Ubuntu Servers :: Connecting To Server Through Internet Links To Router
Feb 20, 2011
I have an Actiontec GT724WGR and I am having problems with my Ubuntu server. I set up a subdomain on freedns.afraid.org with my main computer's external ip. However whenever I use the link that was made it goes to my router configuration page instead of onto my server. I have already set up a static ip for my server enabled DMZ hosting and under port forwarding applied every single rule that applied to servers.
View 2 Replies
ADVERTISEMENT
Mar 14, 2010
I just finished setting up my small server, however I realized that no one can connect to it from the outside. The reason being is that my router is assigning internal ip's and dyndns is linked to that. I need port 80 for the Apache server, but if I have the router forward that port to my particular ip, won't it screw with everyone else's internet too?
View 5 Replies
View Related
Oct 11, 2010
I just installed Fedora Core on my Dell Inpsiron B130 laptop and I am having trouble connecting to the internet both wirelessly and with an ethernet cord into the router. When trying to configure my network, I dont recognize any of the ethernet adapters in the drop down list. I have been told that my wireless card is Linux compatible (dell y8029 dell wireless 1370 802.11/a/b/g mini pci). My ethernet card is a B130 Broadcom Ethernet Driver which isnt in the drop down menu either.
I read that I need to download an ndiswrapper but I dont know where to find this download AND even if I could download it to a zipdribe, I have trouble opening a USB flash in Linux becuase its not a "valid block device". This is after the command "mount /dev/sda1 /mnt/usbflash"
View 4 Replies
View Related
Aug 6, 2010
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
View 2 Replies
View Related
Jan 14, 2010
As far as I can tell, the server guides only explain a bit about what dynamic routing is, but not how to implement it.
My situation is this:
We require a server with 3 interfaces. One local, one to a vsat link and the other to a fibre link. The fibre will be the default route for Internet traffic but we want dynamic routing to automatically switch to the vsat link when the fibre link goes down (which happens fairly often in Zimbabwe!) and then switch back to the fibre link when it comes back up again.
The first option would be to handle dynamic routing on a Cisco router, but at the prices of Cisco devices here, it's not the most affordable option.
View 3 Replies
View Related
Sep 30, 2010
The dhcp doesnt work unless i put a switch or router between the ubuntu gateway and the connecting computer.
setup
Code:
Code:
Code:
Code:
Im on ubuntu 10.04. is this normal? or should i be able to connect without having a router or switch between the ubuntu server and the internal network....
View 3 Replies
View Related
Sep 3, 2009
I want to use centos as a developer server on my desktop before deploying my stuff to the internet.
I have a netgear DG834G router. It's IP address on my local network is 192.168.0.1 and connected to the adsl line. The router is set up to act as an dhcp server too. On the router I have reserved ip address for the nics per their mac addresses.
My server is on a dual boot desktop. The other boot is XP and works fine, picks up dhcp.
I don't know how to connect Centos to the router.
I have tried to play with the network manager but to no avail.
I can ping localhost, interface eth0 is there, but i can't ping to the router.
I have set the manager system/administration/network to get dhcp automatically.
I can't activate the eth0 although the hardware device says it is OK.
I've looked at firewall and iptalbes.
View 2 Replies
View Related
Jul 30, 2011
1. Need to connect 2 CCTV DVRs and view from remote. 2. Can get a static IP address. But I dont know if this is a secure way since any once can view if the know the ip address. 3. Question is : is it possible to connect the DVR( s) to a linux server which will get user name and password before letting us view the DVR. Currently there is one set as follows: 1. From location X a device is connected to location Y using leased line and static IP (12 kms distance). In location Y a router is placed and port forwarding is configured. From Location Z using internet and remote desktop concept the device at location X is viewed and data captured. Is it possible to use a similar concept but with some sort of security authentication procedure in place.
View 1 Replies
View Related
Feb 11, 2011
I have two routers in the same apt. building and just need to extend the wifi so the whole building can use. Using a netgear router (router x) as the secondary router without WAN how can I get internet from router y? What values should I put where in the NETGEAR config?
View 7 Replies
View Related
Jun 10, 2010
I just installed Ubuntu server edition on to an old Dell desktop. The only problem is that I can't get the Internet to work. I have tried the following and I guess it doesn't work:
Code:
sudo ifconfig eth0 192.168.1.52/24 up
sudo route add default gw 192.168.1.1
Each of those commands don't give me any error and it would seem like everything works fine, until I try to ping google or any website and I get an error that tells me that no host was found. I am using version 10.04 of Ubuntu server.
View 7 Replies
View Related
Feb 9, 2010
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies
View Related
Jan 13, 2011
I'm getting my first server in a few weeks. I hear a lot about people using their server as a router. That sounds like an interesting prospect, as I think it would increase security and control, with all web traffic going through one central hub so to speak.If I do this, how do I handle wireless? Do I just hook my wireless router to my server, basically making the internet connection go through the server before it gets to the router?
