Networking :: Pages Not Loading Randomly On Dialup
Jan 31, 2011
I am currently using Open SuSE 11.3 and connect to the internet through a fixed wireless terminal (CDMA Wireless modem), Huawei ETS-1201 with BSNL connection. The problem is that, after dialling and connecting to the internet, some pages dont load randomly. Sometimes, Google loads quite fine, but other times, it is just stuck and I have to reload the page several times. When I connect through Windows, I have no such problem. I have used Fedora, Ubuntu and Sabayon but the same problem exists. I don't want to return to Windows but is frustrated with my web experience on linux.
View 2 Replies
ADVERTISEMENT
Mar 10, 2010
I had started another thread about this but had a terrible subject line. Others may have this issue.Found the answer deep in the bowels of documentation. My question now is " did version 20 mess this up for everyone with dialup"?
View 4 Replies
View Related
Feb 13, 2010
I just installed Ubuntu 9.10 in a dual boot Vista system (DELL INSPIRON 530). Everything was ok except the wireless network configuration. Afrer checking on the Internet I realized There was an issue with my network card (Broadcom BCM431. I first tried to install the drivers using Ndiswrapper with not succes. Finally, I was able to use the b43 driver by installing b43-fwcutter. Now the driver is shown and active in the Hardware Drivers Utilily. I am even connected to my Wireless Network. However, I cant load any website. I have checked the parameters in the network set up. I have even tried different options, like static or dinamic IP. But I cant load any website.
View 2 Replies
View Related
Sep 16, 2010
I am Using Ubuntu 10.04 fresh install connected to internet via VPN Network.Internet works fine i can dowload mail and send. But for some reason i cant load some webpages like Facebook, Adobe and etc.I install all the newest programs Java, Flash anything.I'm runnung Firefox 3.6.9.I tried everything disabled IPV6, Proxy. But nothing solved it
View 5 Replies
View Related
Apr 18, 2010
after wrestling with several problems over the past few days of switching over to a portable version of Linux 9.10 (I'm running a Live USB created using Lili USB), and deciding between the UNR or the Desktop i386 releases (I eventually went with UNR because i386 will not load on my netbook and ends up corrupting itself), I now find myself with the interesting problem that Firefox will no longer load webpages.I'm using a wireless connection, and it worked about 4 hours ago, but doesn't any longer. It registers that it is connected (The network icon displays the connected information), but the webpages themselves will not load (And I don't know if any other web based application functions- I only bothered to check firefox).
And I know the connection itself is not to blame because I'm using it right now to post this message (Off of Windows 7).Any help that can be given would be appreciated. Except for these problems that come up I'm loving Ubuntu, and intend to use it inbetween classes and such.EDIT:No internet applications work, and the router does assign me an IP address while in Ubuntu. Also, the speed of the "Server not found" message indicates that it's not even trying to connect.
View 3 Replies
View Related
Jul 21, 2010
Apparently when cachecdn.websitename.com tries to load it either freezes,crashes or missing components like the chat bar in a chat room is missing from the web page.How to fix?
View 2 Replies
View Related
Nov 29, 2010
The same network environment, no matter which browser I use, my fedora 13 always works slower than windows XP on loading web pages. Others are better than windows -- like memory management...(I directly feel that). applications running more smoothly than those in windows xp.
I want to know how could I make it faster on loading web pages.
Note: my network environment can not be changed!
View 7 Replies
View Related
Jun 18, 2010
Some pages on the Internet will not load. What is the remedy?
View 1 Replies
View Related
Jul 9, 2011
I am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
View 1 Replies
View Related
Oct 1, 2010
Two very simmilar laptops connected to the same WiFi router loading the same web pages. Firefox on Windows does that for 3 secons, while Firefox on Ubuntu needs 1-3 minutes to load the same page. What could be the reason for this? Any idea how to fix it? The laptop with Ubuntu runs 10.04 LTS (lucid), Firefox is 3.6.10 and on any other WiFi network it loads the web pages really faster but why is much slower than Windows now?When testing the speed on URL...Ubuntu loads times faster than Windows. The WiFi router has been reseted. Firefox has been started in -safe-mode, both didn't help.
