Ubuntu Networking :: Connection Lost After Router Restart
Aug 11, 2010
My ISP pushes software updates occasionally to my router. This also forces the router to restart. When the router restarts, my ubuntu box loses its network connection and does not automatically restore it after the router comes back online.How can I configure ubuntu to restore the connection once it is available again? It happens on my windows workstation...I am using ubuntu on a box with no screen / keyboard / mouse it serves as a fileserver and I remote desktop in. Obviously if the box drops the connection it is a major annoyance. I am using version 9.10
View 1 Replies
ADVERTISEMENT
Apr 24, 2011
Like the title says, is there a way to restart the computer if the internet connection is lost?Is this possible on ubuntu?
View 3 Replies
View Related
Jul 28, 2010
I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
View 4 Replies
View Related
Apr 22, 2010
My 9.10 has lost it connection to my router.Lucid finds it ok as Auto ethO , XP gets on the net ok as wellHow do I fix Karmic ? I click on network, it is greyed out but still lets me edit connections and add wired as auto etho but still no connection.Not sure what else to do ?ifconfig -a shows -
Code:
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:22:15:20:1b:3f
[code]....
View 3 Replies
View Related
May 7, 2010
Following upgrading my 09.04 partition to 09.10 then 10.04, all was working fine until I tried hibernate out for the first time - big mistake! If I can get to a position where i can log on to the system, I find that my ethernet network connection is disabled and I cannot get it to restart. My 09.10 system still works ok. I am tempted to do a clean install of 10.04, even though I'll have to spend some time reloading the extra's and re-configuring.
View 1 Replies
View Related
May 8, 2010
My lan connection to my router isn't working i have it plugged in the cable is good ( fyi i do have some computer knowledge) So my wireless is working right when i booted up but my lan is not. i have a @#$^ i am afraid to say what it is lol dell with their integrated ethernet card. OS: ubuntu 10.04 everything works fine but the wired connection.
Dlink router with all of the settings made properly. i read somewhere about doing a whole bunch of stuff but i thought that since this was a higher version they would have that problem fixed. i also have aim or msn whichever is more preferred. i hopefully will be notified that someone has responded to this thread.
View 5 Replies
View Related
Aug 26, 2010
I am having problems connecting to my new router. It just does not appear in the list of connections under Network Manager. It is not a problem with my laptop's wireless adapter as I can connect to another wireless router. It is also not a problem with the router itself - my Nintendo Wii can pick it up over Wi-Fi and use it and that is further away from the router. It also works if I ethernet it straight into the laptop.The router was provided by Sky Broadband and is a D-Link, pretty standard type of ADSL router with four ethernet ports, wireless and telephone cable socket. I am using the default settings for the SSID and network key, as well as the encryption type (WPA).Ubuntu version = 10.04. The wireless adapter is a very standard issue onboard Intel device but as I say, I can connect to my old Belkin wireless router no problem.
View 1 Replies
View Related
Oct 25, 2010
ubuntu recognizes the router im using that goes to my ps3 but for some reason i cant link the router to my internet connection.
View 1 Replies
View Related
Aug 13, 2011
i recently had to switch routers because my old one didnt work anymore. i have a dual boot machine with win7 for games and natty narwhal (64-bit) for everything else. i'm quite new to ubuntu, i know how to navigate the menu, change settings, install things, just the basic stuff. i dont know how to use the terminal yet except some basic commands for installing and updating software.
after my router swap, my connection for windows was back, although i had to pull out the network cable and plug it back in for this to happen. unfortunately my connection in ubuntu is still gone. i see the connection in network manager, but i cant access the internet through it. i tried setting up a new one with the same settings, to no avail. i connect to the internet directly through my router. i tried finding some documentation for it but havent had luck with that. is there some way to reset the connection? or let ubuntu set up a new one like when i'm doing a fresh install? i think that ubnuntu still thinks i'm using the old router and that this is the cause for the connection fail.