View 8 Replies
View Related
Jul 29, 2011
Im having problems turning my server into a gateway. I followed this guide- [URL]- and I cant get it to work.In my server I installed two new gigabit network cards, and I cant seem to be able to get it to work.
View 2 Replies
View Related
Feb 2, 2010
I recently switched a computer running PCLinuxOS over to Fedora 12. I used to have PCLinuxOS set up as an SSH server so that I could quickly and easily share files with other computers in the house. Since the switch, other computers cannot connect to the SSH server unless I use sudo. I cannot set up a network connection in the GUI; "Unable to connect to server. Please check your settings and try again". Same thing happens if I use the ssh command without sudo. Is Fedora blocking something?
View 1 Replies
View Related
Dec 9, 2010
I build a LAMP server behind a router. The current situation is:
1.I could access index.html of apache within the LAN.
2.I could access the vsftp outside of the LAN.
3.I could access the ssh outside of the LAN.
I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).
I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74. Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
View 3 Replies
View Related
May 27, 2010
I've setup OpenVPN-ALS (formerly known as Adito) on Ubuntu Server 10.04 edition. I have a security router (Untangle) in front of my internal network. I have a domain name and an SSL Certificate setup on our security router. I can access our web interface on our security router with no problems.
I've setup a portforward rule on our router to access this OpenVPN-ALS portal and I can access it, but I get an invalid certificate message. So I've bought another SSL certificate to install our our Portal, but I'm getting an error message when I enter in our information at the provider where I've bought the certificate.
Common Name does not contain fully qualified domain name. I'm not sure what the problem is. Do I use the hostname I've setup on the portal or do I use the hostname on my security router when I setup the SSL certificate on our portal?
View 5 Replies
View Related
Mar 11, 2010
I've had my PC connected to my router since I installed Ubuntu. My router has the address and name password for my ISP. I'd like to plug my PC directly into my ISP line, but the network manager won't find the connection, and I don't know how to tell my PC my ISP's address and the name and password to logon with. I set up my router, and I know how to make the connection in XP, but I don't know how to in Linux. I have very limited Terminal experience.
View 9 Replies
View Related
Jun 21, 2010
I have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
View 2 Replies
View Related
Jul 18, 2010
I downloaded wubi, installed ubuntu, and booted it up. Everything went smooth, it finished installing with no problems. It restarts again and I login. Firefox opens.....server not found.
That brings you to where I am now. It says that eth0 is connect. I manually changed the ip address, the netmask and gateway. Still I have no luck.
route reads as follows:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255
[Code].....
View 3 Replies
View Related
Oct 27, 2010
When I start Ubuntu at work it automatically connects to the router every time. At home the router signal is quite weak but manually connecting via NetworkManager Applet 0.8 was successful for a week or so. In the past week, however, although the router appears in the list in Network Manager, it has stopped working and is unable to connect. Nothing has changed with the router or hardware in that time.
This is a new laptop which had Windows 7 pre-installed. Windows 7 connects to the home router successfully every time. I really don't want to use Windows 7 but until I can get this fixed I have no choice.
I don't know if it's relevant, but once I tried deleting the AUTO Home connection from Network Manager and was then able to connect on the next attempt, but this has not worked since.
View 5 Replies
View Related
Oct 5, 2010
Ubuntu 9.04.
Belkin Wireless G router.
Has been working fine. Today it is not. I have done nothing to it. It just keeps saying "Looking up *********" and "Cannot connect to server".
I hard wired the pc to the modem and it works fine. Hard wired the pc to the router it works fine. Running wireless, both of my computers are not connecting.
If I remember, one of the lights on the router should be lit solid, just as it is on the modem. However, all lights are blinking. The only solid light is "power".
View 2 Replies
View Related
Oct 30, 2010
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies
View Related
May 3, 2011
I am using an HP dm3 1030us laptop. The wireless adapter is and Atheros 5009. I have a fresh and clean install of Ubuntu Natty in it. I am trying to connect to a Linksys WRT54G2 that is in G mode using WPA2 Personal with AES. Router info:
Router Information
Firmware Version: 1.0.01 build 003, Mar. 26, 2008
Current Time: Mon, May 02 2011 20:34:37
MAC Address: 00:22:6B:4A:44:DF
Router Name: WRT54G2
Host Name:
[Code]...
View 4 Replies
View Related
Apr 20, 2011
is a way to get a HP Deskjet F2420 all in one printer to start working when connected to a USB port in wireless router ASUS WL-500gP V2? The hardware store guy said it will work, I believed him but cannot figure out what to do to really make it functional. Shall I return the thing...?
View 9 Replies
View Related
Feb 4, 2010
I am using fedora 12, for about 2 months and now I am facing for the first time a problem with the wireless router. After a router restart my computer cannot connect with the router even if it is listed along with other access points on the list. I am sure the password is right because I am currently online with my windows partition using the same router.
Output of iwconfig when not trying to connect
Code:
Output of iwconfig when trying to connect
Code:
Output of ifconfig when not trying to connect
Code:
The wireless used to be working fine until the router restart (switch on/off the hardware) has happened
View 2 Replies
View Related
May 30, 2011
When I copy and paste something from a web site, links to pictures are inserted, not actual pictures.
When I disconnect from the Internet, I cannot see pictures which is annoying.
Do you know how to make LibreOffice copy and paste actual pictures into a Writer document?
View 2 Replies
View Related
Jan 3, 2010
For several months I was using EDUP adapter with both my laptop that operated on Ubuntu 9.04 exclusively and a desktop that could also boot with XP. Soon after 9.10 was released I updated my laptop and was able to use the adapter to connect to the Net.Recently, I also updated the desktop but also made it exclusively a Linux machine. Unfortunately, I have been unable to get the wireless adapter to work again on the desktop.The OS recognizes the device as wlan0, and lsusb shows:Bus 003 Device 005: 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL -125The network manager recognises the availability of the wireless network and attempts to connect. After trying for a while it comes up with a dialog box "Wireless Network Authentication Required" and in response I enter the WPA password but with no success.The behaviour would indicate that I am entering the wrong password but I am not.I have checked it several times and compared with the password that works with the laptop.
View 3 Replies
View Related
Aug 13, 2010
Need help, ubuntu keeps connecting and disconnecting to my wireless router. whenever i am able to get it to connect for a significant amount of time, i still have no access to the internet.
using ubuntu 10.04
using Linksys router, not sure what model but can find out.
using toshiba satellite laptop
I am able to access my router and internet in Windows without any problem
dont have anything of importance on ubuntu install, so i could reinstall but would rather not so that i could fix this problem in the future.
View 1 Replies
View Related
Dec 8, 2010
I am having some bizarre problems with a 10.10 install which I am hoping someone here can give me a little input on. Some background info: I have a laptop which I had originally put 10.10 on about 4 weeks ago. I was using the Network Manager applet to change the MAC address by entering a valid MAC in the "Cloned MAC Address" field, and then connecting to a network. This suited me fantastically as the applet applies the MAC to any interface that connects - ie. the internal Intel card or the more often used external USB RTL8187L. For reasons which would take a lot of explaining (and now kicking ones self in the head) I had to install Windoze on the machine for a week to get some specific stuff done - but have now come back to 10.10.
The problem: So just as before, I installed 10.10, connected to my router (without changing MAC) installed system updates and other packages such as Macchanger etc and got the system working and customised how I like it. Problem is, now when I enter an address in the Cloned MAC address field and attempt to connect, the applet just sits there with the pulsing waves likes it's trying to connect but it cannot. Whilst this is happening, ifconfig -a shows that the MAC has indeed been changed. Until I remove the Cloned MAC address entry, I cannot hop on my router - or any other for that matter. Before, these steps were enough to ensure correct and functional cloning.
Things to know: This happens whether I am logged in as me or root. There is no MAC address filtering on 3 routers I have tested on (different brands). There is only MAC filtering on a 4th, and in that case, the cloned MAC is in the routers whitelist. This happens whether I specify IP details and if DHCP is used. All 3 routers without MAC control have been reset. All settings to do with wlan0/wlan1 in the network applet have been removed and re-entered. It happens on 2 different wifi cards (Intel and RTL8187L) but they worked before re-installation. I have also tried the usual commands in the terminal such as:
su
ifconfig wlan0 down
macchanger --mac (mac here) wlan0
ifconfig wlan0 up
also tried hwaddress ether 12:34:56:78:90:00 etc - The problem doesn't seem to be in changing the MAC, more the functionality of wlan0/wlan1 afterwards. I have also tried (although, it worked fine without this before) adding lines to /etc/rc.local and /etc/network/interfaces. It would be worth noting that either networking was restarted or the machine was rebooted after each alteration. No avail.
I can't think of anything significantly different that I have done to this re-installation compared to the first time, so I am not sure if perhaps in the time that it took me to reinstall 10.10, a package update has come out which has altered something and it's chucking a spanner in the works. Having said that, I even reinstalled AGAIN without applying any updates and same result. I would consider myself moderately experienced with Linux - so I am pretty sure that I am not making a complete n00b mistake... this situation is just so puzzling. I have been googling for quite some time and can find others with similar problems, but no actual solution.
View 9 Replies
View Related
Dec 15, 2010
I have installed Ubuntu x86 10.04 LTS onto an old Dell machine which is connected to my broadband modem and Netgear Wireless Router (WGR614 v6). The router is encrypted with 64-bit WEP and allows my System76 Pangolin Performance laptop to connect flawlessly out of the box. However, my sister runs Windows XP Professional 32-Bit on a Dell Latitude D830. This machine's wi-fi card is an Intel PROSet Wireless which recognizes the router but can't access it.
What should I do on her laptop in order for her to access the wi-fi router?
View 1 Replies
View Related