View 4 Replies
View Related
Jan 28, 2011
browsers consistently hanging and not fully loading web pages. this happens in all the browsers i have tried. Opera and Chromium and Firefox. This only happens in Ubuntu. All the other computer in this house load fine and this windows side of this computer loads the pages the right way. At this point i don't know what to do but keep hitting stop and reload and few time till the page loads. can anyone help with this? Also I have tried to clear the cashes. One question where do the temporary Internet files go so I can manually clean that folder out. And also Firefox isn't to bad and the other browsers I just don't like it that much as I like the opera.
View 2 Replies
View Related
May 4, 2011
I'm having trouble with Firefox hanging. It takes at least two attempts to launch, having to force the initial blank page to quit. Often it will freeze my desktop when loading new pages, and I have to force quit. I've upgraded to 3.6.17 but no difference. The Mozilla help page suggests disabling add-ons to find the problem, but to no avail. Chrome works OK but I'd rather use Firefox.
View 6 Replies
View Related
Jan 24, 2010
installed my amazing ubuntu on virutalbox because i have windows. after i "rebooted" my box it took a fail and says "GRUB loading..." and never stops loading until vb eventually gets fed up and just crashes...
View 2 Replies
View Related
May 31, 2011
I recently bought my laptop (Fujitsu nh540) and installed FC14 on it. I have Integrated WLAN Atheros HB97 (IEEE 802.11b/g/n) (more info here about the config) running on: 2.6.35.13-91.fc14.i686.PAE
Since I installed FC I've had problems with the internet. In any browser pages load very slow, it looks like the browser waits some seconds, sometimes even 1-2 minutes until it actually starts to load the page.
Second thing I saw is that when it boots I keep getting:
Determining IP information for eth0... failed; no link present. Check cable? [FAILED]
But I have WiFi internet. I am not using a wired internet connection.
I installed madwifi driver (compiled it, after reading some info on google and it seems it should be good for my network) and it seems it's a bit better, but I still have to wait some seconds until it starts loading pages. I tried different browsers, it makes no difference. On my other 2 laptops I have no problems, the internet works fine, same goes for my android mobile phone. Another "nice" problem I noticed is that when compiz is enabled I see incoming video on skype black and the same black screen for some movies with some programs. After disablig compiz, all works for video.
View 1 Replies
View Related
May 2, 2010
I'm running Suse 11.1 KDE 3.5. My wireless is working absolutely slow. Pages aren't loading fast and I timeout when trying to do online updates. Here's some information:
Device: PRO/Wireless 3945 ABG [Golan] Network Connection
Kernel Driver: iwl3945
All my firmware seems to be in order.
/usr/sbin/iwlist scan
lo Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed : .....
ping -c 5 Google
Google ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4027ms
View 2 Replies
View Related
Dec 28, 2010
I have been investigating some security precautions over the past several months. I use Ubuntu now instead of windows and FIrefox browser also. I have installed BetterPrivacy, WOT, NoSCript and a few other add ons. I have SELinux, ClamAV, AIDE, and chkrootkit installed for Ubuntu.
When we browse certain web sites, we get an error about the server being reset. However, when I put the Ubuntu install cd in and browse with Firefox, obviously with no add ons or settings changed, we can browse to the site with no problems. We are trying to be secure on the internet and I don't want to lower or get rid of any of the settings / add ons we added. What would cause servers to reset when using Firefox / Ubuntu with browser add ons / OS addons?
View 2 Replies
View Related
Apr 17, 2009
I' have FC10,firefox3.0.4it take ages to load any page.the d/l speed is good .but while loading pages it takes a lot of time!while on XP everything works fine even though the the firefox version being an earlier one than FC10
View 4 Replies
View Related
Nov 26, 2009
I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
View 2 Replies
View Related
Oct 29, 2009
is there anyone here knows how to setup Dial up server in CentOS 5.3?
