Ubuntu Servers :: Opportunity To Install The Additional Software During The Initial Setup
Aug 7, 2010
This is my first server installation. I am intending to make this a basic web server for educational purposes. I have installed this server in VirtualBox, everything seemed to go fine besides the fact that I accidentally hit the enter button when I was at the opportunity to install the additional software during the initial setup. I figured that it was no big deal as I could just use aptitude to get what I needed later. My first step was to get LAMP setup. Heres where it started to seem to go wrong: I installed Apache2, however, it seems that I am unable to test it (no browser).
Code:
oliver@DrDoak:~$http://localhost/
-bash: http://localhost/: No such file or directory
oliver@DrDoak:~$
I then proceeded to install php5 again I have ran into trouble when trying to open through GEDIT.
Code:
oliver@DrDoak:~$ sudo gedit /var/www/testphp.php
sudo: gedit: command not found
oliver@DrDoak:~$
View 4 Replies
ADVERTISEMENT
Jun 22, 2010
I have 3 windows computers and just bought linux server. All of them are currently connected to switch. There is also Wireless AP connected to switch and ADSL router connected to switch (yeah, I know its possible to buy a 3in1 but this was bought piecemeal). ADSL is doing the DHCP and I'm not using any other advanced services.
Now, I want to route everything over the linux server. I got the 3 LAN cards for him (one for wireless, one for LAN and one for ADSL) but when I connect everything this way its not working (surprise surprise). I'm following Linux Advanced Routing & Traffic Control HOWTO but its surprisingly sparse on the topic of network setup and i dont know how to proceed now. Since the server will be a choke point I presume I need to setup DHCP server on him? First question is: can I use same netmask on all of these subnets? Ubuntu DHCP server guide uses both static and DHCP and am not sure if I should also use static on some routes or is it ok to use DHCP on all.
Also, when I was installing ubuntu server only one LAN card was used (eth2) so ifconfig shows only lo and eth2, but when I do ifconfig eth0 up and ifconfig eth1 up it doesnt look like its working. Anyway, hope somebody has some tips to point me in the right direction, primarily DHCP server setup and if I missed any steps...
View 9 Replies
View Related
Oct 21, 2010
I am very new to LVM, as well as not especially experienced at linux, and have some questions about how lvm works. A few months back I set up a server running FC10 and tried creating Logical Groups during the the initial setup. We've realized that we are not using all the available space on the physical drive, and I realized that for some reason (I'm thinking this might have been the default?), we initially created two Logical Groups (VolGroup00 and VolGroup01) and it appears two Logical volumes in each (LogVol00 and LogVol01). LogVol00 in VolGroup00 is mapped to /, and the other Group was actually unused. I figure that it would be simplest to just use all this space mapped to /, so I thought the thing to do would be to simply merge VolGroup01 to VolGroup00. I tried this:
[root@office mapper]# vgmerge VolGroup00 VolGroup01
Logical volumes in "VolGroup01" must be inactive
So after a bit of research, I tried this:
[root@office mapper]# vgchange -a n VolGroup01
Can't deactivate volume group "VolGroup01" with 1 open logical volume(s)
So apparently There's an open volume, but I don't know how to go about closing it. I removed the LogVol00 from that group, but LogVol01 won't budge.
[root@office mapper]# lvremove VolGroup01
Can't remove open logical volume "LogVol01"
So how do I go about closing this Volume? At one point, there was some output that told me LogVol01 was being used as swap space. How do I handle that?
View 4 Replies
View Related
Mar 23, 2010
I've installed mailman on 9.10, using apt-get, have apache2 setup already. However I'm getting 403 forbidden issues when trying to access [URL] I may have mucked something up as initially i jumped straight in and created a virtualhost and played around with the URL redirects. but as far as I can see, it's back to its default and it's still not working... When I try to access the page, in my apache error.log, i get this:
Quote:
[Wed Mar 24 02:36:37 2010] [error] [client 192.168.1.1] attempt to invoke directory as script: /usr/lib/cgi-bin/mailman/
I've tried check_perms, it does give this error:
Quote:
root@babel:/etc/apache2# check_perms
/var/lib/mailman/templates bad group (has: root, expected list)
/var/lib/mailman/bin bad group (has: root, expected list)
/var/lib/mailman/cgi-bin bad group (has: root, expected list)
[code]....
