I had an Ubuntu desktop 9.04. While I wanted to format my second hard drive with gparted, I have selected my system HD () with all my datas (/home, ...).In fact, my error is I have selected to rebuild my partition table and now I have lost all partitions . I would like to know how to restore my datas.
View 4 Replies
I was dicking around today and I deleted an LVM partition, is there anyway I can restore the partition and add it back to my volume group or is it game over?
View 5 Replies View RelatedI had to install a new disk drive in my PC a week ago because the old drive died. The new drive is a 160 gig drive. First I installed Win XP with S/P 3 and everything was fine. Then I installed Ubuntu 8.04 and the troubles began. Ubuntu resized the Windows partition down to 8.81 gig and used the other 137.44 gig for Ubuntu. When I booted into Windows I started getting nasty little messages about "not enough disk space". SOOoooo....... I booted using the Ubuntu install CD and ran "sudo gparted" in a terminal window. I tried to resize the ext2 partition but got an unknown error.
Then I ran fixmbr in Windows to get rid of grub. Then I tried running gparted again to delete the ext2 partition. Got an error that said "can't delete the partition because it's mounted". So I tried to unmount the partition but got a message that the command "unmount" could not be found. After that I installed Partition Magic in Windows and tried that. It sees the ext2 partition but says it's unsupported when I try to delete or resize it.
I ran fdisk but it doesn't see the Linux partitions either, so I can't delete them in that program. I finally tried to format the disk but now I have a 9 gig drive with nothing on it. How do I get those Linux partitions off the drive so I will have a 160 gig drive that I can start over with? I've spent 6 days this week reinstalling XP and all of my programs, and now everything is gone because Ubuntu decided to be a disk hog.
I was installing windows vista on my computer, so I backed up everything to a external drive which was formatted with ext2. I then proceeded to install windows vista. When I got to the partition section I tried installing windows vista to my raid 0. When it didn't work I decided that I would delete all my existing partitions and create a new one. Well in my haste I accidentally deleted my ext2 partition from my backup drive that was still connected. As soon as I realized what I had done I shutdown the windows install and disconnected my external drive. This is the current state of my drive from parted:
Model: WD 15EADS External (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
I know that the drive only had one partition before and that it took up the entire disk and it was ext2 (maybe ext3).
This might be a longshot but i used to use the 4 bay NAS here Which formated the HDD JBOD array to EXT2 , Anyway i want to move to an 8 bay DAS now but i cant find an application to convert the partitions .
Partition magic says the partitions are unformatted and the partition id is set to linux raid auto . Is there any way to convert this partition to vanilla EXT2 so i can use partition magic on it ? Its a 4TB array so copying isnt possible.
i m not able to copy a file over 16 gigs on an EXT2 or EXT3 partition. Is there a way to do this. I even tried to split my iso file too. I splitted my iso file in 4 files then copy them on the ext2 or ext3 partition. But as soon as I was trying to join the files together it never went over 16 gigs. Actually it stops at 16,843,020 kb exactly. is there a limit for those partitions or is there an another way to see my 20gigs iso file in one piece?
View 1 Replies View RelatedI need to mount my ext2 partition with write permissions for an average user. Right now, I can only write to the volume using sudo or the root account.
/etc/fstab:
Code:
# Filesystem: Mountpoint: Type: Options: Dump: FSCK:
/dev/sda1 / ext4 defaults 1 1
/dev/sda5 swap swap defaults 0 0
[code]....
can't add the options uid=500,gid=500 to the ext2 volume because it says "bad option" I have 1 question. If you have a volume listed in /etc/fstab, and you try to mount it with different options than the ones listed in fstab, will it mount with the new options, or the fstab options?(e.x. if I try to mount /dev/sda6 with: mount-o auto,user,exec,rw,async. Will it mount with async or sync?)
Will deleting dev/sda partition table ( msdos ) affect my windows 7 system? I am trying to install Fedora 15 on Virtual Box.
View 1 Replies View RelatedI work with a Debian Squeeze on my laptop and I have a 160GB external hard disk. My hard disk was formatted FAT32, but I decided to format it using ext2. I formatted it using fdisk from command line and everything went well. Unfortunately, when I mount my hard drive(which is auto-mounted from Debian) it has got root both as owner and group. Then I can't write to it because I have no permission to do that. Is there a setting to create an ext2 partition which has as owner the logged system user in order to have right permission every time.
View 7 Replies View Relatedi TOTALLY ****ed up my windows bootmgr, and, in some way, the linux partition too. I'd like to format the windows partition, but as all my info stays intact I'd like to conserve it that way. The only way I can think of, is to make a new ext2 partition on the same HDD y have windows ( I only have one HDD, so... ) and save the information there . Wich is the correct way to do so, without losing all my software and/or information??
Other details:
* Rright now, i don't have ubuntu installed on my pc ( I'm using a live cd ).
* I'm using ( or was ) win 7.
* The only partitions on my HDD is an ntfs ( 60 GB ) and an unallocated ( 240 GB )
I have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?
Since Mac OS X, runs a BSD Linux at the core I think that this is the correct place to ask about this, but I need cfdisk to make some ext2 and swap partitions on some Compact Flash and old HDs without needing to download any LiveCD. There is any cfdisk that I can use on my Mac?
View 2 Replies View RelatedI would like to know if it is normal to experience 10MB/s data transfer rates during copying between partitions on my local hard drives (Toshiba 250GB 5400rpm SATA) while having three times faster (30MB/s) transfer rates between local partitions and USB drives (Kingston 8GB).
View 2 Replies View RelatedOn my computer on the first disk /dev/sda was installed win2k system bootable with
native win2k bootloader. I created imges of that partition using Ghost4linux na Clonezilla. Images were placed on the second computer using sshfs. For all this tasks i used PartedImage LiveCD.
I removed old partition and created a new ntfs partition on the same disk. When I used GParted or native Win2k partitioner the partition I get was smaller: the difference is a few bytes. Finally I used the Linux fdisk. Now the size was OK, but after restoration win2k was unbootable: I tried to recover the win2k but it was even impossible to locate a system on the partition. So I tried to move all the partition at the very beginning of the disk. Now at least I was able to mount (under Linux) the partition. But again win2k was unbootable and unrecoverable.
It seems for me that the partition is missplaced. According to Ghost4Linux the partition begins with an offset 0x56. I suspect that it should be rather 0x80.
I recently tried to make a backup of an ntfs partition using dd.For example.. "sudo dd if=/dev/sda2 of=/dev/sda1" which made a copy of one partition to another, not realizing that it would wipe the ntfs filesystem and image across the linux partition. Is there anyway i can undo this to get back all the data which was on the ntfs drive? Cfdisk still sees the partition as NTFS. Have also tried photorec to try to retrieve the data but to no avail.
View 3 Replies View RelatedI was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View RelatedI have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies View RelatedI had a 40G vfat drive from WIN98 and I used parted to remove the partition, then create a new partition with an ext2 filetype When in parted, and do print...
Code:
(parted) p
Model: ATA QUANTUM FIREBALL (scsi)
Disk /dev/sdd: 40.0GB
Sector size (logical/physical): 512B/512B
[code]....
I used Ping Linux 8 months ago to create a ghost-like image of my primary partition. (Windows 7 on NTFS) The image is on the second partition of my hard drive (Western Digital 250 gig). I need to restore now, but Ping is unable to mount the volume. In fact, it will not mount any volume or perform any new backup. I made sure nothing has changed in Bios options since I created the backup. Does this imply that is not the appropriate tool to work on NTFS system?
View 4 Replies View Relatedrestore of Win XP partition - he wants to be able to "press the button" and restore the whole partition with XP using Clonezilla. Is it possible - to do this restore without Clonezilla CD? And he's planning to have 3 partitions on his HDD:Windows XP system partition partition for backing up system partition partition for personal data
View 1 Replies View RelatedDo i have any chances to restore my windows partition table after tried to install debian and i used the entire disk instead of the free space i had alocated for this
after i figured out what i did i stoped the installation but was to late ... i answered yes at write partition table changes on disk question
i tried win7 automate recovery tool from dvd and manual install of mbr with no successful result
I know i get the error code because i dont have my windows partition. But i seriously need my vista back. I tried using VMware player but it didn't work. Is there anyway i can restore my windows partition without the installation disc? The restore disc does not work as it needs a windows partition.
View 7 Replies View RelatedI installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
I've set up a RAID-1 array /dev/md0 consisting of two partitions /dev/sda5 and /dev/sdb5.The partition /dev/sda5 was formatted "ext2" before mirroring, but now when I "mount -v /dev/md0 /mnt", it says "/dev/md0 on /mnt type ext3 (rw)".Why is the type changed from "ext2" to "ext3" ?
View 2 Replies View RelatedI have already set up, with disc partitioning software (Acronis) , a ext2 partition and a swap space. I have two hard disc drives arranged in a raid 0.
When I try the Debian network install, I am asked to create a partition. The only option that I am given is to partition the whole disc. I most certainly do not want to do this because of all of the information and programs that I have on the other partitions.
I remember from the past that we used to use "Fdisk" to manually partition drives. I was not able to invoke it.
So, the basic question is, how do I direct the install to a partition that is already formatted?
After installing another OS on second drive, UUID for swap on my main system was missing. In other words there is no appropriate symlink in /dev/disk/. I've tried to create it manually, but it dissappears again after rebooting. Temporarily i solved this problem by adding in /etc/fstab direct address to swap device. The question is how to restore UUID for swap partition correctly?
Code:
sudo blkid /dev/sda6
/dev/sda6: TYPE="swap"
/dev/sda6 is swap partition.
Also i've tried to use tune2fs:
[Code]....
I got swap space full error and the ubuntu version of "blue screen of death". I used Disk Utilities to delete a 2.1GB unused partition. When I tried to create a swap space partition (with Disk Utilities) it failed. In the mean time ubuntu did some security updates. When I tried to create again Disk Uilities did not complain but only created a small ~ 500 kB partition. I deleted that and reboot and got "unknown filesystem grub rescue>". I booted from a USB key successfully. Now Disk Utilities and File Browser can see all the partitions and files on the hard drive, but GParted thinks the entire hard drive is unallocated. I vaguely remember that there are two partition table on the hard drive. It may be that one of them was deleted (when I removed the ~ 500 kB partition with Disk Utilities earlier maybe?). It seems at least the other partition table is still intact since Disk Utilities and File Browser can still see all the partitions and files. Is it possible to restore the deleted or damaged partition table and make the hard drive bootable again?
View 9 Replies View RelatedI have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
I ve got a dual boot, XP and FC 12 on a single harddrive. After defragmentation of NTFS partition (With XP installation) cant'boot linux So, rub statrts with boot menu after selecting linux it tries to load linux but prints out some messages again and again (I do not remember contetn of messages) And these messages are circulating
View 14 Replies View RelatedI am about to install a test machine for testing out system configurations and software modifications.Instead of installing a virtual machine I wish to create a secondary partition which holds a "restore image" of the "clean" system. Also I would like to be able to select a system restore function in Grub while booting.
View 4 Replies View Related
