in 11.04 when you open a program it covers the desktop when you open the next program it covers the first program , How do you switch from the first program to the second one and vice versa.
View 2 Replies
i usually use my pendrive in windows vista but when today i tried to open it in ubuntu 9.10 it does not show up. i know that it is mounted because i could see it in the "USB START UP DISC CREATOR" (IN SYSTEM->ADMINISTRATION->USB START UP DISC CREATOR) [See the screen shot. ]. i think since i had never tried to open my Pen drive in ubuntu before and always open it in win vista, that's why this problem is coming up.
View 9 Replies View Relatedim currently using ubuntu 9.10 in 30gb partition, when i open google chrome, netbeans, pidgin messenger and mysql it causes pc o freeze, which i has to shut down pc by cutting off electricity.
is that due to virtual memory?
Now I have this issue on Ubuntu 10.04. Whenever i close the file browser(am running gnome), it reopens and throws a pop up saying "Cant find /media/A9AE-2182 Please check the spelling and try again."
Now, under /etc/fstab, there is no such device at all. Am wondering, how can i stop this? I click on Close all windows and then shortly it sort of auto-opens and opens 2 file browsers.
Maybe this is related to another issue i have, whenever i shutdown the machine, when i boot it up, on the splash screen it says unable to mount media, press M for manual repair or S to proceed. When i proceed, gnome starts off with no window manager, the windows are without borders and am forced to login as guest and run compiz --replace.
I can't use cd-rw's or dvd-rw's that was previously burned in Windows. I have a lot of them that I still have from my Windows days and want to re-use them. But my Ubuntu can't delete the rw's so that I can use them again. I tried both Brasero and K3b. Both I just get "erase failed". It happens on both my desktop pc and my laptop. Is there a way or and app that will be able to erase these rw's that I can re-use them with Ubuntu ?
View 9 Replies View RelatedI am using xp and ubuntu 9.10 in dual boot mode.Previously when i formatted my xp and reinstalled it the mbr was changed and this the grub did'nt loaded up. Well i am out of that problem but now i want to format the xp from my linux i.e i don't want any other os in this hard disk apart from linux (ubuntu 9.10) so is it possible to format the xp from linux.
will it affect the mbr ? and if yes then wat is the solution for it ? also the drive containing xp should be available for my storage purpose afterwards.
I have a HP laptop that I have had Windows Vista on for about two years. I am soon going to switch it over to Ubuntu. My question is can you safely use the Ubuntu installation process to delete the Windows partition along with all the programs and files it stores on the hard drive or should you first uninstall Windows manually and then, with a essentially blank computer, install Ubuntu?
View 5 Replies View RelatedIn the midst of an epic, hours-long saga of attempting to reinstall Kubuntu 11.04 and get my GRUB menu back in order to dual boot with Windows 7 (I accidentally lost the rambling thread I previously typed, so I'm not going to even tell the back story unless prompted), my installation progress bar seems to be sitting at a solid 86%, reading "Restoring previously installed packages...", something I've never seen before. It's sat there for two hours, not moving a pixel. Is there anything I can do at this point? I've been up for hours trying to do this, and I'm about ready to give up on Kubuntu and even seeing my Windows system again.
View 4 Replies View RelatedI am trying to install the Ubuntu 11.04 in my IBM t42 laptop after the HD crashed. I am trying to install it into a USB drive from another USB drive. Everything went on smoothly until it got stuck at a point where it shows the following message: Restoring previously installed packages... And the progress bar is not moving a bit for almost one and half hour.
View 1 Replies View RelatedBasically I have changed the default mount names for my windows partitions in Ubuntu. They were /media/data, /media/data_,/media/system reserved, etc
They are now /media/C,D,E,F
I have rebooted etc after the changes and when I look in Gnome places or in Nautilis the OLD names still show up.
HOWEVER when I run Nautilis as the root user all the CORRECT NEW names appear.
ALSO - if I create a BRAND NEW user account and login as that all the OLD names show up?
So this is something to do with ROOT access or whatever that is not allowing the names to be updated somehow?!?!?
As I use these disks in windows (obviously) I DONT want to change their labels. and basically this SHOULDN'T be the solution everyone is suggesting!
Root can generate the new names automatically based on the mount point in FSTAB why can't other users - and HOW to do do it MANUALLY?
I am running 9.10 latest updates (as far as I know) My problem is with my usb connections.I cant connect different usb devices to the same usb ports if a device had been previously connected to it. IE: I have to keep my camera connected to one particular port. If I disconnect it and connect anything to it, it cant be seen. It doesnt matter if I reboot. Is there a way to clear out any memory that stores the usb port assignments?
