Ubuntu :: Printer Job Started / Finished But No Prints

Feb 16, 2011

All seems well in Ubuntu printer setup and drivers. Cups, hpijs hplip etc., system finds printer and sets it up and from system/administration/printing the printer shows up with the right description Hp deskjet d2600 on local host. when I try to print I get message "started job" and another message "finished job" but nothing prints. The log Var/log/cups/error_log shows only one thing that I think is wrong "cupsd authorize:no authentication data provided". my user name john and one other Andy (I installed) show up in lp group. I could attach the whole error_log file if it would help. I am new to Linux but love it. I used Windows NT for years. I am the administrator on the box. Don't know what to try next.

View 11 Replies


ADVERTISEMENT

Ubuntu :: Intermittent Usb Printer - Sometimes The Printer Prints Sometimes It Doesn't

Mar 24, 2010

I have a parallel port printer connected using usb->parallel adapter. Sometimes the printer prints sometimes it doesn't.

A job will go the print queue and then sit there for ages. Sometimes if I unplug and then replug the usb->parallel cable the printer will print other times it will print half the document then freeze until the cable was unplugged and replugged again.

The printer never shows up in the list using lsusb (only my usb mouse and scanner do).

The printer is an hp deskjet 690c and worked fine under WinXP through a normal parallel cable. The one thing I haven't tested (but will test tomorrow) is the usb->parallel cable in XP.

View 1 Replies View Related

Ubuntu :: XP Can See Printer As Ready But Nothing Prints / Fix It?

Jan 12, 2010

I have my Epson C46 working on my Ubuntu 9.10 machine, my XP machines are showing the printer as ready and will send a test page to the Ubuntu printer but it doesn't arrive at Ubuntu - doesn't show in the print job list on Ubuntu but does in XP??
File sharing is now working in both directions.

View 3 Replies View Related

Ubuntu :: Printer Idle - Job Prints Like 5 Min Later

Apr 27, 2011

I have an HP J4680 all in one that, for some reason, does not process the print job immediately when I send it. When I open my printer's properties it will list the printer's state as idle and when I go into the print que it tells me the job is scheduled for . . . (some time) which is, I think, about 5 min later by the clock on the task bar. I've been all over the settings and don't see anything that looks like it applies to that. Usually I've been restarting the printer and computer and then it will print when I send the job. Tonight I waited until the time and it did print according to the scheduled time. I need to find a way to always have it print right when I send the job.

View 2 Replies View Related

Ubuntu :: HP Printer Only Prints Green From Firefox

Aug 29, 2010

We have an HP F4135 printer which has worked fine for at least 2 years, now, but it has started acting up since installing Ubuntu on our computers.

We had been running Windows XP on the computer to which the printer was connected, but ever since we "upgraded" to Ubuntu the printer has been printing green in place of black whenever using it to print any sort of document from Firefox. This isn't black mixed with green; it's a bright, lime green.

For some reason, it works fine when it's printing something directly from the computer's hard drive, like a document, .pdf file, etc. It's only when printing from Firefox that it starts messing up, whether it be a file opened temporarily from a website or the direct contents of a web page.

We've tried adjusting the printer settings and the only thing that makes a difference is changing the Printout Mode from Normal (Color Cartridge) to Normal Grayscale (Black Cartridge). This seems to be the only thing to stop it from printing in green, but that really isn't a good fix, since it makes all the other colors turn to black, which isn't really fixing the problem.

View 1 Replies View Related

Slackware :: HP Deskjet 990C Printer - Nothing Prints

Mar 14, 2011

I'm running a standard 13.1 32 bit install with an HP deskjet 990C, run off of USB. Until today everything has printed properly. Now nothing prints. Nothing has been installed unless it came through slackpkg, and yes it is still on the correct setting for arch and revision. CUPS shows printer as installed, accepting jobs an idle. No error messages are appearing but nothing is reaching the printer. The info I can glean is from the error logs in CUPS:

[Code]....

View 4 Replies View Related

Hardware :: Ubuntu Recognizes Printer - Adds To The Queue - But Nothing Prints

Aug 10, 2010

I'm using Ubuntu 10.04, and I have an HP D1660 printer. The printer has already been added, and HPLIP is installed. I can't get anything to actually come out of the printer, even though I can send a job to the printer. Does this have anything to do with CUPS?

Here are some of the last error log messages after using the printer troubleshooter (I only included some because it's a long list):

View 1 Replies View Related

Hardware :: Printer Prints White Space Very Slowly?

