Clients are not able to access FTP thru browser: ftp://IP.When you open it thru browser, it does not ask for a usename or password but shows a PUB diretory instead. I tried to telnet port 21 and shows that it is using VSFTP instead of Plesk's ProFtp.
View 1 RepliesUntil today Plesk 9.3.0 works finely on my ubuntu 8.04 dedicated server. Then i tried to install proFTPd and after that Plesk chashs.
Now i want to reinstall my plest but i have a problem i get lots of error messanges like that
Quote:
How can I remove completly plesk and install it again?
which is the best vsftpd or Proftpd or Pureftpd ?
which is high secure and reliable ?
Pureftpd or Proftpd can install on Centos ?
The thing is I need a bigger server, but at the same time I'm having problems with cpanel and centos and I'm quite bored. So now I want to migrate from my cpanel server to the plesk server keeping the domain and it's content. I tried to create a ticket in plesk support but either I didn't bought the server yet. So, what's the quickier and safest way to migrate? Is there any script?
View 1 Replies View Relatedi have a quick question about using plesk on centos 5.x server and installation of ssl certificates. if anyone out there has expertise with above,
View 1 Replies View Relatedwhich one are we supposed to use? there is a conflict.
View 3 Replies View RelatedFedora 12 64bit I need nbd-client which is supposed contained in kbd package.
$ yum list kbd
Code:
Loaded plugins: presto, refresh-packagekit
Installed Packages
kbd.x86_64 1.15-9.fc12 @fedora
kbd already installed.
[Code]...
By default, when applications run, they are limited in the amount of RAM they are allowed to access right? Technically my VLC could not access memory addresses used by Chrome. But how is it possible for the operating system/compiler to mistakingly allow access to an address a code is not allowed. I know alot of 'exploits' and 'payloads' take advantage of this fact and create variables that take up too much space and 'overflow' into other addresses, but how does this actually happen?
Are some programs more prone to this than others? Does it matter in which language they are coded in? For example, I know C is allowed to play around with memory, while Java is not. Also, what are the advantages of this? What if someone wrote malicious code to access someplace in memory, what could they do? The only thing I can think of is passwords/keys stored in RAM.
PS I thought about putting this in Stack Overflow, but my question is much broader than just specifically related to a programming perspective. If I've placed it in the wrong place, I'm sorry.
Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies View RelatedHow can I configure proFTPd to deny all unless:User is part of group: ftpguysClient IP matches either: 1.1.1.1 or 2.2.2.2 or 3.3.3.3I already have the config file (proftpd.conf) setup to only allow users who are part of the group ftpguys. To do that I use this:
Code:
<Limit LOGIN>
AllowGroup ftpguys
[code]...
difference between cpanel and pleak? for which service they are being used?
View 2 Replies View RelatedI'm installing OpenLDAP on a VSP server, CentOS 5 with Plesk at 1and1. I've tested the slapd.conf file with slaptest and it returns ok. I've tried to start ldap with /sbin/service ldap start and it says it is ok and starts. But if I try to run ldapadd I get an error message saying that it could not contact the ldap server. I check the status with /sbin/service ldap status and it show that it is not running. I can do /sbin/service ldap start, it will say it started and turn around and check the status and it will show that it is not running. Would something in Plesk be killing ldap as soon as it starts? I installed OpenLDAP via yum and have been following directions found in a couple of ldap guides.
View 5 Replies View RelatedCan a Fedora server be remotely managed with Plesk and/or Cpanel or only via SSH?
View 1 Replies View RelatedI am trying to determine which version of Ubuntu we have installed on our Webfusion VPS in order to see how to update to specific php and mysql versions needed for installing some software.
uname -a gives this:
Linux [hostname] 2.6.18-028stab070.2 #1 SMP Tue Jul 6 14:34:09 MSD 2010 x86_64 GNU/Linux
I don't see anything that matches up to any of the Ubuntu releases. Is there any other way to determine what we have?
We have Plesk 9.5.2 on the machine.
Certain software we need to install requires PHP 5.2.10+ and Mysql 5.2+ but we currently have PHP 5.2.4-2ubuntu5.12 with Suhosin-Patch 0.9.6.2 and Ver 14.12 Distrib 5.0.51a
how to get the required versions of php and mysql (without breaking Plesk)? I tried editing /etc/apt/sources.list to add a new repository and using apt-get upgrade php but I probably did not add the correct repository.
I have installed vsftpd by "yum -y install vsftpd",disabled anonymous login and set .When I use a linux client's file browser to login using a user account "ftpacc" by ftp://ip_address, its location is "/" instead of /home/ftpacc".When I use a window client to login, its location is "/home/ftpacc"
View 1 Replies View RelatedI am managing a Fedora dedicated server with Plesk 9 and just recently moved the email for one of the domains on the server to Google Apps for business. Unfortunately, I cannot get email messages from the website forms to deliver to addresses on this domain. For anyone familiar with Plesk, I have disabled mail in the hosting settings by un-checking the "Activate mail service on domain" checkbox and there are no accounts in the domain. (Other readings have indicated that this should be enough to allow mail to be directed to the appropriate server). My MX records correctly point to the google apps mail server.
I'm quite comfortable with command line, but I know almost nothing about the sendmail program or its alternatives and my attempts at researching how to set up this relay has been futile. I'm pretty sure I'm using sendmail and not qmail or anything else from what the red-hat style "alternatives" symlinks point to. I've also checked the /etc/mail/access, domaintable, mailertable, sendmail.cf, virtusertable, local-host-names, sendmail.cf, and submit.cf and most of these files are empty (except the .cf files), and the sendmail.cf and submit.cf make no reference to the domain in question.