View 1 Replies View Related[URL]You show how to remove a package and it's dependencies. You show how to remove the configuration from the package you are currently uninstalling. You don't show how to remove the configuration data from a package and all of it's dependencies. Why?
View 8 Replies View RelatedI am running Skype installed via yum: skype-2.0.0.72-fc5.i586 on F11 x86_64 My sound is working perfectly under VLC etc. but I cannot get anything out of Skype. Test calls produce deafening silence. I am really unclear on how the sound stuff works.
View 2 Replies View RelatedMy attempts to "dist-upgrade" Lenny to Squeeze ended in disaster. My story is that it was caused by a bug in the "release notes instructions".
Anyone, who wants all the gory details, can find them by visiting
619521@bugs.debian.org.
I would now like to reformat the HD-partition that currently contains the failed "upgrade" and see if I do any better by starting from scratch; it is about 6 years since I have last undertaken such a task and my memories are hazy.
The relevant entry in the Debian (Install) Manual reads:
6.3.2.3. Manual Partitioning
A similar screen to the one shown just above will be displayed if you choose
manual partitioning except that your existing partition table will be shown and **without the mount points**.
My question is:
At what point in the "clean install" does the Debian Installer (set at "medium"?) ask for the "mount point" at which the "root directory of Squeeze" is to be installed?
I am currently running ubuntu 10.10
I have a panasonic 50" and a samsung 23" both of which are 1080p displays. I have twinview setup so that the samsung is my main and the panasonic plasma is my secondary. For some reason every time I open a windows of lets say mozilla and it was maximized prior to closing before, it will "jump" (briefly display on the samsung monitor for a split second and then automatically move to the plasma) from my main display to the secondary panasonic plasma. If mozilla was minimized before closing prior and I reopen it will open to the samsung in the state it was in on the prior close (aka minimized), which is fine. Only when it was maximized prior does it "jump" to my secondary display.
How can I correct this issue? I would like to have programs open (and stay) in the display they were launched in whether it is the plasma or the samsung.
xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
[Code]....
I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.
I have a Hauppauge WinTV card (Bt87 (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.10 and LIRC. I recently moved over to 11.04, copied my LIRC config files over (hardware.conf, lircd.conf, lircmd.conf, etc), and received the error couldn't find any node at /sys/class/rc/rc*
The modules I had previously been successful with were: lirc_dev & lirc_i2c, as is apropriate for my speific card.
I then learned that Natty incorporated a lot of RC elements in to the kernel, and tried following:[url]
Which suggested removing lirc. At this point, ir-keytable also gives the same error about no node at /sys/class/rc/rc*
I think that I am having a problem with the correct driver being loaded for my card. When I look at a dmesg, the relevant section is: (note: I'm not sure if this dmesg was from before or after I uninstalled LIRC and just tried keytables)
Code:
The 3rd last line makes it seem that the IR capabilities have been recognized further confusing me as to why no /sys/class/rc/rc* has been registered. I've attached an unedited copy of my proc/bus/pci/devices, and below is my lsmod.
Code:
So I think it's a problem with the resolution not changing back. But I don't see any menu, like the HP Logo, on my monitor at all. Thought It might be the blue cable, changed it, nothing. Plugged it back into TV and it works fine.
View 2 Replies View Relatedanyone please tell me how to uninstall the previously installed unwanted softwares, in fedora 13(i'm using an 64 bit system).
View 4 Replies View RelatedThere are some files on my external disk drive that are corrupted and not identifiable. How can I recover these files?
View 1 Replies View RelatedIs there a way or command to keep track all the previously run applications from all terminals that are connected to your linux machine? Something that will display the name of the application, start time, and end time of its execution?
View 3 Replies View RelatedHow do you determine the source and version of a device driver in your linux box? (The wifi driver, for instance.) In windows you can find that info using "device manager". I suppose there is some corresponding tool in linux.
View 2 Replies View RelatedI want to use PROMPT_COMMAND variable to build a history of all the commands i execute. So Basically i want to append the last executed command to my own command log file. How can i find the last executed command ?
I want to add PROMPT_COMMAND="echo $last_executed_command >> my_command_log" But I am not sure how to find the last executed command
I added a formatted LVM hard drive ( hdb: WDC WD800BB-55JKC0, ATA DISK drive) to my current server. I need to review its contents, save any data I need, and then reformat the drive and extend the current systems LVM to include the new drive. I am unable to mount the new drive using the following steps and need to mount the LVM new drive. As I explain below, I have learned that I am not supposed to directly mount an LVM volume. Here is the work I have done to date,.
