on internet
here is my main.cf file
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code]...
i dont know what i should write about my main.cf file so i post the whole file here.
so can anyone tell me is that the configuration is correct and and how do i create new user to my domain name and how can i send and receive mails from one user to another user using postfix
My problem is that I cannot send mail with postfix. For all mail I get connection timeout Example: (delivery temporarily suspended: connect to [URL] Connection timed out)
View 13 Replies View Relatedtelnet localhost 25 when rcpt to:mike@test.com ,report error: 451 4.3.0 <lisi@test.com>:Temporary lookup failure
View 1 Replies View RelatedI'm having a problem with Postfix sending email. To be more specific, Postfix sends mail perfect but when my web server running webmail (RoundCube) connects to my mail server to send email, it fails & there is nothing in the logs that explain to me why:
Code:
Jan 8 11:53:02 mail dovecot: imap-login: Login: user=<carlos>, method=PLAIN, rip=192.168.0.201, lip=192.168.0.200, mpid=2161, TLS
Jan 8 11:53:02 mail postfix/smtpd[2162]: connect from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: setting up TLS connection from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: Anonymous TLS connection established from
[Code]...
I have recently installed the ISPCP web hosting control panel. It seems that after a while running and testing I can receive but I cannot send e-mail. basically I get an error which goes
Code:
postfix/smtp[5939]: connect to alt1.gmail-smtp-in.l.google.com[72.14.213.27]:25: Connection timed out
I have, in the recent past, been able to send e-mail so I know that there is something that has gone wrong with my configuration, which I cannot. I post here my master.cf and my main.cf files as well as the mail.log file and the mail.warn....
Ubuntu Server 8.04 LTS 64x
spCP 1.0.4 OMEGA
build: 20100228
Codename: Priamos
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
i installed a new server ubuntu server 9.10 with lamp, etc.
after which i followed the following tutorial to setup
Postfix, DoveCot, Squirell
[URL]
It was working fine till here. After which i installed the spamassain which also got configured perfectly.
I can send only 1 or 2 mails after which i get error
here is my confid file of postfix
Quote:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code]....
i am trying to set up a mail server that will support users in a LAN in my school. I am using postfix on a Mandrakelinux distro.
I can send mail when I am root to the other user on my (same) machine both when in command line (mail command) and on Graphical mail client (Kmail ) but the user (sam) cannot send mail to the root account on either interfaces.
I followed the postfix configuration settings on John_Wiley_-_Redhat_Linux_Networking_and_System_Administration_3rd_Edition.
I just configured my first postfix mail server today. Everything is working correctly except for the fact that on all outgoing emails instead of the mail format being user@mydomain.biz it says user@hostnameofpostfixserver. I've looked everywhere I can think and I cant see where I'm substituting the host-name of the server for the domain name of my email. Where else could it be?Below is my main.cf. I am running ubuntu 9.10.# See /usr/share/postfix/main.cf.dist for a commented, more complete version# Debian specific: Specifying a file name will cause the first# line of that file to be used as the name. The Debian default
View 2 Replies View Relatednstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Code:
[root@srv-estudio:~]telnet mail.site.com 25
Trying 200.40.xx.xx..
[code]...
I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
We are using postfix for relaying our internal system generated mail to other domain through google apps. All client servers able to send mail through the postfix server, only user of local postfix server(root, etc) unable to send mail with command like mutt, mail.My detail configuration given below:
Code:
postconf -n
output
Code:
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
[code]....
I want to configure Postfix mail server to send bulk mails to others domains only but they could not send to me. steps to configure Postfix to send bulk mails and what packages required for it.
View 2 Replies View RelatedThe scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
[Code]....
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I want postfix to send me the root mail to an external account, but I never do it and I don't know how to do it, anyone can explain me how to do it?
View 1 Replies View Relatedmy server is Redhat as 5 + postfix +Dovecot .when i use smtp to send mail，it can't to send,the system return "relay access denied" ? This is my maini.cf
Code:
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code].....
i have a website, there is a button that u click fill out a form and sends u a link to download a trial version of our software, the message gets sent with out html.. i copied a sample below (edited out some personal info)
Code:
Content-type: text/html; charset=iso-8859-1
From: ******.com>
[code]...
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedI have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI handle several hundreds of domains. Mails are handled with google apps (but previously I used to have a full postfix/courrier setup with virtualhosting). Now what I need is to be able to send mail (newsletter etc...) from my web servers, but I don't need to receive mail on these servers.
View 4 Replies View Related