View 1 Replies
View Related
Oct 25, 2010
I have created my first linux server using Ubuntu 10.04 server edition. My only experience with linux has been the desktop edition.
The initial trouble I'm having is that this server is on an isolated network without Internet access. I'd like to use a Gnome desktop like I'm used to in order to get up to speed quickly.
How do I get additional packages for a system that is not on the Internet? The end goal for this machine is a simple file depository for a W98 network using Samba shares. To boot from an IDE drive and share a 5 drive software RAID5 for data storage.
View 4 Replies
View Related
Feb 10, 2011
Last night I created a fresh install of Ubuntu Server 10.10. I was working through a tutorial to set up a development server for home use, and everything worked perfectly. I was able to install OpenSSH, Apache, MySQL, and PHP (and Vim) with no problems. I was also able to use "ifconfig" to determine the network address of the server and I was able to view web pages on the server from another machine on my home network, using a browser. So, everything was "peachy". [By the way: The server is connected to the router using a CAT5 cable. This is a WIRED connection] I shut the Ubuntu server down at the end of the night and, now that I have rebooted this morning, I have apparently lost the network interface. I cannot ping anything from the server. If I run ifconfig, only the "lo" configuration is listed, with the 127.0.0.1 address.
[Code]...
View 5 Replies
View Related
Sep 16, 2009
I'm putting a server together and have run into a boot up problem. (I thought about putting this in the server forum, but it might be a more generic problem that others have seen and know how to rectify.) The install seems to have gone just fine. I have the /boot partition on an internal IDE drive. The rest of that drive and another are mirrored in a Raid0 configuration (using the Linux software to do that) for data storage. The swap partition is a part of the Raid5 SCSI array that also has the / (root) partition on it.
After installation it would not finish the booting process. I suspected that GRUB didn't like all the Raid arrays and such, but it seems to be fine. I can say that because the machine will boot into rescue mode with the GUI splash screen and I have access to the whole directory tree. I have already searched on-line and following prudent advice, ran the yum update while in the chroot /mnt/sysimage mode. That only took overnight to download and most of this morning to complete. Still no dice. Used vim to delete the rhgb quiet commands in the grub.conf file so I could see where the kernel seems to be hanging.
So right after the "Creating initial device nodes" is a line about my generic PS2 wheel mouse. So I tried a USB mouse. Got more output so tried swapping out to a USB keyboard. Got a little further with more information about input devices, but still stops. Also, I tried a PCI video card just to make sure the onboard video wasn't the problem - no change. So, if someone in the Fedora community knows what loads up or is configured right after the mouse and keyboard, I might be able to figure out what's causing the computer to hang during the boot process.
View 2 Replies
View Related
Jul 7, 2010
I'm trying to setup puppet to install and configure apache on several servers. Having found: [URL] I thought I was onto something. However I'm a little lost, does anyone know of or can anyone write a small howto on how to get this module working on certain nodes. My current state is puppet is running and connected to the puppetmaster. I can do simple things but the apache install have lost me a little.
View 1 Replies
View Related
Oct 3, 2010
i installed ubuntu server on a 4-hard disk system, i installed with the RAID 10 support that comes with 10.04 server optioon. my raid swap is /dev/md0 and my raid data partition is /dev/md1
hard drives are /dev/sda /dev/sdb /dev/sdc /dev/sdd
the instalation goes fine, from the 8TB im getting 4TB mirrored which is what i want,
but the instalation setup goes up to the point where it asks me to install grub boot loader, There i choose the default option and it does a fatal error.
my main goal is just to make it bootable, any method is welcome. this went beyond my RAID knowledge (more conceptual than technical)
View 2 Replies
View Related
Nov 23, 2010
I'm trying to setup puppet to install and configure apache on several servers. Having found:
[URL]
I thought I was onto something. However I'm a little lost, does anyone know of or can anyone write a small howto on how to get this module working on certain nodes.My current state is puppet is running and connected to the puppetmaster. I can do simple things but the apache install have lost me a little.
