I just updated my server, (Ubuntu 8.04) and had to restart. Now I can no longer SSH into my Linux box or access my website from the internet. Apache is running and everything worked fine before the restart.
View 1 RepliesI am running Server 10. I have a requirement to perform an action before the MySQL service starts, and perform another action after MySQL service stops.
I found the init script for MySQL under /etc/init/mysql.conf. I added my thing to the pre-start script there and works fine.
I am having trouble finding the script that stops the server so I can modify.
Running 10.04, just installed a ton of updates from Update manager.Printer is HP Officejet 6210Everything working fine up until after installing updatesWhen I try to print I get error message. Starting to troubleshoot tells me that CUPS service is not running, when I try to locate using http://localhost:631/ I cannot connect.Checking Synaptic it seems everything is installed that should be
View 1 Replies View RelatedWhen I ran updates and installed 9.10, this message appeared, "Network service discovery disabled. Your current network has a .local domain, which is not recommended and incompatible with the Avahi network service discovery. The service has been disabled." The computer will not respond to anything, completely frozen--I am not able to open any programs and the CPU itself seems to be running loudly.
View 1 Replies View RelatedI'm interested in setting up and providing my own DNS services for public use. I have two separate server machines and can easily put an extra NIC card or two in any machine, if required. What would it take to create such a service like ZoneEdit or EveryDNS?
I know I'd probably need to register 2+ static IP addresses thru Comcast and open a whole host of ports on my router. How would I set this up in terms of software? Is BIND the right tool for the job with a control panel in Usermin/Webmin?
I am trying to set up a web server, i have put in a hostname.In terminal command: hostname shows 'promisedland, but hostname -F gives me name or service not known.How do I associate hostname properly, I have registered a hostname through DynDNS.I can access the page in my browser so I know it is there, I see the blank "u made it page".I just want to host a web server w/ a directory to my shared files (movies, music etc) that are on my server.
View 2 Replies View RelatedCan anyone suggest a good vps service please!
View 4 Replies View RelatedStill a Linux noob here. I downloaded openssh and did a ./configure and a make install. How can I run openssh as a service? When I try /etc/init.d/ssh restart it doesn't work. It's installed in /etc/openssh.
View 9 Replies View RelatedI have telnet service intalled(apt-get install telnetd), but when I type telnet, I'm getting the following error:
bash: /usr/bin/telnet: No such file or directory
Is there any Print Management service for centralized Print Manager and Print Monitor?
My requirement is a Print Management Server which monitor all the printers in my office and keep tracks of all the the printing operations (IP of the user, Digital copy of the printed documents, date, time...)
I installed CUPS but it's not the solution which I'm looking for.
i just installed frox ftp proxy for my server using apt-get install frox.after i installed it i did 'sudo /ietc/init.d/frox start" and got t this "starting frox:caching ftp proxy server: disabled"
View 2 Replies View RelatedLast winter we had the intention of using VMWare branded Novell Suse Enterprise as we were going to be getting the licenses/subscription through the purchase of Vsphere. Since that time we have set up 4 VMs, and have been testing an application that will soon be going into production status. However a new issue has arisen. As we are over budget we will not get the Vsphere license (which included Suse subscription). We also found that the added features of a Vsphere license do not really add anything over the free ESX hypervisor.
On the one hand these servers have all been configured precisely, on the other hand we have no update service from which I understand we would need a Novell subscription. Most of the repositories we have added are external to Novell, meaning they are community ones. So my questions are this:
1.) Can we use Opensuse community repositories for the Online Update?
2.) If not is there a way to easily 'convert' Enterprise Suse to Opensuse?
Obviously what we first want to avoid is having to do a brand new install of Opensuse and spend the time moving data from the old to the new. One of the issues that has caused the delay and over runs is that the application we will be deploying has not lived up to its promises, and has caused considerable amount of time configuring, tweaking, and de-bugging.
have a web application that runs fine.Whenever I run jetty manually the application runs ok. This is what I do:sudo java -jar start.jarThe application is located within the webapps directory correctly and the required jar files are within /usr/share/jetty/lib.But when I run jetty as a service:sudo service jetty startThe server starts, but the application does not respond. There is no error in the output. This is very strange, isn't it
View 1 Replies View RelatedI've got a small web hosting service, for some of my friends. Where I want my friends to be able to have dedicated virtual servers just for a simple LAMP and ftp-server.
I've got quite limited hardware.
AMD Athlon II (Dual core)
4 GB 1333 MHz DDR3 RAM
100 Mbit Fiber-lan ( Dynamic IP )
What I would want to know is how to create the virtual servers in an truly optimal way. Should I use KVM or VirtualBox? How can I make the request to mydomain.org go to one of the virtual servers and the request to anotherdomain.com go to another virtual server?
If the virtual server is the best solution.
* How much memory should be sufficient for a simple LAMP/FTP-server?
* What would be the most optimal settings for my limited hardware capacity?
all the tutorials i found for ushare and mediatomb shows it installed on desktop and not server. it also requires an account to be logged in. once logged it, you have to run a command to start it up. some questions.
1) is there a way to run either one w/o having to log into an account? so if say i restarted the server, it'll run the programs w/o me having to log in.
2) i would like to specify a directory to share music and movies. is one better than the other? clients that i plan to use are songbird, itunes (maybe), and vlc - maybe xbox 360 and ps3. other client suggestions?
3) other dlna server suggestions? this will be running on ubuntu 10 or 11 desktop or server. but the main thing i'm looking for is what i mentioned in #1.
Im used to Win Server so Im not very familiar with ubuntu server, I want to setup a load balanced service I have three server , one as a load balancer and the other two as my web servers, now my questions is that what are the steps I need to do to setup my cluster, I dont mean the requirements, not the actual detailed configuration.
