The audio plays both on speakers and headphones, try all varients of snd-hda-intel model=[ref, auto, dell, dell-bios, etc] but doesn't fix this problem.
cat /proc/asound/card0/codec#* | grep Codec
Codec: Conexant ID 5067
Laptop: Vostro 1014
OS: Jaunty
Kernel: 2.6.28-18-generic
ALSA : 1.0.18-ubuntu11
I'm using an Acer Aspire 5536g and Ubuntu 10.10 x64. I can't get any sound from my mic with PulseAudio installed and the headphone jack sense function doesn't work either - when I plug my headphones I get sound from both them and my built-in speakers. I don't have any problems with PulseAudio removed.
View 9 Replies View Relatedboth audio inputs (I use the integrated mic on my notebook) and jack-sense (integrated speakers/headphones) work properly, as they should. But after some time (from few minutes up to several hours) both of them cease to work simultaneously. After that the mic input levels turning gray and speakers don't work at all (when headphones were connected at that moment) or speakers don't mute when I connect my headphones (if headphones were not connected then). After I reboot, everything is okay again for some time, but then it happens again. Setting mixer levels manually with alsamixer doesn't help at all. I also tried different snd-hda-intel model settings in alsa.conf, but that just made things messed up, so I stayed with auto setting. This way everything (inputs/outputs/sense) works as should until it simply stops working.
It's maverick, ALC268, ATI Azalia (Intel HDA), alsa 1.0.23, but I had this problem with karmic and lucid as well when I tried them. Now I want to switch from Win7, but this is the only thing keeping me from it.
Can't get jack to work. Installed from synaptic (running ubuntu 10.10, 64bit).
WHen ckicking "start" in qjackctl (jack control) I keep getting this message:
19:27:58.615 Patchbay deactivated.
19:27:58.616 Statistics reset.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
[Code].....
I have everything installed and Jack working fine. I'm in the user group and have realtime enabled and running. My problem is that I can't get my input (the guitar) through rakarrack and out. This is how it is set up:
Guitar is plugged in directly through the Input jack on the sound card (I have tried with the front input, rear, front mic, and rear mic inputs)
I have kde mixer set to allow pass-through of the sound from the input source (I can hear the guitar in my speakers, un-amplified directly from the source). The problem is that I cant get this source into rakarrack with jack to save my life. I have tried all sorts of combinations both physically with the audio jacks and in jack audio. Is that Jack isn't detecting the right input source with alsa or something?
I'm new to linux. I cant get jack to work. I am using ubuntu 10.10 on a gateway laptop. This is what it says in jack's window
p, li { white-space: pre-wrap;
Code:
00:48:28.140 Patchbay deactivated.
00:48:28.188 Statistics reset.
00:48:28.197 ALSA connection graph change.
00:48:28.450 ALSA connection change.
00:48:36.141 Startup script...
00:48:36.142 artsshell -q terminate
sh: artsshell: not found
00:48:36.546 Startup script terminated with exit status=32512.
00:48:36.546 JACK is starting...
00:48:36.547 /usr/bin/jackd -r -t2000 -dalsa -dhw:0 -r44100 -p1024 -n2
00:48:36.551 Could not start JACK. Sorry.
00:48:40.026 JACK was stopped with exit status=255.
00:48:40.029 Post-shutdown script...
00:48:40.030 killall jackd
jackd: no process found
00:48:40.442 Post-shutdown script terminated with exit status=256.
my sound system seems to work fine but the headphone doesn't work when i plug it in its jack male to laptop's female. Its not a usb system.
I have tried to use the instructions given by others in various threads but its still not working
My sound card is:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
I have a Dell Studio 1535 and can't seem to get recording from the mic jack to work. I was wondering if anyone has got it to work or not on Ubuntu 8.10 64 bit. I fiddled with the settings in System->Preferences->Sound and in Volume Control: HDA Intel (Alsa mixer), as well as the settings in the semi-CLI program alsamixer, but it doesn't matter what I do. I have failed to get it to record from the mic jack. It will only record from my internal mics, and I don't want that at all.