View 4 Replies
View Related
Aug 11, 2011
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies
View Related
Feb 10, 2010
I've set up password-less login for user1 on a Ubuntu machine to login automatically into a Fedora box using the publickey authentication method. Everything is working smoothly. Now, there is a user2 on Fedora but he does not have an account on Ubuntu.
I tried to login as user2 from Ubuntu to but got the following error :
Code:
Predictably neither scp or sftp work either. I have several questions as a result.
1.Is the SSH server rejecting user2 login because I am inadvertently using user1 keys (as I am logged in as user1) ?
2. Do I need to have a user2 account on Ubuntu and public/private key authentication setup with Fedora for user2 to be able to login ?
3. Is there a method I can use to password login as user2 from Ubuntu to Fedora (even though there is no user2 account on Ubuntu) AND still keep password-less login for user1 or do I have to have password-less login for both ?
At present the only way to access the user2 account from Ubuntu is to SSH using the user1 account and then su to user2.
View 3 Replies
View Related
Oct 19, 2009
is this command exact or do I replace anything with my own setu
" yum install mysql mysql-devel mysql-server "
who can't tell what has to be changed for "My server name" and "my setup"
View 8 Replies
View Related
Oct 6, 2010
I'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
View 2 Replies
View Related
Mar 14, 2010
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies
View Related
Dec 20, 2009
I've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
View 1 Replies
View Related
Jul 10, 2010
After I upgraded from 9.10 to 10.4 I could see Ubuntu One in the Places menu. (and subsequently have access to my files etc there).I have now installed 10.4 on a new machine (clean install) and I don't seem to have access from 'Places' now. The only way I can get to it is via a web browser.Is it just hidden away somewhere? Or do I need to install some additional packages?
View 1 Replies
View Related
Aug 29, 2011
I'm looking for a way to install kdebase 4.7 with no additional dependencies. My target is home desktop and I only want these : kdm, plasma, ark, dolphin, kdesu, konsole, okteta, kwrite, kate, kmix, ksnapshot. There are things I don't use but they get installed anyway and break kdm if removed. These things are : akonadi, strigi, nepomuk, virtuoso, kfind, kgreeter and a couple of others, including libqtzeitgeist0 and PIM in general. Also I don't want kdm 4.7 features hence I use kdm3 as a login manager. Is there a 4.7 build that doesn't mind the removal of so called base components? If not, is there a 4.4 repo for 11.4?
View 9 Replies
View Related
May 4, 2010
I'm running Ubuntu 10.04 64 bit as a VirtualBox (3.1.6) guest. Every time I try to run apt-get update, I get the following:
[Code]...
View 3 Replies
View Related
Feb 1, 2010
I just got an hp dv4-2145dx and I am attempting to install ubuntu 9.04. I understand that the maximum number of primary partitions is four. The four on this hard disc are the windows one, a tiny one called hp tools, another tiny one called SYSTEM and then the recovery drive. Does this mean that I will be unable to install linux without deleting one of these partitions? Are they all necessary? deleting any since I don't know what they do.
View 4 Replies
View Related
May 20, 2009
I have a user running a retail copy of RH 5 Ent. and isn't sure what package he needs. He is a developer and when installing other instances of RH he just checked off basically all of the packages under development during the initial installer. Now, he's trying to add packages but they require dependencies and he is not able to auto-satisfy those dependencies.
Is there a way that I can get back to that menu during the initial installation and let him check off all the boxes that he wants, or can I have RH auto-install all packages from DVD or install all required packages from DVD?
