Software :: Postfix With Dovecot On Ubuntu 9.10 Mail Send Error
May 8, 2010
i installed a new server ubuntu server 9.10 with lamp, etc.
after which i followed the following tutorial to setup
Postfix, DoveCot, Squirell
[URL]
It was working fine till here. After which i installed the spamassain which also got configured perfectly.
I can send only 1 or 2 mails after which i get error
here is my confid file of postfix
Quote:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code]....
View 1 Replies
ADVERTISEMENT
Apr 18, 2011
nstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Code:
[root@srv-estudio:~]telnet mail.site.com 25
Trying 200.40.xx.xx..
[code]...
View 4 Replies
View Related
May 15, 2010
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies
View Related
Mar 10, 2011
I do not know why I could send email outside but not receive. I use relay to my ISP that port 25 is blocked by my ISP. What can I doing with configuration when it should be works to receive mail? Okay, I have sent a test e-mail between localhost and it works. I can send from mailserver to my gmail without problem. So why I cannot receive email from gmail?
View 2 Replies
View Related
Jun 30, 2011
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
View 6 Replies
View Related
Nov 19, 2010
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
View 9 Replies
View Related
May 4, 2010
I'm somewhat familiar with Linux and became pretty decent at installing and configuring packages in Ubuntu. One of the things I was able to do with my tinkering was set up a functioning imap and pop3 mail server using dovecot-postfix. Now I'm experimenting with Slackware to get the feel of another distro, and I noticed that the mail server packages were already installed. On my client computer they can pick up that I have users configured and my mx record is working.
However it is failing to send mail saying that it is failing to relay the e-mail message and that the server responded 5.7.1 which was a problem that I was having in Ubuntu when first configuring the mail server. The fix was to edit the postfix.conf file and adding the localhost name of my server. Does anybody know of the file that I need to edit to make it possible to relay my messages with both pop3 and imap.
View 1 Replies
View Related
Mar 11, 2010
recently i configure postfix on my fedora core 9 system i want to send mail from one user to another till now i did not create any user, i just configure the main,cf file with the help of some link i found on internet
here is my main.cf file
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code]...
i dont know what i should write about my main.cf file so i post the whole file here.
so can anyone tell me is that the configuration is correct and and how do i create new user to my domain name and how can i send and receive mails from one user to another user using postfix
View 118 Replies
View Related
Apr 4, 2010
My problem is that I cannot send mail with postfix. For all mail I get connection timeout Example: (delivery temporarily suspended: connect to [URL] Connection timed out)
View 13 Replies
View Related
Jan 21, 2011
telnet localhost 25 when rcpt to:mike@test.com ,report error: 451 4.3.0 <lisi@test.com>:Temporary lookup failure
View 1 Replies
View Related
Apr 23, 2010
I am trying to make my elastix voip server to send and receive e-mails. It has built in Postfix mail server, and i tried to configure it.I am not sure about some parameters, such as domain and hostname.Either way, i will attach my config file and the errors that i get from log and mail queue as i get them from webmin.
View 7 Replies
View Related
Jan 21, 2011
I'm on Ubuntu 10.04 and using Postfix 2.7 with Dovecot's SASL. The issue is when sending e-mail it takes a bit of time to send. LIke for it to get connected it takes around 15.20 seconds. How can I reduce this delay so it can be sent faster?
View 2 Replies
View Related
Feb 9, 2011
I have spent the last 24 hours searching the internet for an issue to resolve my problem. I have tried the verious solutions posted by people and followed endless amounts of tutorials
In the end i followed [URL] line by line
This allowed me to recieve email fine, but only send email locally.
I either get a "Relay access denied" message, or as of last night is is now "Recipient Address Rejected"
Below is a link to my Main.cf file
[URL]
View 3 Replies
View Related
Jan 8, 2011
I'm having a problem with Postfix sending email. To be more specific, Postfix sends mail perfect but when my web server running webmail (RoundCube) connects to my mail server to send email, it fails & there is nothing in the logs that explain to me why:
Code:
Jan 8 11:53:02 mail dovecot: imap-login: Login: user=<carlos>, method=PLAIN, rip=192.168.0.201, lip=192.168.0.200, mpid=2161, TLS
Jan 8 11:53:02 mail postfix/smtpd[2162]: connect from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: setting up TLS connection from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: Anonymous TLS connection established from
[Code]...
View 7 Replies
View Related
Jun 10, 2010
I have recently installed the ISPCP web hosting control panel. It seems that after a while running and testing I can receive but I cannot send e-mail. basically I get an error which goes
Code:
postfix/smtp[5939]: connect to alt1.gmail-smtp-in.l.google.com[72.14.213.27]:25: Connection timed out
I have, in the recent past, been able to send e-mail so I know that there is something that has gone wrong with my configuration, which I cannot. I post here my master.cf and my main.cf files as well as the mail.log file and the mail.warn....
