Apparently when cachecdn.websitename.com tries to load it either freezes,crashes or missing components like the chat bar in a chat room is missing from the web page.How to fix?
View 2 Repliesafter wrestling with several problems over the past few days of switching over to a portable version of Linux 9.10 (I'm running a Live USB created using Lili USB), and deciding between the UNR or the Desktop i386 releases (I eventually went with UNR because i386 will not load on my netbook and ends up corrupting itself), I now find myself with the interesting problem that Firefox will no longer load webpages.I'm using a wireless connection, and it worked about 4 hours ago, but doesn't any longer. It registers that it is connected (The network icon displays the connected information), but the webpages themselves will not load (And I don't know if any other web based application functions- I only bothered to check firefox).
And I know the connection itself is not to blame because I'm using it right now to post this message (Off of Windows 7).Any help that can be given would be appreciated. Except for these problems that come up I'm loving Ubuntu, and intend to use it inbetween classes and such.EDIT:No internet applications work, and the router does assign me an IP address while in Ubuntu. Also, the speed of the "Server not found" message indicates that it's not even trying to connect.
The same network environment, no matter which browser I use, my fedora 13 always works slower than windows XP on loading web pages. Others are better than windows -- like memory management...(I directly feel that). applications running more smoothly than those in windows xp.
I want to know how could I make it faster on loading web pages.
Note: my network environment can not be changed!
I just installed Ubuntu 9.10 in a dual boot Vista system (DELL INSPIRON 530). Everything was ok except the wireless network configuration. Afrer checking on the Internet I realized There was an issue with my network card (Broadcom BCM431. I first tried to install the drivers using Ndiswrapper with not succes. Finally, I was able to use the b43 driver by installing b43-fwcutter. Now the driver is shown and active in the Hardware Drivers Utilily. I am even connected to my Wireless Network. However, I cant load any website. I have checked the parameters in the network set up. I have even tried different options, like static or dinamic IP. But I cant load any website.
View 2 Replies View RelatedSome pages on the Internet will not load. What is the remedy?
View 1 Replies View RelatedI am Using Ubuntu 10.04 fresh install connected to internet via VPN Network.Internet works fine i can dowload mail and send. But for some reason i cant load some webpages like Facebook, Adobe and etc.I install all the newest programs Java, Flash anything.I'm runnung Firefox 3.6.9.I tried everything disabled IPV6, Proxy. But nothing solved it
View 5 Replies View RelatedI am currently using Open SuSE 11.3 and connect to the internet through a fixed wireless terminal (CDMA Wireless modem), Huawei ETS-1201 with BSNL connection. The problem is that, after dialling and connecting to the internet, some pages dont load randomly. Sometimes, Google loads quite fine, but other times, it is just stuck and I have to reload the page several times. When I connect through Windows, I have no such problem. I have used Fedora, Ubuntu and Sabayon but the same problem exists. I don't want to return to Windows but is frustrated with my web experience on linux.
View 2 Replies View RelatedI am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
Two very simmilar laptops connected to the same WiFi router loading the same web pages. Firefox on Windows does that for 3 secons, while Firefox on Ubuntu needs 1-3 minutes to load the same page. What could be the reason for this? Any idea how to fix it? The laptop with Ubuntu runs 10.04 LTS (lucid), Firefox is 3.6.10 and on any other WiFi network it loads the web pages really faster but why is much slower than Windows now?When testing the speed on URL...Ubuntu loads times faster than Windows. The WiFi router has been reseted. Firefox has been started in -safe-mode, both didn't help.
View 4 Replies View Relatedbrowsers consistently hanging and not fully loading web pages. this happens in all the browsers i have tried. Opera and Chromium and Firefox. This only happens in Ubuntu. All the other computer in this house load fine and this windows side of this computer loads the pages the right way. At this point i don't know what to do but keep hitting stop and reload and few time till the page loads. can anyone help with this? Also I have tried to clear the cashes. One question where do the temporary Internet files go so I can manually clean that folder out. And also Firefox isn't to bad and the other browsers I just don't like it that much as I like the opera.
View 2 Replies View RelatedI'm having trouble with Firefox hanging. It takes at least two attempts to launch, having to force the initial blank page to quit. Often it will freeze my desktop when loading new pages, and I have to force quit. I've upgraded to 3.6.17 but no difference. The Mozilla help page suggests disabling add-ons to find the problem, but to no avail. Chrome works OK but I'd rather use Firefox.
View 6 Replies View RelatedI recently bought my laptop (Fujitsu nh540) and installed FC14 on it. I have Integrated WLAN Atheros HB97 (IEEE 802.11b/g/n) (more info here about the config) running on: 2.6.35.13-91.fc14.i686.PAE
Since I installed FC I've had problems with the internet. In any browser pages load very slow, it looks like the browser waits some seconds, sometimes even 1-2 minutes until it actually starts to load the page.
Second thing I saw is that when it boots I keep getting:
Determining IP information for eth0... failed; no link present. Check cable? [FAILED]
But I have WiFi internet. I am not using a wired internet connection.
I installed madwifi driver (compiled it, after reading some info on google and it seems it should be good for my network) and it seems it's a bit better, but I still have to wait some seconds until it starts loading pages. I tried different browsers, it makes no difference. On my other 2 laptops I have no problems, the internet works fine, same goes for my android mobile phone. Another "nice" problem I noticed is that when compiz is enabled I see incoming video on skype black and the same black screen for some movies with some programs. After disablig compiz, all works for video.