View 2 Replies
View Related
Nov 15, 2010
I am busy to do some tests using the Adaptec 1430sa hardware raid controler .I started the setup by generating the raid 1 aray and it worked ok .I did the regular setup of Cent Os 5.5 64 bits all worked ok but the system do not boot .When I start the box it enter the minimal grub screen .I tried to install a first time on the MBR like suggested and how it need to be done for soft raid setup .nd I tried to install it on the first cluster from the boot sequence like possible on second choice
View 2 Replies
View Related
Nov 19, 2010
I'm attempting to install Kubuntu on a new laptop but seem to be having some strange issues. It's a Dell Latitude E5410 with 160GB HDD, 2GB RAM and Intel Core i5-520M(2.4GHz). I'm trying to install Kubuntu 10.10. When I restart the machine and boot from the CD for an initial install it seems to hang for a VERY long time. It will eventually get to the boot options (after hours) but seems sluggish. Once the install gets going everything seems decent except for that I can't seem to get it to finish. I know the CD is good since I used it to get Kubuntu on 2 desktops and another laptop in the last 48 hours. I've also burned another CD just to make sure. The checksum was spot on. Does anyone know what I can do to get this remedied?
View 1 Replies
View Related
Mar 21, 2010
wanted to try kubuntu without all the additional programs how to install it?
View 1 Replies
View Related
Apr 27, 2010
when connecting my ipod to my pc it pops up in the left column of rhythmbox and when clicking the ipod icon all the songs on the ipod are visible in rhythmbox. So far so good, I just don't know how I can synchronize my ipod with rhythmbox. Is there a plugin or additional software to install?
View 4 Replies
View Related
Mar 10, 2011
I have a Dell XPS 420 with a 500gb SATA drive on which Windows Vista is installed. I also have an additional hard drive that I wish to install for an Ubuntu installation. Is it possible to create a dual boot system with Windows on the original HD and Ubuntu on the newly installed HD?
Simply put, my computer will have 2 hard drives. The original hard drive has Windows installed. I would like for the second drive to contain the Ubuntu install so that the only thing changed on the original drive is the MBR (I suppose that's how it would work).
View 4 Replies
View Related
Apr 17, 2010
I'm trying to work with Xen for the first time,if I mess up some of the lingo here or if I don't quite make sense. I've been running openSUSE 11.2 since it first was released, and after an initial problem with my video driver, its been working great. I tried to install Xen today, and after the install appeared to complete successfully, it asked me to reboot and boot into the Xen kernel. When I did this, although the system booted up to the command line, it didn't launch KDE. When I try to start KDE manually it tells me that it "Can't connect to X server".
This seems to be roughly the same problem I had when I first installed openSUSE but I can't for the life of me remember how in god's name I fixed it.
View 1 Replies
View Related
Apr 16, 2009
We are brand new to the Linux platform and just learning. So this is what we have done so far, Installed RHEL 5 on a test machine. Says it was succesfully installed. But when it boots it boots to a blank screen with no prompt or gui or anything just a black screen. Does not accept any input or anything.
We are able to get into the GNU Grub and this is what we see
I can enter b for boot
We would like for this to boot to a GUI interface.
We want to set this up as a simple file server.
View 9 Replies
View Related
Apr 14, 2011
Just installed 13.1 64bit on my laptop. In an effort to keep things slim, I neglected to install the 'D' group....didn't figure I would be doing any developing (call me a literalist). I install Wicd and find that Python is a dependency. What is the easiest way for me to make this happen? Should I just install the python txz or will there be more dependencies that could be solved easier with a script?
View 2 Replies
View Related
May 10, 2010
I have installed nautilus-elementary but didn't like it. So I wanted to go back to regular nautilus but the gui items and icons are missing. Only icons left are Backward and Forward buttons. I have removed elementary repository and reinstalled the nautilus but it didn't restore the default nautilus. How can I restore it? Is there any additional packages to install?
View 5 Replies
View Related