Feb 12, 2011

I have successfully gotten my Canon MX300 Printer to work with CUPS. The printer works great, but for some reason it prints out white lines incredibly slow. The printer acts as if it is printing out actual text, e.g. if I have half a page of empty space, it prints it line by line for some reason... Anyone know what may cause this? I know that CUPS is not ideal with all printers, but it did not do this at first actually.

View 2 Replies View Related

Server :: Samba Shared Printer Prints Garbage

Jul 28, 2009

Just recently got a few printers connected to the network at my shop and I've managed to get them connected in with samba for the linux clients. Whenever I try to print from one of the clients, the printer will click on and whiz away, but only prints on the first page stuff that looks like this:

Code:
%!PS-Adobe-3.0
%%BoundingBox: 38 24 574 768
%%Title: Enscript Outpu
%%For: User N

It seems to me that the printer isn't processing the postscript data properly (or I'm just not sending it in the right format) but I'm at a loss as to how to go about fixing it.

View 4 Replies View Related

OpenSUSE Hardware :: Printer Prints Black Horizontal Lines

Jan 14, 2010

I have an HP Printer which prints black horizontal lines after each line or colors an entire blank line black, so a blank page will come out all black. Others who have access to the Printer are able to print well, without any problem.

View 1 Replies View Related

Hardware :: Setting - Printer Pulls In Paper But Prints No Image

Nov 1, 2009

I've encountered some problem in setting my printer HP D1560; the printer pulls in paper but prints no image. how to set it running under WinXP?

View 5 Replies View Related

Hardware :: Network Printer Setup - Eth PC Only Prints Test Page

Jul 22, 2009

I have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.

View 1 Replies View Related

Ubuntu :: Brothers HL2170W Printer - Send A Page To Print It Takes 5 Minutes Before It Prints

May 15, 2010

I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.

View 2 Replies View Related

Debian Hardware :: Mc4695MF - Test Page Prints Fine But App Prints Blank Pages

May 19, 2014

I'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...

KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).

Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).

It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.

So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...

Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...

View 0 Replies View Related

Ubuntu :: No Sound In KDE When Started By Startx While Working Fine When Started By Kdm/gdm

Dec 14, 2010

I recently installed KDE in my ubuntu 10.10. To access KDE, I want to use
startx /usr/bin/startkdeBut using it disables sound in KDE (Sound is working fine in GNOME). It doesn't sound for anything like login sound, totem, mplayer or any other playerBut when I press Alt+Ctrl+F1 to change to virtual console, the playback resumes from where it was in time and when coming back Alt+Ctrl+F7 and the time in totem (or any other player) doesn't move. While log out also it doesn't play logout sound and doesn't logout, so I have to press Ctrl+Alt+F1 so that logout sound play then it exits.When starting KDE by kdm or gdm, the sound works normally. But I don't want to login again using kdm or gdm and not to use root user to start kdm or gdm.I don't know what is the difference between when KDE is started by startx or by kdm/gdm where the same user login in kdm/gdm as that for startx

View 2 Replies View Related

Debian Installation :: When Connect The Printer, Doesn't Recognize Printer As The Photosmart B109 Printer For Unknown Reason?

Jan 3, 2011

I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?

View 7 Replies View Related

Ubuntu :: Set Rtorrent 0.8.2 To Send An Email When Finished?

Jan 16, 2010

here it says that i can send an email on complete, but i dont havew the newest version of rtorrent, [URL] how do i set rtorrent 0.8.2 to send an email when finished?

View 1 Replies View Related

Ubuntu :: Set Transmission To Shutdown The PC After The Torrents Are Finished?

Jun 14, 2010

Any option?Only thing i saw for shutdown for Transmission, was for Mac, none for Linux.

View 1 Replies View Related

Ubuntu :: Chromium Donwload-finished In Notify-osd?

Sep 12, 2010

I wonder if is possible to have a "download finished" notification in Chromium when... well, when a download finishes.

View 1 Replies View Related

Ubuntu :: Only Logo After Finished Installation's Restart?

Dec 13, 2010

i managed to install 10.10 with nomodeset parameter but now i am facing a new issue. After the installation finished i was forceded to restart my system in order the installation to get done. I did it but i ended up with a black screen and ubuntu logo in the middle of it. Do ihave to go through recovery mode and enter something?

View 2 Replies View Related

General :: Installing Printer - Add Printer In Local Network Or Windows Printer Via Samba

Nov 23, 2009

I just upgrade to Fedora 11.

I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.

The summary is as follow:

I have download a printer driver and had installed but got error when I tried to printer a test page.

View 6 Replies View Related

General :: Know When Dd Command Has Finished?

