Ubuntu Servers :: Apache - Index.html Suddenly Became Blank Page
May 20, 2010
Today, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies
ADVERTISEMENT
Aug 25, 2011
My setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
View 6 Replies
View Related
Mar 9, 2010
I used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies
View Related
Aug 16, 2010
Do I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?
View 3 Replies
View Related
Sep 15, 2010
I've got a perl script which generates an html file. What I'd really like to do is send people to just one page (the perl page) which then generates the html and shows the html page in question. Thus the whole transition will be invisible to the user, they'll just have an html page.FYI the perl script generates a list of the users who last logged in to the system, it needs to be up to date (by the second).Let me know if this isn't clear, I understand it sounds a bit confusing...
View 4 Replies
View Related
Jun 8, 2009
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies
View Related
Jan 4, 2010
I have a ubuntu 8.04 server running apache2 and would like to allow a CGI script to be executed when visitors come to my site.The purpose of this is to determine which browser the visitor is using and redirect them to the relevant version of the site.
View 9 Replies
View Related
May 26, 2011
I'm having a bit of trouble getting my index.html to display. when i use [URL] and type in my dyndns url i just get "index of /" and not the index.html page
ive got a index.html in var/www and home/gav/public_html and set chmod -R 755 to the index.html
and still no joy....
gav@lapfrog:/etc/apache2$ gksudo gedit httpd.conf
Userdir public_html
Options +Indexes
Options All
[Code]....
View 7 Replies
View Related
Mar 4, 2011
Whenever I try to edit my index.html file with Winscp (SSH), it says I don't have the permission to do so. Is there anyway I can change that?
View 4 Replies
View Related
Jun 12, 2011
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies
View Related
May 8, 2010
I have created a php page with only
PHP Code:
<? php echo "OK"; ?>
in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream:
Code:
GET /services/test.php HTTP/1.1
Host: 192.168.1.5
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
View 6 Replies
View Related
May 10, 2011
My apache ignores index files (index.php ,index.html ,index.htm , ...) and while these files exists in directory apache lists directory content!I mean http://localhost/test/ lists directory content instead of showing index.php!
View 9 Replies
View Related
Jan 26, 2011
Ive looked up and down but i cant seem to find an answer to my question. Why cant i upload to my ftp site. I am running a lamp server and i installed proftp. i created users and groups. i tested my server and its working fine. but now when im working on dreamweaver to connect to my ftp... It connects fine i can download my files from the site but when i edit them and try to "put" them back. i get an error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
[code].....
View 2 Replies
View Related
Jan 11, 2010
Ubuntu 8.0.4,GnomeDesktop with firefox (we are going to use) Epson Thermal printer(M-T500 Thermal Printer) [URL]... without linux driver,provide serial port ctrl. I get the command manual(pfd).I can test the command by run minicom however. I want to print the Web page (.html) provide by our web servers.Those pages have a js-button(javascript) each with the function that the firefox/or (custom) app demo is called to print the line/table/div/etc (not the whole page,like the receipt) after the js-button is pressed. There is a window showing the print-progress info will be better when it is printting. I just try to find the best way to do this: I got ghostscript after search by google but it is just used for pfd print or something. So How can I just implment this?
View 1 Replies
View Related
Aug 26, 2010
I seem to be unable to use the html
Code:
include virtual="test.txt" I have tried following the advice in this thread http://ubuntuforums.org/showthread.php?t=1510098 but it makes no difference. The file is there, but the line is delivered to the browser as-is. Using Lucid and a new install of apache 2.2 from the repository.
View 7 Replies
View Related
Nov 25, 2010
I'm trying to blind deluge torrent to port 80 but as I'm running already a server on this port, I've decided to use the ProxyPass option in a vhost. As I prefer running through HTTPS, I've used my vhost 443 that I already use for bind AjaxTerm (SSH with a web interface)
But whereas AjaxTerm works, Deluge doesn't...I only get a black page but the tab name is correct (ie, Deluge: Web UI 1.3.1)
Here is my vhost
Code:
<VirtualHost *:443>
SSLEngine On
SSLCertificateFile /etc/ssl/private/localhost.pem
ProxyRequests Off
[Code].....
View 1 Replies
View Related
May 7, 2011
Since I upgraded to 11.04 on my Server edition I have been experiencing some problems with my FTP-server and Apache. Apache just says that the page is "forbidden" if I'm not logged in on the server, which means I need to go to the server and physically log in or I can do it trough ssh but then when I close my ssh client on my work computer the page is "forbidden" again. And I cant seem to reach the FTP-server from an external address so I need to be in the network to access it.
It says something like:
Code:
An error occurred opening that folder on the FTP Server. Make sure you have permission to access that folder.
200 Switching to ASCII mode.
227 Entering Passive Mode (192,168,0,194,233,166)
View 3 Replies
View Related
May 6, 2009
I have apache working,i have users set under admin group in /home/admin/username/html that is with an html publicfolder at the end, now permissions are set right, /html is set to mode 777, and the contents also inside them. But everytime i do a 10.0.11.25/~les i get a damn forbidden error code, its got me so pissed off and i dont' know whats the problem. This is the error i get: Forbidden 403 You don't have permission to access /~les on this server.
Code:
[Tue May 05 19:37:48 2009] [notice] Apache/2.2.11 (Unix) DAV/2 PHP/5.2.6 configured -- resuming normal operations
[Tue May 05 20:44:30 2009] [error] [client 10.3.0.254] (13)Permission denied: access to /~les denied
[code]....
View 10 Replies
View Related
Jun 12, 2009
With F11 installed Apache is having permissions issues reading files out of the html directory. Only wants to work with permissions set to read for other. [Thu Jun 11 23:25:28 2009] [error] [client 127.0.0.1] (13)Permission denied: file permissions deny server access: /var/www/html/index.html Tracked down the permissions issue. Is there a good reason not to change the group to apache and remove world read?
View 1 Replies
View Related
Aug 20, 2010
when I try to view my root directory of my website.if I go to URL... on my computer, it always loads the "It Works!" page. I deleted the original index.html page, and even replaced it - but if I go to URL... it KEEPS coming up.If I specify the page I want to view, ie.URl... it loads the right file.Is there a setting in the conf file that Im missing?
View 3 Replies
View Related
Mar 4, 2011
I have an apache server and /var/www/html/index.html startpage working fine. But I want to have files accessed by apache in my /home/beny/ director.
View 8 Replies
View Related
Feb 8, 2010
but ive two problems. 1st: The first is how do i change the default page on load up of localhost.eg when i enter the http://localhost/ i get the usual it works symbol.this is because its loading the index.html file in my var/www/ folder.i dont want too create another index file, but how do i change the configuration too load up a different one like home.html2nd: i tried installing sudo apt-get install phpmyadmin and for the most part it worked.but nothign comes up when i go to http://localhost/phpmyadmin/
View 2 Replies
View Related
Jul 15, 2009
I have apache installed and I have it all setup so that when I create a user, in their home directory i created a folder called public_html and then that user can upload web content. Users then can browse to their site by going to[URL],,.How can I get apache to show a different or default page if the user does not have a index.html file in their public_html folder. Cause if they dont, you get a 401 saying you dont have permissions to view, etc. So id like apache to default to something else if the user doesnt have a index.html.
View 1 Replies
View Related
Dec 30, 2010
I have a server that host's several sites, recently I had to create a new server because the old one isn't good enough for me. Ive installed apache2 on the new server and moved all the files from one server to the other. I'm making tests in my local lan so I've edited my computer's hosts file to point to the name of each site to the local ip of the new server:
192.168.1.85 www.mypage.com
192.168.1.85 svn.mypage.com
192.168.1.85 trac.mypage.com
I have all the site definition files in /etc/apache2/sites-available I also have the used a2ensite to enable each page.
Whenever o use my browser to try and access each of the sites I always get the svn.mypage.com page and none of the others.
here is some debug info:
Code:
sudo apache2ctl -S
VirtualHost configuration:
wildcard NameVirtualHosts and _default_ servers:
[Code]....
View 1 Replies
View Related
Sep 1, 2009
But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.
View 3 Replies
View Related
Jul 1, 2010
I just installed linux. How can I change the index.html file?
my dir is var/www/index.html
it doesnt allow me to delete it the index.html (permission denied) I can't move a file into it either. (permission denied)
View 7 Replies
View Related
Apr 6, 2011
I have displayed web pages (e.g., index.html) under fedora 4, 5, 7, 8 before with no difficulty. Now I troed to do similar thing under Fedora 12, and I cannot display index.html. Is Fedora 12 special? I did '#tail -f /var/log/httpd/error-log' and noticed a line:
"SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0"
Is the SELinux policy blocking me from displaying index.html page?
View 14 Replies
View Related
Nov 23, 2009
On FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies
View Related
Apr 13, 2011
For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
View 1 Replies
View Related
Sep 25, 2010
I need a script that can do this: A script that searches all directories and subdirectories for .html files When a .html file is found it creates a index.html file in that folder. It then edits the index.html file and inserts links to all of the .html files that are in that folder into the body. If no .html files are found, it searches for folders. It then creates a index.html file with links to all of the folders.
View 4 Replies
View Related