View 4 Replies
View Related
Sep 11, 2009
I'm still kind of a linux newb, so I might just be missing a little bit of knowledge here, but I've been having some real problems getting my machine to connect to my wireless network under Ubuntu 9.04.
Here are my basic specs:
Intel Pentium™ 4 CPU @2.66 GHz
1.5 GB RAM
3 HDDs: 1 40GB Maxtor internal, 1 320GB WD internal, 1 160GB Maxtor USB external.
OSes: Windows XP Home Edition (on Maxtor internal drive) Ubuntu 9.04 (on WD internal drive)
I don't think my video card would make any difference, so I won't list it on here...
Anyway, what happens is I try to connect (I select the network SSID from the pull-down list in the NetworkManager panel menu), and it seems to connect okay to the router, but I can't get out to the net. I can pull up a terminal and ping the router's address, but I get a "Destination Host Unreachable" message. It's as if, to the computer, the router isn't even there on that level, but it can still somehow connect to it.
Now, here's the strange part. If I reset the router from another (Windows) computer on the network (specifically, the one with a wired connection to it), then I can connect just fine and I can get out to the internet.
Even if you don't know specifically, but have some good ideas as to what might work, that's fine too. I hate having to do this every day, as it affects everyone's internet connection. Granted, it's not like I'm in a strict business situation with tons of machines and multiple access points, but there are 3 of us in the house and we all share internet access from the same router (as I'm sure most people do), and I feel kind of guilty having to interrupt everyone's connection, if even only for about 30 seconds just so I can get a net connection under Linux.
Windows connects to the router/internet just fine, btw. No problems there. I'm also using a NetGear WN111 USB wireless adapter, with the Windows drivers under ndiswrapper.
View 14 Replies
View Related
Jan 1, 2011
The connection/network icon that showed next to the clock is gone. i told it to "move", but instead it removed. grrrrr. now when i go to add, i dont see it. same with email.
View 6 Replies
View Related
Nov 30, 2010
Just noticed that auto connection to my wired ethernet is not being established after restarts I'm making. Never recall this in the past. I do get an auto connect when I shutdown and restart. I'm using 10.04 LTS Lucid Lynx.
Also have noticed that nearly every upgrade over the past week or so is calling for restart to complete the upgrade. Can there be any unwanted problems in doing several upgrades over a period of several days before doing the restart? I'd like to think not.
As you can imagine these two issues together are causing some lost time.
View 5 Replies
View Related
May 6, 2011
I am trying to set up an ssh server on my Debian squeeze box so that I can access it remotely when I'm not at home. I connect to the internet through an at&t 2wire modem/router. First off, I *can* ssh into the machine from inside the local network, e.g.
[Code]...
Nmap done: 1 IP address (1 host up) scanned in 2.12 seconds Playing around with Nmap, I also found that it only sees port 50001 as open.
View 5 Replies
View Related
Feb 4, 2010
Previously posted under "Wireless Connection Can't Even Ping Router".I've been using Ubuntu for two years. About a year ago I switched to Kubuntu because I prefer the KDE desktop. Two weeks ago I bought a new laptop: Dell Vostro v13. I installed Kubuntu 9.10 from the live CD and everything worked! Well, almost. I also set up a home wireless network with a new Belkin N+ router from WalMart. When I try to connect to my router, the Plasma Network Manager reports that I'm connected and the assigned IP address, but I'm not truly connected! I can't even ping my own router, all packets are lost.
This problem is intermittent, sometimes I connect fine. I dual-boot with Windoze7 and it connects without problems. Also, if I connect with Windoze, then re-boot into Kubuntu, it seems to "wake-up" the connection somehow and it works. I might also add that I connect without difficulty to other routers in my neighborhood, at work, in airports, etc.My old laptop was also running Kubuntu 9.10, and it connected to the Belkin router without problems, although it was a different wireless card and driver. I also tried Ubuntu 9.10 from the live CD and it also reported a connection, IP address, etc. I couldn't ping the router from that connection either!