Nov 19, 2010

I'm trying to put zero in one hd (60GB) toshiba. So i use the command sudo dd if=/dev/zero of=/dev/sdx. I learned to see the status and now after 24hrs the status is:

Code:
111108189+0 records in
111108189+0 records out
56887392768 bytes (57 GB) copied, 85620,7 seconds, 664 kb/s

So, when do i know when the task is complete? I thought that when reached about 55GB has stop. Because one hd with 60GB has actualy 55GB.

View 5 Replies View Related

Ubuntu Installation :: Automate Shut Down Computer After Cron-apt Job Finished?

Jul 9, 2010

Hopefully a simple question but one I have had a hard time finding:I am using cron-apt to automate updates as follows:

Code:
graham@graham-desktop:~$ sudo cat /etc/cron.d/cron-apt
#

[code]....

View 3 Replies View Related

Ubuntu Installation :: Accidentally Canceled Upgrade To Maverick Before It Finished?

Nov 1, 2010

I accidentally cancelled the upgrade (ctrl-c) to maverick before it finished on one of my servers. It was during one of the questions about installing an updated config file. If I run "sudo apt-get dist-upgrade", it complains that it can't lock the directory /var/lib/dpkg. What can I do to recover this and continue with the upgrade?

EDIT: forgot to say this system is running ubuntu-server with no GUI

View 2 Replies View Related

General :: File Has Finished Uploading From Another Location?

Jun 5, 2011

Let's say we have machine 1 and machine 2. Machine 2, which is linux based, is receiving a file (let's say cat.jpg sent via SCP from machine 1 (doesn't really matter which operating system..) How can I know in machine 2, that the file has finished uploading from machine 1 ? Please note that by "knowing" I mean by running a command (via a cron that runs every minute), and not by an event driven way ("make the scp issue a command when it is finished uploading"). Another limitation I have is that I can't change anything in machine 1 or in the way it SCP files.

If it really matters: the files being transferred are video file, MP4 extension. machine 2 is ubuntu 10.10

View 5 Replies View Related

Debian :: Get Rid Of Annoying Beep Whenever Squeeze Finished Boot?

Jun 8, 2010

I'm using Debian Squeeze on my Presario CQ40-115AU. Whenever Squeeze finished boot (when the login screen appears), there a loud beep sound come out. The same sound also come out when rebooting/shutting down my laptop and this had never happened when I'm using Lenny. Where can I configure so the sound won't come out ever again.

View 2 Replies View Related

Fedora :: No Errors But After Finished Click To Start Skype Nothing Happens?

Dec 22, 2010

i just installed skype after downloading it from the officail site fedora package installation went smooth with no errors but after finnished i click to start skype nothing happens

View 7 Replies View Related

Fedora :: Install Matlab2011 In 15 - Permission Denied Finished

Sep 1, 2011

I wanted to install Matlab2011 in fedora15 and i receive this following: Preparing installation files Installing ./install: line 589: /tmp/mathworks_2110/java/jre/glnxa64/jre/bin/java: Permission denied Finished. I think the problem was Java, but I updated java and still is not working.

View 1 Replies View Related

Networking :: Finished Reconfiguring My 1st PC Centos 5.5 With Squid And Dansguarian?

Feb 8, 2011

I have finished reconfiguring my 1st PC Centos 5.5 with Squid and Dansguarian. Works fine the configuration is basic.lets name it to 1st PCeth0 - modem ip (public)eth1 - 172.16.1.1 (LAN)Then I've decided to change and add another Centos 5.5 for Firewall Service that is directly connected to the modem and then shares internet connection and some ports to 1st PC.

lets name it to 2nd PC, it also has two NICSeth0 - modem ip (public)eth1 - 10.0.0.1 (ip to connect to the 1st pc with squid services)so I changed the ip of the 1st PC with theseeth0 - 10.0.0.2eth1 - 172.16.1.1 (LAN)and connects the eth0 (10.0.0.2) of the 1st PC to the eth2 (10.0.0.1) of the 2nd PCthen I've tried browsing on the network but it does not work...is there a simple iptables command for the 1st PC and 2nd PC?

2nd PC (firewall to be)
#vi /home/user1/fw.sh
#!/bin/sh

[code]....

View 1 Replies View Related

OpenSUSE Multimedia :: Error Is:"Mplayer Has Finished Unexpectedly?

May 25, 2011

I have observed a recurring problem with video files. Very often the error stated below occurs when I try to play few files, but not when playing few other videos.The error is:"Mplayer has finished unexpedtedly. Exit code: 1"How can i get rid of this recurring error.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved