Ubuntu Installation :: Retrieving Files From A Secondary Reiser Disk
Oct 19, 2010
I've been running various releases of Suse Linux on my home PC for about 6 years (currently running Suse 11.2). The old hard disk in that machine is starting to experience read errors, so I bought a new disk to put into the PC which otherwise works fine.
So I figure now is a good time to give Ubuntu a try. I plan to install the KDE version of ubuntu on the new drive, but once that's finished I will want to mount the old disk and copy as much as I can off of it onto the new disk (JPEGs, old documents, stuff under my home directory.
The old disk uses Reiser. I have read various threads concerning problems with mounting Reiser FS disks under ubuntu, but many of them are old so it's not clear to me what the current status of support for Reiser in ubuntu is.
I am planning to do the following:
1) Remove the old disk from the PC, put the new disk in its place.
2) Install kubuntu on the new disk.
3) Put the old disk back into the machine along with the new one with the old one being the slave/secondary disk so that when I power up the machine, it will be running ubuntu off of the new disk.
At this point I will want to mount the old disk so I can then start copying files off of it.
What do I need to do to mount the old disk, keeping in mind it uses the Reiser file system?
View 1 Replies
ADVERTISEMENT
Jun 24, 2010
So I had a problem with my ubuntu 10.04 on wubi. so i saved the root.disk and uninstalled it then reinstalled unbuntu 10.04 as another partition. I did the mount thing with the root.disk and now and trying to move files over. I need permission for that and its asking me for a sudo password and i didnt set one. i tried using sudo bash and its also not working.
Code:
igor@igor-laptop:~$ sudo bash
root@igor-laptop:~# mv '/mnt/usr/share/themes' '/usr/share'
mv: inter-device move failed: `/mnt/usr/share/themes' to `/usr/share/themes'; unable to remove target: Is a directory
View 2 Replies
View Related
Nov 3, 2010
I'm running CentOS 5.5.
A couple of weeks ago, my 500 GB disk crashed after suffering an accelerating error rate for a couple of days.
Now that I have a new disk in place, I want to mount my old disk, which is (was) an LVM disk, as a second disk and recover files from it if possible.
The question is, how do I go about this?
If I mount the old disk:
# mount /dev/sdb1 /sdb1
the top-level directory shows only two subdirectories:
lost+found, which is empty; restored, which is an image of files recovered from old disk's predecessor.
'df' shows (or appears to show) that the disk is 11% full. Sorry, I don't recall how full the disk was before it crashed.
How do I get the system to recognize the LVM structure on the old disk & mount it?
Or is the directory structure too corrupted? Do I need to send the disk out to a recovery service?
P.S. Have aleady done some poking around with lvmdiskscan, which shows the old disk whether it's mounted or not, and vgchange -ay, which doesn't appear to do anything.
View 1 Replies
View Related
Jan 5, 2010
within the last 24 hours I have lost a reiser formatted disk. It is not visible not with df or fdisk.Which tools do you normally use in a situation like that.
Disk /dev/sda: 40.0 Gb, 40020664320 byte
255 heads, 63 sectors/track, 4865 cylinders
Units = cylindre of 16065 * 512 = 8225280 bytes
[code]....
View 5 Replies
View Related
Dec 4, 2010
I'm installing 10.10 on a Dell laptop it appears the installation has stalled while retrieving file 26 or 64. It's been on this file for about an hour now.
View 9 Replies
View Related
Jan 12, 2011
A co-worker was asking me if there was a way to recuperate his child's baptism photos from his HD after it had been reformatted following a crash. I heard that this was possible and even downloaded a few trial programs, but have yet to try them.
View 2 Replies
View Related
May 8, 2011
I've been having a problem with this "BusyBox", and unlike windows, my files are not able to be "stolen" to another operating system. I need to get my files back from /home back.
View 1 Replies
View Related
Jan 17, 2010
I have the default Conky script, but want it to also monitor my secondary drive.
View 9 Replies
View Related
Jul 9, 2011
How to mount secondary new hard disk in fedora?
View 2 Replies
View Related
Apr 12, 2010
Is there any hope of getting a WD10EARS 4k-sector disk to work properly as a secondary under Etch? Just wondered if anyone had a fix before I RMA and return it as "Not suitable for purpose" WD say it should be OK with linux. But it ain't. It gives very poor perfromance, with a lot of hesitation. The issue is apparently one of sector boundaries, but the exact details are extremely complex.
View 14 Replies
View Related
Jan 28, 2010
My system is setup like this: 1 250 gb HDD, with a 20 gig partition for /, 200 gigs for /home and the rest is a swap file. I also have a 1 TB (ext3) and 1.5TB (ext4) hard drive that are also installed, mounted to /Shared_1TB and /Shared_15TBI just installed Ubuntu 9.10 and everything seemed to be fine. I installed all the updates, install the Nvidia proprietary drivers and got my HDMI audio working. I went to try and play a video to see what would happen.... there are no files in /Shared_1TB. It is totally blank. I tried making myself the owner, and while this worked it didn't help anything. I tried unmounting and remounted, however it kept saying it was busy and wouldn't remount it. At this point I was a little panicked, so I threw in a LiveCD and low and behold once I mount it in the LiveCD all my files are there.
View 5 Replies
View Related
Mar 19, 2010
Is it possible to somehow setup a secondary group of log files that log every action taken on the server where your average user wouldn't know that they're being logged. Perhaps if a hacker got in and messed around or something you'd be able to see what they did, but they wouldn't have permission to modify the file.
View 1 Replies
View Related
Mar 4, 2011
I include a description and several outputs below, throwing some light on the problem.Does anybody have an idea ?dvanceMikeDescriptionI'm running openSUSE 11.2.The partitions are on a seperate SCSI disk.The partitioner (under YAST) finds them and lists themas Reiser partitions.The disk isn't just some old errorneous drive:it was a spare disk not used very even after putting it in use,and smartctl gives
Code:
(host):~ # smartctl -a /dev/sdb
smartctl 5.39 2009-08-08 r2872~ [i686-pc-linux-gnu] (openSUSE RPM)
[code]....
View 8 Replies
View Related
Feb 11, 2010
I had Lenny installed on my Acer Aspire laptop however I've had to try to reinstall it.The installation stops at 'Retrieving file 811 of 811' from the ftp server and thats it.I've tried a few times with the same result and I have done many installs without any issue except for this time.
View 4 Replies
View Related
Jun 16, 2010
When installing Ubuntu Server 9.10 (onto a gatewar 6400), it hangs at the screen Retrieving libc6-udeb. How do I fix this?
View 3 Replies
View Related
Apr 26, 2010
I want to know how to retrival partial files from a lto 4 tape instead of retrieving the complete tape.
View 2 Replies
View Related
May 29, 2011
i'm doing a fresh network install of f15 from a usb stick. the installation has now been stuck on the "retrieving installation information for fedora 15 - i386" stage for over an hour. on previous releases this stage has only taken a few mins. i can see from my router that there have been thousands of packets sent and received from the laptop. i've searched all the normal places but can't find anyone else reporting this. does anyone know if this is a known bug (and if there is a fix) or if this stage takes significantly longer in f15 to any previous release ? cheers.
---------- Post added at 07:54 PM ---------- Previous post was at 07:12 PM ----------
finally got to the next stage after nearly two hours. no idea why it took so long.
View 1 Replies
View Related
May 8, 2010
I'm having some problems booting ubuntu 9.10 and I just want to backup my files and install it all over again. I want to access my old files from the ubuntu Live CD, because no kernel is working. Is there a way?. Just in case, I don't have partitions, so I don't have a 'home' one (but I'm going to).
View 1 Replies
View Related
Jul 4, 2011
When i try to install UBUNTU 11.04 it shows me the warning that there is no OS on my hard disk.But i have windows XP SP3 & UBUNTU 10.04 on my hard disk. Will all the files be deleted on my hard disk containing Windows XP if i install UBUNTU 11.04? How can i solve the problem?
View 3 Replies
View Related
Jan 18, 2010
Currently I am running Ubuntu 9.10 on an older P4 system with EIDE harddrives. My primary HD has a WinXP installation and GRUB. Ubuntu is installed on the secondary HD.
I am happy enough running Ubuntu that I would like to remove my WinXP disk, move the disk with Ubuntu on it to be the primary boot drive, and then install a new drive as the secondary.
However when I tried to simply move the drive with Ubuntu on it from the secondary to the primary EIDE position the system would not boot. I assume that this is because there is no boot loader currently on that drive.
how do I put GRUB on the Ubuntu drive so that it can become the boot drive? Or is there some other way to accomplish what I am after without having to reinstall Ubuntu?
View 4 Replies
View Related
Jan 17, 2010
"The installer encountered an eror copying files to the hard disk: [Errno 30] Read-only file system
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. ..."
Before I try changing CD drives, re-formatting the hard drive (again), or cleaning the CD drive, I must add that Xubuntu did open. I got rid of all traces of the previous operating system (WinME), and Xubuntu seems to work pretty well. The installation stopped at 41% of copying files. Should I aim for a finished installation or is this fine?
View 9 Replies
View Related
Dec 2, 2010
Each time, different methods, I get this about 3/4 of the way through:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
The only possibility of those is the CD being bad. But I've used it before, recently, and it was fine. I will burn another one from my other computer and try, but it shouldn't be doing this.
Question: If I plan to only use Ubuntu on this computer (no dual boot) should I make the /,swap and /home partitions all Primary or some logical, or does it even matter?
View 6 Replies
View Related
May 10, 2011
I was installing Ubuntu to the internal disk in my main machine, with all external drives unplugged for safety - then discovered I had accidentally chosen the external drive and it wasn't unplugged. (Seeing three drives not two listed as installation targets should have tipped me off, but I guess my IQ was low that day.)The external drive, in compliance with Murphy's Law, was my backup drive with all vital current files.The last few months of work gone.Now the drive shows only the stuff I normally expect in / on any Linux machine. It mounts showing as ext4, but the disk was (I'm 98.5% sure) originally ext3.However, the installation did not finish.Whatever files got copied, clobbered only a fraction of the disk. df reports only 1% of the space used.Maybe the bulk of my valuable files are okay, and could be recovered with some tool?
There are other questions on this site about file recovery, but many are for Microsoft Windows, or for malfunctioning disks, or some other situation. I'm on Linux with a physically healthy external disk. I'm fairly sure that the more recent and more important files are in multiple copies on that disk, so if one copy is clobbered there's hope to get the second copy.
View 2 Replies
View Related
Feb 15, 2011
I'm trying to add my xp drive to the boot menu but I'm having some trouble with it. I've been going over dozens of topics on many forums and I still can't get it to work (I'm new to linux/ubuntu btw).
Ok, so, I have Ubuntu 10.04 on the main drive (primary master) and xp on a second drive (secondary slave) and from what I've read sec. slave is hd3. I added the lines I found in another thread (here I think) but when I tried to boot xp it said the drive didn't exist.
Here's my menu.lst file code...
View 4 Replies
View Related
May 1, 2011
I have an EeePC 901, with a 4gb SSD and a 16gb SSD installed. Trying to get Natty installed and hit a few problems not least of which, that it won't fit on the 4gb drive! However in my BIOS setup under HDD config it says:
Secondary Master=4gb
Secondary Slave=16gb
I have no other devices attached. Why aren't they Primary? And I can't seem to switch them round.
View 5 Replies
View Related
Jul 7, 2009
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
View 6 Replies
View Related
May 26, 2011
I've read the official documentation regarding hard drives and partitions. My pc has two hard drives. a 160gb primary hard drive with windows 7 a 1.5 tb secondary hard drive with about 80gb of free space I would like to know whether I can install ubuntu on the secondary hard drive, without touching any of the data present on that drive. From my limited understanding of storage, files are written all over hard drives during copy, move etc... Is the ubuntu partition manager smart enough not to overwrite any files during installation? Will I get a warning if there is a risk of any data loss on the secondary hard drive? I cannot backup any of the data on the secondary hard drive due to all my external drives currently being full.
View 9 Replies
View Related
Oct 19, 2009
i want secondary users can able to change the files permissions of primary group?user MAC is having www as a primary and httpd as secondary group. But he want to change the file permissions (chmod) httpd group files. Is it possible or not? I think its not possible. If it`s possible then let me know how?
View 3 Replies
View Related
Apr 15, 2015
If I wanted all localisation to be in English (UK)but also need somestmes to be able to type and read Cyrillics, which options shall I sellect diring installation? I do not need Cyrillics as the default.
View 5 Replies
View Related
May 22, 2010
I have a 6TB external eSata bay (Lacie BigQuadra). I made a GPT table with only one big ext4 partition. All was ok. I resized the ext4 partition and I created a 1TB NTFS partition. I can use it on Kubuntu but Windows 7 tell me the partition is not formated. When I go back to Kubuntu, parted tell me that the secondary GPT table is not at the end of the disk and tell me it's probably an other OS that thinks the disk is smaller that its real size. It seems Windows 7 thinks the disk size is 2 TB (and modify automaticaly the GPT table and create a secondary GPT table on the middle of the disk).
What can I do to make my NTFS partition visible in Windows 7? What can I do to prevent Windows 7 to move the secondary partition table on the middle of the disk and to modify the primary GPT table ?
gdisk informations
------------------
$ sudo gdisk -l /dev/sd
sda sda1 sda2 sda3 sdb sdb1 sdb2 sdb3 sdb5 sdb6 sdc sdd sdd1
[code]...
View 9 Replies
View Related