View 7 Replies
View Related
May 3, 2010
Dual boot Vista Basic and Ubuntu 10.04 on low spec PC. I can connect to the wireless when I am next to it. I move to the room where the computer is normally used and I lose connection. I can still see it but it fails to establish a connection. Okay, sounds like it's just too far way but when I re-boot and use Vista, it works fine (1 or 2 bars, but it works). Is this a driver issue? Anything I can do apart from move my wireless router?
View 9 Replies
View Related
May 28, 2010
i'm totally new to Linux and Ubuntu. I own a huawei 3g modem through which I connect to the internet. I plan to share the internet from that connection between my Vista pc and another pc running Ubuntu Lucid Lynx. The computer I plan to use to share the internet, let me call it Server, is equalling running Ubuntu Lucid Lynx. My Server perfectly recognises my modem and connects to the internet using it and I can browse.
I plan to connect the routers internet port to my Server using my servers network card. Then i intend to let the router do the sharing of the internet to the other computers on its own. I don't have any idea how to go about doing this. Originally, I tried a direct connection between my Server and the other pc running Lucid Lynx without bothering with the router and using the following settings which i found on an online tutorial:
Server ip 192.168.0.1
netmask 255.255.255.0
and no gateway
then on the client
client ip 192.168.0.5
netmask 255.255.255.0
gateway 192.168.0.1
I used open DNS servers for the DNS
However, i was unable to browse the internet from the client even though a connection between the two was established. Then I thought to myself, why go through this trouble, I have a router so why not go ahead and use it. But then I do not know how to do that. Using the router will enable me to effortlessly connect all my computers irrespective of operating system and ease the network creation process.
View 5 Replies
View Related
Jun 9, 2010
Every time I turn on my ubuntu box, it somehow kills our internet connection... yes, even through the router. The internet will not work until I call tech support and they run a line test. Then it works again as if by magic. I'm at a loss. A friend suggested maybe ubuntu is trying to establish itself as the dhcp server on the network? I have ubuntu 9.04, 32-bit, workstation.
View 2 Replies
View Related
Jun 17, 2010
I bought a wired broadband dsl router to provide another layer of security for my computer running ubuntu. I just plugged it in without installing any software etc. It blocks the internet connection.
View 3 Replies
View Related
Feb 21, 2011
I'm trying to configure my Linksys WRT54G2 wireless router for my DSL connection. I select PPPOE as the connection type and when I go to connect I get the message cannot get ip address from ppoe server.
View 1 Replies
View Related
Jun 24, 2011
I have installed Ubuntu for the first time (version 11.04), finally making the step to open source software. Everything seems to be working fine, however I can't connect to my router via a wired connection.I can use the wireless network,hich was detected and I could connect by giving the code. But when I try to connect to this network by wired network, it tries to connect and it says "connection offline" after a while. It never establishes a connection. I used the standard automatic DHCP settings of eth0. I never got this problem with another OS and it's not the cable that's not working
View 9 Replies
View Related
Jul 3, 2011
We just set up a password for our wireless router (D-link DIR-615). WPA personal. After doing that, I can no longer connect to the internet. I can connect to the wireless router, however. Same problem for the Apple Macs in the house. We called Dlink. The fix for a Mac was to add DNS servers (4.2.2.2) under TCP/IP But there doesn't seem to be anywhere to specify a DNS server in Ubuntu.
View 8 Replies
View Related
Oct 8, 2010
recently i have combined 2 machines into 1. after doing this, the ping to the new machine stops, for no apparent reason, and consequently all traffic to/from the machine also stops. when using the two machines individually this never happened.Lastly, if i restart the network, it kills everything (like the network just wont restart - it reaches the last interface and hangs), and if i reboot the machine, it seems to be fine for about 3-4hours.has anyone seen anything like this when connecting a large number of hosts to 1 gateway, using linux as the router?
View 2 Replies
View Related
Aug 5, 2010
I used to be able to connect to the net using my laptop {Ubuntu 9.10 on Compaq nx7400.}by means of wi-fi . I do not know what I have done but I lost the facility to connect to the net.I noticed the Network Manager disappeared from the notification area. I manged to put it back. It detects the signal from the router and after entering my password it displays Connection Established but I still cannot access the net and does not load any web pages. I have the same Ubuntu 9.10 Desk on a memory stick, when I use it on the laptop it works fine.
I enclose a screenshot of iwconfig.I did sudo lshw -C network and it shows DISABLED. How do I enable it ? Are there any other info that I should supply and what and how.
View 1 Replies
View Related
Jan 23, 2010
I am running ubuntu 9.1 on a Dell Dimension 2400. After installing ubuntu on the pc, it was automatically recognizing my router and connecting to the internet fine via ethernet. Then, my roommate unplugged the router and it won't recognize it. I can't access my router settings, and ubuntu is recognizing it as "inactive" but every other computer in the apartment runs fine. My PC uses a broadcom ethernet controller, and my router is a Linksys wireless N.
View 1 Replies
View Related
Jun 27, 2011
So, when I booted up, the wired connection was automatically detected and in use. Whenever I suspend my computer and then resume it later I lose the wired connection. It is detected (seen) by Networkmanager, but I can never connect. I found a way to restore the connection, but it is manual and I was wondering if I could automate this process every time I resume. Details follow:
Laptop: HP dm1z, Natty 64bit. ethernet card:
Code:
#lspci|grep Ethernet
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Likely culprit (according to dmesg)
[Code].....
View 1 Replies
View Related
Jul 25, 2011
I was running 8.04 and my internet (Comcast) comes via a Motorola SB5100 cable modem then into a Netgear router then into my Dell. When I upgraded to 10.04 yesterday, I lost the wired connection. The wireless connection still works fine, but I have not been able to get a wired connection. Also, most online solutions reference the Network Manager, which is nowhere to be found.
Anyone have any solutions? I would be willing to revert to 8.04 if needed, as that worked fine, and obviously I quite regret the upgrade!
View 2 Replies
View Related
Sep 1, 2011
After I updated ubuntu 10.04.3 and restarted my PC, something weired happend and my wired connection was completely lost. I tried different things but it seems that I have lost my ethernet connection. I only have ethernet card and the interface was set to eth0 which is not recognized anymore.
The /etc/network/interfaces includes the following commands, which btw I tried to play with a bit by commenting and uncommenting the lines but was not helpful (but this is the original one):
Also in /etc/udev/rules.d I deleted 70-persistent-cd.rules hoping that it would be automatically regenerated but it did not,
Here are some messages I get :
lspci:
View 1 Replies
View Related
Aug 20, 2010
Most of the time when I go back to my computer, eth0 has disconnected if left overnight or several hours, and takes around 30 secs to reconnect to my router, finding it a little annoying as the reason I leave the computer on is for quick access to the internet.My computer is connected to the router via an ethernet cable.Used Mandriva and Windows XP on this same hardware for awhile and never came across this.How do I keep the connection to the router active?
View 4 Replies
View Related
Jan 15, 2010
Email my ASDL router IP for VPN connection.My adventure with NX nomachine continues with great success. Thanks for all you input and suggestions - I am still polishing the project but it has been straight forward to date.One questions I have is how to stay current with my ASDL router's IP. I use a Canadian provider with a dynamic IP that is constant for days at a time. Without powering my router down or any power outages, my IP will change. With that IP change, I am unable to login to my desktop.One windows style program I found does the job.It emails my current IP to a predefined email. I am unable to seem to find one for linux.
Ideally I would have a ubuntu program on my desktop (NX server) that would keep me up to date on my IP via email so I can login.Anyone have any experience with that? Or have any other suggestions on how to do this (I dont know the best way to keep that IP up to date besides requesting a static IP from my provider).
View 5 Replies
View Related
Jun 7, 2010
when I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies
View Related