I'm running Suse 11.1 KDE 3.5. My wireless is working absolutely slow. Pages aren't loading fast and I timeout when trying to do online updates. Here's some information:
Device: PRO/Wireless 3945 ABG [Golan] Network Connection
Kernel Driver: iwl3945
All my firmware seems to be in order.
/usr/sbin/iwlist scan
lo Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed : .....
ping -c 5 Google
Google ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4027ms
I have been investigating some security precautions over the past several months. I use Ubuntu now instead of windows and FIrefox browser also. I have installed BetterPrivacy, WOT, NoSCript and a few other add ons. I have SELinux, ClamAV, AIDE, and chkrootkit installed for Ubuntu.
When we browse certain web sites, we get an error about the server being reset. However, when I put the Ubuntu install cd in and browse with Firefox, obviously with no add ons or settings changed, we can browse to the site with no problems. We are trying to be secure on the internet and I don't want to lower or get rid of any of the settings / add ons we added. What would cause servers to reset when using Firefox / Ubuntu with browser add ons / OS addons?
I' have FC10,firefox3.0.4it take ages to load any page.the d/l speed is good .but while loading pages it takes a lot of time!while on XP everything works fine even though the the firefox version being an earlier one than FC10
View 4 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedI'm very new to Linux, and I have ran a Windows XP server before, with a Apache2 Server software for Windows. and didn't have any problems with it, but I really want to set this server up with Linux.
The server is running, but the only thing that comes up in the browser, is the html pages, the pages call all the images from a folder /images/ but for some reason I can't get it to pull the folder up. None of the graphics show on any of the pages.
I also have a VirtualHost setup, and have another website set up in the DocumentRoot with the 2nd site, but it won't come up ether, even tho it is listed as the 2nd VirtualHost, and have that folder set up as the DocumentRoot.
I'm just using IP Addresses for now till I get this all sorted out.So if I enter the IP the main page comes up, just no graphics. if I enter the IP Address/2ndSiteFolder/ I get a directory listing with the 2nd site folder listed, so now if I click on the 2ndSiteFolderName, it comes up as IP/2ndSiteFolder/2ndSiteFolder/ Now the 2nd site comes up, and so does all the Graphics for that site, even if I go to some of the other subfolders site. So its just weird. I don't know what I need to do to get this to work right.
I know it has to do with setting up the folders for VirtualHost, I just don't know what it is. I have been working on this for a week, and I'm not getting anywhere..
I've a folder named "lynx" in my desktop . It contains ebooks - pdfs,chms etc . The problem is sometimes when i open the folder in nautilus , the folder keep loading forever and sometimes it shows two or three files and keep on loading . But at some other times , folder contents are displayed just as any other folder(i.e normal ).
View 5 Replies View RelatedI installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
Following changes were made to all the sites
Code:
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I installed apache2 with 'zypper in apache2 apache2-doc' and there's no man pages,
tried
man apache2
man apache
man httpd
I tried to make that as short and descriptive as I could. There are certain web pages that I try to visit on my Linux computer that either respond after more than a minute of waiting for a response or, more often than not, simply do not respond at all - leaving the browser "waiting for xxxxx". Yet when I try those same pages on my GF's Windows computer, connected to the same router/DSL connection, the pages load quickly and without problems. Both systems are running Firefox.. One of the pages, for reference, [URL]..
View 5 Replies View RelatedI've just installed Ubuntu 9.1 amd64 and I have a problem with acces to some web pages (i.e amd.com, adobe.com). I looks like bowser load a page but then stopping it last infinitely. I have Ubuntu 9.1 x64Atheros wireless adapter connected to ZyXEL access point.Parallel Windows machine which connected to te same router has no prblem with access to those sites. I tried different browsers, different setting of DNSeven set up different versions of 9.1 (x64, x86)
View 2 Replies View RelatedIf I surf the net and reads webpages everything works great.But if I forxample try to write a comment in Facebook, I have to minimize Firefox, then maximize. Writing works fine
View 4 Replies View RelatedAt the moment I regularly use Image Magick convert command to convert PDF's to images which is great but I would like to only convert some of the pages in the PDF instead of them all. Im sure the function must be available I just haven't been able to find it even after bashing google for a few days.
Code:
convert *full.pdf test%d.jpg
this is the command I use at the moment.
I like to read help files offline, but downloading one page at a time is extremely tedious. I never see a "download all pages" option.
View 2 Replies View RelatedI am a web developer and fonts are crucial to my job.All i want is firefox to render the fonts just like if im on a windows machine, is this possible?For example i install tahoma and microsoft core fonts but in the FF they're not appearing right. This is a straggle to my work and believe me, i 've searched the entrire internet for a solution!
View 8 Replies View RelatedDoes anyone know of any man pages that would provide me information on commands in shell scripting like while or case? I have a test tomorrow where we have to write shell scripts and we're allowed to use the man pages, but not allowed to look at previous scripts. I don't feel like memorizing a bunch of commands if I don't have to.
View 5 Replies View RelatedI tried to use abiword and when I pasted it, all the html and css code was gone. Is this for continutiy between posts or is it for security; the web page does not want individuals to be able to hack the site
View 9 Replies View Related