View 3 Replies
View Related
Jan 13, 2010
Ubuntu 9.10: where's my dialup modem on my thinkpad X60s?
I'm trying to use "GNOME PPP" to connect by dialup, and it complains that it can't find my builtin modem. But XP can, and that's what I'm using at this moment. XP says the modem is on COM3.
I tried using several "/dev/tty*" entries in the GNOME-PPP setup, but none of the ones I tried worked. The GNOME-PPP default is "/dev/modem", but none such is mounted.
Is there some way I can find out where the modem is mounted, if it is? Or else, how can I mount the modem properly and test it?
View 4 Replies
View Related
Mar 12, 2010
I have a dial-up modem in my Laptop.
Also I have a Dial-up line[Base Phone].
Can I make calls from Dialup modem [Making & Answering calls]?
View 5 Replies
View Related
Aug 3, 2009
I'm using fedora core-8. I need to setup dialup server to accept dial up connection.Dial up server shoudl also allocate ip address to client (trying to connect using modem)If some one knows how to do this, please let me know.I'm trying to achieve peer to peer communication between two computers connected using modem on both side over PSTN line.
View 2 Replies
View Related
Mar 4, 2011
I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
View 1 Replies
View Related
Feb 19, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Sep 9, 2009
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies
View Related
Jun 23, 2010
I have 2 laptops connected by a lan cable - from 1 laptop network card to the other. the first laptop is an Asus eeePc that runs a modified version of debian. this one is connected to the internet and i simply want the other one to connect to the internet via the lan cable. the "server" has 2 connections: 1. one for connecting to the internet via a dialup mobile connection (i checked and this connection is shared) 2. the 2nd connection: "Local Area Connection" defined this way:
IP address: 192.168.0.4
subnet mask: 255.255.255.0
+ it is also marked as 'shared'
that's all, no Gateway/DNS/Wins defined
[code]...
my problem is that the client (192.168.0.3) cannot open web pages even if it sees just fine the server's files.
View 3 Replies
View Related
Jul 9, 2015
My home connection is dialup via an 8-bit ISA modem. I plan to use the old box with the modem in it as a gateway and do my actual work on this laptop. Connection away from home is not so easy to get in my area.
SuSE 6.1 has no problem operating the modem, so the hardware works. SuSE 6.1 can't seem to make anything else work though. How can I configure Debian to see and operate this modem?
SuSE sees the modem on /dev/ttyS1. The same chat script does nothing on jessie. I'm guessing that jessie is just not seeing ISA.
I'm able to install packages onto the box via a usb drive but that's only on the days when the local coffee shop's wi-fi actually works, which is rare.
View 3 Replies
View Related
Jan 17, 2010
I am new to Ubuntu and Linux. I think that I like Ubuntu, but I don't think it likes me! I can't get onto the internet with my "old fashioned" dialup that is preinstalled in my Dell Latitude. In fact I can't find any reference to a dialup modem in Ubuntu 9.10. Have done some research and it appears that my winmodem will not work with linux, but there maybe some complex way around this problem. Can it be done? I have a Conexant HDA D110 MDC V.92 modem.
View 9 Replies
View Related
Jan 20, 2010
I have ubuntu 9,10 and 7 repositorie disks I bought from osdisc.I installed ubuntu next to widows xp 3.I can't seem to connect to the internet or configure my system to do so.My us robotics usb 2.0 modem works great in xp but not at all in ubuntu.Is there someone out there willing to help me step by step?Or in anyway possible.Directions on how to or where to go for help.I'd really like to not be dependent on Microsoft completely. My telephone number is 903-566-3590. My fax is 9035660030. My address is 12862 Sandy Point Drive Tyler, TX 75707
View 1 Replies
View Related
Oct 10, 2010
I have a 64 bit system on which I am trying to install Linux. I installed Ubuntu but it does not have a dialup option and since I live in a rural area I only have access to dialup at this time.
Does anyone know of a 64 bit operating system which contains dialup capability? I have tried reading about the various distros but have been unable to find any which indicate they work with dialup.
View 14 Replies
View Related