1. MAKE SURE THE DRIVE IS FOUND:
dmesg | grep drive
hda: MAXTOR STM3160215A, ATA DISK drive
hdb: WDC WD800BB-55JKC0, ATA DISK drive
[Code].....
is it possible to log the command output's history that are previously printed messages in the terminal to a file? that is the first command output when i first opened terminal through the last command.
View 5 Replies View RelatedI've been trying to discover how can I recover data from a hard drive that as been previously configured with LVM, although not encrypted,but I have been having mixed results. I've been using LVM more and more lately to configure hard drives and my greatest fear is to have a motherboard fail on me and get locked out of the contents.
View 8 Replies View RelatedI'm having a problem going from F12>F13 using preupgrade with a wired internet connection. The current F12 installation is up to date. The upgrade crashes with the "the root for the previously installed system was not found". I've also tried upgrading using YUM and was also unsuccessful. Has anyone run into this problem with this upgrade?
View 6 Replies View RelatedI am ssh'ing into a remote server and then su'ing to root.The problem is that sometimes, I have not paid enough attention to the console message, and I have accidentally typed in the root password at the command prompt (when for example, I had failed to provide the root password correctly the first time - so su prompt went away).
I remember reading somewhere that a history of commands typed at the console is kept somewhere.I have 3 sub questions
Where (which folder) is the file stored?
Can I edit that file and remove the root password from it?
Being the paranoid person that I am, I wonder if there is a more secure way of logging into my server - other than ssh (or am I being TOO paranoid?)
My server is running a headless Ubuntu 10.0.4
I had Ubuntu 10.04 installed with great compositing performance on my Radeon HD 3450 card, and I installed Ubuntu 11.04 last night. I can't get into anything but Ubuntu Classic (No Effects) to actually use the computer. Whenever I log into Ubuntu Classic (w/ Effects), I can hear the start sound, the panels and some shadows show up, but immediately after they first render, I can't touch anything, shadows disappear wherever I click, and it freezes, forcing me to drop to a tty and kill X.
Whenever I try to start Unity, I hear the start sound, but never see anything but the wallpaper. Also, the screen will sometimes go black for a second or so before returning to the same frozen graphics available previously, and sometimes I can't even drop to a tty after it does this. From glxinfo, everything seems to be in order. Here is the relevant data.
Quote:
direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on AMD RV620
OpenGL version string: 2.1 Mesa 7.10.2
OpenGL shading language version string: 1.20
So far as I know, Unity should support OpenGL 1.5+ capable drivers/cards, and compiz should support even lower requirements. As I said, on the LTS release the drivers performed admirably well, far better than fglrx on the same card- much more fluid, no jerkiness. I can get Unity working with fglrx, but it's quite depressing to watch, and I don't plan on using it when I have an open card that should work well. I am aware that there were recent changes to the kernel to bring in the Gallium driver for R600 cards- I've read something about r600g and r600c and one of them being used in Ubuntu. I'm supposing the recent change is what's causing these issues, and I'm curious about how to change them back or correct whatever is causing these problems.
I am trying to Upgrade from Fedora 12 to Fedora 13 using Preupgrade. My system downloads the the Upgrade and tries to install it but returns a message "Root of the previous system not found". I would really like to fix this problem but dont know how.
View 1 Replies View RelatedI have just had to reinstall my OS (Sabayon) onto a new and larger hard drive (dying old disk). I quickly saved all my old docs in /home on an external USB drive (formatted and then created an ext4 file system) before the swap and installation.
After getting the new disk running I connected the USB external disk. First I could not access the drive at all, but that seems to be fixed. Now I want to bring all my files back to my new /home folder but apparently they (especially the former MS Office .doc, .xls, etc files, not so much the OpenOffice files) are �read only� and I don't have permissions anymore. I am able to create directories on the external, and can move files back and forth, but don't seem to own many of them.Sabayon automatically mounted my external disk in /media/disk, rather than /mnt, so I've left that alone for now. After searching here and elsewhere for info, I tried a few things (below): For access I added a line to /etc/fstab:
Code:
/dev/sdb1 /media/disk ext4 noauto,rw 0 0
Here's what I've done to try and fix ownership already:
in /media I:
Code:
# chmod 775 disk
which gives output of:
Code:
media # ls -l
total 4
drwxrwxr-x 2 root root 4096 Nov 1 21:30 disk
[code]....
I'm not sure what the �total 4� refers to since there is only the one directory �disk� inside /media but I assume that's not part of this issue... Does adding umask=0 have anything to do with this, and if so where does that go?