Im gonna have my Mail server on these servers, how am I gonna setup the mail server to work with the load balancer, I mean is it possible to load balance the mail server like web server on ubuntu?
i have two ubuntu server the first run on ubuntu 9.10 = ok the second run on 10.10 maverick a have the problem that dovecot service stop automatically
View 1 Replies View RelatedI have a few problems getting a custom service/daemon to auto-start at boot. I'm running ubuntu 11.04 Server amd64 edition. One of the services is a Teamspeak3 server I'm trying to start. I would like it to start up automatically on boot. ts3 already have a script with start/stop commands so all i have done is make a little script for it to get it to run as the correct user.
Code:
#!/bin/sh
### BEGIN INIT INFO
# Provides: ts3
# Required-Start: $all
# Required-Stop: $local_fs $remote_fs $network $syslog $named
# Default-Start: 2 3 4 5
[Code]...
I have a fresh new F13 installation and I am not linux expert, I need to test Fedora for some reasons. When I try to start HTTPD or vncserver services, status display as "This service is being refreshed right now", it keeps like this for a long moment. Closing and reopening services applet, I notice that both services are stopped. I googled about apache, the 1st thing I understood is to search error_log, opened it in gedit, nothing is written in this file.
View 4 Replies View RelatedDoes anyone know how to make an anonymous email service like Dodgeit,com? Basically where users can go thru a web login to check any mailbox name they want at yourdomain.com.
I know you can do it thru Postfix, what other setup is needed? Any easy way of going about this?
I just installed apache2 and i can't restart the service, i get: Code: sudo: /etc/init.d/apache2: command not found
View 6 Replies View RelatedShort story: I have a problem with one of my services (mediatomb) - it requires an md RAID array to be mounted in order to start, because it uses files from it. $remote_fs is added by default to the "Required-Start" line of the init script, so I thought that this should be enough. However, the mediatomb service fails to start on boot, but starts just fine when I execute "service mediatomb start" later. The array is entered in /etc/fstab and is automatically mounted on boot.
Long story...
This is my file server (Ubuntu Server 10.10), which has a raid array created with mdadm (mounted on /z), and the root filesystem is located on an USB thumb drive. I've installed mediatomb, but I wanted to put its database files on the raid array instead of the root fs, so I've symlinked /var/lib/mediatomb (the default path) to /z/mediatomb on the array. This is because the mediatomb DB is supposed to be updated fairly often, so I didn't want it to stay on the flash drive.
Problem is, the mediatomb service can't start on boot - in /var/log/mediatomb.log, it says "2011-03-07 19:22:47 ERROR: /var/lib/mediatomb : 20 x No such file or directory". As I said, it works fine when manually started later...
This is the fstab entry for the raid array code...
Just wondering, what happens when you have multiple server softwares listening to the same port? will it be able to distinguish which service to use by the protocol information, or is it setting it up for failure?
IE: http and ssh both listening to port 80.
I found and modified the following file. It starts JBoss just fine. However, chkconfig refuses to --add it - saying the file doesn't support it.
its in /etc/init.d, root:root, rwx,rx,r and the first few lines...
#!/bin/sh
# chkconfig: 345 100 25
# description: JBoss App Server
# processname: jboss
[Code]....
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
i just installed Fedora 12, clean without anything change in it. I opened services dialog, and the openvpn service have status:dead, however it shows that it is enabled.when i try to run it as:/sbin/service openvpn start.It write OK. However if check it:/sbin/service openvpn status it write that service not running. What is a point of a problem? I have opened openvpn in FireWall,however without success, may be some additionsl services for openvpn are not running?
View 1 Replies View RelatedI am running named as a caching name server (package bind-9.7.3-1.fc14.x86_64 with config files exactly as supplied), and sometimes it does not shut down cleanly when I shut down the machine.The script /etc/ init.d/named tries to issue a "stop" command with rndc and that seems to fail most of the time; then it next uses the function killproc (defined in /etc/init.d/functions) which fails sometimes.I've hacked the named service script for now so that error messages are not hidden, but there is nothing reported.
View 2 Replies View RelatedI go and restart ssh and I get this weird message. thought I should be getting ok or fail message, at least thats how I remember it. What do you think?nate@universal-mechanism:~$ sudo service ssh restart
View 3 Replies View RelatedI am a newbie to linux and running ubuntu server 10.10 (no gui), I had it configured with a fixed ip address and all was fine till I changed internet poroviders and got issued with a new router.
I am trying to configure the server to reflect the new settings of the new service provider. here are the contents of /etc/network/interfaces
Code:
auto eth0
iface eth0 inet static
address 192.168.15.52
netmask 255.255.255.128
gateway 192.168.15.1
Just so I got this right can someone tell me if I am right here. address is the IP I wish to give to my server statically. and gateway is the ip of the router. When I try to ping the router I get
Code:
Ping 192.168.15.1 (192.168.15.1) 56(84) bytes of data.
From 192.168.15.1 icmp_seq=1 Destrination Host unreachable
When I try to ping the internet i get :
[Code]...
Is there anyone that can shed some light on where my problem may be. As i said before I got the new router I had been working with the server no problem.
I have an Ubuntu Server, a dyndns account and an account with [URL]. My DynDns stuff is all working just great - novo.dyndns.tv is the address. Now I need a domain which I have already bought, to be linked to that machine at [URL] I signed up with freedns.afraid.org and now I am a bit confused at what records to add where. I added a domain - [URL] then setup a webforward as follows: redirect from [URL] and redirect from[URL] to [URL] , however if you go and visit:[URL] you will see my problem! It takes you back to [URL] server and says there is not a webforward setup for [URL]This tells us that the nameservers are all setup fine - and its something in my freedns config which is failing.
View 4 Replies View Related