We are brand new to the Linux platform and just learning. So this is what we have done so far, Installed RHEL 5 on a test machine. Says it was succesfully installed. But when it boots it boots to a blank screen with no prompt or gui or anything just a black screen. Does not accept any input or anything.
We are able to get into the GNU Grub and this is what we see
I can enter b for boot
We would like for this to boot to a GUI interface.
I have Lucid running on a Toshiba Portg R500. Last week it started hanging for just over one minute at the initial Toshiba screen. That is, the screen with the Toshiba logo and a series of boot-from options (HDD, CD, Network, USB) along the bottom. I don't know if the machine is even interacting with the OS at this stage. Also, neither Ubuntu nor the machine recognises the CD-ROM tray any longer. As in, I can't boot from CD and I also can't mount a CD when in Ubuntu. I can, however, boot from a USB startup disk (after the one minute delay).
I'm not sure how to collect helpful data on this sort of issue, especially since I can't see any threads that point to similar problems. The only strange thing I did the day this problem started was to forget to unmount a truecrypt-encrypted USB key before shutting the laptop off.
I've reinstalled Lucid but to no avail. I assume that whatever problem I have is a BIOS problem (and so strictly not for here)? As you can imagine though I want to make sure I've accounted for all other possibilities before fooling around with the BIOS.
I am using CentOS outside the GUI envirement and upon initial bootup it does not recognise the USB keyboard or mose is there a way to get them to work and recognize them on bootup?
I am an old linux user (debian,suse and ubuntu) and i installed now fedora on my box to learn something new about other distros.
Fedora 12 is realy nice, but i got some questions about some things.
I installed the nvidia kmod on this way:
Code:
I inserted this in my grub.conf in etc on the kernel line at the end-> rdblacklist=nouveau after install nvidia kmod package no more splash screen while bootup
Code:
This is what happens if i reboot my pc: i see grub then i start or select fedora12 booting i see for a moment some text then i see only a blackscreen and the bottom of the screen a blue horizontal line with the loading status for the fedora x server gnome. if the line is full, gnome apears.
I would like to have no splash screen and to see the console debug output
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
I have RHEL 3 and Win XP Installed in my P.C?I want to uninstall RHEL 3 and install RHEL 9 without affecting XP.how can i do this and also where can i download free RHEL 9 version or any other latest linux distribution for free?
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
I'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
I've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
[root@mda-services ~]# rhn_registerAn error has occurred:exceptions.TypeErrorSee /var/log/up2date for more informationIt asks for the username & password, I provide it, and it bombs out. That log says:
[Mon Jan 11 17:18:04 2010] rhn_register Traceback (most recent call last): File "/usr/sbin/rhn_register", line 82, in ?
I tried installing RHEL5 server edition in my laptop and it couldnt detect the video card and so the installation continued in the blue screen and i didnt get the usual GUI for installation so i discontinued the installation.can anyone help me how to i install this.Pls i am in need of RHEL in my laptop.
I saved on home folder RealVNC server 4.1.3-86 and want to install on Linux.I don't know much about Terminal commands ... Please guide...waiting for your quick response!
I want to Install RHEL 4.7 64 bit on one my server (Supermicro Super Server) having RAID controller1. Intel2. AdaptecWe are using Adaptec.We are using RAID 1 with 2x320GB Hard disksPOINT: If we Install RHEL 5.3 it recognize RAID controller and show single Logical volume of 298 GB, Means working fine but when we try to install RHEL 4.7 it shows two hard disks of 298GB and 298GB,meanz its unable to recognize RAID controller.So, the issue is Driver of it, CD which we got from super micro having driver for RHEL 4 to RHEL 4 update 6We are making our DR site and its necessary for us to Install RHEL4.7 to make it identical.I searched a lot and spent more than three days on it continuously, And still unable to find the solution.
