Just installed 13.1 64bit on my laptop. In an effort to keep things slim, I neglected to install the 'D' group....didn't figure I would be doing any developing (call me a literalist). I install Wicd and find that Python is a dependency. What is the easiest way for me to make this happen? Should I just install the python txz or will there be more dependencies that could be solved easier with a script?
View 2 RepliesDoes anybody use openshot in Slackware 13? What I made: I modified the slackbuild script for openshot of Slackbuilds.org for version 1.1.1 and then I made the package and installed it. Of course the dependencies too. But when I start Openshot, I get the following error:
OpenShot (version 1.1.1)
Error: OpenShot has not been installed in the Python path.
(Both the site-packages and /usr/share/openshot folders were checked)
Use the following command to install OpenShot:
$ sudo python setup.py install
Did a fresh install of 13.1 using lvm for the first time. I created swap in the logical volume but forgot to add it when I ran through the install. Do I need to just add an entry to my fstab and then swapon -va?
View 4 Replies View RelatedI have Eclipse Java IDE installed in Ubuntu, and now I want to add Python support
View 2 Replies View RelatedI need to add python2.6 to RHEL55/SL55 that is based on python2.4.3 to utilize the full functionality of another program. Since I already killed one system by replacing the default python version (previous tread), I asked developers how to safely enable already installed 2.6 without crashing the system. Here is the
You could install 'python26' from EPEL[1], presumably this does not break /usr/bin/python since it installs the new version as /usr/bin/python2.6.
I updated my netbook to the last incarnation of slackware-current yesterday.
My problem is now, that it is no more able to start the ash shell of the initial ramdisk i am using. The ramdisk was created with the latest version of the mkinitrd script.
The error message is:
Code:
And the error happens when the ash from the initial ramdisk is intended to be started. Simply copying the /lib/libc.so.6 stuff (symlink to the real so and the real so) enables to ash to be started but later cryptsetup fails to load.
The initial ramdisk from mid-January i used before did not have such a problem. What i also see is, that the failing ramdisk has a size of only 16k blocks. The one from mid-January was bigger.
in ubuntu 10.10, I have installed python 2.7. I would like to use apt-get to install packages to this version of python but I haven't been able to figure out howThings I have tried without success:changing the symlink at /usr/bin/python to point to /usr/bin/python2.7 - even after doing this apt-get still installs stuff to python2.6.Set up python2.7 as the primary alternative using update-alternatives - doesn't work
View 3 Replies View RelatedI have successfully installed Slackware 13.1 with the help of a brilliant guide and some reading on my own. And I am loving it. I have installed few applications and feel that the I understand the system more better than any other linuses I tried.
But, the initial fonts look quite out of focussed(can't find a word) or simply ugly?
I searched and found few threads and a dugan's blog but I got confused as to what to do exactly....How to make fonts beautiful or focussed?... This is my first query.....
Also, a second query is about updating the system...I installed Slackware 13.1 DVD without KDE( Yes I love xfce). As I see I used the "slackpkg" utility to update.
First, uncommented the # sign from one of the mirrors in /etc/slackpkg/mirrors and ran slackpkg update
And the next time when I ran the same, it said "No changes in change log between last update and now". I gather it means my system is upto date but I have doubt about it. How do I conform if the system is upto date? Should I necessarily subscribe to the mailing list? It a thing I haven't done yet.
What happens is on first boot, my Synaptics touchpad is not being recognised by the Kernel, so I have to boot a second time when it will start working.I have followed and tried loads of advice from different threads, including the copying and editing of the 11-x11-synaptics.fdi file under etc/hal/policy. Also the psmouse proto=any trick. The rmmod and further modprobe of psmouse. Restarting both HALD and UDEV both later and earlier in the boot procedure . The results of all of which is the same. The touchpad only works on second and subsequent warm boots.Below is the output of cat /proc/bus/input/devices for cold and warm bootCold boot
Code:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
[code]...
I'm now up and running on slackware 13 x64. I have noticed that the version of Python installed was 2.6.2 but there were a lot of bug fixes between this and 2.6.5. What is the best way to get 2.6.5 running on my machine. Do I have to install from source or is anybody aware of any packages that have been released?
Again, I'm not too familiar with package management systems on Slackware as I have always installed from source but this became a bit of a bind recently as updating software to newer versions involved a lot of hard work. Can anybody give me an ideas on the packaging systems available, the best ones to use, and where I can find information about the packages related to the package managers?
I used mkinitrd to build an initrd from the slackware 2.6.37.6 sources. Lilo throws the following: "Warning: The initial RAM disk is too big to fit between the kernel a the 15M-16M memory hole. It will be loaded in the highest memory as though the configuration file specified "large-memory" and it will be assumed that the BIOS supports memory moves above 16M."
Also, I am running swap, / and home on an encrypted volume group. When the initrd boots (but prior to mounting the encrypted vg) I get a message saying that no modules are found-sounds like a daft question but is this expected? I expect that this is because initrd is looking for modules, but can't find them because the relevant partition isn't mounted.
I boot my slackware through usb and I don't install lilo. I want to add slackware to fedora grub.conf.I have tried some methods,but failed. How can I do? fedora grub.conf
Quote:
title Fedora (2.6.35.10-72.fc14.x86_64)
root (hd0,5)
kernel /vmlinuz-2.6.35.10-72.fc14.x86_64 ro root=UUID=5cc13bf9-725f-
[cod3e]....
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies View RelatedI'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
View 2 Replies View RelatedI've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
View 1 Replies View RelatedI just got an hp dv4-2145dx and I am attempting to install ubuntu 9.04. I understand that the maximum number of primary partitions is four. The four on this hard disc are the windows one, a tiny one called hp tools, another tiny one called SYSTEM and then the recovery drive. Does this mean that I will be unable to install linux without deleting one of these partitions? Are they all necessary? deleting any since I don't know what they do.