Here is the output from a sendmail test that was was not received. (Private data omitted of course).
sendmail -v xxx@yyy.com
test email from yyy.com webserver. please ignore.
xxx@yyy.com... Connecting to [127.0.0.1] via relay...
220 my.server.com ESMTP
>>> EHLO my.server.com
250-my.server.com .....
Closing connection to [127.0.0.1]
>>> QUIT
Performing the same test and sending an email to a non-hosted domain works fine.
I have installed Vlc Media Player ... I use fedora14 when I want to run it, it says "VLC is not supposed to be run as root. Sorry. If you need to use real-time priorities and/or privileged TCP ports you can use vlc-wrapper (make sure it is Set-UID root and cannot be run by non-trusted users first)."
I found something that said: " configure --enable-run-as-root "
But this is my question that now that I have installed Vlc, what should I do? where should I do the configuration?
See screenshot attachment. I know there was going to be changes to GNOMES appearance, but I thought it was just moving Close/Maximize/Minimize to the other side. If the screenshot is correct I'll just adapt and move on, if not how do I fix it?
View 5 Replies View RelatedI don't mean this to be in any way a critical post but I've recently switched to Debian from numerious other distros because of it elidged stability and speed. However I'm using the stable version and frequently have to reboot for certain things to work and frequently multimedia based programs crash on me. I've installed the repo from debian-multimedia.org so I don't know if that's causeing any problems. It crashes on me multiple times a day. Now it's not the OS itself which is the problem I'm sure but more the software in the repos. However it was my udnerstanding that this software was pretty darn well tested.
View 14 Replies View Relateddid a fresh install of 10.04 on the wife's laptop. But the visual feedback of the booting process in kind of weird. Here is what I experience: This is on a laptop with intel graphics card. cat /proc/fb prints inteldrm. Which one of these is 'Plymouth' or where in the above stages is it supposed to appear exactly? Isn't Plymouth supposed to give me a flicker-free booting experience from Grub - to - Desktop, atleast on Intel-based computers? How do I fix these flickers? I tried the FRAMEBUFFER=y fix and it only eliminated the blinking cursor but I still see the screen going black and flicker.
View 1 Replies View RelatedIs the ctrl-alt-del > shutdown feature that used to live in 9.10 supposed to be missing in 10.04?
View 5 Replies View RelatedRunning Natty Narwhol. IIRC, the F1 key was the "help" shortcut. Now F1 does nothing. Is F1 supposed to be the "help" shortcut key or has this changed?
View 1 Replies View RelatedI've been working on it for over 20 hours and I'm stuck. It asks the user for input and then prints a shape of a certain length.
View 4 Replies View RelatedI'm finding the NetworkManager applet very confusing.When I start up at a new location I can use the "Connect to Other Network..." menu item to bring up the list of available networks, and I'd expect that by selecting one of these and clicking "Connect", then configuring and clicking OK, I'd get a connection. Instead the dialog just goes away and nothing else happens. Is something broken with NetworkManager, or am I misunderstanding how this is supposed to work?
By switching back and forth between NetworkManager and ifup I'm eventually able to establish a connection to a new access point, but it's been a painful process.I've also encountered a problem reported by others, where when my system fails to suspend/resume properly the /var/lib/NetworkManager/NetworkManager.state has NetworkingEnabled=false and I need to manually edit this before restarting networking... but that's a separate issue, and I can work around it with the manual edit (or just add a startup script to do this automatically).
Has anyone had success with integration of Gwibber and Flickr and if you did how did you do it? The actual text I tried adding my flickr account to Gwibber in Ubuntu 10.04 Lucid Lynx and in the end I am not sure if it works or not. There is a documented bug related to Gwibber and Flickr. [URL] Now I did check my screen name (which is naggobot) and I used that and also every other id I could imagine, including direct http link
[URL]
and yahoo email address that is tied to Flickr account. In the end I did manage to get some input to the Gwibber window from the Flickr account but that input was from photo stream of a contact of mine. So my question is has anyone had success of getting their photostream from Flickr to Gwibber? If you succeeded in this how did you do it i.e. what did you fill in to the user name field? Please be super accurate.
I've upgraded to Kubuntu 10.10 but there is nothing in my system tray popping up telling me there are packages to upgrade (there are 83 btw!). What should be running? In control panel->software management->settings I can see I have "notify when updates are available" ticked, but I've not been notified of anything. What can I check or install to sort this out?
View 3 Replies View RelatedFedora 12 64bit. I need nbd-client which is supposed contained in kbd package.
$ yum list kbd Code: Loaded plugins: presto, refresh-packagekit
Installed Packages
kbd.x86_64 1.15-9.fc12 @fedora
kbd already installed.
But I can't find kbd-client;
[Code]...
Does someone know of a solid article on what files to back up to restore a vsftpd server onto another server?
Right now i'm backing up the ftp directory structure with all the files in it, but no configs, users, etc
I have ubuntu 8.04 which is running vsftpd with following config ( in standalone mode )
Code:
# Standalone mode
listen=YES
max_clients=200
max_per_ip=4
[Code]....
i am having problem with
"/etc/vsftpd/vsftpd.conf"
the rule in file(/etc/vsftpd/user_list) says that if "userlist_enable=NO" is set in vsftpd.conf then only users which are listed in
[code]....