I am not very new to LINUX. I was using UBUNTU for the last 1 year and I have switched to Redhat now because I am thinking of taking a RHCE certification now. Actually the problem is that I am unable to install RHEL 5.2 i386 on my i686 machine, I have bought it recently 1 week ago. I tried to use the boot parameter "linux noprobe" then it said drivers not found after 2 steps when it loads drivers.
When I tried to make a GUI install it hanged after "loading /sbin/loader" and said "kernel panic - not syncing". And when I tried to make a text install it said hanged agin after "loading /sbin/loader" and said something like "Oops: 0000 [#1] SMP". If drivers are needed then when can I get those and how can I install those drivers? here is my hardware information as "lspci" says:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
I just got an hp dv4-2145dx and I am attempting to install ubuntu 9.04. I understand that the maximum number of primary partitions is four. The four on this hard disc are the windows one, a tiny one called hp tools, another tiny one called SYSTEM and then the recovery drive. Does this mean that I will be unable to install linux without deleting one of these partitions? Are they all necessary? deleting any since I don't know what they do.
I have a user running a retail copy of RH 5 Ent. and isn't sure what package he needs. He is a developer and when installing other instances of RH he just checked off basically all of the packages under development during the initial installer. Now, he's trying to add packages but they require dependencies and he is not able to auto-satisfy those dependencies.
Is there a way that I can get back to that menu during the initial installation and let him check off all the boxes that he wants, or can I have RH auto-install all packages from DVD or install all required packages from DVD?
I'm trying to work with Xen for the first time,if I mess up some of the lingo here or if I don't quite make sense. I've been running openSUSE 11.2 since it first was released, and after an initial problem with my video driver, its been working great. I tried to install Xen today, and after the install appeared to complete successfully, it asked me to reboot and boot into the Xen kernel. When I did this, although the system booted up to the command line, it didn't launch KDE. When I try to start KDE manually it tells me that it "Can't connect to X server".
This seems to be roughly the same problem I had when I first installed openSUSE but I can't for the life of me remember how in god's name I fixed it.
Just installed 13.1 64bit on my laptop. In an effort to keep things slim, I neglected to install the 'D' group....didn't figure I would be doing any developing (call me a literalist). I install Wicd and find that Python is a dependency. What is the easiest way for me to make this happen? Should I just install the python txz or will there be more dependencies that could be solved easier with a script?
Has anyone successfully kickstarted a rhel/fedora/centos over HTTPS ? In other words, is it possible to do the rhel/fedora/centos install from running apache with SSL enabled?
I am having an issue with installing OpenSuse 11.2 using an Nvidia 9500GT. I have an AMD X2 64 4200+ processor, 4 gigs of RAM and 250 Gig HD.I was previously using an ATI X1300 but with the issues with 3D and the driver I decided to update my video card. To be clear, OpenSuse installed fine with the ATI X1300 card.
I purchased the 9500GT and installed the card. I then started the 11.2 32bit/i586 install and all goes fine until the install completes. Once you get the warning that the computer is about to restart (after the install completes) the system goes back to the Suse loading screen and then changes to the CLI where I can see what is loading. The last thing I see is that the HAL daemon is starting and then the screen goes black and the system completely locks up.
I have tried this several times using both the 32bit and 64bit KDE versions with the same result. I have tried Mandriva 2010 to see what results I get and it works fine.
I'm attempting to install Kubuntu on a new laptop but seem to be having some strange issues. It's a Dell Latitude E5410 with 160GB HDD, 2GB RAM and Intel Core i5-520M(2.4GHz). I'm trying to install Kubuntu 10.10. When I restart the machine and boot from the CD for an initial install it seems to hang for a VERY long time. It will eventually get to the boot options (after hours) but seems sluggish. Once the install gets going everything seems decent except for that I can't seem to get it to finish. I know the CD is good since I used it to get Kubuntu on 2 desktops and another laptop in the last 48 hours. I've also burned another CD just to make sure. The checksum was spot on. Does anyone know what I can do to get this remedied?