View 2 Replies View RelatedThe problem I'm having is that when I plug in my headphones into my asus g60vx laptop I do not have sound, however if I unplug them I have sound through my laptop speakers. [URL]. Ubuntu 10.10
View 1 Replies View Relatednow half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies View RelatedI have tried every forum that exists, but I have been sadly frustrated in setting up this netbook's headphone jack and internal microphone to work. Basically the speakers work fine, but as soon as I plug in headphones nothing happens, then I unplug the headphones and the speakers work fine. I tried adding the following two lines to the /etc/modprob.d/alsa-base.conf options snd-hda-intel position_fix=1 model=3stack options snd-hda-intel model=dell-vostro enable=1 index=0 one of the other forums told me to do this, but no luck.Also I tried this too: [URL]...
View 3 Replies View RelatedI'm trying to find out why the wireless access point at work most of the time won't let me connect to the network. I'm using Ubuntu 10.04 on a DELL vostro 1720. The router model is D-LINK DIR-655. lspci gives me: Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01), and I'm using Broardcom STA drivers.
If I try like 10-20 times to connect I will often finally get connected and once connected everything works fine for the rest of the day. The only router I'm having this problem with is this one. In the log below, the last lines is a connectionattempt that succeeded and all the lines above those are several attempts that failed. It seemes like there is some kind of timeout issue but I'm not sure what and how to fix it.
The syslog for the connection attempts are (I have marked out MAC adesses and public ips with *):
[Code]....
I am trying to use JACK for some audio applications, but I have had no success until now I'am using Ubuntu 10.04 on my Dell Inspiron 6400. Kernel 2.6.32-33.
The following is the QjackCtl log:
p, li { white-space: pre-wrap; } 14:38:48.196 Steckfeld deaktiviert.
14:38:48.377 Statistik zurckgesetzt.
[code]....
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
I just installed 9.10 on a brand new Dell Vostro 1520. The WLAN card does NOT work out of the box.
Here is what you have to do.
After install and rebooting insert the live CD
Go to software sources (system > software sources)and check the "officially supported restricted copyright" box
You are then asked to update the available software list, do so.
You will receive an error message since you are not (yet) connected to the internet and all the other repositories are not available.
Now you should be notified that restricted drivers are available, if not you can go to system > hardware. Anyway, now you should be able to activate the Broadcom STA driver. After rebooting you can connect to available wireless networks.
Alternative (in case you are not asked, which happened to me on another Vostro system) system>administration>syaptic package manager
Search for broadcom
Mark b43-fwcutter and bcmwl-kernel-sources for installation
Reboot (who said there is no rebooting required in linux)
The adapter should be up and running ...
I am a newbie. I have a Dell Vostro 2510 running XP. I have virtualbox and installed ubuntu 10.10 aS guest.
The one issue I seem to have is i cannot get my webcam to work. I searched everywheres for some tips on what do to, but nothing seems to work.
I installed both Cheese and Skype. The camera is not even detected.
setting up CentOS 5.3 (x86_64) on a Dell Vostro 420 Workstation, I came across a few problems/questions:
1. I am using software RAID1 (including sda and sdb), following the tutorial on CentOS Wiki. However, in my case, GRUB wants to install on /dev/md0 (the RAID device mounted as /boot) instead of /dev/sda (which would be the MBR, as usual). This is confusing, since installing to a partition is completely different from installing to the MBR. I suspect it *does* write to the MBR since the system does boot afterwards and the MBR was empty before. So maybe /dev/md0 is just a bit imprecise If yes, is the MBR still written to sda only, so that it is necessary to setup grub on sdb separately, as indicated in the documentation?
2. Sound does not work. The sound controller (ICH10 family) seems to be recognized, but the sound test behaves strangely: Normally, you have the three test sounds, and only after that a window will appear asking for confirmation. On my machine, the confirmation window appears immediately (!) so it seems the system is not even trying to play the sounds. Very strange...
3. I am seeing this damned "BIOS Bug: MCFG area at f0000000 is not E820-reserved" message. (May or may not be related to issue #2) It seems many people have this problem, but there is no real solution. In few cases, a BIOS update did the trick, but I think most hardware manufacturers are not even considering this a bug as long as there are no problems in Windows. It does seem to depend on the distribution, however, so newer kernels obviously have learned to handle the situation. Is this being considered by the upstream provider? Switching to Fedora is not really an option here
I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.
Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.
I upgraded fro Jaunty to Karmic and then to Lucid and my TV card has stopped working. I had been informed that this was a result of the splitting of the linux-firmware into two separate packages, but having installed the linux-firmware-nonfree package the problem persists. The card is a Hauppauge WinTV PCI and although it is properly recognised by commands like lsmod, lspci and in the sound card settings, I can't tune in a single channel. It worked out of the box in Jaunty. Is there anything else that needs to be done to get the nonfree firmware working properly?