View 4 Replies View RelatedIs this package supposed to compile on slakware64 13.1 ( I have also multilib) ?
I m trying to but I m encountering this problem:
Code:
This may sound a bit of an awkward question, but I have this app, Salome-Platform, [URL], It requires Python 2.5 at most to be able to run. (Compiling it is way to complex.) Since the Python of Slackware is 2.6, can it be downgraded to 2.5...? If it can, how do I do it...?
View 15 Replies View RelatedI have a user running a retail copy of RH 5 Ent. and isn't sure what package he needs. He is a developer and when installing other instances of RH he just checked off basically all of the packages under development during the initial installer. Now, he's trying to add packages but they require dependencies and he is not able to auto-satisfy those dependencies.
Is there a way that I can get back to that menu during the initial installation and let him check off all the boxes that he wants, or can I have RH auto-install all packages from DVD or install all required packages from DVD?
I'm trying to work with Xen for the first time,if I mess up some of the lingo here or if I don't quite make sense. I've been running openSUSE 11.2 since it first was released, and after an initial problem with my video driver, its been working great. I tried to install Xen today, and after the install appeared to complete successfully, it asked me to reboot and boot into the Xen kernel. When I did this, although the system booted up to the command line, it didn't launch KDE. When I try to start KDE manually it tells me that it "Can't connect to X server".
This seems to be roughly the same problem I had when I first installed openSUSE but I can't for the life of me remember how in god's name I fixed it.
We are brand new to the Linux platform and just learning. So this is what we have done so far, Installed RHEL 5 on a test machine. Says it was succesfully installed. But when it boots it boots to a blank screen with no prompt or gui or anything just a black screen. Does not accept any input or anything.
We are able to get into the GNU Grub and this is what we see
I can enter b for boot
We would like for this to boot to a GUI interface.
We want to set this up as a simple file server.
I have tried rebuilding pygtk after installing Numpy and ended up making a mess of python. I have it back to functional now, but I would like to know how to properly add numeric python support. I suspect there is a proper order to building all of the python dependencies that yields success. Ultimately I am trying to run mypaint.
View 3 Replies View RelatedI wish to install Python Numeric in site-packages... which package brings this...?I have searched in the Slackbuilds... and no Luck so far...
View 10 Replies View RelatedSo I have patched the 3.2 sources similar to the 3.1.3 sources. I used the slackbuild from 3.1.3 as well. I get to the install of the script and I get this:
Code:
...
running install_egg_info
Writing //tmp/SBo/package-python3/usr/lib64/python3.2/lib-dynload/Python-3.2-py3.2.egg-info
Creating directory /usr/man
Creating directory /usr/man/man1
/bin/ginstall -c -m 644 ./Misc/python.man
/tmp/SBo/package-python3/usr/man/man1/python3.2.1
cp: cannot stat `Demo': No such file or directory
I can't build Blender anymore without this update.
I'm running Ubuntu 10.04 64 bit as a VirtualBox (3.1.6) guest. Every time I try to run apt-get update, I get the following:
[Code]...
I am trying to install a module in openerp 6 It requires Pyuno that ships with libre/open -office If i go import uno -- no module called uno but when I go to the /usr/lib64/libreoffice/base3.4/programs and python import uno it works
I cant copy the file to python as the versions differ
I am having an issue with installing OpenSuse 11.2 using an Nvidia 9500GT. I have an AMD X2 64 4200+ processor, 4 gigs of RAM and 250 Gig HD.I was previously using an ATI X1300 but with the issues with 3D and the driver I decided to update my video card. To be clear, OpenSuse installed fine with the ATI X1300 card.
I purchased the 9500GT and installed the card. I then started the 11.2 32bit/i586 install and all goes fine until the install completes. Once you get the warning that the computer is about to restart (after the install completes) the system goes back to the Suse loading screen and then changes to the CLI where I can see what is loading. The last thing I see is that the HAL daemon is starting and then the screen goes black and the system completely locks up.
I have tried this several times using both the 32bit and 64bit KDE versions with the same result. I have tried Mandriva 2010 to see what results I get and it works fine.
I'm attempting to install Kubuntu on a new laptop but seem to be having some strange issues. It's a Dell Latitude E5410 with 160GB HDD, 2GB RAM and Intel Core i5-520M(2.4GHz). I'm trying to install Kubuntu 10.10. When I restart the machine and boot from the CD for an initial install it seems to hang for a VERY long time. It will eventually get to the boot options (after hours) but seems sluggish. Once the install gets going everything seems decent except for that I can't seem to get it to finish. I know the CD is good since I used it to get Kubuntu on 2 desktops and another laptop in the last 48 hours. I've also burned another CD just to make sure. The checksum was spot on. Does anyone know what I can do to get this remedied?
View 1 Replies View RelatedI am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
This is my first server installation. I am intending to make this a basic web server for educational purposes. I have installed this server in VirtualBox, everything seemed to go fine besides the fact that I accidentally hit the enter button when I was at the opportunity to install the additional software during the initial setup. I figured that it was no big deal as I could just use aptitude to get what I needed later. My first step was to get LAMP setup. Heres where it started to seem to go wrong: I installed Apache2, however, it seems that I am unable to test it (no browser).
Code:
oliver@DrDoak:~$http://localhost/
-bash: http://localhost/: No such file or directory
oliver@DrDoak:~$
I then proceeded to install php5 again I have ran into trouble when trying to open through GEDIT.
Code:
oliver@DrDoak:~$ sudo gedit /var/www/testphp.php
sudo: gedit: command not found
oliver@DrDoak:~$