Ubuntu Server 8.04 LTS 64x
spCP 1.0.4 OMEGA
build: 20100228
Codename: Priamos
View 2 Replies
View Related
Aug 9, 2010
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
View 1 Replies
View Related
Nov 5, 2010
Let me start off by saying I am experienced with computers, though my knowledge of Linux and networking is limited. I've just recently started setting up a Ubuntu 10.04 server to be a SMTP server. I've followed this guide by the letter: [URL] What I've attempted, to test the server, is the following:
telnet localhost 25
ehlo localhost
(this returns all the desired information) I then do a MAIL FROM my domain which is accepted, and try to do a RCPT TO an external mail server (gmail) to test sending an email. I am then told 'Relay Access Denied'. I'm sure that there's something fundamental that I'm either not understanding or not doing correctly. I simply want an SMTP server that can send to other domains. What do I need to do?
View 1 Replies
View Related
Jun 22, 2010
i am trying to set up a mail server that will support users in a LAN in my school. I am using postfix on a Mandrakelinux distro.
I can send mail when I am root to the other user on my (same) machine both when in command line (mail command) and on Graphical mail client (Kmail ) but the user (sam) cannot send mail to the root account on either interfaces.
I followed the postfix configuration settings on John_Wiley_-_Redhat_Linux_Networking_and_System_Administration_3rd_Edition.
View 5 Replies
View Related
Sep 16, 2009
I did a a basic install of postfix and dovecot instead of using courier-pop and courier-imap. This is only send and receiving e-mail locally within the test network 10.7.0.X and 10.0.0.X. I used:
[URL]
my postfix.conf is;
PHP Code:
[code]....
This is the error when I send an email from a local machine on the 10.0.0.X network.
PHP Code:
Jan 20 17:05:48 testbox postfix/smtpd[2491]: warning: Illegal address syntax from unknown[10.0.0.111] in MAIL command: <test@10.0.0.112>
View 8 Replies
View Related
Sep 29, 2010
I am running Fedora 10, Postfix and Dovecot I recently changed the password of a user using the 'passwd' command. The problem is that the user can no longer receive their email messages in Thunderbird (Authentication Error). However, they can still login using SquirrelMail and get their mail.
View 2 Replies
View Related
Nov 27, 2010
I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:
[Code]....
Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.
View 2 Replies
View Related
Jan 29, 2010
I just configured my first postfix mail server today. Everything is working correctly except for the fact that on all outgoing emails instead of the mail format being user@mydomain.biz it says user@hostnameofpostfixserver. I've looked everywhere I can think and I cant see where I'm substituting the host-name of the server for the domain name of my email. Where else could it be?Below is my main.cf. I am running ubuntu 9.10.# See /usr/share/postfix/main.cf.dist for a commented, more complete version# Debian specific: Specifying a file name will cause the first# line of that file to be used as the name. The Debian default
View 2 Replies
View Related
Jan 12, 2010
I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
View 3 Replies
View Related
Jul 13, 2011
We are using postfix for relaying our internal system generated mail to other domain through google apps. All client servers able to send mail through the postfix server, only user of local postfix server(root, etc) unable to send mail with command like mutt, mail.My detail configuration given below:
Code:
postconf -n
output
Code:
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
[code]....
View 8 Replies
View Related
Apr 13, 2010
I want to configure Postfix mail server to send bulk mails to others domains only but they could not send to me. steps to configure Postfix to send bulk mails and what packages required for it.
View 2 Replies
View Related
Oct 2, 2010
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only.I had follow this how-to http://www.linuxmail.info/squirrelma...o-in-centos-5/ and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works.I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, i install VM player on it and run CentOS inside the VM Player.I want to do testing on Windows 7 side by installing Thunderbird email client program, i want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How ?
Do i have to do any other configuration on CentOS ? any DNS ? port number for IMAP,POP3 or SMTP ?
View 1 Replies
View Related
Aug 19, 2010
I want postfix to send me the root mail to an external account, but I never do it and I don't know how to do it, anyone can explain me how to do it?
View 1 Replies
View Related
Jan 24, 2010
my server is Redhat as 5 + postfix +Dovecot .when i use smtp to send mail，it can't to send,the system return "relay access denied" ? This is my maini.cf
Code:
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code].....
View 6 Replies
View Related
Feb 3, 2010
i have a website, there is a button that u click fill out a form and sends u a link to download a trial version of our software, the message gets sent with out html.. i copied a sample below (edited out some personal info)
Code:
Content-type: text/html; charset=iso-8859-1
From: ******.com>
[code]...
View 10 Replies
View Related
Nov 15, 2010
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies
View Related