View 3 Replies View RelatedCannot find input plugin for MRL [dvd:/] Is now the message that I get when attempting to play DVDs in Kaffeine, which worked very well in SuSe 10,3 three hours ago. Ironically, VLC now works a treat, when upgrading that in 10.3 killed it.Xine doesn't want to work (restricted format), and Kaffeine isn't playing any files either. Has something been dropped from my previous setup, or do I have an inadequate installation? I'm not very command line oriented I'm afraid;I just expect things to work as they did before...:-)
View 4 Replies View RelatedI've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies View Relatedcan't get to work this, anyone knows how to make it happen? im using opensuse 11.3 64-bit on a dell vostro 320.
View 9 Replies View Relatedi installed an nvidia graphics card recently and this
Code:
ffmpeg -f alsa -ac 2 -i pulse -f x11grab -r 30 -s 1024x768 -i :0.0 -acodec pcm_s16le -vcodec libx264 -vpre lossless_ultrafast -threads 0 ./Desktop/mydesktop.mkv
[code]....
I was just introduced to Linux official a few days ago : The problem I am having I am trying to Set up Magic Jack on Ubuntu 9.10, and I have no clue how to get it to work.
View 7 Replies View Relatedwhenever I try and start it, it spits this at me: p, li { white-space: pre-wrap; } Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.its all greek to me I fiddled with some basic settings, but to no avail, I'm running a dell dimension 9150 with a stock soundcard. To be honest, I don't know what Jack is, but it opens when I open DJplay, so I'm guessing its like Asio4all when running deckadance?
View 1 Replies View Relatedhappened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies View RelatedI am having trouble getting the audio to work on this computer (ACER 5570-4765 with PCM Audigy ZS 2) running Ubuntu Studio 10.10. I can get JACK to run without errors but I am not sure if settings are correct. For now I would just like to listen to music using Audacious but I would eventually like to record guitar using Rakarrack (I have this installed but I am having zero luck with this as well).
Here are a few lines from the JACK message screen.
19:13:18.734 JACK is starting...
19:13:18.735 /usr/bin/jackd -P1 -dalsa -r44100 -p1024 -n2 -D -Chw:0 -Phw:0 -S -i1 -o1 -Xraw
19:13:18.748 JACK was started with PID=2671.
no message buffer overruns
no message buffer overruns
jackdmp 1.9.6 .....
Scans a bunch of ports then :
ALSA lib rawmidi_hw.c:233snd_rawmidi_hw_open) open /dev/snd/midiC0D0 failed: Device or resource busy
scan: can't open port hw:0,0,0 in-hw-0-0-0-Audigy-MPU-401--UART-, error code -16, zombified
ALSA lib rawmidi_hw.c:233snd_rawmidi_hw_open) open /dev/snd/midiC0D0 failed: Device or resource busy
scan: can't open port hw:0,0,0 out-hw-0-0-0-Audigy-MPU-401--UART-, error code -16, zombified
I have HP Pavilion laptop with two jack outs for audio and both of them work if only one is plugged in. If both of jacks are used, then in only one headphones set there is a sound. I would like to have sound on both of them, so for example two people can listen the same thing on their own headphones.
I'm working on Ubuntu 10.04 and my sound card is:
Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
For starters; although I am comfortable with Ubuntu, I don't really understand these midi and jack things,Ok,so I got a midi controller keyboard which I want to connect to my ubuntu pc to start making some music (play piano and possibly try to make some songs). I don't know if my sound card supports midi, but I got a Roland midi-to-usb converter. I connected it to my pc and downloaded Jack Control. When I fire up Jack control my normal music (using audacious) stops (don't know if this is normal). On the window that appears I hit start which results in an error, which I will paste below:
Code:
22:46:06.556 Patchbay deactivated.
22:46:06.560 Statistics reset.
[code]....
I have an ESI Gigaport HD USB external soundcard which I'd like to use via Jack with my Thinkpad T40 running Ubuntu 9.04.This is the card, it has no inputs and 8 x outputs:
[URL]
The card is autodetected on plug in. I can see the 8 x outputs in the Jack connection window but I can't run any sound to it. Anything I connect to it on any of the 8 channels is silent.